SBH50 issue with streaming audio (sec white noise)

After some test, with 2 device, and after having resetted the SBH50 as suggested in another thread related to stutter audio, i realize that the issue comes when "multipoint" in sbh50 is activated.
i did some exercise:
- no multipoint activated (only one device: sgs3) music streaming from sgs to sbh works perfectly.
- multipoint acivated
second device not connected: as soon as multipoint is activated sbh starts being disturbed by "white noise" for 1 second and it happens really often, more times during a single song
second device connected: same situation as point 1
i solved not using multipoint.. that is not the right solution
hope for a solution, i got still 20 days before time limit for give it back with no fee, and i wonder to understand if i should buy a BT clip that cost less considering at this point the added values is the little scrren (nice) and nfc (nice but.. after the first pairing i do not need it anymore)
thank you for your support

does this silence in suppport means that there is no solution ?

Similar Messages

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

I am having issues with streaming music from iTunes on my MacBook Pro to my audio system through AirPlay. Works perfectly with my iPod Touch. The AirPlay icon appears irregularly in iTunes and when selected doesn't connect. Running latest IOS software.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
You said:
No, I do not want to "factory reset" my iPod. No I do not wish to do anything crazy long or hard to fix this.
That may be necessary, It is not what you want to do/not do but what is required to resolve your problem.

I have a ipad 1. I seem to be having a lot of connectivity issues. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop.

I seem to be having a lot of connectivity issues my iPad. It takes a long time to load and sometimes will not load a page at all. I seem to be having issues with streaming in that it will play a song and just stop. It seems I have to turn it completely off and restart.
Anyone had these issues?

Settings > General > Reset > Reset network settings

Im having issues with the audio on my phone, I can't hear any audio i.e music or video unless I have the headphone installed.

Im having issues with the audio on my Iphone 4s, I can't hear any audio i.e music or video unless I have the headphone installed. Any clues the problem or how to correct?

1. http://support.google.com/youtube/bin/answer.py?hl=en&answer=58132
2. System Preferences > Flash > Advanced > Delete All
3. Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Quit Safari.
    Restart computer. Relaunch Safari.

Is there an issue with streaming videos direct from itunes? I

Is there an issue with streaming videos direct from itunes? I have good wifi but films just buffer , doesn't happen on flixster on netflix , wonder if there is any tweak to watch a film uninterrupted , because it is very frustrating? Thanks

Apple appears to be having trouble with the iTunes Store servers right now.
(81070)

Video Streaming Issue with Rolling Audio

I have several flash based lessons that I have created that are being distributed online to several companies.
Each lesson has a video that is played within the lesson through the flvplayback control. The videos were supplied by a third party and some of the videos are encoded at 384K and some are at 568K.
One company that is attempting to view the lessons is seeing the following behavior. The video plays for approximately 20 seconds then suddenly the video drops out and the audio continues to play. With the audio still playing the video scrubber rolls back and attempts to start the video again but all that comes through is the audio track again. Now there are 2 instances of the audio playing with no video. This happens a third time and finally keeps going until all the audio is played out.
The IT staff at the company has showed me a fiddler log that shows the flash player making a connection out to Akamai to retrieve the video and then rolling from port 80 to port 1935 and finally to port 443. This would explain the three audio tracks playing
I have read that the flash player will attempt to gather the stream from the stated rtmp location and then if it encounters an issue with a proxy or firewall it will attempt the other ports.
So I am not sure if there is anything I can do by design or programatically to alleviate this issue. It appears to me that the company attempting to view this video has some kind of bandwidth throttling program in place that is kicking off this behavior in the flash player.
Is it possible to prevent the flash player from making the three attempts? Would a sudden cut of bandwidth prompt the player to attempt to roll to another port if a network load balancing program suddenly kicked in? If it is bandwidth is that why the audio stream continues to play because there is enough bandwidth for the audio track to get through, but not the video?
I have attached a screen shot of the sniffer output so you can see the rolling ports thing.

