SB X-Fi Driver Installation Problem (X-Fi does not install on Asus A8N-VM CSM
Dear forum members,
I want to install Soundblaster X-Fi Xtreme on my Windows XP x64 Professional computer, but i am not able to succesfully finish 64bit X-Fi driver installation. Whether i use newer x64bit X-Fi beta driver or older official x64bit X-Fi driver, the installation of the driver stops at the end of the installation, when "CTDVINST.DLL" file is being installed and MY COMPUTER REBOOTS instantly. After the reboot, i am being asked to install Soundblaster X-Fi driver again and again. So all the X-Fi software installs well, but when i want to upgrade to x64bit drivers downloaded from Creative web site, the installation process reboots my computer right at the end of it, when "CTDVINST.DLL" file (it seems to be the last file in the driver package) is mentioned.
Help me please solve this problem, so that i can use my new Soundblaster X-Fi Xtreme on my computer soon.
Thank you very much.
Michal D.
My computer specs: AMD Athlon 64 3200+ venice, microATX Asus A8N-VM CSM motherboard (socket 939, nForce 430), Seagate Barracuda 60GB SATA II 7200.9 hdd, LG GSA-467BRL DVD-RW, 2xGB DDR PC3200 Corsair VSGB400C3 dual channel memory, XFX gf 7600GT (PV-T73G-UDF3) graphics card, WiFi PCI card Asus Wl-38g, 420Watt power suply, Microsoft Windows XP Professional x64 Edition.Message Edited by misadlouhy on 06-2-2006 2:03 PMMessage Edited by misadlouhy on 06-3-2006 05:09 AMMessage Edited by misadlouhy on 06-3-2006 05: AM
any help would be most welcome
--------------->
- new Windows installation did not help,
- it is not caused by x64bit operating system, beacuse it did not install neither on Win XP 32bit
- i tryed both driver updates (2 and 3) on both operating systems
- i tryed to start driver installation from X-FI Driver\Drivers\Support\ctzapxx.exe, no change at all
- i tryed to uninstall previous driver first through ctzapxx.exe as well
- i tryed to install the driver on fresh installation of both Windows XP x64bit and x32bit
driver installation reboots the computer just a percent before it should finish, allways, no matter how i try to install the driver
i have heard about Creative sending to some owners of nForce430 motherboards new version of Sb X-Fi, which works with nForce430, is it true?Message Edited by misadlouhy on 06-3-2006 05:23 AMMessage Edited by misadlouhy on 06-3-2006 05:24 AM
Similar Messages
-
My iTunes installation via Windows 7 does not install the Apple Mobile Device Support file
I have followed several suggestions to resolve the problem caused because of my update of iTunes does not install the Apple Mobile Device Support folder, thus making it impossible for me to sync my iPhone 4S to my desktop version of iTunes. I have tried to install the AppleMobileDeviceSupport.msi file and it almost completes the installation before "rolling back" the entire process and giving me a message that there was a problem with the installation. Has anyone been able to solve this problem. I use Windows 7. I have seem some :"solutions" that seem to work for some people, but not for me, and evidently not for many others? Finally, would it matter if I installed Safari on my desktop and tried to install iTunes using Safari?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Solution for PS CS3 installation problem on Vista does not work.
I encountered the much discussed 2739 error when trying to install PS CS3 on Vista Ultimate. I followed the proposed solution. But instead of a dialog box I received the message: not recognized. I have the latest update of Java installed and I have IE as my default browser.
What now? Return CS3?I did and got a friendly guy who apparently had never heard of the 2739 error. I was hoping to get some support here. In another thread I read something about holding the installation window until installation starts. I can try it, but I doubt I am quick enough before the error window opens.
-
Installation problem, SQL developer does not start
Hi,
I have tried to install both version of SQL Developer, with and without JRE.
But when I click the sqldeveloper.exe file nothing happens. Nothing at all!
Do any of you have any tips or ideas what the problem could be?
I have the latest java jdk installed and jre.
regards
BaranWhat output do you get when if you run from the command line?
-
Dreamweaver cs 5.5 problem with app. does not install in the emulator android
i have a problem when run in a emulator
check the img.
note: the img is the version spanish.
what is the problem?Thanks Steve
I trashed the two preference files as instructed.
Expoerted the file to IDML.
Opened the IDML file and saved it as an ID file.
The problem still exist.
RGDs
Tamir -
My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music. I didn't have problems loading music originally, but this is a new occurrence. Could you help?
