SB (model 0220) Live 5.1 NOT RECOGNIZED by the computer (under Windows

What do I need to do? Thanks.

Guys: I'm new to this forum and to Creative SBO220 sound cards. I just bought an OEM card and installed it on 6/22. I had trouble with no sound until I realized that I had to go to Control Panel>Sounds and change my defaults. After that, the sound was there. Check it out.
If you need any more help, post back.

Similar Messages

My ipod video is not recognized by the computer what should i do/

my ipod video is not recognized by the computer what should i do?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the PC?
How to reset iPod
Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

When I was restoring my iphone4, at the end of restoring the settings an error occured and it turned off by itself and now it is not recognized by the computer or by the itunes, what to do?

Hey guys
When I was restoring my iphone4, at the end of restoring the settings an error occured and it turned off by itself and now it is not recognized by the computer or by the itunes, what to do?
thanks

A device that has been jailbroken cannot be discussed on these Communities...Apple will not help you as that voids your warranty.

My iPod Shuffle 4th generation 2GB is not recognized by My Computer in Windows or under Devices in iTunes.

Everyone has the same problems. My iPod has been plugged in properly, I have followed all the support suggestions but nothing works. HELP PLEASE!

I have downloaded that utility but can not use it, as
when I plug the shuffle into the USB port, it is not
recognized by either computer I am using. I can not
reset or restore, because in order to do that the
computer would have to know the shuffle is plugged in
and it doesnt. I have tried this on two different
computers and get the same result, so I dont think
its a computer issue, its an ipod issue. I also used
to be albe to play the shuffle on the Xbox 360 and
now can not.
Just as a check, did you actually follow the THESE directions...EXACTLY?
Using iPod shuffle Reset Utility
1. Quit all running applications on your computer.
2. Open the iPod shuffle Reset Utility.
3. Connect iPod shuffle to a USB port on your computer. Do not connect iPod shuffle to a USB port on your keyboard or other non-powered USB hub.
4. Click the Restore button. If prompted, enter an Admin user name and password.
5. The restore process will start.
6. When it is complete, quit iPod shuffle Reset Utility and open iTunes to sync music to your iPod shuffle.

My ipod not recognized by the computer or itunes?

Ok, the iPod works fine playing music and watching videos and everything else it is supposed to, and it charges fine. But when i plug it up my PC to sync new music, the screen on the iPod does like normal and goes to the gray and orangeish screen that says Connected, then immediately says Disconnecting iPod and shows the little progress bar as if you had ejected it. How can it do this on it's own before anything has recognized it?
I have done everything that the Support on here has said, the 5 r's and all that, and nothing. Checked device manager on my computer and it actually says that is is plugged up and recognized, but has a yellow exclamation point beside it. The properties of it says this error...
"Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)"
These errors occurred two days again until now, i have made no recent updates on my computer or iPod to have damaged anything but these problems randomly occur. it's really odd and if someone could help me it would be great.

Have you carefully worked through each and every suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock

Lenovo s860 1Gb RAM not recognized by the computer,camera and gallery problem

Hi,yesterday i received a shipment of 2 phones s860. Both are installed VibeUi .20 same version. No problems with 1 of them, but other... 1.Camera can't save image.When thry to get picture,camera app close, same problem with another camera app. and after clear cashe and data on lenovo camera and gallery app, and after full wipe and full clear data with lenowo recovery menu2.tried to send video to reproduce because of the factory clip gives an error - damaged file. The received file can also not be reproduced, damaged file. When try to play with another player(km,mx) no problem,when send picture to phone with shareit - no problem3. when i turn the phone to a computer, he did not recognize, did not indicate the inclusion of a device (tried 3 different computers-no sound on computer,no device manager device-nothing) But the phone is charging, do not ask me what kind of connection I want (only charging or transfer MTP ...nothing) The animations are quite delayed .When entering in recovery menu screen is displayed bands as a problem at the video chip(It may be normal traits do not appear in other use)I have not yet tried 3G/2G slotsperhaps the software is installed by mistake and nobody has tested before sending phone to me. The problem is that I can not connect to the computer to try to reinstall again, not only reset
I enabled usb debuging from developer menuSorry for my english I hope someone understand my words up there
Phone have root,lenovo recovery menu,test menu think : 感应器校准       Sensor Calibration
自动测试           Automatic Test
单项测试           Individual Tests
测试报告           Test Report
调试测试项       Debugging Test Items
浦除e MMC       Format e-MMC
版本信息           Version Information
重启手机           Restart The Phone     (if translation who i find is good)