As it turns out they do not allow traffic over the default rtmp ports. They do have a proxy server in place, but it does allow http tunneling. I had one of the users on their network hit the port testing page that adobe provides and hit laptop passed the test by allowing tunneling.
Incidentally it can be found here if you need it: http://kb2.adobe.com/cps/164/tn_16466.html
I created a flash movie that had the flvplayback component in it streaming from one of the flv files I have on Akamai and it worked for the end user.
This was a little depressing because I was hoping I could simply blame his network and walk away .
I then changed the component in my lesson to specifically use tunneling and this worked for the end user with the video issue, but then caused issues for all the other companies viewing the lessons.
I believe they are using FP version 9.0.124.0 at this particular company and not unlike most places I have dealt with they tell me it is impossible to upgrade to FP10.
So I think what is happening is the scorm communications and the web service communications and the video and the load balancing software and the client side proxy server are all coming together to cause the issue.
It seems to me that it isn't an issue I can solve via changing publish settings or programmatically although I have been looking at the proxyType property of the NCManager for the flvplayback control to see if setting the fallback to CONNECT might solve the issue.

Audio outputs white noise /static sound

I recently purchased HP Envy 700-327C.
Out of the box, I noticed a constant static / white noise whenever I plug a headphone into the audio out jack from the headphone. It is the same noise from the front or rear jack. It is very noticeable when no sound is playing. I have tried multiple headphones and speakers with the same problem. When I mute the sound, the noise stops. If I increase the volume, the noise level doesn't change. I have disabled the mic and also reinstalled the driver. I even tried to use the generic windows sound driver. I have an older HP desktop at home before and an HP at work and never had this issue. Is there anything else I can do?

Hello hppoweruser2014,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your desktop is producing a static noise from the headphone jack on your desktop, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
What version of Windows do you have installed on your computer?
Has your computer completed all of its important Windows Updates?
Is there static emitted when there is sound being produced?
Have you updated your HP drivers using the HP Support Assistant?
Does this same issue occur with the audio jack in the back of your desktop (the jack in between the top and bottom)?
If you boot your computer in Safe Mode, is there still a static sound produced in the front of the computer?
In the meantime, I recommend following this document on No Sound from the Speakers or Headphones (Windows 7). This should help correct the static being emitted from the front headphone jack.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Media Encoder turns audio into white noise!

I'm running CS5.5 on an intel Mac 10.6.5, and i have been having problems encoding to flv.
All my videos are edited the same way, and using the same formats etc, yet recently I have found that when converting to .flv, some will work fine, and others will have the audio replaced by white noise.
I cannot figure out what the problem could be. I have also tried using the CS5 version and that is having the same issues.
Checking through the video specs, it appears that the one difference is that the ones which worked fine are all Apple ProRes 422 HQ files, and the ones which failed are Apple 10bit Uncompressed. The strange thing is the audio is the same for both. Yet when the encode problem happens, the video for both is fine, its just the audio where the problem appears.
Anyone else seen this problem? or better still have a solution?
adam

I've answered it myself.
The problem relates to using Uncompressed 10bit movie files...seems the CS5 versions have a problem handling the audio on these. The solution for me was to run the files through Compressor first and change them to Apple ProRes422, before running them through AME.
works every time now!
now if only i could find the bug report form....

Bluetooth Audio Blasts White Noise

I have a Macbook Pro and when I listen to music via bluetooth (headphones, speakers, etc.) it eventually glitches and then blasts white noise. Anyone know what the problem is?
By the way, I don't experience this problem when using the same bluetooth devices with my iPhone.

the problem is that 10.10.2 is a piece of junk. look through the discussions, and there are already a number of them mentioning this. in all the posts i've read, this started with that update. amazing that apple can cause a problem that can both damage hearing and equipment, and after a month still nothing. i've had it happen about 5 times today. add to that, my bluetooth keyboard has disconnected and reconnected 30 times, often consecutively.
the only fix is disconnect the device, and reconnect. or, if you just mute audio and wait a number of minutes it is usually gone after un-muting. 10.10.2 is a failure. fingers crossed 10.10.3 fixes it. hope my speakers don't blowout in the meantime.

