SB0090 Windows XP Pro X64 ed. driv

Hi all,
I have tried just about every driver I can find and none of them seem to work for my Audigy Sb0090 card on my Windows xp pro x64 machine.
If I run the one thats under Audigy > Soundblaster? on creatives website, it doesn't recognize that I have a sb0090. It just shows it as a A00 or something like that. I do however have sound to my speakers after installing the driver, but I do not have any sound to the front bay and my computer says that there is no driver to be installed for my "high definition audio buss".
Is there any driver available for the x64 bit version of windows? or maybe my problem isn't the driver?
Any help would be appriceated.
System specs:
Windows xp Pro x64 ed.
AMD athalon 64 x2 3.0gHz?
2gigs ram
80gig hd
Asus mobo..
Sapphire HD5600 gfx card?

Install the Vista drivers.
EAX and such will work maybe. On XP32 Vista drivers are fine (the new beta XP is better), with EAX/Directsound working. It should work in XP64 the same.
Message Edited by fffcmad on 03-06-2008 0:48 PM

Similar Messages

Can't install Windows 7 Pro x64 - device driver missing - can't eject DVD

Hello,
I am trying to install Windows 7 Pro x64 - I create the partition in boot camp and start windows install process. **During the Windows install process**, it says "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: if the Windows installation media is in the CD/DVD drive, you can safely remove it for this step".
Apparently the drivers are on the OSX install DVD. But, there is no way to eject the windows DVD! Why on earth is there no manual eject on Macs? Is there another way to eject? I tried to put a paperclick in the slot next to where a CD is inserted but it didn't do anything. Is there another way to get Windows to see the correct device drivers?
I am all for clean slick designs, but when it does not have all required functionality, it is kind of useless.
I am talking to Mac Support and they can't help.
Looks like I will have to return this Mac, I also need to boot into full Windows (without Parallels or VMWare) to do my work.
dan
Message was edited by: dbperson

You don't mention what Mac you have, so I'd have to say there is almost no way to help.
IF the 7 Pro x64 came download ISO thru EDU, you have to burn it, and if you use Disk Utility, at 2X reduced burn speed... otherwise it won't work.
A VM isn't fussy and can use ISOs.
If you want both native and VM, to have Windows installed on its own hard drive and use it under OS X, then you have to install it and use Boot Camp Assistant.
I'd say it is all about your DVD media.

Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request

Hello Microsoft Community,
I'm trying to install the following:
Product ID: Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card
Name: ORiNOCO Wireless PCI Network Card
Device ID: PCI\VEN_168C&DEV_0013&SUBSYS_0A1014B7, PCI\VEN_168C&DEV_0013&SUBSYS_0A6014B7.
Problem: None of the drivers for Windows 7 X64 has worked to install in devmgmt.msc Please advise where Windows 7 Drivers can be downloaded.
[Please note I've tried the following and had no success: 4.2_JP2_Vista , 4.2_Vista , 4.2_whql , ORiNOCO_v31219 , V2.2.0 software , wpn311_2_0_setup]
I have submitted the following to Proxim Tech Support :
Support Request Submitted: 20284
Thank you! Your support request has been submitted and one of our technical support members will be in touch shortly.
Details
Subject
Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request
Status
New
Severity
Medium
Type
Support Request
Reason
Driver / Software Installation
Request Date
Jan 12, 2015 05:31:26 am PST
Product
Serial Number
Warranty / ServPak
N/A
ServPak Reference
Description
Hello Proxim Tech Support, Product ID: Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Name: ORiNOCO Wireless PCI Network Card Device ID: PCI\VEN_168C&DEV_0013&SUBSYS_0A1014B7, PCI\VEN_168C&DEV_0013&SUBSYS_0A6014B7. Problem:
None of the drivers for Windows 7 X64 has worked to install in devmgmt.msc Please advise where Windows 7 Drivers can be downloaded. Thanks, Kent C.
Proxim ORiNOCO 8482 11a/b/g Wirelss PCI Card Windows 7 Pro x64 Driver Request
Status
New
Severity
Medium
Type
Support Request
Reason
Driver / Software Installation
Request Date
Jan 12, 2015 05:31:26 am PST
Product
Serial Number
Warranty / ServPak
N/A
I will update thread with their reply as nothing, even Driver Genius Professional 11 has located the actual working driver. Once an update is verified, I will post back to this thread since I couldn't find the right answer online.
THIS BTW I TESTED IS INCORRECT [You may verify if you don't believe such] :
http://www.experts-exchange.com/Software/System_Utilities/Q_26292317.html <- That didn't work [Found driver online via Google] and link isn't working anymore in that post.
This is related to this thread here:
https://social.technet.microsoft.com/Forums/windows/en-US/668ac1f0-4560-4bd3-8848-c4fcdc70c10a/wanted-atheros-driver-for-windows-7-x64?forum=w7itprohardware
Any assistance would be appreciated! Thanks..
Kent C.

