SB X-Fi Extreme new driver not working
Win 7 64 bit , Dell XPS 730. The atoprogram installed new drivers( A very large file) and now th esoundsystem does not work? a lot of noise and low level. Anyone any suggestins? Thanks Curt
Ofcourse that was something I did not know before I bought the soundcard. I am quite sure it is an AC 97 Front Panel, but how can I verify that?
Seems like I will have to sell this soundcard.
- The plugs from my 5.1 sound system are quality plugs and are rather big and so they barely fit, because the audio jacks (not sure about the correct english term here, i mean the holes from the soundcard, where you plugin the soundsystem) are sitting way too close together (expected more for that price..).
- It doesn't support my Case's Front Panel.
- And the soundcard is sitting directly before my Graphic Card's fan (because it uses PCI-E), causing heat.
I guess there is no way around it. I will probably get a new graphic card at christmas and it's most likely going to be bigger than my ATI 4850HD. And I simply do not have the space for a bigger graphic card AND a soundcard, that uses PCI-E. So I guess the best solution is to sell it and buy a soundcard that uses normal PCI and supports AC 97, right? Or what would you recommend?
Until then, is there an easy and cheap way to upgrade my ac97 front panel to Intel HD Front Panel Audio?
thanks
Similar Messages
-
Ok, I play FFXI, and a new patch came out, requiring me to dl the latest Drivers.
I download them and install them and they work fine. But when i try to get into the game i get a windows Error(Where the screen is all blue, press esc to cancle and enter to continue). This does just happen with FFXI, it happes with coutner Strike, or any game that require Direct 3D. I dont know why these errors come up. But id like to fix it, or ive lost about 7 months of progress on my game.
So i dont know If its my video card thats not working, or just my computer.
This error doesnt come up when i use the driver, supplied with the video card.Even then if i try running FFXI, it creates an Illegal Operation. I cant run the agme w/o the new drivers. OR maybe its not that, because before it said it wasnt Intalizing my Direct 3D.
Now my Direct 3D test are working, but when i goto dxdiag, it says my video card.
MSI MSI-StarForce GeForce FX 5200. This name also changes when i download the new driver.
And below the name it says, Chipset : n/a, Dac Type: n/a
Would be nice if i could fix this problem, thnx.So far all we know is which video card you have, That's it.
You did not state what type of mother board/cpu is involved, what OS, amount of RAM, or even the driver version you had been using and the version updated to.
Impossible to venture a guess at this stage. Please tell more about this issue. -
The wireless connection to the printer is either extremely slow or not working at all on OS X Yosemite. It shows up in the list of printers in Bonjour in Safari, and I can connect to parts of the web interface if I wait a very long time. However, I cannot add the printer as a new printer in System Preferences even though the printer shows up.
I have upgraded to the latest firmware. The WiFi indicator on the printer is on, "green", and it has a reserved IP showing up in my router (ComCast). It seems that Windows machines can printer to the printer wirelessly without a problem.
Any help appreciated.
Stephen
This question was solved.
View Solution.Hello @sscotti,
I would like to assist you today with installing your wireless HP LaserJet Pro CM1415fnw Color Multifunction Printer on your Mac OS X 10.10 Computer. Now you indicate in your post that this printer works fine with Windows computers, and you are able to 'see' the Bonjour printer on your Mac. Therefore, the issue that you are experiencing is not network related. Rather, I do believe that you are experiencing a driver conflict on your Mac OS X 10.10 computer. Can I please have you run the steps below to resolve this issue.
Step 1: Uninstall Drivers and Software:
First, I'm going to have you 'clean up' your Mac OS X 10.10 computer to verify that any trace of your Laserjet printer is gone so we have a nice clean slate to work with. Please click here and when the website opens select the drop down for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for Mac OS X 10.10. Run the appropriate uninstall steps for the method in which you originally tried to install your printer: Apple Updates, or the HP Driver download.
Once the uninstall is complete, please proceed to the next step.
Step 2: Verify and Repair your Disk Permissions on the Mac:
Open Macintosh HD and go to Applications
Go to the Utilities Folder
Open the Disk Utility
Select the Hard Drive volume you are using (usually on the left)
Select Verify Disk Permissions
Once that process is done, select Repair Disk Permissions
Step 3: Check for Apple Updates:
Go to Apple
Select System Preferences
Select Software Update
Click Update Now
Install your available updates
Restart your computer
Step 4: Reinstall your Software and Drivers:
Please click here to download the appropriate Mac OS X 10.10 drivers for your HP Laserjet printer.