Problem with streaming audio

I wasn't sure if this is a problem with Safari, iTunes, or OS X, so rather than post the question in all three of those forums I decided to post the question here.
I can't seem to get streaming audio to open and play when I click on their appropriate links in Safari. I tried several different links through a few different sites, but when I click on a "Play" or "Listen Now" link for an MP3 stream, a Safari download window opens and that's it -- no stream.
I solved the problem by copying the link, going to iTunes, and choosing "Open Stream" from the "Advanced" menu, and the stream played fine, but I would hate to have to do that every time I want to sample an audio stream.
Anyone know why it wouldn't work when I clicked on the direct link?
Thanks.

Nevermind. Noob figured out what he was doing wrong.
See Safari "Preferences", "Open 'safe' files after downloading".
/smacks self on head

Graphic Issues with Leopard - iMac 24" White GeForce 7300 GT

Upon installing Leopard, I've noticed several graphics issues and general lag and delayed response with the interface. I'm running a 24" iMac 2.16ghz White early 2007, 3gb of RAM, with the GeForce 7300GT card. I have Time Machine disabled, and Spotlight has fully indexed.
When installing Leopard, I did an "Erase and Install" and have manually installed my Applications after the Leopard install. I'm using only a few applications that are all "Leopard ready" and have a relatively clean system at this point. I have also cleaned the PRAM, per the recommendations in some of the threads ive read, which didn't seem to correct the issue in this case.
It seems that any time I run any type of video or graphical application, such as Photo Booth, World of Warcraft, iChat, etc, I get a large amount of lag and slow response with the interface. Windows respond very slowly, and the applications freeze for 15-20 seconds. Even when not engaging any applications, opening folders in the finder as well as the dock appear to stall and respond very slowly.
Aside from these issues, Leopard has performed very well and I have had no other issues. Quicklook and coverflow all seem to respond very quickly and smoothly. My guess is that it may be driver related as it seems to be centered around items that are engaging the video card, though it is strange how some graphical effects seem to work smoothly while others are rather choppy. I have been watching the Activity Monitor and there don't appear to be any processes that are sucking up CPU, and nothing obvious that may be reducing performance.
I'm just curious if anyone else has noticed anything similar to this on similar hardware, or possibly may know what the culprit could be. My best guess, again, is that it could be the drivers or firmware with this specific hardware that I'm using.
Thanks for your time

I've had the same graphics issues with my white iMac 24 (serial no starts W8638), but with the GeForce 7600 card. AppleCare got me to do all the usual stuff (reset PRAM, clean Leopard install etc) but problems continued. The usual pattern is that after a while horizontal lines appear (usually in Safari) and things deteriorate form then on until there is so much pixellation that I have to turn off and back on.
Yesterday I ran for several hours using SMCFanControl to set the fans to max and had no problems, so my suspicion is that the additional graphics requirements of Leopard are over-heating the graphics card or logic board.
The Apple engineer took the machine away today and said they'll probably replace the logic board and graphics card (I think they can't change one without the other in the iMac?).
Will be a few days but I'll report back on what repairs they make and whether they solve the problem. My fear is that any changes they make will have no effect if its a design problem and the card is just not up to the job without over-heating. Though it could be the card just needs a good clean
Has anyone else tried increasing fan speed?

Trouble with streaming audio on firefox 4 - mac intel 10.6 with quictime plug-in 7.6?

recently having trouble playing streaming audio from these sites:
1. merriam webster pronunciation popup link:
http://www.merriam-webster.com/audio.php?file=puissa01&word=puissance&text=\%3Cspan%20class%3D%22unicode%22%3E%CB%88%3C%2Fspan%3Epwi-s%3Csup%3E%C9%99%3C%2Fsup%3En%28t%29s%2C%20%3Cspan%20class%3D%22unicode%22%3E%CB%88%3C%2Fspan%3Epy%C3%BC-%C9%99-s%C9%99n%28t%29s%2C%20py%C3%BC-%3Cspan%20class%3D%22unicode%22%3E%CB%88%3C%2Fspan%3Ei-s%3Csup%3E%C9%99%3C%2Fsup%3En%28t%29s\
The following mp3 link/streams are a gamble, b/c they're often buggy in FF4 yet they always work great in safari:
2. http://www.knbr.com/portals/3/podcasts/murphmac/0520petergammons.mp3
I tested my quicktime plug-in on the mozilla support plug-in page and I can play the film trailers at the test link provided.
link found @ : http://www.knbr.com/OnDemand/Podcasts/tabid/1065/Default.aspx
mac os x 10.6.7 intel macbook, FF4, quictime plug-in 7.6, shockwave flash plug-in

This is a follow up on the first question. I went out to the issuu website to see if it was a problem only with the document posted by me. Answer - No. Every document opened to full screen showed the same behavior. The document opens, but the full-page view stays up for only a second or two and then closes leaving you back at the referral page.