Hi,
About this issue, you need conatct proxim support to confirm if it could works fine in WIndows 7 platform and how to get the proper driver package.
Karen Hu
TechNet Community Support

Oracle XE 11g x64 does not run. No *DBF files inside of the XE folder. Windows 7 Pro x64.

Hello everyone!
I hope you are doing well all. In my case I have some troubles by installing Oracle XE 11g on my PC. My OS is Windows 7 Pro x64.
1. I activated the Administrator mode on my PC (net user Administrator /active:yes)
2. Started the setup as Administrator. The setup process was finished successfully with no errors showed.
3. Started the Database, OracleServiceXE, OracleXETNListener and other services.
4. Tried to connect using sqlplus-> connect system ->password, what in result gave me ORA-01034 Oracle not available and ORA-27101 Shared memory realm does not exist errors.
5. Then I recognized that my C:\oraclexe\app\oracle\oradata\XE folder is empty when it should be usually full with 6 DBF file.
6. I opened the cloneDBCreation.log and it contains these data:
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> exec dbms_backup_restore.zerodbid(0);
SP2-0640: Not connected
SP2-0641: "EXECUTE" requires connection to server
SQL> shutdown immediate;
ORA-12560: TNS:protocol adapter error
SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\initXETemp.ora";
ORA-12560: TNS:protocol adapter error
SQL> Create controlfile reuse set database "XE"
2 MAXINSTANCES 8
3 MAXLOGHISTORY 1
4 MAXLOGFILES 16
5 MAXLOGMEMBERS 3
6 MAXDATAFILES 100
7 Datafile
8 'C:\oraclexe\app\oracle\oradata\XE\system.dbf',
9 'C:\oraclexe\app\oracle\oradata\XE\undotbs1.dbf',
10 'C:\oraclexe\app\oracle\oradata\XE\sysaux.dbf',
11 'C:\oraclexe\app\oracle\oradata\XE\users.dbf'
12 LOGFILE
13 GROUP 1 SIZE 51200K,
14 GROUP 2 SIZE 51200K,
15 RESETLOGS;
SP2-0640: Not connected
SQL> alter system enable restricted session;
SP2-0640: Not connected
SQL> alter database "XE" open resetlogs;
SP2-0640: Not connected
SQL> alter database rename global_name to "XE";
SP2-0640: Not connected
SQL> alter system switch logfile;
SP2-0640: Not connected
SQL> alter system checkpoint;
SP2-0640: Not connected
SQL> alter database drop logfile group 3;
SP2-0640: Not connected
SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\app\oracle\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED;
SP2-0640: Not connected
SQL> select tablespace_name from dba_tablespaces where tablespace_name='USERS';
SP2-0640: Not connected
SQL> select sid, program, serial#, username from v$session;
SP2-0640: Not connected
SQL> alter user sys identified by "&&sysPassword";
SP2-0640: Not connected
SQL> alter user system identified by "&&systemPassword";
SP2-0640: Not connected
SQL> alter system disable restricted session;
SP2-0640: Not connected
SQL> @C:\oraclexe\app\oracle\product\11.2.0\server\config\scripts\postScripts.sql
SQL> connect "SYS"/"&&sysPassword" as SYSDBA
ERROR:
ORA-12560: TNS:protocol adapter error
SQL> set echo on
SQL> spool C:\oraclexe\app\oracle\product\11.2.0\server\config\log\postScripts.log
I spent around 2 days to come to this reason and now I do not know what to do next.
My actions to resolve this problem:
1. Checked if my user has administrative rights and belongs to ora_dba. It does!
2. Turned Microsoft UAC off.
3. Set the system and local variables of ORACLE_BASE, ORACLE_HOME, ORACLE_SID, PATH, TNS-ADMIN to the appropriate values in Enivornment Variables:
     - ORACLE_BASE -> C:\oraclexe
     - ORACLE_HOME -> %ORACLE_BASE%\app\oracle\product\11.2.0\server
     - ORACLE_SID -> XE
     - Added to PATH -> C:\oraclexe\app\oracle\product\11.2.0\server\bin;
     - TNS_ADMIN -> %ORACLE_HOME%\network\admin
4. Removed Oracle XE 11g and reinstalled to another drive. No sense!
Some more errors:
1. C:\oraclexe\app\oracle\product\11.2.0\server\config\log\XE.bat.log
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Ein Mitglied konnte in der lokalen Gruppe nicht hinzugefugt oder entfernt werden, da das Mitglied nicht vorhanden ist.
It means -> O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
I understand that I need to logon as batch job. I added me to this policy in User Rights Assignments, but still I get these "DIM-00019: create service error" and "O/S-Error: (OS 1387)". And I guess just therefore my database is not starting well.
2. 127.0.0.1:8080/apex/f?p=4950 is not starting in browser. It is probably because the database is not running appropriately. For this issue have already seen one topic in Google that the HTTP Properties inside the Listener Status must be set to 8080 to make this link work. But in my case I do not see this line in my Listener Status:
Some other information relevant to the issue:
1) echo %USERNAME% - Administrator
     echo %USERDOMAIN% - ildar-PC
2) Listener.log:
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
3) Tnsnames.log
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = ildar-PC)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)
4) Sqlnet.log:
SQLNET.AUTHENTICATION_SERVICES = (NTS)
5) While connecting by sqlplus, I get this errors/messages:
6) Confirmation that I've got admin rights and I am in ORA_DBA:
If u need some more information from me, please let me know!!
Guys please help me to solve this issue, 'cause I've almost got frustrated to find out the solution of this problem. Thank you beforehand!!
Kind regards,
ildar

