SBA 8.0 (Hor) to SBA 8.0 (Ver) Industry Application Post Upgrade Problem!

Hi All,
I am testing out an upgrade from Siebel 8.0 (Horizontal) to Siebel 8.0 (Vertical) version.
Post upgrade after GUI Fixes, i did a full compile of siebel_sia.srf!
But, after i start my Siebel Services & try to access the Sales or High Tech Manufacturing Application, it doesnt come up.
The log file for both says:
"siebsrvr\log\SSEObjMgr_enu_0025_26214410.log 8.0 SIA [20405] ENU
ObjMgrSRFLog Error 1 00000006486b09f4:0 2008-07-02 13:33:39 (cdf.cpp (668)) SBL-DAT-00142: Could not open repository file 'd:\sia80\siebsrvr\objects\enu\siebel_sia.srf'.
File does not exist or may be in use by another process.
ObjMgrCTLog Error 1 00000006486b09f4:0 2008-07-02 13:33:39 (ctxtmgr.cpp (4492)) SBL-SVC-00208: Please login first."
Any idea why this is happening? The SRF file exists on the correct location & i dont see any other application accessing the same.
Regards,
Shalabhsneha

Double-check with Siebel Tools that is the same file.
Check that the new Siebel application is shut down properly and has no "dangling" processes before restart.

Similar Messages

Saturn (Phoenix+) MS-6309 ATX form-factor motherboard

my mother board says it can support agp x4, but i have a new grapgics card a MSI geforce 4 ti 4200. and it says it is only running at x2. how do i make the computer run this new card at x4?
cheers

agp 1.0 means board cannot run agpx4
Product Family Saturn (Phoenix+) MS-6309 ATX form-factor motherboard
Category Core
Product Introduction
Table of Contents
Revision History
Specifications
Form Factor
CPU Support
System Memory
Core Logic (Chipset)
BIOS Specifications
Upgrade Options
Connectors on board
Compliance
Revision History
Partnumbers Revision # Changes
6780660200
6780660300 1.0 -
6780660400 1.1 4 USB ports support
6780660500 1.1 -
6780660800 1.2 CPU stepping D0 support
Specifications
Form Factor:
ATX 30.4cm. x 19.2cm Form Factor
CPU Support:
Socket 370
Supports Intel PIII Coppermine FC-PGA (Flip-Chip Pin Grid Array) processor 600/100 - 850/100 MHz
Supports Intel PIII Coppermine FC-PGA (Flip-Chip Pin Grid Array) processor 600/133 - 1000/133 MHz
Note: above CPU's are only supported with the latest BIOS version.
66/100/133 MHz Host bus speed processors are supported.
System Memory:
Supports 6 memory banks (3 slots) using three 168-pin unbuffered DIMM.
Supports single or double-sided DIMMS with gold-plated contacts at a clock speed of 66, 100 or 133 MHz.
CPU Bus Frequency Memory Frequency Supported
66 MHz 66, 100 or 133 MHz
100 MHz 66, 100 or 133 MHz
133 MHz 100 or 133 MHz
Supports a maximum memory size of:
768 (128-bit technology) or 384 MB (64-bit technology) registered DIMMs
1.5 GB unregistered DIMMS (256-bit technology)
Supports 3.3 V SDRAM DIMMs
ECC memory checking is supported
Core Logic (Chipset): VIA Apollo Pro133A
VT82C694X system controller
AGP/PCI/ISA Mobile and Deep Green PC ready
GTL+ host bus supports write-combine cycles
Supports separately powered 3.3 V (5 V tolerant) interface system memory, AGP, and PCI bus.
CPU Interface
66/100/133 MHz CPU Front side bus
Sleep mode support
AGP Controller
Synchronous and pseudo-synchronous with the host CPU bus with optimal skew control
PCI AGP CPU Mode
33 MHz 66 MHz 133 MHz 4x synchronous
33 MHz 66 MHz 100 MHz 2x synchronous
33 MHz 66 MHz 66 MHz 1x synchronous
AGP 2.0 compliant
Supports SideBand Addressing (SBA) mode
Graphics Address Relocation Table (GART)
PCI Bus Controller
Supports up to 5 PCI masters
PCI 2.1 compliant, 32-bit 3.3 V PCI interface with 5 V tolerant input
Advanced DRAM controller
DRAM interface synchronous with host CPU (66/100/133 MHz) or AGP (66 MHz) for most flexible configuration
Concurrent CPU, AGP, and PCI access
Different DRAM types may be used in mixed combinations (FP, EDO, SDRAM, ESDRAM and VCM SDRAM)
Different timing for each bank
Optional bank-by-bank ECC (single-bit error correction and multi-bit error detection) or EC (Error Checking only) for DRAM integrity
Advanced System Power Management Support
Dynamic power down of SDRAM
Independent clock stop controls for CPU/SDRAM, AGP, and PCI bus.
Suspend-to-DRAM and Self-Refresh operation
510 pin BGA package
VT82C686A PCI to ISA bridge
PC98 compliant PCI to ISA bridge
Integrated ISA Bus controller with integrated DMA, timer, and interrupt controller
Integrated Keyboard controller with PS/2 mouse support
Integrated DS12885-style real Time Clock (RTC) with extended 256byte CMOS RAM and day/month alarm for ACPI
Integrated USB controller with root hub and four function ports
Integrated UltraDMA-33/66 master mode EIDE controller with enhanced PCI bus commands
PCI 2.2 compliant with delay transaction and remote power management
Supports Type F DMA transfers
Distributed DMA support for ISA legacy DMA across the PCI bus
UltraDMA-33/66 Master Mode PCI EIDE Controller
Dual channel master mode PCI supporting 4 Enhanced IDE devices
Transfer rate up to 33 MB/sec to cover PIO Mode 4, multi-word DMA mode 2 drives, and UltraDMA-33 interface
Support ATAPI compliant devices including DVD devices
Supports PCI native and ATA compatibility modes
Integrated Super I/O controller
Supports two serial ports, IR port, parallel port, and floppy disk controller functions.
Two UARTs for complete serial ports
One dedicated IR port
Multi-mode parallel port: standard mode, EPP and ECP support
Floppy disk controller (16 bytes of FIFO, data rates up to 1Mbps)
USB controller
USB v1.1 and Intel Universal HCI v1.1compatible
Legacy keyboard and PS/2 mouse support
Voltage, Temperature, Fan speed Monitor and Controller
five positive voltage, three temperature, and two fan-speed monitorings
programmable control, status, monitor, and alarm for flexible desktop management
internal core VCC voltage sensing
System Management Bus Interface
Plug and Play controller
352 pin BGA package
256-byte battery-backed CMOS SRAM Real Time Clock (3 volts lithium battery - CR2032).
BIOS Specifications
AMI BIOS with Plug and Play, Advanced Configuration and Power Interface, Advanced Power Management, and Desktop Management Interface support.
2Mbits flash device.
Language support: English.
POST
Upgrade Options
5 PCI extension slots
1 AGP connector
1 Audio Modem Riser connector
Bios: flashable Ami BIOS
Memory:
Supports single or double-sided DIMMS with gold-plated contacts at a clock speed of 66, 100 or 133 MHz.
Supports a maximum memory size of
768 (128-bit technology) or 384 MB (64-bit technology) registered DIMMs
1.5 GB unregistered DIMMS (256-bit technology)
Supports 3.3 V SDRAM DIMMs.
ECC memory checking is supported
8 to 512 MB memory modules are supported
CPU:
Socket 370
Supports Intel PIII Coppermine FC-PGA (Flip-Chip Pin Grid Array) processor 600/100, 650/100, 700/100 MHz and faster.
Supports Intel PIII Coppermine FC-PGA (Flip-Chip Pin Grid Array) processor 600/133, 667/133, 733/133 MHz, 800/133 MHz, 866/133 MHz, 933/133 MHz, 1000/133 MHz and faster.
66/100/133 MHz Host bus speed processors are supported.
Connectors on board
5 PCI bus masters slots
1 AGP slot
1 AMR slot
1 socket 370
3 DIMM
2 IDE
1 Floppy
1 CPU fan
1 System fan
1 ATX power supply
1 Wake-on-LAN
1 Front panel header
1 Front USB header
Compliance
Specification Description
ATX ATX form factor specifications
AGP 1.0 Accelerated Graphics Port
you need agpx 4 graphics port