Once the website opens select the 'download' button on the top left
Once the download has completed, please follow the onscreen steps to reinstall your printer.
Once the reinstall is complete, test the print and scan functions to ensure that your printer is functioning as per normal.
Please respond to this post with the result of your troubleshooting. Should you still be experiencing issues there are additional steps I can have you run through. I look forward to hearing from you. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
Audio driver not working in hp 2000 - 2116tu laptop
Audio driver not working in hp 2000 - 2116tu laptop
Driver installed : sp57716.exe
From : http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-106718-1&cc=us&dlc=en&lc=en...
OS : Windows 7 Pro x64
Exact Problem : Audio stops working now, and then, intially reinstalling audio driver helped, but now, that trick is also not working!! I'm nither on mute, nor on low volume level!!
Laptop is brand new : And i'm using it from last 2 days only, so was installing everything for the first time.Hi architsomani,
Take a look at this document and let me know if the troubleshooting steps help to resolve your issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
iTunes download is extremely slow or not working, am I the only one experiencing this, iTunes download is extremely slow or not working, am I the only one experiencing this?
I do not have a solution, just the same complaint. ***! ! I just used the iTunes store 2 weeks ago and now, after reviewing everything they asked for including ID/Pass/ Account Info etc. I can't even get into the store. I have tried asking at the Mac store and it has all been to no avail. I was perfectly happy with iTunes before all of this ********... seriously what is the issue with iTunes? They ask me to upload a new version (with no system specs anywhere that I can find on the page) and then say it can't utilized because of system inadequacy. It is exceedingly frustrating.
-
i have hp pavilion dv4 series.my dvd drive not worked properly.for that purpose only i went 7 times in your service centre but they won't take action till now .why u people do like this .i want explation and just change my dvd drive that's all.
tcrite,
Sounds like a bad drive...I would get a replacement. According to Accelerate Your Mac database, it should work without issue.
Just enter the model number of the drive and select your Powerbook G3 2000, and you will see four reports on this model.
http://forums.xlr8yourmac.com/drivedb/search.drivedb.lasso -
Amber update but map and bere drive not work
After amber update my here map and here drive not work just open the app but not open and close automatically
Same thing here. I have tried all things and have a similar issue
http://discussions.nokia.com/t5/HERE-Location-based-services/Settings-gt-Applications-does-not-have-...
NOKIA NEED HELP HERE !! -
MY FIREFOX NEW TAB NOT WORKING NIETHER WITH + NOR WITH RIGHT CLICKING ON TAB OR DOUBLE CLICKING ON TAB
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem. -
MacBook Pro Late 2011 : Optical Disk Drive not working?
MacBook Pro Late 2011 : Optical Disk Drive not working?
When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
I have resetted SMC and PRAM; no chages.
Don't know what to do. Please help.
Thank you.Clean the heads.
check to see if it is under warranty.
buy external DVD/CD rw -
HP deskjet D2300 series driver not working in windows 7
This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
My problem remains unsolved.Hi dvh,
Welcome to the HP Forums!
I see that your HP Deskjet D2300 series driver not working in windows 7.
Do you see any error messages with the installer? Or does it just close out and doesn't install?
In the meantime, please try using our HP Printer Install Wizard for Windows.
Hope to hear back from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Disk Drive not working and could not inter Hkey_Local_Machine
I tried following the directions from http://h30434.www3.hp.com/t5/Hardware/HP-Pavilion-dv6000-Windows-XP-Disc-Drive-not-working-Internet/... but when i go in to Hkey_Local_Machine all that is there is a file named "(Default)" and i cannot work with it. how can i get my disk drive running?
I tried following the directions from http://h30434.www3.hp.com/t5/Hardware/HP-Pavilion-dv6000-Windows-XP-Disc-Drive-not-working-Internet/... but when i go in to Hkey_Local_Machine all that is there is a file named "(Default)" and i cannot work with it. how can i get my disk drive running?
-
Probook g1 450 4th generation Intel Graphics Driver Not working
After Updating Baios my laptop , graphics driver not working . install successfully but when click the graphics driver icon , it's show the massage ,GfxUiEx has stopped working .
i am worried about it . what can i do ??
i uninastalled driver then again install but this massage show again ,,,i use windows 8.1.
massage is :@Ariful11
Thank you for using HP support forum. I have sent you a private message. If you’re unsure how to check your private messages please click here.
