SBH 52 Microphone only working with headphones attached

Hi All,
One of the main reasons I got the SBH52 is so I can use it as a headset, however, recently the microphone stopped working unless I have a headphone connected or I use the SBH52 speaker instead of headset. Is anyone facing the same issue, or anyone managed to resolve it ??
Thanks

@MoathDali
Contact your local Xperia Care ASAP
http://support.sonymobile.com/global-en/contactUs/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Similar Messages

  • Siri on Iphone 5 only works with headphones

    I have an iPhone 5 64 gig gsm, factory unlocked phone.  Siri only works with headphones or when you use raise to speak.  When I attempt to use it without it doesn't seem to hear me.  I read a few threads on the subject and it seems this is a known issue.  Most of the time the threads end when someone finds a solution without the solution being disclosed.  Apps like Soundhound and Shazam seem to work fine so it appears the issue is software related.  I have notice Apple texting does not work with the mic either.  This is a very strange problem and I would appreciate any help you can give me as my iPhone is no longer in warranty.

    Hey W. Harrison Stone,
    Thanks for the question. It sounds like you may have a hardware issue with one of your microphones on the iPhone (three in total). To help isolate the issue to software or hardware, it may be best to back up and restore your iPhone to factory settings. However, before doing so let's first try a simple restart/reset of your device:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/HT1430
    If the issue persists after a restart/reset, follow the instructions in this resource to backup and restore your iPhone:
    iOS: How to back up your data and set up your device as a new device
    http://support.apple.com/kb/HT4137
    After erasing and setting up as a new device, your device is now in a factory configuration. Test to determine if erasing and setting up as a new device resolved the issue. Content on the device may have caused unexpected behavior.
    If the issue is still present, you may want to contact Apple Support.
    Thanks,
    Matt M.

  • My sound on my MacBook Pro laptop only works with headphones.  How do I get the internal speakers to work?

    My sound will only work when I plug in headphones in the jack.  When I take them out, the volume button is on mute.  When I go into the sound preference it says Digital Out for the output.  Sometimes I get a red light when the headphone jack is at.  I have tried blowing in it and have put the jack in and taken it out numerous times to see if it will reset.  Nothing.  Any suggestions on what to do next?

    Go step by step and test.
    1.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    2. Reset PRAM.  http://support.apple.com/kb/PH14222
        Do this twice
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:     "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • Why the update 10.6.7 kills my audio, only works with headphones...!!!

    Yesterday i've installed the 10.6.7 update of Mac Osx and my audio has gone. The only way that i can hear a thing it's with headphones...

    Is there a red light in your headphone port? There is a little switch in there that sometimes gets stuck. Try plugging your headphones, or some different headphones in under it clears up.

  • HT4623 My iPad 2 audio only works with headphones and orientation does not work at all

    My iPad 2 volume button does not work with the integrated speakers of my iPad, once a headphone is connected to the jack output of my iPad the OSD volume displays fine and works to the external headphone but once the headphone jack is removed, there is no more a volume bar and the side volume buttons don't work at all, this has affected the screen orientation as well, screen does not orientate  as well,
    Please help

    If you deleted files from the operating system, you wrecked your installation and the first thing you need to do is either restore those files from a backup or reinstall the OS. Doing that is never the solution to any problem. Back up all data before making any changes.

  • Audio Only Works With Headphones

    So here is a weird one, when I'm in a video or audio chat, I can only hear the other person if I"m wearing headphones. I can hear everything right up until the chat begins even the vwoom sound as the other person accepts the invitation. If I put my ear next to the "right" internal speaker, I can barely hear someone talking but as soon I plug my head phones in I can hear perfectly. What's the story here?

    Hi,
    I would try the "Run the Combo" Trick.
    Download and Install the Combo version of 10.5.6 over the top of what you have.
    This often correct issues like this that are hard to find.
    If this does not work I would then delete com.apple.ichat.plist
    This holds the camera and Mic info and the volume settings (But normally the Speech volume of the Alerts in iChat Preferences > Alerts)
    However deleting this is fairly destructive as things go for iChat.
    You lose any setting you have made in the Preferences :- Font choice, Font Colour, Balloon/Text IM background colour, Saved Transripts, tabbed Chats, Alerts you have set other than defaults, Menu Bar Icon (it's sub sections about Logging off fully on Quit and changing to Available on Launch)
    You also Lose Saved Status Messages.
    I would use this as a Last Resort.
    8:16 PM Tuesday; February 17, 2009

  • Cannot get internal speakers to work. Only works with headphones or external speakers?????

    All of a sudden my MacBook Pro internal speakers are not working. The status bar at the top of the screen shows everything bold and in black print but now the speaker volume symbol shows just the gray color and will not allow me to adjust the volume. However, when I plug in headphones or external speakers the symbol becomes bold and black the way it should and everything works just fine??? How do I correct this?

    Go step by step and test.
    1.Plug in and  remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    2. Reset PRAM.  http://support.apple.com/kb/PH14222
        Do this twice
    3. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:     "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • My sound says I have headphones plugged into my iPad, when I don't. Also sound only works with headphones plugged in

    I have tried turning my iPad on and off (3 times!!!), I have tried cleaning the headphone thing (where it's plugged in), and I have tried plugging in and unplugging my headphones. Please help me I am frustrated

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

  • Speaker not working only works with headphone dock

    I bought iphone 4 in Apr , fisrt its started rebootong every 5 min so I got a replacement , now after a month of use its speaker stop giving output without earphone dock , can anyone help me wihth this problem or again I need to get it replaced , Its really frustrating & surprising with the such big brand like Apple, next time I will think twice to upgrade or buy apple product
    pls help me to fix the speaker output issue

    I know it sounds strange, but it's possible that your headphone jack is jammed.
    There's a small sensor within the headphone jack that tells the iPhone that there are headphones plugged in. It's been a long-running issue with iPhones that sometimes it gets... uh... stuck.
    When it gets stuck, the phone keeps thinking you have headphones plugged in, and keeps routing the sound there, instead of to the speakers.
    The Apple Store recommendation is to plug your headphones in, and then remove them... do it a few times to make sure.
    Give it a try... let me know how it turns out.
    (If that doesn't work... off to the Apple Store!)