Synchronisation outlook mac et connection wifi

Bonjour,
Quand je synchronise Outlook mac 2011 (envoyer/recevoir), un message d'erreur avec bip s'affiche "Invalid mailbox ORANGE/SOSH" et "Invalid mailbox SFR/Orange" en bas à droite à côté de "connecté à..." alors que mon opérateur internet est Numericable.... je n'y comprends rien!
En revanche, cela ne perturbe pas l'envoi et la réception de mes mails. C'est juste énervant.
Par contre, lorsque je ne suis pas chez moi, donc hors de portée de mon Wifi, une fenêtre s'affiche me demandant de vérifer ma connexion internet.
Cette fenêtre est TRES agaçante, elle apparait plusieurs fois de suite et pour la faire disparaître, il faut cliquer sur "oui".
En plus, elle bloque l'utilisation du clavier, pas moyen de l'ignorer.
Je n'arrive pas à faire disparaître ses deux choses.
Qui peut m'aider...? SVP?
Merci d'avance,
Hélène

Impossible to launch the app calendar and since 10:00AM, no WiFi connection because my macbook re-knows no more network!
The display was uncertain yesterday evening, I thought that it was the Word document which have a bug, but this morning is the even worse more recognition of no WiFi network, all at once.
I launched a scan with avast, but it doesn't find any virus, and nevertheless...
For a week I could not launch any more the app calendar without it fall down at the beginning by posting " upgrade of calendars " and then crash in rule.
Since I am on Mac it's good the 1st time when I am annoyed, but there it is decent, I cannot work any more.
Somebody sees where from it can come?
I updated with Mavericks 10.9.0 and it is more or less since that there is a problem, coincidence or not?

Table error

hi
i have this problem with my database structure, but after execute a check of structure don't appear any error.
in the kerneldialog error file appear this message
2008-11-15 09:40:05    33 ERR 51080 SYSERROR -9211 KB Stack type illegal
2008-11-15 09:40:05    33 ERR     5 Join     violation of internal data structure
2008-11-15 09:40:05    34 ERR 51080 SYSERROR -9211 KB Stack type illegal
2008-11-15 09:40:05    34 ERR     5 Join     violation of internal data structure
how can i fix this problem¡