I have tried to install both of them lots of times but in each case I receive the same in my XE.bat file:
Instance created.
DIM-00019: create service error
O/S-Error: (OS 1387) Unable to add or remove a member from the local group because this member does not exist.
Have checked OS 1387 error at Microsoft Support and as possible cause of the problem they give as follows:
This issue can occur if the environment has a disjointed namespace (i.e. the domain has different NetBIOS and DNS names). For example, assume that the domain has a NetBIOS name of "domain.com" and a DNS name of "domain-old.com." When users are added in the Windows UI, they are displayed in the format of domain\ComputerName. However, you notice in the error log that there was an attempt to add a computer account in the format of domain-old\ComputerName. (System Center 2012 R2 Data Protection Manager install fails and generates ID: 4323: "A member could not be added")
Tried to find out my DNS name, but it is impossible because I don't have any domain installed and my machine is not connected to it. Some other blog (Install Oracle 11gR2 on Windows) advices to work with adding my computer account to some non-real windows domain (just for the purpose of resolving the network) as well and reinstall the database then. If I undestand it right I need minimum 2 machines for this. But I own just one, where the server is based and thought that is enough to run the database... no idea ..

Windows 7 pro x64 and palm centro

I'm running windows 7 pro X64 and the software installed just fine, but not the driver. Does Palm have any plans for a solution? Are there any third party drivers that will solve my problem without having to install a bluetooth device on my pc?
Post relates to: Centro (Verizon)

Hello rpiquette, Welcome to the Palm Support Community!
Palm has moved away from their legacy operating system (PalmOS) and on to a new one called webOS. Since Palm Inc. doesn't even own their own software anymore (Palm Desktop) I'd seriously doubt any further support will be forthcoming for Win7, especially for 64-bit architecture.
Palm Inc. has historically not divulged any "future plans" for software (or hardware). Will a third-party develop a desktop client? I have no idea at this point, but the opportunity certainly exists!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

W520 hangs on Windows 7 Pro x64 installation, cannot boot live CD

Hi Everyone!
I decided to reach out to the community for some intelligence that I have not been able to obtain elsewhere. Here's my story in details in case someone can find a break on any of them ...
I purchased my W520 in November, 2011 with 1 year warranty and used it without issues until last week. One morning when I started the laptop, it loaded Windows 7 Pro x64, I logged in. After loading the desktop, I locked the screen/user and stepped out for a minute. When I came back, the screen was frozen and after a few minutes of waiting I manually powered off the laptop.
Upon restart, Windows 7 would hang on the logo screen and restart in a few minutes. I was able to restart under Safe Mode, however, which enabled me to create the rescue DVD's.
