SBH 52 headphones with microphone

I used this device and everythink works fine except one thing. When i connect my headphones with microphone (Xiaomi Piston 2.0) , then is using SBH52 build-in microphone instead of that which is in my headphones. I tried googling this problem, but without any success. Had i something wrong configured, or this device cant handle a external microphone? Thanks for replies...
Solved!
Go to Solution.

Since this behaviour appear while using different headphones, I suggest that you have your SBH52 examined and fixed by a technician at an authorized service center. You can contact your local support team for further information about nearest service center and/or how to proceed with this in the best possible way:
http://support.sonymobile.com/global-en/contactUs/
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

TS2634 My iphone headphones with microphone don't work. Any suggestions?

My iphone headphones with microphone have stopped working, and they are under warranty. I am having difficulty getting an answer about what to do from Apple - just got off the phone with them, and they emailed me an article that was of no help at all. Any suggestions as to how I can resolve this issue would be greatly appreciated.

All, I have this same problem and has just solved it on my iPhone.
I read up on the problem at att.com/esupport and arrived at the link below:
https://www.att.com/esupport/article.jsp?sid=KB413495#fbid=ahhj00ALH45
"If your email address is linked to your AT&T Access ID, changing your AT&T Access ID password automatically changes your email password to the same password.
If you use your email address as your AT&T Access ID, changing your email password automatically changes your AT&T Access ID password to the same password."
I have a ATT Uverse (for my internet access) acct and could not log on so I requested for password reset. They sent me temp password and I had to change my password to my Uverse acct. I use my att.net email as the log on for my Uverse acct. Per att instructions above, my Uverse acct is linked to my att.net email, so now my att.net email pw has been changed to the pw for my Uverse acct.
Accordingly, go into your iPhone Settings, Mail, Contacts, Calendars, choose your Att.net mail acct and change your password. In my case I changed it to the new pw I had set up for my Uverse acct and it works.
Before doing this, I had also added new servers as shown below. The way I see it because your iPhone will try in succession to log on to each server from top to bottom of the list, it's best to add all the mail servers.
smtp.mail.yahoo.com
smtp.mail.att.net
outbound.att.net
Please note that I did not have to add "imap.mail.att.net" and my Att.net mail on my iPhone still works.
Hope this helps.

Ipod nano 6th: no voice recorder despite headphones with microphone

Hi there!
I have got an ipod nano 6th that is working ok, but when I use my headset with microphone, the voice recorder app still does not show up. It can't be the headphones as 1) I have tried several ones with microphones on the nano and none makes the app appear, 2) the very same headphones manage to trigger appearence of voice recorder in other ipods. So it must me my ipod nano. Any ideas, suggestions, experiences? BTW: it used to work in the past on this nano...so no idea why it stopped.
Thanks!
Bettina

Hello Bettina,
I would be concerned too if the Voice Memos app stopped appearing on my iPod nano. I found some steps I recommend to troubleshoot an issue like this.
First, I recommend verifying that the Voice Memos icon is set to be visible on your iPod nano. If you go to Settings>General>Home Screen, make sure you see the switch set to On next to Voice Memos. You can find more information about this on page 15 in the iPod nano (6th generation) User Guide.
If you are still not able to see the Voice Memo icon after verifying that, I recommend resetting your iPod nano (from page 52 of the iPod nano User Guide):
Reset iPod nano:
First, make sure iPod nano is charged. Then press the Sleep/Wake button and the Volume Down button for 6 seconds, until the Apple logo appears.
The final step would be to restore your iPod nano if Voice Memos is still not appearing. You can find steps to do this on page 56 of the User Guide.
You can find the iPod nano (6th generation) User Guide here:
iPod nano (6th generation) User Guide
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
Thank you for using Apple Support Communities.
Best,
Sheila M.

Headphones with microphones, your buying advise.

I need to but 25 pairs of headphones with a microphone attached for a school music room.
The budget is £20 a headset, and they will be using them for garageband, I know £20 doesn't buy the best but there must be something good for that price.
I would like to hear other users advice and recommendations. on things to look out for and any good products.
I would prefer to have a 3mm jack, instead of having a converter from big to small, as they get damaged quite easily.
many thanks in advance

Are these headphones & microphones for G5 iMacs? Your post does not make this clear.
If not, then you will do much better re-posting over in one of the GarageBand Forums and/or cross post in the Forum(s) of whichever mac model(s) you have in your music room.
PS Have you checked out the online & your local Apple Store? You need to check out the Teachers Discount (Education).