hi
the database information is this
version:
version,os,dbroot,logon,code,swap
"7.6.05","UNIX","/base/PERSEO",False,ASCII,2
parameters:
KERNELVERSION                         KERNEL    7.6.05   BUILD 009-123-191-997
INSTANCE_TYPE                         OLTP
MCOD                                  NO
SERVERDBFOR_SAP                     YES
_UNICODE                              YES
DEFAULT_CODE                          ASCII
DATE_TIME_FORMAT                      INTERNAL
CONTROLUSERID                         DBM
CONTROLPASSWORD
MAXLOGVOLUMES                         4
MAXDATAVOLUMES                        64
LOG_VOLUME_NAME_002                   /data/LOG/PERSEO/DISKL0002
LOG_VOLUME_NAME_001                   /data/LOG/PERSEO/DISKL0001
LOG_VOLUME_TYPE_002                   F
LOG_VOLUME_TYPE_001                   F
LOG_VOLUME_SIZE_002                   51200
LOG_VOLUME_SIZE_001                   51200
DATA_VOLUME_NAME_0002                 /data/PERSEO/DISKD0002
DATA_VOLUME_NAME_0001                 /data/PERSEO/DISKD0001
DATA_VOLUME_TYPE_0002                 F
DATA_VOLUME_TYPE_0001                 F
DATA_VOLUME_SIZE_0002                 524288
DATA_VOLUME_SIZE_0001                 524288
DATA_VOLUME_MODE_0002                 NORMAL
DATA_VOLUME_MODE_0001                 NORMAL
DATA_VOLUME_GROUPS                    1
LOG_BACKUP_TO_PIPE                    NO
MAXBACKUPDEVS                         2
LOG_MIRRORED                          NO
MAXVOLUMES                            69
LOG_IO_BLOCK_COUNT                    8
DATA_IO_BLOCK_COUNT                   64
BACKUP_BLOCK_CNT                      64
DELAYLOGWRITER                      0
LOG_IO_QUEUE                          50
RESTARTTIME                         600
MAXCPU                                4
LOCAL_REDO_LOG_BUFFER_SIZE            0
MAX_LOG_QUEUE_COUNT                   0
USED_MAX_LOG_QUEUE_COUNT              4
LOG_QUEUE_COUNT                       0
MAXUSERTASKS                          100
TRANSRGNS                           8
TABRGNS                             8
OMSREGIONS                          0
OMSRGNS                             7
LOCKMANAGERENABLED                  NO
LMLOCK_REGIONS                      0
LMREQUEST_REGIONS                   0
LMTRANS_REGIONS                     0
OMS_HEAP_LIMIT                        0
OMS_HEAP_COUNT                        4
OMS_HEAP_BLOCKSIZE                    10000
OMS_HEAP_THRESHOLD                    100
OMS_VERS_THRESHOLD                    2097152
HEAP_CHECK_LEVEL                      0
ROWRGNS                             8
RESERVEDSERVERTASKS                   69
MINSERVERTASKS                        134
MAXSERVERTASKS                        134
MAXGARBAGECOLL                      1
_MAXTRANS                             804
MAXLOCKS                              8040
LOCKSUPPLY_BLOCK                    100
DEADLOCK_DETECTION                    4
DEADLOCK_DUMP_FILENAME
SESSION_TIMEOUT                       900
OMS_STREAM_TIMEOUT                    30
REQUEST_TIMEOUT                       5000
IOPROCSPER_DEV                      2
IOPROCSFOR_PRIO                     0
IOPROCSFOR_READER                   0
USEIOPROCS_ONLY                     NO
IOPROCSSWITCH                       2
LRU_FOR_SCAN                          NO
PAGESIZE                            8192
PACKETSIZE                          131072
MINREPLYSIZE                        4096
MBLOCKDATA_SIZE                     32768
MBLOCKQUAL_SIZE                     32768
MBLOCKSTACK_SIZE                    32768
MBLOCKSTRAT_SIZE                    16384
WORKSTACKSIZE                       8192
WORKDATASIZE                        8192
CATCACHE_MINSIZE                    262144
CAT_CACHE_SUPPLY                      196992
INIT_ALLOCATORSIZE                    262144
ALLOW_MULTIPLE_SERVERTASK_UKTS        NO
TASKCLUSTER01                       tw;al;ut;2000sv,100bup;10ev,10gc;
TASKCLUSTER02                       ti,100dw;25us;
TASKCLUSTER03                       equalize
DYNTASK_STACK                       NO
MPRGN_QUEUE                         YES
MPRGN_DIRTY_READ                    DEFAULT
MPRGN_BUSY_WAIT                     DEFAULT
MPDISP_LOOPS                        2
MPDISP_PRIO                         DEFAULT
MP_RGN_LOOP                           -1
MPRGN_PRIO                          DEFAULT
MAXRGN_REQUEST                        -1
PRIOBASE_U2U                        100
PRIOBASE_IOC                        80
PRIOBASE_RAV                        80
PRIOBASE_REX                        40
PRIOBASE_COM                        10
PRIOFACTOR                          80
DELAYCOMMIT                         NO
MAXTASKSTACK                        1024
MAX_SERVERTASK_STACK                  500
MAX_SPECIALTASK_STACK                 500
DWIO_AREA_SIZE                      50
DWIO_AREA_FLUSH                     50
FBM_VOLUME_COMPRESSION                50
FBM_VOLUME_BALANCE                    10
FBMLOW_IO_RATE                      10
CACHE_SIZE                            393984
DWLRU_TAIL_FLUSH                    25
XP_DATA_CACHE_RGNS                    0
DATACACHE_RGNS                      64
XP_CONVERTER_REGIONS                  0
CONVERTER_REGIONS                     8
XP_MAXPAGER                           0
MAXPAGER                              64
SEQUENCE_CACHE                        1
IDXFILELIST_SIZE                    2048
VOLUMENO_BIT_COUNT                    8
OPTIM_MAX_MERGE                       500
OPTIM_INV_ONLY                        YES
OPTIM_CACHE                           NO
OPTIM_JOIN_FETCH                      0
JOIN_SEARCH_LEVEL                     0
JOIN_MAXTAB_LEVEL4                    16
JOIN_MAXTAB_LEVEL9                    5
READAHEADBLOBS                      32
READAHEAD_TABLE_THRESHOLD             0
CLUSTER_WRITE_THRESHOLD               80
CLUSTERED_LOBS                        NO
CLUSTERCOMPRESSIONTHRESHOLD           1000
CLUSTERCOMPRESSIONFILLTHRESHOLD      10
RUNDIRECTORY                          /var/opt/sdb/data/wrk/PERSEO
OPMSG1                                /dev/console
OPMSG2                                /dev/null
_KERNELDIAGFILE                       knldiag
KERNELDIAGSIZE                        800
_EVENTFILE                            knldiag.evt
_EVENTSIZE                            0
_MAXEVENTTASKS                        2
_MAXEVENTS                            100
_KERNELTRACEFILE                      knltrace
TRACE_PAGES_TI                        2
TRACE_PAGES_GC                        20
TRACE_PAGES_LW                        5
TRACE_PAGES_PG                        3
TRACE_PAGES_US                        10
TRACE_PAGES_UT                        5
TRACE_PAGES_SV                        5
TRACE_PAGES_EV                        2
TRACE_PAGES_BUP                       0
KERNELTRACESIZE                       1899
EXTERNAL_DUMP_REQUEST                 NO
AKDUMP_ALLOWED                      YES
_KERNELDUMPFILE                       knldump
_RTEDUMPFILE                          rtedump
UTILITYPROTFILE                     dbm.utl
UTILITY_PROTSIZE                      100
BACKUPHISTFILE                      dbm.knl
BACKUPMED_DEF                       dbm.mdf
MAXMESSAGE_FILES                    0
_SHMKERNEL                            16747