Its upgradable so that if you choose the 64 bit version of Windows you can do so
and take full advantage of the 4 GB. If your notebook had come pre-installed with
64 bit OS then it would have likely came with the 4 GB already and cost a bit more.
The manufacturers should be a little more clear to people who dont understand
the differences. Your machiine came with 3 GB because they, HP, knew that the 32
bit version of Windows installed would only use and see that amount.
You can leave the 4 GB in. It wont hurt a thing. If you decide to switch to the 64
bit version you will have to start from scratch on the installation. Not recommended
if your not familiar with the process.

The Reader Wi-Fi is not recognized by the computer or Reader software.

Solved!
Go to Solution.

When this situation occurs, the Reader™ Digital Book will not appear in the software or the software may shut down when connecting the Reader Digital Book to the computer. Follow these steps to resolve this problem:
NOTE: Because each of these steps represents a possible solution to this problem, open the Reader software and connect the Reader Digital Book to the computer after completing each step.
Make sure you that you are using the Reader for PC or Reader for Mac software.
NOTE: These models are not compatible with the Reader Library software.
When you connect your Reader Digital Book to the computer, depending on your model, do the following:
PRS-T1: In the USB connected screen, make sure you tap the Data Transfer Mode icon so that your Reader goes into Data Transfer Mode.
PRS-T2: In the Do you want the computer to recognize this device screen, make sure you tap Yes so that your Reader is recognized correctly.
If the problem persists, close the software, re-open it, and then check the connection status again.
Verify that the Reader Digital Book battery has an adequate charge.
NOTE: If the battery is discharged, allow the battery to charge for at least one hour before attempting to connect the Reader Digital Book to the software.
Verify that the Reader Digital Book is turned on and is not locked.
Verify that the USB cable is properly and securely connected to the Reader Digital Book and the computer.
NOTE: The USB cable should be connected directly to the computer. Connecting the Reader Digital Book using a USB hub or extension cable is not supported.
Verify that the Reader Digital Book displays the USB connection indicator in the upper-right corner of the screen.
Remove any Memory Stick® media or SD media in the Reader Digital Book.
Disconnect any other USB Device except for your Keyboard, Mouse or Wireless USB transmitter.
With the Reader Digital Book connected to the computer, uninstall the USB driver.
After you uninstall the driver, disconnect and then reconnect the Reader Digital Book back to the computer, allow a few moments for the driver to reinstall and then check the status.
If the problem still happens, turn off your Reader digital book and do a Hard Reset.
IMPORTANT: After doing a Hard Reset, it will be necessary to authorize your unit again.
If possible, install the Reader software on a different computer and connect the Reader Digital Book to test.
The troubleshooting steps listed above should resolve your issue. If you have completed all of the steps and the issue is not resolved, service may be required.

Network controller is not recognized on Satellite A100 under Windows XP

Hi all!
I have purchased a Satellite A100 PSAAR and I have performed a clean install of Windows XP on it. I have installed all the drivers in the correct order(downloaded them from the support page) but I still have one problem:
In the device manager the ethernet controller and the network controller show up with a yellow exclamation mark and they are not recognized. I downloaded the lan driver and I got it to recognize the ethernet controller. However no matter how hard I tried, I cannot find the suitable driver for the NETWORK CONTROLLER which still shows up in the device manager in yellow color.
I could really use any help here...Thank you in advance.