Hey, Thanks a lot. It took quite a bit of time to resurrect this ipod. I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new. This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted. Finally, it recognized my ipod and started to download each song. It took awhile as there was 602 songs, but finally it works. Yea!!! I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information. This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone. Take care, Karen
-
Can you upload Logic pro onto an external drive? Because my G5 does not have 50 GB available for installation, Can you upload Logic pro onto an external drive? Because my G5 does not have 50 GB available for installation
Logic 9.0.2 is the last version that runs on a G5 - 9.1.x is Intel only.
If you have only 50 GB left on your system drive, you should consider it full. Get an external drive and move your music, movies and photo's to it, and delete them from your system drive to free up space.
The free space on the system drive is being used by the OS to offload RAM, rule of thumb is to keep at least 20 % of the drives' capacity free. When you have less and less free space, your Mac will eventually become very slow (many "beachballs").
I believe the current Logic Package has version 9.1 on it, be sure you have the correct (9.0) version... -
GT70 Dragon 2 GTX780M driver (311.83) posted on MSI not Installing correctly
The New video card driver posted on the website: http://www.msi.com/product/nb/GT70-Dragon-Edition-2.html#download, does not seem to install correctly. on My new GT70 Dragon 2 with the GTX780m. I'm assuming this is an updated driver for the GTX, but when installed and after a boot, it is in an error state in the device manger. I have tried to install it several times, but it never gets installed correctly. I was really hoping for an more recent version of the driver, but I have to keep going back to the 311.48
Nvidia N14X Series Graphic Card
type
VGA
os
Win8 64
language
English
update
2013-07-16
version
311.83
size
295.2 MB
file
vga_nvidia_n14x_n15x series 9.18.13.1183_8764.zipQuote from: Sirfuji on 21-July-13, 03:04:52
This is a completely different matter, the driver I mention is different and I m not stuck on the driver. it installs but is not loading correctly in the device manager. This is an official driver from MSI, that does not install correctly, not looking to modify here. Just wondering if other users have had a problem loading this driver.
Please stop worrying about my posts and go about your business, you having nothing useful to offer on this thread.
Hi I saw this on fofum in here somewhere. Try to completely uninstall nvidia drivers and intel VGA drivers too. Then delete nvidia folden on system drive. Run ccleaner for system crap and also registry. reboot. Then install Intel driver and nvidia DRV. It worked for the guy having similar problem. -
ODI 11g 11.1.1.7 with Win64 bit OS : Strange problem : Right click does not work for Create new data server in Topology.
On right click nothing happens at all. I have reinstall the ODI multiple times with right installer. issue persist.
Please help.Hi,
Did you use the generic installer or the win32 one ? You should use the former with Win64.
You can also check that your version of Java is supported in the certification matrix.
Regards,
JeromeFr -
Satellte C870 (PSC8EE) - Display driver for Win8 does not install anything
Hi,
I have a Satellite C870 bought in october last year.
I upgrade it from Windows 7 to Windows 8 a first time just before Christmas and worked fine.
(Some small issues suchas Bios upgrade needed before installing the display driver but all worked well)
Few days ago I had a system crash and the HDD died.
Send out the Sateite for HDD replacement and got it back with Windows 7
Started last evening installation back to window 8 64.
But the display driver from Toshiba site does not install anything ? Not even catalyst....
Just get the request to confirm if I want to install the product and then nothing...
Tried both drivers proposed from 19/02 and 26/02 but with the same result....
Tried to install the driver directly from AMD ad got a message my card was not supported
Tried Windows 7 driver from Toshiba site for my machine and got the same message....
Graphic card is an AMD 75610M
And of course I have admin access, and also tried to launch the Setup files in admin mode.
And other drivers install normally (Lan Drivers, Wifi Drivers, Tempro, Eco mode etc)
Thanks for your HelpThanks for your kind answer ....
I had unfortunatly tried this option already before posting...
Should have been more explicit in my post....
*I have a solution working right now as I finally achieved to install Drive 13.1 from AMD site.*
Even though I had to proceed with a manual installation.
Sill consider a pitty the file from Toshiba is not working. -
Oracle Installer:[INS-13001] Environment does not meet minimum requirements
Hi,
I am trying to install the latest Oracle Database software on the latest Oracle Enterprise Linux and the installer returns "Environment does not meet minimum requirements".
Oracle Enterprise Linux 6.3 x86-32
Oracle Database 11.2.0.3 x86-32
cd /stage/Oracle_Database_11.2.0.3_Linux/x86_32/database
./runInstaller
1. Configure Security Updates <next>
2. Download Software Updates <next>
Get the warning screen with the error,
Oracle 11g Database Release 2 Installer:
[INS-13001] Environment does not meet minimum requirements.
Are you sure you want to continue ?
I looked the log file but it didn't tell much.
cd /tmp/OraInstall2012-12-15_04-26-04PM
tail installActions2012-12-15_04-26-04PM.log
INFO: Verifying target environment...