__PARAM_CHANGED___                    0
__PARAM_VERIFIED__                    2008-10-13 02:35:17
DIAG_HISTORY_NUM                      2
DIAG_HISTORY_PATH                     /var/opt/sdb/data/wrk/PERSEO/DIAGHISTORY
DIAGSEM                             1
SHOW_MAX_STACK_USE                    NO
SHOW_MAX_KB_STACK_USE                 NO
LOG_SEGMENT_SIZE                      17066
_COMMENT
SUPPRESS_CORE                         YES
FORMATTING_MODE                       PARALLEL
FORMAT_DATAVOLUME                     YES
OFFICIAL_NODE
LOAD_BALANCING_CHK                    0
LOAD_BALANCING_DIF                    10
LOAD_BALANCING_EQ                     5
HS_STORAGE_DLL                        libhsscopy
HS_SYNC_INTERVAL                      50
USE_OPEN_DIRECT                       NO
USE_OPEN_DIRECT_FOR_BACKUP            NO
SYMBOL_DEMANGLING                     NO
EXPAND_COM_TRACE                      NO
JOIN_TABLEBUFFER                      128
SET_VOLUME_LOCK                       YES
SHAREDSQL                             YES
SHAREDSQL_CLEANUPTHRESHOLD            25
SHAREDSQL_COMMANDCACHESIZE            262144
MEMORY_ALLOCATION_LIMIT               0
USE_SYSTEM_PAGE_CACHE                 YES
USE_COROUTINES                        YES
FORBID_LOAD_BALANCING                 NO
MIN_RETENTION_TIME                    60
MAX_RETENTION_TIME                    480
MAX_SINGLE_HASHTABLE_SIZE             512
MAX_HASHTABLE_MEMORY                  5120
ENABLE_CHECK_INSTANCE                 YES
RTE_TEST_REGIONS                      0
HASHED_RESULTSET                      YES
HASHED_RESULTSET_CACHESIZE            262144
CHECK_HASHED_RESULTSET                0
AUTO_RECREATE_BAD_INDEXES             YES
AUTHENTICATION_ALLOW
AUTHENTICATION_DENY
TRACE_AK                              NO
TRACE_DEFAULT                         NO
TRACE_DELETE                          NO
TRACE_INDEX                           NO
TRACE_INSERT                          NO
TRACE_LOCK                            NO
TRACE_LONG                            NO
TRACE_OBJECT                          NO
TRACE_OBJECT_ADD                      NO
TRACE_OBJECT_ALTER                    NO
TRACE_OBJECT_FREE                     NO
TRACE_OBJECT_GET                      NO
TRACE_OPTIMIZE                        NO
TRACE_ORDER                           NO
TRACE_ORDER_STANDARD                  NO
TRACE_PAGES                           NO
TRACE_PRIMARY_TREE                    NO
TRACE_SELECT                          NO
TRACE_TIME                            NO
TRACE_UPDATE                          NO
TRACE_STOP_ERRORCODE                  0
TRACE_ALLOCATOR                       0
TRACE_CATALOG                         0
TRACE_CLIENTKERNELCOM                 0
TRACE_COMMON                          0
TRACE_COMMUNICATION                   0
TRACE_CONVERTER                       0
TRACE_DATACHAIN                       0
TRACE_DATACACHE                       0
TRACE_DATAPAM                         0
TRACE_DATATREE                        0
TRACE_DATAINDEX                       0
TRACE_DBPROC                          0
TRACE_FBM                             0
TRACE_FILEDIR                         0
TRACE_FRAMECTRL                       0
TRACE_IOMAN                           0
TRACE_IPC                             0
TRACE_JOIN                            0
TRACE_KSQL                            0
TRACE_LOGACTION                       0
TRACE_LOCKMANAGER                     0
TRACE_LOGHISTORY                      0
TRACE_LOGPAGE                         0
TRACE_LOGTRANS                        0
TRACE_LOGVOLUME                       0
TRACE_MEMORY                          0
TRACE_MESSAGES                        0
TRACE_OBJECTCONTAINER                 0
TRACE_OMS_CONTAINERDIR                0
TRACE_OMS_CONTEXT                     0
TRACE_OMS_ERROR                       0
TRACE_OMS_FLUSHCACHE                  0
TRACE_OMS_INTERFACE                   0
TRACE_OMS_KEY                         0
TRACE_OMS_KEYRANGE                    0
TRACE_OMS_LOCK                        0
TRACE_OMS_MEMORY                      0
TRACE_OMS_NEWOBJ                      0
TRACE_OMS_SESSION                     0
TRACE_OMS_STREAM                      0
TRACE_OMS_VAROBJECT                   0
TRACE_OMS_VERSION                     0
TRACE_PAGER                           0
TRACE_RUNTIME                         0
TRACE_SHAREDSQL                       0
TRACE_SQLMANAGER                      0
TRACE_SRVTASKS                        0
TRACE_SYNCHRONISATION                 0
TRACE_SYSVIEW                         0
TRACE_TABLE                           0
TRACE_VOLUME                          0
CHECK_BACKUP                          NO
CHECK_DATACACHE                       NO
CHECK_KB_REGIONS                      NO
CHECK_LOCK                            NO
CHECK_LOCK_SUPPLY                     NO
CHECK_REGIONS                         NO
CHECK_TASK_SPECIFIC_CATALOGCACHE      NO
CHECK_TRANSLIST                       NO
CHECK_TREE                            NO
CHECK_TREE_LOCKS                      NO
CHECK_COMMON                          0
CHECK_CONVERTER                       0
CHECK_DATAPAGELOG                     0
CHECK_DATAINDEX                       0
CHECK_FBM                             0
CHECK_IOMAN                           0
CHECK_LOGHISTORY                      0
CHECK_LOGPAGE                         0
CHECK_LOGTRANS                        0
CHECK_LOGVOLUME                       0
CHECK_SRVTASKS                        0
OPTIMIZE_AGGREGATION                  YES
OPTIMIZE_FETCH_REVERSE                YES
OPTIMIZE_STAR_JOIN                    YES
OPTIMIZE_JOIN_ONEPHASE                YES
OPTIMIZE_JOIN_OUTER                   YES
OPTIMIZE_MIN_MAX                      YES
OPTIMIZE_FIRST_ROWS                   YES
OPTIMIZE_OPERATOR_JOIN                YES
OPTIMIZE_JOIN_HASHTABLE               YES
OPTIMIZE_JOIN_HASH_MINIMAL_RATIO      1
OPTIMIZE_OPERATOR_JOIN_COSTFUNC      YES
OPTIMIZE_JOIN_PARALLEL_MINSIZE        1000000
OPTIMIZE_JOIN_PARALLEL_SERVERS        0
OPTIMIZE_JOIN_OPERATOR_SORT           YES
OPTIMIZE_QUAL_ON_INDEX                YES
DDLTRIGGER                            YES
SUBTREE_LOCKS                         NO
MONITOR_READ                          2147483647
MONITOR_TIME                          2147483647
MONITOR_SELECTIVITY                   0
MONITOR_ROWNO                         0
CALLSTACKLEVEL                        0
OMS_RUN_IN_UDE_SERVER                 NO
OPTIMIZE_QUERYREWRITE                 OPERATOR
TRACE_QUERYREWRITE                    0
CHECK_QUERYREWRITE                    0
PROTECT_DATACACHE_MEMORY              NO
FILEDIR_SPINLOCKPOOL_SIZE             10
TRANS_HISTORY_SIZE                    0
TRANS_THRESHOLD_VALUE                 60
ENABLE_SYSTEM_TRIGGERS                YES
DBFILLINGABOVELIMIT                   70L80M85M90H95H96H97H98H99H
DBFILLINGBELOWLIMIT                   70L80L85L90L95L
LOGABOVELIMIT                         50L75L90M95M96H97H98H99H
AUTOSAVE                              1
BACKUPRESULT                          1
CHECKDATA                             1
EVENT                                 1
ADMIN                                 1
ONLINE                                1