Looking to buy headphones with microphone to work with my MacBookAir - any ideas

I am reading that this can be a problem.
Is there a set that is known to work or do I need some kind of jack ?
Wanting to use Rosetta Stone on MacBookAir.
Cheers.

Welcome to Apple Discussions.
Any USB voice qualtiy headset microphone will work. Where are you reading that this is a problem?

How do I use a headset with separate headphone and microphone jacks on my macbook air

I have a new macbook air and a headset with separate headphone and microphone jacks. Where (how) do I plug in the microphone jack into the computer?

This adapter and sufficient length VGA cable is all you need.

How can I use the microphone on the iPhone 5 headphones with my ASUS Laptop?

ASUS Vivobook X202E
Windows 8
Headphone jack is both headphone and microphone jack
How can I manage to use the microphone on my Apple iPhone 5 headphones with my ASUS laptop?
When I plug in the headphones, only the headphones work, the microphone does nothing.
Anyone find a solution.
Thank you in advance for any and all help.

I doubt that the Apple headset is compatible with your laptop. Apple devices have an extra "ring" in the plug and jack for connecting the control buttons. Your laptop does not recognize the extra contact.

How to setup headphone with in-build microphone in hp 15 r-022tx

hey,
i have hp 15 r-022TX laptop and in this laptop as you know there is only 1 3.5 mm jack slot for headphone.
i want to use headphone with in-build microphone (philips SHM1900) and for that i purchased a 2 in 1 jack to connect to laptop
jack details are here ( "http://www.flipkart.com/callmate-asc-iphone-audio-split-data-cable/p/itmdh9nfhfjz35fc?pid=ACCDDRSYRH... )
but using this jack still laptop is using its in-build microphone not the headphone's mic.
headphone is working with the jack but i cant use its mic.
i am using windows 7 ultimate(64 bit).
can anyone help me out.
thanks.
This question was solved.
View Solution.

HI @Rajatsharma_yam ,
Thank you for your inquiry, I will do my best to assist you.
I grasp that when you connect your combo headphones and mic the mic portion is not working.
Have you done all your Windows updates?
Have you ran the HP Support Assistant to ensure you have the latest HP drivers installed.
If you look at the physical connector how may bands do you see on it? You should have 3 or 4 bands.
Are you sure they are connected all the way into the headset and the port on the notebook.
When you have the combo headset connected go to control panel/sound and open the Window.
Click on the recording tab, is the mic listed? You should be able to select and configure from this Window.
Here is a link to Resolving headphones and headset problems (Windows 8) that may also be of aid.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How can I plug in my headphones with a microphone built-in to my macbook pro?

I have some new headphones with a built in mic that I want to use to record commentary and also hear out of for making youtube videos. The headphones plug has 3 rings on it, I'm pretty sure this means 4 conductive sections, 2 for each speaker, 1 for the mic, and 1 for the play/pause button on the mic. these are not apple headphones, they are sony. I dont really know how to split the headphones into both my microphone and headphones jack on my laptop. Can someone please help me out? Thanks.

Easy, go to the preferences (or properties) in iTunes. Go to the advanced tab and check the Prevent iPods.... from syncing automatically.

Longer USB cable & Headphones with boom microphone

Using iPhone 3G
Question 1) the USB cord supplied to run from electrical adapter to the phone is too short. Does the electrical adapter work with any standard USB 2.0 cable, so I could buy a longer cable anywhere? I don't see a longer cable offered by Apple.
Question 2) I would like a serious headphone for business use. That means a combination headphone with a boom microphone (hopefully with a noise cancelling mic). I don't see any from apple. Does anybody know of one that works well? Standard ones do not work since that are not set up for the stereo jack on the iPhone 3G. I have seen some adapters (go from iPhone jack to standard used by telephone head sets) but they have not gotten good reviews.
Thanks
Bob

I absolutely agree that a longer cable is necessary because my front USB port is low down at the bottom of my computer, which itself is located a few inches above the floor. So, yes, to see the Micro while I'm downloading or checking to see if it's docked, does require me to bend down near the floor to see what's going on. I have resorted to using my USB camera cable, which is long and conveniently located on my desk!

Can you get the plan headphones with a remote(like you do when you first buy a smaller gb ipod)? if so how much do they rage and where can you order then?

i've been having a hard time just finding a good/not over 30$ headphones that will go with cause the the headphones i
got are dead and not working no longer and you know parents or anyone these's days that are not willing to go
buy something that isnt rescearched yet! and i even want a good pair but not have to spend 70$ on them and to
know they might stop working in the next month/year or two!!