Please note that Wireless Lan card is placed under the Network adapters too!!!
If you have installed the LAN (Ethernet) driver and the card was installed you should also check if a WLan card driver is needed!!!!
By the way:
If the LAN card was not recognized try this Intel Lan driver:
Intel 8256x Ethernet Controllers
http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=999&lang=eng
Good luck

I have been trying to restore my ipod touch for several weeks. It shows on the ipod the usb to itunes screen but is not recognized by the computer. I have tried 3 different laptops and a generic usb and nothing has worked. Would appreciated any advice

I have been trying to restore my ipod touch for several weeks. The ipod is on the usb-itunes screen but the computer will not recognize it. I have tried three different laptops and am now very frustrated. I have also tried several different usb connectors.

Try putting the iPod in DFU Mode vs. Recovery Mode.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
 In Memory of Steve Jobs 

Ipod froze and the USB is not recognized by the computer

I installed the program that came with the ipod and my screen froze. i try to restart it but it is still frozen. when i try to restart it, this error message pops up: USB Device Not RecognizedOne of the USB device attached to this computer has malfunctioned and windows does not recognize it.
Fifth generation ipod Windows XP

it still doesnt work, i get the same error message

Outlook 2010 or earlier versions are not recognized in PSE 9 under Windows 7 64 Bit

Hello, is there any info available "to convince" Photoshop Elements to recognize a installed Outlook 2010 and to work with Outlook 2010 in a WIN 7 64 Bit system?
In my Photoshop elements 7 and 9 versions it is not possible withinPSE 9 or PSE 7 under windows 7 64 Bit to select Outlook as a valid parameter under the otion settings within Elements to handle emails functions within PSE properly.....

Yep. I agree with the above comments. Other users have reported issues while working with outlook 64 bit. Here is one such discussion http://forums.adobe.com/message/3289324 .
Thanks

TS1382 I own Ipod classic. Recently, purchased new desktop and the device is not recognized by the computer.

Encountering problems with Windows 8 desktop recognizing Ipod

Is the latest iTunes installed on the new computer? You can get the latest version here
https://www.apple.com/itunes/

Ipod Not Recognized By The Computer

I have a third generation 20 gig ipod ,
when i turn it on , i get the apple logo ,then the image of what looks to be the other side of the usb cable with an arrow pointing to the left , i tried to restore the ipod , but windows does not recognize it , i tried many other things , i could use some help , please
Windows XP

I read a post earlier that someone said they'd done the same thing and had to go to an Apple shop to have the stuff returned to how it was .. not sure if that's the only way, but its an option perhaps if you are close to an Apple shop?

My ipod is not recognized by the computer

When I plug my nano into a computer my itunes dose not recognise that it is pluged in. The screan of the ipod gives me the charging symbol. I know it has a good over night charge and my other ipods hook up just fine

This came from another thread, but worked for me. Problem is with newest iTunes 4.62. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

"Device not recognised by the computer"

Hi,
I have an ipod 30 GB with Video. When I connect it to USB 2.0 of my computer I get a message "Windows cannot rcognise the device.
My Ipod screen shows "Do not Disconnect", the time shown on the screen is frozen. I tried charging it using an adaptor charger but my ipod screen is frozen.
I cannot scitch it on to listen to music too. It is completely frozen. Please help ???? .
Madhu

Hopefully this isn't the problem, but I got similar indications when I tried to use a 3rd party dock. I'd get the "Device not recognized by the computer" message and the iPod screen went to the "do not disconnect" display. It actually fried the USB port on my computer so that the PC detected things connecting but couldn't communicate properly.
In my case the iPod thankfully survived and once unplugged was back to normal and the rest of the PC besides that USB port was ok but nothing plugged into that port behaves now.
Used any 3rd party accessories to connect the iPod lately?
In my case after the problems I examined the dock and discovered that the pins in the connector were actually in the wrong positions (!!!), I'm lucky I only frid a $30 part.
(in case you're wondering the dock brand name was XtatiK)
Windows XP Pro

SB (model 0220) Live 5.1 NOT RECOGNIZED by the computer (under Windows

Similar Messages

Maybe you are looking for