UPDSTATWANTED                         1
OUTOFSESSIONS                         3
ERROR                                 3
SYSTEMERROR                           3
DATABASEFULL                          1
LOGFULL                               1
LOGSEGMENTFULL                        1
STANDBY                               1
USESELECTFETCH                        YES
USEVARIABLEINPUT                      NO
UPDATESTAT_PARALLEL_SERVERS           0
UPDATESTAT_SAMPLE_ALGO                1
SIMULATE_VECTORIO                     NEVER
COLUMNCOMPRESSION                     YES
TIME_MEASUREMENT                      NO
CHECK_TABLE_WIDTH                     NO
MAX_MESSAGE_LIST_LENGTH               100
SYMBOL_RESOLUTION                     YES
PREALLOCATE_IOWORKER                  NO
CACHE_IN_SHARED_MEMORY                NO
INDEX_LEAF_CACHING                    2
NO_SYNC_TO_DISK_WANTED                NO
SPINLOCK_LOOP_COUNT                   30000
SPINLOCK_BACKOFF_BASE                 1
SPINLOCK_BACKOFF_FACTOR               2
SPINLOCK_BACKOFF_MAXIMUM              64
ROW_LOCKS_PER_TRANSACTION             50
USEUNICODECOLUMNCOMPRESSION           NO
FBM_CLUSTER_MODE                      MIXED
objects ddl's :
CREATE TABLE "TRANSACCION"."TRANSACCION"
     "TRNS_ID" Integer NOT NULL DEFAULT SERIAL (2141016),
     "PROD_ID" Integer,
     "TITR_ID" Integer,
     "TRNS_IDTRANSACCION" Integer,
     "TRNS_VALOR" Fixed (17,2),
     "TRNS_ESTADO" Varchar (2) ASCII DEFAULT '1',
     "TRNS_REGISTRADOPOR" Integer,
     "TRNS_FECHAREGISTRO" Timestamp,
     PRIMARY KEY("TRNS_ID"),
     CONSTRAINT "TRNS_ESTADO_CTR" CHECK     "TRNS_ESTADO " IN (0,1,2),
     FOREIGN KEY "PRODUCTO_TRANSACCION"     ("PROD_ID") REFERENCES "PRODUCTO"."PRODUCTO" ("PROD_ID") ON DELETE RESTRICT,
     FOREIGN KEY "TIPOTRANSACCION_TRANSACCION"     ("TITR_ID") REFERENCES "TRANSACCION"."TIPOTRANSACCION" ("TITR_ID") ON DELETE RESTRICT
COMMENT ON TABLE "TRANSACCION" IS 'TABLA CONTIENE LOS REGISTROS DE LAS TRANSACCIONES QUE SE REALIZAN EN LA OPERACION LOGISTICA DE MOVILRED'
COMMENT ON COLUMN "TRANSACCION"."TRNS_ID" IS 'LLAVE PRIMARIA DE LA TABLA TRANSACCION.TRANSACCION'
COMMENT ON COLUMN "TRANSACCION"."PROD_ID" IS 'LLAVE FORANEA DE LA TABLA PRODUCTO.PRODUCTO'
COMMENT ON COLUMN "TRANSACCION"."TITR_ID" IS 'LLAVE FORANEA DE LA TABLA TRANSACCION.TIPOTRANSACCION'
COMMENT ON COLUMN "TRANSACCION"."TRNS_IDTRANSACCION" IS 'CAMPO QUE TRAE EL ID DE LAS DIFERENTES   TRANACCIONES QUE SE REALIZAN LAS CUALES PRIMARY KEYS'
COMMENT ON COLUMN "TRANSACCION"."TRNS_VALOR" IS 'CAMPO CONTIENE EL VALOR POR EL CUAL FUE GENERADO LA TRANSACCION'
COMMENT ON COLUMN "TRANSACCION"."TRNS_ESTADO" IS 'PRIMERA TRANSACCION SIEMPRE SERA ESTADO 0 (FALLIDA) POR SER PRIMERA INSERCION AUN NO SE HA VERIFICADO CON EL OPERADOR'
COMMENT ON COLUMN "TRANSACCION"."TRNS_REGISTRADOPOR" IS 'CAMPO CONTIENE EL ID DEL USUARIO QUE REALIZO EL REGISTRO'
COMMENT ON COLUMN "TRANSACCION"."TRNS_FECHAREGISTRO" IS 'CAMPO CONTIENE FECHA Y HORA DE GENERACION DEL REGISTRO'
CREATE TABLE "RECARGA"."RECARGA"
     "RECA_ID" Integer NOT NULL DEFAULT SERIAL (2141016),
     "DISP_ID" Integer,
     "TERC_ID" Integer,
     "ESRC_ID" Integer,
     "RECA_VALOR" Fixed (15,2),
     "RECA_FECHATRANSACCION" Timestamp,
     "RECA_RESPUESTA" Varchar (10) ASCII,
     "USUA_ID" Integer,
     "OPER_ID" Integer,
     "RECA_NUMERO" Varchar (30) ASCII,
     "RECA_AUTORIZACION" Varchar (100) ASCII,
     "RECA_REGISTRADOPOR" Integer,
     "RECA_FECHAREGISTRO" Timestamp,
     PRIMARY KEY("RECA_ID"),
     FOREIGN KEY "TERCERO_RECARGA"     ("TERC_ID") REFERENCES "CLIENTE"."TERCERO" ("TERC_ID") ON DELETE RESTRICT,
     FOREIGN KEY "DISPOSITIVO_RECARGA"     ("DISP_ID") REFERENCES "DISPOSITIVO"."DISPOSITIVO" ("DISP_ID") ON DELETE RESTRICT,
     FOREIGN KEY "ESTADORECARGA_RECARGA"     ("ESRC_ID") REFERENCES "RECARGA"."ESTADORECARGA" ("ESRC_ID") ON DELETE RESTRICT
COMMENT ON TABLE "RECARGA" IS 'TABLA CONTIENE LAS SOLICITUDES DE RECARGA QUE SE HAN REALIZADO CON SU RESPECTIVO ESTADO, MONTO, OPERADOR Y PUNTO DE VENTA '
COMMENT ON COLUMN "RECARGA"."RECA_ID" IS 'LLAVE PRIMARIA DE LA TABLA   RECARGA'
COMMENT ON COLUMN "RECARGA"."DISP_ID" IS 'CAMPO CONTIENE EL ID DE   DISPOSITIVO Y ES LLAVE FORANEA DE LA TABLA DISPOSITIVO.DISPOSITIVO'
COMMENT ON COLUMN "RECARGA"."TERC_ID" IS 'CAMPO CONTIENE EL ID DE   TERCERO Y ES LLAVE FORANEA DE LA TABLA TERCERO.TERCERO'
COMMENT ON COLUMN "RECARGA"."ESRC_ID" IS 'CAMPO CONTIENE EL ID DE   ESTADO DE LA RECARGA   Y ES LLAVE FORANEA DE LA TABLA RECARGA.ESTADORECARGA'
COMMENT ON COLUMN "RECARGA"."RECA_VALOR" IS 'CAMPO ALMACENA EL VALOR POR EL CUAL FUE REALIZADA LA RECARGA '
COMMENT ON COLUMN "RECARGA"."RECA_FECHATRANSACCION" IS 'CAMPO ALMACENA LA FECHA EN LA CUAL FUE REALIZADA LA RECARGA '
COMMENT ON COLUMN "RECARGA"."RECA_RESPUESTA" IS 'CAMPO ALMACENA LA RESPUESTA DEL OPERADOR PARA LA RECARGA SEA EFECTIVA O NO'
COMMENT ON COLUMN "RECARGA"."USUA_ID" IS 'CAMPO CONTIENE EL ID DE USUARIO NO TIENE RELACION DIRECTA CON USUARIO.USUARIO PERO TOMA LA INFORMACION DE LA TABLA '
COMMENT ON COLUMN "RECARGA"."OPER_ID" IS 'CAMPO CONTIENE EL ID DEL OPERADOR '
COMMENT ON COLUMN "RECARGA"."RECA_NUMERO" IS 'CAMPO ALMACENA EL NUMERO TELEFONICO AL CUAL SE REALIZO LA RECARGA '
COMMENT ON COLUMN "RECARGA"."RECA_AUTORIZACION" IS 'SI LA RECARGA ES EFECTIVA OPERADOR ENVIA NUMERO DE AUTORIZACION ESTE CAMPO ALMACENA ESE NUMERO '
COMMENT ON COLUMN "RECARGA"."RECA_REGISTRADOPOR" IS 'CAMPO CONTIENE EL ID DEL USUARIO QUE REALIZO EL REGISTRO'
COMMENT ON COLUMN "RECARGA"."RECA_FECHAREGISTRO" IS 'CAMPO CONTIENE FECHA Y HORA DE GENERACION DEL REGISTRO'
CREATE TABLE "OPERADOR"."OPERADOR"
     "OPER_ID" Integer NOT NULL DEFAULT SERIAL (5),
     "OPER_DESCRIPCION" Varchar (50) ASCII,
     "OPER_ESTADO" Varchar (1) ASCII,
     "OPER_REGISTRADOPOR" Integer,
     "OPER_FECHAREGISTRO" Timestamp,
     "TERC_ID" Integer,
     PRIMARY KEY("OPER_ID"),
     CONSTRAINT "OPER_ESTADO_CK" CHECK     "OPER_ESTADO " IN ('0','1'),
     FOREIGN KEY "TERC_OPER_FK"     ("TERC_ID") REFERENCES "CLIENTE"."TERCERO" ("TERC_ID") ON DELETE RESTRICT
COMMENT ON TABLE "OPERADOR" IS 'TABLA CONTIENE LA DESCRIPCION DE LOS OPERADORES '
COMMENT ON COLUMN "OPERADOR"."OPER_ID" IS 'LLAVE PRIMARIA DE LA TABLA OPERADOR.OPERADOR'
COMMENT ON COLUMN "OPERADOR"."OPER_DESCRIPCION" IS 'CAMPO CONTIENE EL NOMBRE O DESCRIPCION DEL OPERADOR'
COMMENT ON COLUMN "OPERADOR"."OPER_ESTADO" IS 'CAMPO CONTIENE EL ESTADO DEL OPERADOR 1-ACTIVO/0-INACTIVO '
COMMENT ON COLUMN "OPERADOR"."OPER_REGISTRADOPOR" IS 'CAMPO CONTIENE EL ID DEL USUARIO QUE REALIZO EL REGISTRO'
COMMENT ON COLUMN "OPERADOR"."OPER_FECHAREGISTRO" IS 'CAMPO CONTIENE FECHA Y HORA DE GENERACION DEL REGISTRO'
i try to reproduce th problem but is not possible. and yesterday appear that message
2008-11-18 10:09:53    31 ERR     5 Join     violation of internal data structure
2008-11-18 10:11:14    34 ERR 51080 SYSERROR -9045 BD Root check
2008-11-18 10:11:35    33 ERR 51080 SYSERROR -9045 BD Root check
2008-11-18 10:26:06    32 ERR 51080 SYSERROR -9211 KB Stack type illegal
2008-11-18 10:26:06    32 ERR     5 Join     violation of internal data structure
2008-11-18 10:39:11    31 ERR 51080 SYSERROR -9045 BD Root check
and in this time is the last time that they appear, just now.
thanks for your time