INFO: Checking whether the IP address of the localhost could be determined...
SEVERE: CVU do not support target environment..
Refer associated stacktrace #oracle.install.ivw.common.validator.SupportedOSValidator:371
INFO: Completed verification of target environment.
WARNING: Verification of target environment returned with errors.
WARNING: [WARNING] [INS-13001] Environment does not meet minimum requirements.
CAUSE: Minimum requirements were not met for this environment
ACTION: Either check the logs for more information or check the supported configurations for this product..
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:374
INFO: Advice is WITHDRAW
WARNING: Advised to shutdown the installer due to target environment verification errors.
INFO: Adding ExitStatus PREREQ_FAILURE to the exit status set
INFO: Finding the most appropriate exit status for the current application
INFO: Exit Status is -3
INFO: Shutdown Oracle Database 11g Release 2 Installer
Have you seen this before?
Thanks,
Marcelo Marques
Technical Manager, EsriHi,
A follow up on my comments from the previous message.
"The DNS server failed to resolve the nslookup using host.domain."
[marcelo]: I don't think this is a major problem, I have installed on the same hardware OEL5 and Oracle 11.2.0.1 without problems.
$ nslookup student03
Server: 8.8.8.8
Address: 8.8.8.8#53
** server can't find student03: NXDOMAIN
"You have incorrect versions of binutils, compat_libcap1, compat-libstdc++-33, gcc, gcc-c++, glibc, glibc-devel, ksh, libaio, libaio-devel, libgcc, libstdc++, libstdc++-devel, make, or sysstat installed on your system. Make sure that the correct versions are installed. For the required versions, see Knowledge Article 169706.1."
[marcelo]: I have reinstalled the rmps but still get the same problem.
[root@student03 Packages_x86_32]# rpm -Uvh binutils-2*
Preparing... ########################################### [100%]
package binutils-2.20.51.0.2-5.34.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh compat-libcap1*
Preparing... ########################################### [100%]
package compat-libcap1-1.10-1.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh compat-libstdc++*
Preparing... ########################################### [100%]
package compat-libstdc++-33-3.2.3-69.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh gcc-4*[root@student03 Packages_x86_32]# rpm -Uvh glibc-2*
Preparing... ########################################### [100%]
package glibc-2.12-1.80.el6.i686 is already installed
Preparing... ########################################### [100%]
package gcc-4.4.6-4.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh gcc-c++-4*
Preparing... ########################################### [100%]
package gcc-c++-4.4.6-4.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh glibc-2*
Preparing... ########################################### [100%]
package glibc-2.12-1.80.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh glibc-devel*
Preparing... ########################################### [100%]
package glibc-devel-2.12-1.80.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh ksh*
Preparing... ########################################### [100%]
package ksh-20100621-16.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh libaio*
Preparing... ########################################### [100%]
package libaio-0.3.107-10.el6.i686 is already installed
package libaio-devel-0.3.107-10.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh libaio-devel*
Preparing... ########################################### [100%]
package libaio-devel-0.3.107-10.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh libgcc*
Preparing... ########################################### [100%]
package libgcc-4.4.6-4.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh libstdc++*
Preparing... ########################################### [100%]
package libstdc++-4.4.6-4.el6.i686 is already installed
package libstdc++-devel-4.4.6-4.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh libstdc++-devel*
Preparing... ########################################### [100%]
package libstdc++-devel-4.4.6-4.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh make*
Preparing... ########################################### [100%]
package make-1:3.81-20.el6.i686 is already installed
[root@student03 Packages_x86_32]# rpm -Uvh sysstat*
Preparing... ########################################### [100%]
package sysstat-9.0.4-20.el6.i686 is already installed
Thanks,
Marcelo -
IIMac doing upgrade of Elements 10 to Elementys 12. Did full backup of 10 on my external hard drive "MY Passport". Rec'd message backup successful. Did restore on 12 and rec'd message "The disk in drive My Passport for Mac does not contain a valid backup". Any help suggestions?
The funniest part of the whole situation, Apple Care explained it to me as some kind of feature. The told me how to adjust the time when my computer sleeps and recommend I don't shut it down, let it sleep and "instant wake". I would bet if you called them about your Macbook, they would suggest you just close the lid and let it sleep rather than shutting it down.
Basically shutdown and restart have a problem and the solution is to not shutdown is how they explained it to me. They kept saying buzz words like "instant on" and "fast wakeup". My computer already could sleep and wakeup fast, but now shutdown and restart don't work right. I called them 3 times about it, but since they use these buzzwords, sounds like Lion is meant for a Macbook Air or a Mac with an SSD. If you have a normal hard disk, some of the saving/versions/resume features take too long to be written to the disk on shutdown. And when you start again, it takes a long time to reload the system to it's previous point.