I decided to re-install the OS, but the installation would hang on the Windows logo screen again. This was also attempted with all accessories (usb kbd, usb wireless mouse, and display I also tried w/o the battery) disconnected. Then I thought, that it could be a bad hdd - I tried installing XP Pro but got the BSOD with a bad hdd error code. At that point, I attached the hdd to a working PC and ran checkdisk which found no errors. The problem persisted even with unpartitioned disk and a spare hdd that I had on hand. What intrigued me was that no linux live CD could load (it would freeze on the loading screen).
After this, I flashed the BIOS to the newest version without any issues during the flash process. The Windows 7 Pro x64 installation would hang again at the usual logo screen. I also tried with different DVD source... Memtest did not show any problems either.
Then I called an IT support guy who was not experienced with the issue and took the laptop for bench testing, and after four days of back and forth the IT company was inconclusive that the issues is most likely caused by a bad BIOS.
This happened around March 21, 2013 after Windows 7 installed updates (not sure if this could be related). The weird part is that the W520 worked fine for a year and four months and when it crashed I was able to use Safe Mode, access and flash BIOS, but was unable to run new installation or live CD's.
Is there anything that I am missing? Has anyone had the same experience? What is the conclusion according to you - it is really bad BIOS chip or just a UEFI-related setting?
Thanks for reading and trying to help!
Configuration:
Processor
Intel Core i7-2620M Processor (2.70GHz, 4MB L3)
Operating system
Genuine Windows 7 Professional 64
Operating system language
Genuine Windows 7 Professional 64 English
Display type
15.6" HD+ (1600 x 900) LED Backlit Anti-Glare Display, Mobile Broadband Ready
System graphics
NVIDIA Quadro 1000M Graphics with 2GB DDR3 Memory
Total memory
4 GB DDR3 - 1333MHz (1 DIMM)
Keyboard
Keyboard US English
Pointing device
UltraNav with TrackPoint & touchpad plus Fingerprint reader
Camera
720p Camera
Storage subsystem
Internal RAID - Not Enabled
Hard drive
500 GB Hard Disk Drive, 7200rpm
Optical device
DVD recordable multiburner
System expansion slots
Express Card Slot & 4 in 1 Card Reader
Battery
9 cell Li-Ion Battery - 55++
Power cord
Country Pack North America with Line cord & 170W AC adapter
Integrated WiFi wireless LAN adapters
Intel Centrino Advanced-N + WiMAX 6250
Integrated mobile broadband
Integrated Mobile Broadband - Upgradable
Language pack
Language Pack US English
Fingerprint Reader

Sir:
I'm not entirely sure what you mean when you write "BIOS v1.40 settings that will make it possible to install Windows 7 Pro 64", but, you can download the 1.40 BIOS (which appears to be the most recent release) from this link: Device Driver File Matrix - W520 , and if you have any concerns about the BIOS settings not being appropriate, just enter the BIOS setup manager (tap the F1 key repeatedly when the laptop is booting) and select 'revert to defaults' or similar.
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