HT1148 Error en el App Store. Vuelve a intentarlo más tarde. (2)

i get the above message when trying to update apps with the app store on mac.
any help?
Regards

Desgraciadamente es un error super genérico, así que no hay mucho que se pueda sugerir a menos que uno tenga la computadora adelante. Va a sonar medio redundante... pero probaste esperar un par de horas (o días) a ver si funciona? A veces los problemas están del lado del AppStore.
Otra cosa: cuántas actualizaciones hay disponibles? Podés probar una actualización a la vez, en caso de que una de ellas te esté dando problemas y trabando las otras.

Ola amigos como posso atualizar a placa de video

Ola amigos como posso atualizar a placa de video do meu xserve 2008 pci 16x de forma que eu possa ver o boot na hora que eu ligo e possa ouvir som pois comprei ele para minha casa para usar como desktop

Olá,
Verifique se o consumo diminui com a aceleração de hardware desabilitada.
O problema que você descreve parece ser resultado de conflitos com a aceleração dos gráficos através do hardware. Experimente desativar essa opção no Firefox.
'''Importante:''' Talvez seja necessário reiniciar o Firefox, portando, salve todo o trabalho que estiver fazendo em seu navegador antes de seguir os próximos passos:
* Clique no botão laranja '''Firefox''' acima ao lado esquerdo, e selecione Preferências
** Se não houver um botão laranja '''Firefox''', selecione Ferramentas > Preferências.
* Na janela de opções selecione o ícone de '''Avançado''' e em seguida clique na aba '''Geral'''
* Nas opções exibidas, desmarque a opção ''Quando disponível, utilizar a aceleração por hardware''.
* Reinicie o Firefox.
Além disso, por favor verifique se existem atualizações do driver Gráfico de seu computador. O seguinte artigo explica como atualizar os drivers:
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
O seguinte artigo contém mais informações sobre problemas na aceleração por hardware:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
<hr>
De uma olhada nesta sessão também:
*[https://support.mozilla.org/pt-BR/products/firefox/fix-problems/slowness-or-hanging O Firefox está lento ou deixa de trabalhar]
Verifique se as configurações mínimas estão próximas da capacidade da sua maquina:
*http://www.mozilla.org/en-US/firefox/28.0/system-requirements/
Tente atualizar a sua versão as vezes o problema pode ter sido resolvido na versão seguinte:
*[https://support.mozilla.org/kb/update-firefox-latest-version Atualizar o Firefox]
Espero que essas informações sejam úteis. Por favor nos informe se isso resolve seu problema.

¿Cómo elimino marcadores en un dispositivo y que Firefox Sync los elimine en mis otros dispositivos?