  • IdeaCentre B540 Audio only works with headphones

    Hi,
    My sounds has been working fine on my IdeaCentre B540 for the past few months. One day the sound stopped working on my speakers. It still works on my headphones though, can someone please help?
    I'm using Windows 8, and according to the sound options on my control panel my sound device is up to date, the high definition audio device is the default device and its coming up that its working fine?
    I'm not really sure what else to do!

    Hi,
    I would try the "Run the Combo" Trick.
    Download and Install the Combo version of 10.5.6 over the top of what you have.
    This often correct issues like this that are hard to find.
    If this does not work I would then delete com.apple.ichat.plist
    This holds the camera and Mic info and the volume settings (But normally the Speech volume of the Alerts in iChat Preferences > Alerts)
    However deleting this is fairly destructive as things go for iChat.
    You lose any setting you have made in the Preferences :- Font choice, Font Colour, Balloon/Text IM background colour, Saved Transripts, tabbed Chats, Alerts you have set other than defaults, Menu Bar Icon (it's sub sections about Logging off fully on Quit and changing to Available on Launch)
    You also Lose Saved Status Messages.
    I would use this as a Last Resort.
    8:16 PM Tuesday; February 17, 2009

  • IPod audio only works with headphones

    Anybody know how to fix?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself

  • On instagram my sound only work with headphones in how do I fix this?

    How can I fix this

    Hi Luizaxox!
    This article can help you troubleshoot the issue with this app:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Microphone of my iphone is not working when i call anyone nobody can listen but me, its working with headphone but its also working with videocam recording, please help me to solve this probelm.

    microphone of my iphone is not working when i call anyone nobody can listen me its working with headphone. but it is working with videocam recording, please help me to solve this probelm.

    Try this:
    1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
    2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
    3. If the issue persists, Your iPhone need repair.

  • My iPhone 5c sound/speaker only works with the headphones in and when I'm trying to change a ringtone in settings..

    my iPhone 5c sound/speaker only works with the headphones in and when I'm trying to change a ringtone in settings.. why is this?! its not on airplane mode, its not on silent, ive tried turning it on and off, software is up-to-date etc. just no sound for text alerts or when trying to play music/videos. Help!

    same issue as this guy it's a hardware issue
    https://discussions.apple.com/thread/6266690?tstart=0

  • MBPro 17 Intel Core 2 Duo Audio only works with the headphones?

    MBPro 17 Intel Core 2 Duo Audio only works with the headphones?
    There is a red light constantly emitting from the headphone socket?
    I can not listen to sound unless headphones are plugged in - when taken out I get a red light and the volume controls kets seem locked?
    Please help!
    Julian

    Hi Kitty.
    Seems to be quite a popular problem. In another post, I posted the following.
    "The red light is the data signal that is transmitted if you plug in an Optical Audio device such as surround sound speakers. I had the same problem for a short while with my 17' MBP. Sound was working fine from my built in speakers but I plugged in some earphones to listen to something that I did not want the rest of the office to hear and after pulling the hearphones out, the optical signal (red light) was being transmitted. The switch Cessna is referring to is the switch that is triggered inside the port that tells OSX that earphones/optical audio device is plugged in and to shut down power to the built in speakers. When the device is un-plugged from that port, the switch should get triggered again and power up the built in speakers and disable the optical light signal. Perhaps there is the slightest defect on the earphones you are plugging in that are preventing it from triggering the switch when the earphones are un-plugged.
    Try a different sent of earphones to maybe trigger the switch if you are uncomfortable with the paper clip solution."
    That seemed to solve the problem for that user.
    The link to the post is http://discussions.apple.com/thread.jspa?threadID=895286&tstart=30
    Good luck

Maybe you are looking for

  • Not able to input data in query analyzer

    Hi buddies, I am working on IP.I have created a input ready query.For few values of company code there is no transaction data available,but it should show us blank so that I can atleast punch data.I am able to punch data for company codes for which t

  • Problems with iPod touch 5G - Artwork and TV shows don't show up

    I've been having some problems with my recently acquired iPod touch 5G. When I change album art on iTunes for music or videos it either won't change the art on my iPod or no artwork will show up at all (just the default grey music note or TV). When I

  • Javatwain

    Has anyone tried java twain? I don't know why I always get problem when I run an application! Starting application C:\cai\download\robo-sdk\demos\server\sun\robodemo\Fetch.class java.lang.UnsatisfiedLinkError: no javatwain in java.library.path at jav

  • How to fetch the active window details using system service

    I am running one application as a service in windows OS. Its purpose is to fetch the all process name,process id and other details which are running currently by executing the tasklist /v command from Java and save the results in a text file. I can a

  • Adobe Acrobat X on Server 2003 (using remote desktop services)

    Hi guys, I need to purchase a copy of Adobe Acrobat for Windows Server 2003 for use in Microsoft Dynamics GP 2010, as well as everyday Acobat read/write tasks. There will be about 4 or 5 simultaneous users connecting to the server using RDP (via Wind