Windows XP Pro x64 problem with hardware aud

I just upgraded my computer and with this upgrade I installed Windows XP Pro x64. I am having the following symptoms and I am wondering if they aren't part of a larger problem.
When I run DXDiag (either the 32 or 64bit version) I get the following error message during the tests on the Sound tab: "Your sound card does not support hardware buffering. Sounds will only play back from software buffers.". Is this normal for Windows XP Pro x64. I've used this OS before (with my older system) and never saw that message and used 2 different X-Fi cards during that time!
I also have this problem...While running Thief Deadly Shadows, when I enable "Audio Hardware Mixing" I loose all sound. And I am unable to enable "EAX Advanced HD" and "EAX Multiple Environments".
It seems like I can't enable hardware audio. But I also have Lord of The Rings Online installed and it appears to be using it's hardware audio ok, but when I change from hardware to software it crashes if I don't disable EAX first, so it's not perfect. Is this card faulty or is this typical of WXPx64 or what?
Thanks...
My system specs are: Intel E6850, Asus P5K Deluxe (0404 BIOS), Corsair Twin2X4096-6400DHX, EVGA e-Geforce 8800 GTX, Creative X-Fi Elite Pro, Intel PRO/000 PT Server Adapter, Enermax Galaxy 000W Gamers Edition. I think that's all that's relevant.Message Edited by Zapper_Weisman on 07-27-20070:2 AM

I disabled the Memory Remap Feature in the BIOS and my DXDiag and Thief problems went away. I had a hunch it was related to this. But now my question is, am I just out of luck, in terms of having to sacrifice some of my RAM (3.25GBs instead of 4GBs) to get my sound card working properly? It seems to me that this is a driver issue, as I've read others say that Creative never really supported x64 fully.
Does anyone have anything to offer on this? Thanks...Message Edited by Zapper_Weisman on 07-27-20070:22 AM

Unable to add network printers from Windows Server 2012 R2 to client running Windows 7 Pro x64

New Windows Server 2012 R2 Standard in the environment. Added print services to it and added five HP printers to it and shared them. Also deployed the printers via group policy.
Clients are running Windows 7 Pro x64. The group policy fails to install the printers (error 0x00000002). We get the same error when trying to manually add the printer from the client side.
From Event Viewer: Group Policy was unable to add per computer connection <<printer share>>. Error code 0x2. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.
Any ideas on troubleshooting this?
Thanks.
-John

John,
You might try playing with the HP universal driver, that might help you. Try installing a new shared printer on the server using the universal print driver, then try and connect to it to see if it is any better.
Check these GPO settings to ensure local machines can install the drivers.
1. Configure the following two Group Policy settings:
Computer Configuration\Policies\Administrative Templates\System\Driver Installation\Allow non-administrators to install drivers for these devices setup classesEnabled
2. Device class GUID of printers: {4d36e979-e325-11ce-bfc1-08002be10318}
Computer Configuration/Policies/Administrative Templates/Printers/Point and Print RestrictionsEnabled
Security Prompts: When Installing Drivers for a new connection = Do not show warning or elevation prompt
This article might help you out also:
http://www.eversity.nl/blog/2012/09/windows-cannot-connect-to-the-printer-operation-failed-with-error-0x00000002/
Cheers,
Curt Winter
Certified Microsoft Professional
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

Windows 7 Pro x64 now BSOD just as it is starting and Startup Repair has failed

As the title says, a few days ago my Windows 7 Pro x64 started to BSOD just as Windows is starting but the error screen disappears immediately.
Startup Repair fails and has Problem Signature 04: 21199350
I have used the Windows 7 Pro installation DVD and opened its Command Prompt option and then run the chkdsk and sfc programs but no errors were reported. Also, I ran bootrec with /fixmbr then with /fixboot and finally with /rebuildbcd but it made no difference.
After a failure, the next time I turn on the PC I am offered to repair Windows or to start windows normally. Using the repair from here didn't work as also happened when I chose the repair option from the Windows 7 Pro installation DVD.
Holding down the f8 key when Windows is starting doesn't make any difference.
BTW, the crash happens as the 4 small parts of windows are approaching each other on the Windows start screen.
I can access my hard disk by attaching it to my laptop. If the error 21199350 reported by Startup Repair failure is not the BSOD error, will this be recorded in a file each time it happens? If so, which file?
Any help will be greatly appreciated as I dread having to reinstall Windows 7 Pro from scratch again and all the many programs I spent ages installing.
Thanks
Paul