Tengo tres dispositivos sincronizados con Firefox Sync. Cuando elimino marcadores desde una de mis computadoras, esos marcadores no se eliminan en los otros dispositivos.
Además, cuando reinicio la computadora desde donde eliminé los marcadores, Firefox Sync vuelve a sincronizar la computadora y reestablece los marcadores que eliminé.
Necesito eliminar marcadores y que la eliminación se sincronice.

Algo esta interfiriendo con la sincronización, por lo cual impide nuevos cambios y vuelve a la configuración de tus dispositivos. '''Intenta iniciar Firefox en el Modo seguro''' para ver si se soluciona el problema. [[Troubleshoot Firefox issues using Safe Mode|El Modo seguro de Firefox]] te permite solucionar algunos problemas, ya que deshabilita temporalmente la aceleración de hardware, restablece algunas configuraciones y desactiva los complementos (extensiones y temas).
Si tienes abierto Firefox, puedes reiniciarlo en el Modo seguro a través del menú Ayuda:
*En la versión 29.0 o superiores de Firefox, haz clic en el botón de menú [[Image:New Fx Menu]], en Ayuda [[Image:Help-29]] y selecciona la opción ''Reiniciar con los complementos desactivados''.
*En las versiones anteriores de Firefox, en la parte superior izquierda de la ventana de Firefox, haz clic en el botón de Firefox y en ''Ayuda'' (o, si no tienes el botón de Firefox, haz clic en ''Ayuda'' en la barra de menú) y, por último, en ''Reiniciar con los complementos desactivados''.
Si Firefox sigue sin ejecutarse, puedes iniciarlo en Modo seguro haciendo lo siguiente:
* En Windows: Mantén presionada la tecla '''Shift''' cuando selecciones el acceso directo de Firefox en el escritorio o en el menú Inicio.
* En Mac: Mantén presionada la tecla '''option''' al iniciar Firefox.
* En Linux: Cierra Firefox, ve a Terminal y ejecuta ''firefox -safe-mode'' <br>(puede que tengas que especificar la ruta donde se encuentra Firefox; por ejemplo /usr/lib/firefox)
Cuando aparezca la ventana de Firefox en Modo seguro, selecciona "Iniciar en Modo seguro".
:[[Image:Safe Mode Fx 15 - Win]]
''Para salir de Firefox en Modo seguro solo tienes que cerrar Firefox y esperar unos segundos antes de volver a abrirlo en el modo normal.''
* Una vez dentro, verifica que tus otros dispositivos estén apagados o desactivados. Con Sync activado en tu computadora principal ve al menú de Firefox y haz click en tu sesión activa, te llevará a la configuración de Sync, comprueba que las opciones deseadas estén tildadas.
* Haz un cambio cualquiera en los marcadores, luego presiona el botón Sync (dos flechas rotando), si no se encuentran, abre de nuevo el menú y esta vez haz click en "Personalizar", arrastra las flechas hasta un lugar cualquiera dentro de la barra de herramientas.
* Para confirmar la sincronización, dirígete a la barra de direcciones y escribe '''about:config''', lee y acepta la advertencia. En el cuadro de búsqueda utiliza el comando '''services.sync.lastSync''', verifica que la fecha y hora marcadas sean correctas al momento de realizar el cambio.
* Reinicia Firefox y sigue utilizando el modo seguro, comprueba que Sync no restablece los marcadores eliminados.

Empleado diario topado en mes de Febrero 2012

Hola, durante la nómina de Febrero del 2012, para un empleado topado diario , la /342 le sale 3153,75 y la /343 le sale 3262,50. He comprobado para el mes de Enero y ambas cc_nóminas salen iguales , 3262,50 , en cambio para Febrero la función ESV00 esta devolviendo esos valores, con las mismas retribuciones , sin IT y sin horas extras...
Alguien ha tenido el mismo problema ? Este comportamiento creo que no es el adecuado pero me gustaría saber si alguien esta teniendo el mismo problema.
Gracias.

Buenas tardes Alberto,
Para aplicar la nota no os hará falta subir de nivel de parches. El requerido es el 59 y ya tenéis el 69 por lo que dices.
Por otro lado, en caso de querer aplicar el CLC que se libere en febrero, si se necesitaría el último support package de sincronización, que en vuestro caso sería el SP 76.
Espero haber aclarado la duda.
Saludos

Atualmemete ao usar o Mozila o PC desliga o monitor e o lede da CPU continua acessa e depois reinicia. So acontece no mozila

Ao iniciar o navegador mozila após alguns minutos o PC desliga o monitor e a CPU continua com o lede aceso e após alguns segundos reinicia o pc informando que o windows foi desligado inocorretamente. Utilizo o Windows 7. estava usando o chorme aconteceu isso dai troqiei pro mozila que estava funcionando perfeito porem ultimamanete apareceu esse problema, ni Internete Explore funcional normalmente sem travamentos.

Segui suas orientações e desativei a aceleração de hardware e em seguida verifiquei se havia atualização de drive e nenhum foi encontrado, tanto no Update quanto no fabricante. Antes em menos de 5 minutos ocorria o problema, e já faz 1 hora que estou com o Mozilla aberto navegando e o problemas não mais voltou ocorrer. Acredito ter solucionado com sua orientação. Caso persista voltarei a te comunicar. Muito obrigado pela sua ajuda foi de grande valia. Vc é o cara....... Abraços e vou continuar a testar e volto a comunicar a solução definitiva e seu êxito.

Depuracion en almacen

Buenoa dias.
Alguein sabe si hay manera de depurar datos en SAP especificaente en Invenario.
Lo que pasa es que en Articulos de Almacen estan dados de alta varios articulos con diferentes nombres ejemplo
373 AL-FER0211 MULTIMETRO
561 AL-HER0081 MULTIMETRO
Estos dos son lo mismo pero se dieron de alta con dos codigos deiferentes y a la hora de verificar el inventario fisicamente es donde surge el problema.
Alguein tiene alguna idea para que esto solo sea un solo articulo.