Even if I uncheck the box to reopen windows on next start, it reopens them anyways.
If they can't give me a better explaination or some kind of fix, I will have to go back to Snow Leopard. I use my Mac in a production environment and depend on stability. They assured me before I upgraded that it would be stable and all the new saving and versions features could help my productivity. So far it's not helping me and downright annoying. You need to close all your windows before you close the program... if you have 5 windows open in terminal or textedit... every time you launch, they will launch all those windows. I just really want versions, not resume it seems.
But I can deal with it opening a million windows, just can't take it getting stuck on booting or not shutting down properly. This is a "feature" that should be fixed. LOL -
Help! When i connect my "iomega" External hard drive to my mac it does not show in devices or on the desktop, how can i access my hard drive?
what format your iomega HD is it NTFS , if NTFS try download http://www.apple.com/downloads/macosx/system_disk_utilities/ntfs3g.html
-
My Windows 7 Ultimate {32bit} does not install driver for my LG HDD HXD5 320GB
My windows 7 does not install driver for my LG EXTERNAL HDD HXD5 320GB & its attached using a USB.
It works perfectly on Other computers having Windows 7 & Windows XP & Windows Vista, just doesn't work on mines.
I have had internet connected when it was installing hence it got the opportunity to search Windows Update for it but it fails :(
It works even on my computer ( I have DUAL OS) on windows XP SP3 but i need it to work in Windows 7.
Please help Thanks :)
& i have already tried tried the solution which was proposed for another topic in this forum on which it was to Uninstall the driver using Device Manager and unplug the HDD and attach again and let the computer detect and install it again, my computer
does detect it but fails to install the drivers.
My Computer has a 2GB of RAM & 2.40GHZ (32bit) with an Intel Core 2 Duo Processor and had come with Windows Vista Home Premium 32bit installed, & i upgraded to Windows 7 Ultimate 32 Bit which is completely updated to all the Updates that Microsoft
had offered (using the built in Windows Update in Control Panel)
I have got screen shots of it too.
http://shumayal.fileave.com/HDD.zip
PS: Same is the case with some of my USB Flash drives, but in their case they don't get detected at all but get in Windows XP SP3 (which is another OS on my pc) as well as on windows 7 and other OS on OTHER COMPUTERS but not mines in Windows 7.
Thanks :)Hi,
I recommend you try to update the BIOS and the motherboard chipset drivers for Windows 7 firstly.
After that, please refresh the USB Stack:
Control Panel – Device Manager – USB Serial Controllers – Right Click on EVERYTHING and UNINSTALL all except the category itself – Reboot
. This refreshes the drive and the USB stack
Then, right click on the LG EXTERNAL HDD HXD 5 320GB in Device Manager and select Update Driver Software.
You may also try the Windows 7 built-in
Hardware and Devices troubleshooter.
Hope it can help you!
Best Regards,
Miya Yao
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial
to other community members reading the thread. -
When I download Photoshop CC I get everytime a message "Completed installation, some optional components are not installed correctly. (6)"
What can i do?
I have Windows 8 and i7 with gtx760
Please help mePlease send me the installer logs to [email protected] from C:\Program Files (x86)\Common Files\Adobe\Installers
The file name would be like: Adobe Photoshhop cc 2014 15.0 <Date>.log
-Pragya
Maybe you are looking for
-
After Effects CC 2014 quits on launch; GPU Manager Error
Hi, I have the same problem with an iMac i7, 32GB ram, GForce GTS MX680 2Go, with all the updates (OS, Adobe, video card driver CUDA ...) I have the same error message when I quit After. This 2014 release from the CC. Users have many problems with th
-
and after that i see firefox prevented this site ( any site i open ) from asking you to install software on your computer .. can i make allow to the install or that kind of the Hack thanks for all of you
-
hi is it mandatory to create one time account group for one time customer like in the the case of CASH sale, can't i create CASH customer in my normal customer acccount group where i maintain my Reconcllation account accordingly. so for every transc
-
How to Custom Infotype in PA30 ( in Employee Information tab)
Can any one tell me .. how to add my custom infotype in PA30 (Employee Information tab) I don't how to add.... Tell me the procedure (Steps) to add in V_T588B. Regards Surendar T
-
How do I sync my Calendar and Contacts with my Mac ?
How do I sync my Calendar and Contacts between my iPhone4 and my Mac ? It did until January. Now in iTunes the check box for syncing them is not present anymore. Instead I see the text "Your contacts are being synced over the air" (which doesn't hap