Sorry for the delay in replying.
This evening I managed to modify the PC registry from the Startup Repair command window so it wouldn't reboot on BSOD.
Used regedit.exe to modify the following in the PC's registry (I followed the 17 July 2011 Terra-byte "Modify the Windows Registry from Startup Repair" article):
[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\CrashControl] and set AutoReboot to 0x00000000.
and also for ControlSet002.
The BSOD error is: 0x0000007B which seems to be a device driver problem.
Would my problem be caused by my installing 2x 2GB DIMMs that I bought on eBay into my Abit AB9 Pro motherboard's two free slots (the other two slots each have 1GB DIMMs) but on power on nothing happened?
Removing the two new DIMMs the PC powered on but then resulted in BSOD.
Thanks
Paul
Error 0x000000tB is a very often reported error. It means INACCESSIBLE BOOT DEVICE. Either something in your BIOS changed the type of storage device (AHCI -> IDE) or your HDD is experiencing a possible failure.
See info @ 0x0000007B (INACCESSIBLE BOOT DEVICE): Fix for Windows XP, Vista, 7, 8, 8.1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Windows 8 Pro x64 (64 bit) ISO

Hi guys,
After searching for what feels like days (but is really only hours), I have still not managed to find a legit ISO image of Windows 8 Pro x64.
The problem I have is that I have the newest iMac and so don't have a cd drive.
I contacted microsoft and dicovered that if I have an ISO image of the version mentioned above, a student upgrade license would actually activate this with no problem.
I am a student and thought that I had to pay £99.99 for the full version but when using microsoft's online chat to get help from a sales advisor I found that if you ordered Windows 8 Pro Student version (x64) with back-up media (which costs nothing extra), you could actually complete a full install using this, only I have the problem of not having a cd drive! I then asked about an ISO image that is copied to a usb stick and she said that this would work fine.
So I just need to find an ISO of Windows 8 Pro (x64) Student version. (I'm not sure if the student version is exactly the same as plain pro version but it should be)
Thanks,
Jack

When you buy and download it should offer Setup Assistant to upgrade if you have Windows or a link to the ISO.
Did when I bought it.
Now because I had Windows 8 I could go and download the full Windows 8.1 Preview, but not if you don't have 8 already.
There is a link to Windows 8 Pro Student
http://www.microsoftstore.com/store/msusa/en_US/cat/categoryID.62684800?WT.mc_id =MSCOM_EN_US_HP_Downloads_Windows

Can't connect to shared printer on Windows 7 Pro x64

I have a print server on Windows 2008 Standard and I have drivers installed for both x86 and x64 archs. The ricoh printer seems to work fine on windows 7 pro x64 but the hp printer will not work correctly. It seems to download/install the drivers but when actually connecting to the printer it errors out.
It says cannot connect to printer.
I can add the printer manually if I use tcp/ip printing instead of connecting to the shared printer. I can't figure out why its not working. Has anyone else seen an error like this? I'm not really sure what is causing this issue.
Thanks!