That's a 3rd gen iPod shuffle, so do not get the new Apple EarPod headphones. Based on posts I've read here, they do not work with the 3rd gen shuffle.
You can still find the old version of the Apple headphones with remote, at online stores like Amazon. They are like the one that came with your shuffle, except they usually have a microphone on the remote nub.
Alternately, you can use something like this adapter with remote controls
http://www.amazon.com/iLuv-iEA15BLK-3rd-Party-Headphone-VoiceOver/dp/B002RL9WDQ
and connect ANY headphones.

Bluetooth headphone with MIC

I'm considering to purchase a Bluetooth headphone with MIC for my iPad mini. If I connect, will the headphone MIC take over the iPad's builtin microphone?

Shardsofmetal wrote:
However, it sounds like you're saying that the headphones will work but the microphone won't, right? Thanks
mainly true and most likely yeah! The sound will come through the headsets but the microphone will not be able to function at all.... The bluetooth on the iPod touch is very limited to what function it can perform, like Meg St. Clair mentioned is for stereo Headphone; wireless speakers and games. Things like headsets or anything(like microphones)that might be used as with Bluetooth is not supported. The only way you can get a microphone to work is if it's plugged in on the headphone Jack at the bottom of the iPod touch. Sorry that you had to hear that, you were probably hoping that you could use the Bluetooth with that microphone.....
Message was edited by: John-macOwner

Y410p Front headphone and microphone jacks not working after repair

I recently (last month) sent my IdeaPad Y410p in to Lenovo for repairs due to the laptop not turning on, or repeatedly restarting at the BIOS screen. The laptop was repaired by Lenovo (they replaced the motherboard), and returned it to me. The laptop has worked great sincce then, except that the two USB ports on the right side and the headphone and microphone jacks do not work. I have reinstalled the audio drivers, twice, but have not reinstalled the chipset drivers at all, as I don't want to screw around with those untiol I no more about what I should do. Any help would be appreciated.

Hi Talonek, welcome to the forums,
the problem you are experiencing is probably due to the cable connecting the ports on the right side, front of system, to the mainboard unfortunately not being connected or connected properly. Please see pdf page 52 of the system's Hardware Maintenance Manual.
I've never taken an Y410p apart, but having looked at the manual the cable connection may well be accessible to check / fix by removing the hard drive. Another alternative would be to call service and ask them to do this for you.

Problems hooking up a headphones with microph

I have a audigy 2 zs card,I am usuing the digital out connector with spdif enabled,i am trying to hook up a headphone microphone combo,it has to jacks on it a pink and a black,i am not sure what ports to put it in.when i tried to plug it in with the pink in the mic port it no problems but when i put the black in another port (not sure where it should go)the computer restarts with no sound. Thanks

I'll assume that black is the headphone plug and pink is the microphone plug on your headset. The firewire port is on one end of the rear panel of the Audigy 2 ZS. The third /8" jack away from the firewire is LineOut, which is for speakers or headphones. So put your black plug in there. The MicIn is the fourth jack away from the firewire. Put the pink plug in there. If you play a stereo source and can't hear anything out of the headphones with this arrangement (assuming you have the correct Creative Surround Mixer and Speaker Setup settings), try swapping the headset plugs.

Can I use headphones with the two adapter plugs on a Mac Pro

I have headphones with two plugs. I don't know where to plug them in. There are two portsin the back and before I open this package I need to know if those are the appropriate ports, since they are the only two side by side ports on the tower. I have another set of headphones that have the two plugs, but upon trying them, there was no sound regardless of how i adjusted things in the 'sound' in system preferences.
Help with this is greatly appreciated.

I'm guessing that the headset has a microphone as well as earphones, yes? If so, there is no microphone input on your Mac Pro, only a line level input. So you can use the headphones portion as is, but the mic will require additional hardware.
The ports will be designated in the user guide for your model of Mac Pro:
http://support.apple.com/manuals/#macpro
but if you look at the various ports on the back of the MP carefully, you'll find one marked with a tiny "speaker" icon. That's the line-level output to which you can connect some headphones. The other port is a line-level input. If you want to use a microphone, you'll need either a line-level mic or an amplifier device of some sort. Griffin's iMic is a commonly-recommended converter.
Regards.

SBH 52 headphones with microphone

Similar Messages

Maybe you are looking for