Thank you,
Omar
I Work for HP -
Icloud drive not working on ipad 3
iCloud drive not working on iPad 3. works fine on my MacBook Pro and iPhone 6. Utterly useless on iPad 3.
Hi there Chris Howlett,
Depending on the issues you are experiencing, you may find the articles below helpful.
Get help using iCloud Drive
iCloud Drive FAQ
-Griff W. -
Window 10 upgrade. Graphics driver not working even after re-install
Notebook pavilion DV6 3280. Just upgraded to Windows 10 and AMD graphics driver not working even after re-install. What do I do? Is there another driver not on the HP Website that I should try?
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
Yoga 13: the Realtek RTL8723A new driver not yet working properly
After having faced lots of stability issues with my bluetooth mouse (Microsoft Sculpt Touch) I installed the new driver for the wifi/bluetooth chip RTL8723A (v1.04.0213 - 6th June 2013) and after having used it for several weeks, I have noted the following:
Bluetooth issue:
- Still several disconnection of my mouse (but slighty less than before)
- There is a general trend that my mouse connection is worser everyday (used to work better) - and not a problem of batteries
Wifi issue:
- If I activate the "plane mode" from windows 8 wifi bar, it's impossible to reactivate the wifi! I have to run the windows'internal utility to sort out the problem (right clic on the wifi bar from the desktop and "resolve problems")
- Sometime the wifi just doesn't connect properly (its connected on the router but there is no network) and I have to turn on the plane mode and do what I wrote above to make the wifi work again. But some time it doesn't work and I have to reboot
- Despite the "wifi hotspot mode" is implemented (the "netsh wlan start hostednetwork" command) and work it's so instable that it always end in crashing the computer and followed by a reboot (perfectly managed by Windows 8 at least). Anyway I managed to cope with that during my holidays (I used it to create another wifi network which was a network share of another wifi network to which I could only log in for one device (my Yoga 13) - so I used my "hostednetwork" to connect iDevices at the same time). But after several crashes and reboot, the wifi was so instable that I had to reinstal the driver
I have never faced so much bugs in a so basic but vital component of a laptop which is the network card. This card is already far beyond what we could expect of a laptop of this range (the wifi n is single band, no 300 nor 450 mbits speed! It's worse than any modern smartphone!) and has not a good sensitivity but in top the driver seems to have been written by beginners.
So Lenovo, please, do something and pressurise your provider (Realtek) so as they release a driver working correctly - or just don't use their cards and invest in better providers (like Intel which is doing great network cards with professional class software).Sorry to hear about all your wifi issues. Unfortunately a lot of Yoga 13 owners are having problems, especially due to Realtek compatibility with specific router hardware. Just to see if things improve you might try some of the other driver versions discussed here:
The "Beta" wifi driver from diecast17 is a little older than the official June 6th driver but first improved wireless for many users: http://forum.notebookreview.com/ideapad-essential/640537-ideapad-yoga-109.html#post9180970
There is a slightly newer Bluetooth driver for another Lenovo product that also works for the Yoga 13 (per this forum thread, installs version 05/22/2013-1.3.744.3 vs. 09/06/2012-1.3.644.3): http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS034706
Maybe you are looking for
-
Time to upgrade: Long time Apple user, get the Iphone 4 or Droid 3???
Hello, It's time to upgrade to a new phone for both me and the wife, she needs a new phone now as her LG env3 is acting up. I'm a looong time Apple user, and of course the Apple iphone is a natural to pick, however It'll cost $350 for 2 when we use
-
How do I change to Student Account with Adobe Muse Single App Membership?
Hello, I have an Adobe Muse Single App Membership running, but now I want to change my account to a student account. How do I have to proceed?
-
Writing feeling on Helix comparing to x201t?
I currently owning a x201t tablet which has wacom pen and the writing is pretty good. Considerring swapping for a Helix, but from my knowledge, the Helix comes with gorilla glass, I am abit worried that the writting could feel slippery as it's writin
-
Maint order should get TECO automatically after final Confirmation
Hi Gurus, My customer requirement is that, Maint order should get TECO automatically after final Confirmation (in IW41) of last operation. Is it possible? If yes, plz let me know the steps which I need to do. Thanks in Advanceu2026 Amol.
-
How create either InputStream or InputSource from Document?
I have an org.w3c.dom.Document object that was altered in a method. Now I want to pass it to another method that can only take an InputSource or InputStream. Does anyone know how I can do this?