Hi,
Thanks for the post.
Please also let us know the exact model of this HP printer.
If possible, please reproduce this issue on the Windows7 client and collect the relevant information for further research.
Step 1: Download Process Monitor
======================
1. Please download the Process Monitor at http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
2. Extract the zip file to Desktop.
Step 2: Clean Boot
=============
Let's disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading program or service. Please perform the following steps:
1. Click "Start", go to "Run", and type "msconfig" (without the quotation marks) in the open box to start the System Configuration Utility.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
4. Click "OK" to restart your computer to Selective Startup environment.
5. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System Configuration Utility when Windows starts" box and click OK.
6. Check whether or not the issue still appears in this environment.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We may still manually run these programs later.
Step 3: Collect the Information
=====================
1. Open Procmon.exe (Process Monitor).
2. Reproduce this issue.
3. After that, please click Capture in the tool bar (or directly press Ctrl+E) in Process Monitor.
4. Click Save, in the prompt window, selects “All Events”.
5. Click Browser Button (The button is right to “Path”), in the prompt window, click Desktop, type “test” (without the quotation marks) in the File Name box and press Enter.
6. Find the file, right-click on this file, click "Send To", and click "Compressed (zipped) Folder".
For your convenience, I have created a workspace for you. You can upload the information files to the following link. (Please choose "Send Files to Microsoft")
Workspace URL: (https://sftasia.one.microsoft.com/choosetransfer.aspx?key=7f161e43-e9d9-4654-9077-88c9f57137c6)
Password: YK]yhkqqV0L
Note: Due to differences in text formatting with various email clients, the workspace link above may appear to be broken. Please be sure to include all text between '(' and ')' when typing or copying the workspace link into your browser.
Hope this helps.

Is the Creative ZEN compatible with Windows XP Pro x64 editi

Hello, I recently bought a Zune and then found out it wasn't compatible with my OS, XP Pro x64. I installed the software on my laptop, but it was just too troublesome to set everything up and exchange music, videos, etc. between the two machines. So I've decided to return the Zune and get a Zen instead. I'd really like to buy the ZEN 8GB, but it does not state whether or not the x64 edition is supported. The ZEN V Plus states that the software does support the OS, so if I have to get that one, I don't mind. Thanks.

CRe: Is the Creative ZEN compatible with Windows XP Pro x64 edition?H I recently bought a Zen 8GB mp3 player. I have an xp x64 pro OS. As soon as I tried to instal the included software from the CD, a dialogue box appeared stating, "The windows operating system running on this computer is not supported by this product." I have done everything the technical assistance group has suggested with the samed result including a clean install. I did load it on my 32 bit laptop. It works fine. ONe of the problems I have found is that the correspondance goes to a different person each time and they are not reading the dialogue. I have found a way to make it work (well somewhat) with my 64 bitg machine. Oddly enough thed software for my zen V load on fine but the software is incampatable with the Zen 8GB unit. I think that there are softwarfe problems and CT is not really dealing with them.

G710 Windows 7 Pro x64 Bluetooth + Wireless driver install errors (can't install)

Hi all,
I've recently just purchased the G710 i3 model as a birthday gift for my dad. It originally came with Windows 8 installed but my father prefers Windows 7 so I've installed this on a SSD (replacing the 1TB drive).
After updating Windows 7 Professional x64 with updates via ethernet I started to install all the drivers in the following order:
note: downloaded x64 drivers (for obvious reasons)
chipset
graphics (intel hd4600 first followed by nvidia gt 720m)
NIC LAN
Audio
Bluetooth and Wireless (won't work - see below for errors)
Touchpad
Card Reader
Webcam
Intel Management Engine (ME)
Intel Rapid Storage Technology Driver (RST)
BatteryCare (replacing the Lenovo Energy Management)
I've downloaded all from the Lenovo web site except up to date Chipset, ME and RST from Intel.
All drivers except for the Bluetooth and Wireless have installed fine. All Fn keys work except for the "Airplane Mode" (guessing due to the driver not being installed).
These are the following errors I get:
http://i618.photobucket.com/albums/tt265/aniceguy85/forums_keep/x64_error01.png~original
after clicking on OK ... I get the following
http://i618.photobucket.com/albums/tt265/aniceguy85/forums_keep/x64_error02.png~original
after clicking on OK ... there is another message displayed in the CMD window directly underneath the 1st one which is exactly the same text. Both windows then immediately close.
I tried the 32 bit version of the driver and got exactly the same result.
Can this be fixed so it can work? I'm hoping it's not just me.
Thanks for any help in advance, Pete

hi pete_agreatguy,
Welcome to Lenovo Community Forums!
The extraction maybe looking at a missing folder.
When you downloaded the driver
WLAN and Bluetooth Driver (Intel, Broadcom, Qualcomm) for 64-bit Windows
When you doubleclick it it should pop up a winodw where you hit next , agree then it shows a page where you can see a box with a browse button. can you share if you are getting that?
like this:
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