Hola...
Se supone que si son el mismo producto, entonces debes consolidar el stock en uno de los 2. En otras palabras uno de los productos ha sido incorrectamente creado, sin embargo, el tema es que si ambos han tenido stock, probablemente no podrás eliminar ninguno de los 2 códigos.
Para traspasar el stock tendrías que realizar una salida de mercaderías por módulo inventario del articulo código A y luego una entrada de mercaderías por módulo inventario del artículo código B. Luego como no se podría eliminar el producto del código erróneo, lo que podrías hacer sería bloquear el mismo.
Saludos Cordiales,

Re: overseas cellular forwarding

The responder didn't exactly answer the question.
The original poster's problem was that when he has his US Skype Number forwarded to his Peruvian Cell Phone, the cost is "beyond words."
For me it costs about $1.00 per minute to forward my US Skype Number's calls to my Peruvian Cell PHone.
I will ask the original poster's question again. Is there a cheaper way to achieve this?
Perhaps, by purchasing one of the plans listed on this page? http://www.skype.com/intl/en-us/prices/pay-monthly/?intcmp=CS-Upsell-FA1214-2#PE
Please let me know... $39.99 for 400 minutes is MUCH better than $1 per minute... however this is a plan for calling from Skype to A peruvian cell. Does it still apply if you are having your Skype number FORWARDED to a Peruvian Cell?
thank you

jeremyhillpot wrote:
The responder didn't exactly answer the question.
The original poster's problem was that when he has his US Skype Number forwarded to his Peruvian Cell Phone, the cost is "beyond words."
For me it costs about $1.00 per minute to forward my US Skype Number's calls to my Peruvian Cell PHone.
I will ask the original poster's question again. Is there a cheaper way to achieve this?
Perhaps, by purchasing one of the plans listed on this page? http://www.skype.com/intl/en-us/prices/pay-monthly/?intcmp=CS-Upsell-FA1214-2#PE
Please let me know... $39.99 for 400 minutes is MUCH better than $1 per minute... however this is a plan for calling from Skype to A peruvian cell. Does it still apply if you are having your Skype number FORWARDED to a Peruvian Cell?
thank you
Yes, this would apply to both calls forwarded from your Skype account or if you call telephones from your Skype account. There is no difference between the two types of calls in terms of how Skype handles the calls out to telephones.
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

Difference in performance of SBA between Windows and Unix

Hi,
I am using a MSF routine which uses SBA to recursively search a sysbld suprerblock and its children to find a specific type block (in this case a ucb). It works fine on both Windows and Solaris Xmath. However, for very large models, there is a huge performance difference. I ran the algorithm on a model containing around 1000 superblock and 10000 blocks. Under Solaris (7.1.5) it takes around 30 seconds while under Windows XP (7.1.6) it takes more than 8 minutes.
Any thoughts on the reason behind this difference.
Thanks
Farshid
P.S. The MSF file is attached
Attachments:
finducb.zip ‏1 KB

I'm aware I may get some flack for this statement.^^^Some. <grin>
I'll give you the counter-argument. Those Unix shops with incredibly stable environments? Have you done a count of actually used applications? The ones that mimic the business' current needs? The ones that reflect the business', uh, business? Perhaps it's just the clients I interact with, but those often have a mixture of "dead" apps in with the live ones. I rarely see that with Windows and yes, the app count is sometimes crazy high on the Unix side -- certainly beyond what EAS can comfortably navigate (I was on a 9.2 environment once that had 200+ apps -- Shared Services was essentially broken at that site, but so was 9.2 in general.)
Anyway, I've observed that IT tends not to do a terribly good job of producing flexible analytical applications. They are very good at stability, sustainability, security, and all sorts of other things Essbase (and other, especially transactional) environments must have. Until they become fossilized in their SOPs, their policies, and their requirements. At which point a different transformational technology that the business can control pops up -- heard of TM/1 lately? I am super curious (for all kinds of obvious reasons) to see where my beloved Essbase ends up in a few years.
I'm not coming down on either side, just saying that I've seen this play out multiple times since the mid-1980s. While both sides have their merits, at the end of the day, if a super well maintained environment is just a monument to IT's ego, it's worthless. And yes, I have seen Windows environments that are just that.
Regards,
Cameron Lackpour
Edited by: CL on Jul 12, 2011 9:54 AM
Smiley faces no longer work. Why oh why oh why?

Audiocodes m800 SBA will not update Replication

Hello everyone
I have a M800 Audiocodes SBA updated to Lync 2013 version 1.1.12.0 and it seems that I can not get replication to work
I have tried invoke-csmanagementreplication so many time I know that's not it. I can access the share data files on the host Front End so I know it is not a FW or Port issue,
I have tried to take ownership of the XDS-Replica directory and deleted it and ran repair on Lync 2013 Core Components. I have done a export-csconfiguration on the Front end and Import-csconfiguration -local -verbose -filename .... and that did not
snap it back into place.
Can anyone think of something else I can try. the SBA is quite remote so going to the site is not ideal to possibly put the lync 2013 usb back in a start from scratch. Oh to add to that I have removed all users and dial plans and removed it from
the topology and re added it and removed it from the domain and added it . I have other SBA's running from the same host FE so I know it works for others.
If a start from scratch solution is the only way is there a way to perform this remotely ?
thanks

I just tried the fabric solution. no joy.
All the processes start frin I am just not getting updates
UpToDate : True
ReplicaFqdn : LCAVLT1.ledcor.net
LastStatusReport : 7/14/2014 10:00:05 AM
LastUpdateCreation : 7/14/2014 10:00:02 AM
ProductVersion : 5.0.8308.556
UpToDate : True
ReplicaFqdn : LMAVLF1.ledcor.net
LastStatusReport : 7/14/2014 10:00:22 AM
LastUpdateCreation : 7/14/2014 10:00:02 AM
ProductVersion : 5.0.8308.556
UpToDate : True
ReplicaFqdn : LMAVLT1.ledcor.net
LastStatusReport : 7/14/2014 10:00:05 AM
LastUpdateCreation : 7/14/2014 10:00:02 AM
ProductVersion : 5.0.8308.556
UpToDate : False
ReplicaFqdn : NKUPLA1.ledcor.net
LastStatusReport : 6/26/2014 3:32:26 PM
LastUpdateCreation : 7/14/2014 10:00:02 AM
ProductVersion : 5.0.8308.0
I am going to try to run the CU but I am confused a little on the sql database locations

I need to add an attachment to a pdf form from the SBA it is OIC_TABS_NGPC_nl.pdf

I need to add an attachment to a pdf form from the SBA it is OIC_TABS_NGPC_nl.pdf

Do the people who made the form SAY you can add an attachment? If not, do not consider it. The form will probably be read by a computer, so it will only look in the form fields provided.

Adobe Reader XI not working with SBA forms in FF and Chrome

So I am having this issue when I try to open an SBA form in chrome or FF where it will not open first try and I have to refresh the page untill it opens. IE on the other hand does not give me this problem, but I don't want to recommend my custoemrs use IE.
As a side note SBA forms have to be vied with Adobe so I have already disable Chromes pdf viewer and all other pdf viewers except adobe.
Please help!
-edit
Adobe Read XI version 11.0.06
Chrome = 32.0.1700.107 m
IE = 11
FF = 26. currently updating will check with new version

I do not use Chrome, so I can't advise you about that.
But Firefox also uses its own PDF viewer, not the Adobe PDF plugin. See http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

SBA 8.0 (Hor) to SBA 8.0 (Ver) Industry Application Post Upgrade Problem!

Similar Messages

Maybe you are looking for