ACPI\VPC2004 Unknown Device - Lenovo g560 windows 7 pro. x64 installed

I just bought Lenovo g560. And installed windows 7 pro. x64 and installed drivers from driver cd shipped with laptop (windows 7 drivers). After installed all drivers still I had one device unknown ; device id = Acpi\Vpc2004. In the Windows 7 solution center, there was message about download energycut and install. I downloaded and install energycut. But nothing changed and power management option program not working too.
I googled so much and couldn't find any solution.
+++
Actually there very interesting situation, there is any driver or support about lenovo g560 on lenovo global support site. And auto detect is not working too.
Did I made mistake to buy lenovo instead of thinkpad???
If somebody have solution about this acpi\vpn2004 driver please help.
Because like that when sleep or lid laptop not waking up.
After hibernate and start computer, having blue screen and system halted message. until start without resume system.
Solved!
Go to Solution.

I googled this: "ACPI\VPC2004 Unknown Device"
Third hit was THIS at another Lenovo forum.
Is this your solution?

ITunes 7.6 and Windows XP Pro x64 ---- 64 bit version of Windows XP Pro

My wife was given an iPod nano, so I downloaded the current version of iTunesSetup.exe from www.apple.com and tried to run the executable. It told me that it wasn't designed to install iTunes on my 64 bit version of Windows XP Pro, and that I should go back to www.apple.com and download the 64 bit installer. I went back to www.apple.com and searched for the 64 bit installer in vain. There is only one main link to the current installer and the website determines which version of the installer you're given. After a few google searches I managed to aquire iTunes64setup.exe from the Apple site. I ran the executable and it told me "This iTunes installer requires that your computer is running Windows Vista 64-bit" and then it gave me the option to exit. I ended up installing iTunes from the executable I had originally downloaded. I have iTunes 7.6.2.9 installed now but it doesn't detect, or can't operate my DVD burner, so I can't rip music with iTunes for use on my wife's nano. I get this error report when I run the Diagnostic test built into iTunes.
"Microsoft Windows XP Professional x64 Edition Service Pack 2 (Build 3790)
System manufacturer System Product Name
iTunes 7.6.2.9
QuickTime 7.4.5
CD Driver Not Available
CD Driver DLL Not Available
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number xxxxxxxxxxxxxxxx
Current user is an administrator.
The current local date and time is 2008-04-30 23:34:07.
iTunes is not running in safe mode.
Video Display Information
Standard VGA Graphics Adapter
NVIDIA GeForce 8800 GT
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
LowerFilters: Afc
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel."
And there was no change in the diagnostic when I first tried to repair the install and then tried to reinstall iTunes. I'm sure the burner is working because I can play music, watch movies and all the normal stuff a DVD burner can do using Nero.
I'm guessing I need an iTunes version of 64 bit optical drive driver.
Any help would be appreciated!
Cinder's
<Edited by Moderator>

I got the iTunes 7 to work on XP Pro 64bit. What I did was this:
1. Downloaded DriverInstaller_AMD64EM64T.exe
2. Installed it.
3. Created this file tree: C:\Windows\Sysnative\drivers (Easier terminology, I went into the Windows folder and created a folder named "sysnative", opened that folder and created another folder called "drivers".
4. Then I located the folder where I installed DriverInstaller_AMD64EM64T.exe ..
5. I took the file called GEARAspiWDM and COPIED IT. I DID NOT MOVE THIS FILE!!!
6. I pasted a COPY of this file into sysnative\drivers. The folder I just made.
7. I installed iTunes 7, not 7.6. 7.6 and this method won't solve the burning issue. That would require more programs and more patients.
Note, you will have to manipulate iTunes when you want to burn. The best way to do this, I found, was to simply make a playlist and right click the playlist on the left column and select burn to disk. It should act normally.
Message was edited by: Nexis

SB0090 Windows XP Pro X64 ed. driv

Similar Messages

Maybe you are looking for