Having issues with my audio as well as another issue corrosponding to it..

Hello, hopefully I am posting this subject in the appropriate area. I have been having an issue with my laptop.. I've had it for about three years now, its a satellite C655D .... what it does is, when I listen to anything with audio, it freezes and then when I have audio on, through the speakers a lag comes up, sounds like a buzz... & when it freezes, the whole entire computer freezes. I've tried virus scans and I just wiped the whole computer out but its still doing it. It's not as bad as it was before, because when it froze before I wiped my computer out, it froze for a couple of minutes, where as now, it freezes for a second, but thats just for now, it may get worse again. I am not sure whats going on, if its the hard drive, or the driver.. Does anyone know? The warranty on this laptop has expired I cannot afford to fix it... So if its the hard drive, my only choice is to wait till it dies completely. Thanks for reading, God Bless.

Which Satellite C655D? See the label on the bottom.
I just wiped the whole computer out
What could that possibly mean?
Perhaps you restored the hard disk to its original out-of-the-box contents using Toshiba recovery media?
-Jerry

Issues with video/audio playback and Source window

I have some video that I am trying to import to get into my sequence. Anytime I open the video into my source window (or drag it to the timeline), the audio goes crazy. It starts skipping around and jumbling itself. When I open the video file in Quicktime on my computer, it opens and plays fine. Also, I don't know if it is unrelated, but sometimes when I open a video in my Source window, there is no audio. I can drag it to the Sequence and double click on it to bring the Sequence video into the Source window and it plays fine.
The video that I am having issues with is a .mov filmed from an iPad (not sure which iPad model). It is filmed in Portrait mode, not sure if that matters. Please let me know what other information might be needed to troubleshoot this issue.
Thanks!

Ooh. Sorry about that.
- I am using Adobe Premiere Pro CS6 v.6.0.3
- I'm sure I have the latest update. I'm using Creative Cloud, and the Adobe Application Update Manager says everything is up to date.
- Operating System is Windows 7 Professional (Service Pack 1)
- Source footage is a .mov filmed in portrait mode (I didn't record it.. Haha) on an iPad, not sure the model.
- I am getting no error messages.
- I was just dragging the video file from the Media Browser to the Source window. Nothing special.
- This is working on all of the other clips filmed from the same iPad at same resolution, etc. Also, this particular video plays perfectly in Quicktime. It's just when I try to play it in Premiere Pro.
- Other software that is currently running is standard stuff: antivirus, Outlook, Gtalk, Dropbox. Nothing that uses audio.
- I have installed K-Lite Codec pack when I got the computer.
- I have a Dell Preision T7600, Dual Xeon Quad-core processors (2.00GHz), 16 GBs of ram, Nvidia Quadro 4000 (2GB), and running off of a 256GB SSD.
- I am using the Mercury Playback Engine GPU Acceleration.
- The issue is happening on playback, both in the Source window and the Program window when I drag the video to the Sequence. It plays fine in Quicktime.

Re: Graphic Issues with Leopard - iMac 24" White GeForce 7300 GT

I noticed the same issue. It's especially noticeable in Photo Booth. The video and sound don't sync up.

I've had the same graphics issues with my white iMac 24 (serial no starts W8638), but with the GeForce 7600 card. AppleCare got me to do all the usual stuff (reset PRAM, clean Leopard install etc) but problems continued. The usual pattern is that after a while horizontal lines appear (usually in Safari) and things deteriorate form then on until there is so much pixellation that I have to turn off and back on.
Yesterday I ran for several hours using SMCFanControl to set the fans to max and had no problems, so my suspicion is that the additional graphics requirements of Leopard are over-heating the graphics card or logic board.
The Apple engineer took the machine away today and said they'll probably replace the logic board and graphics card (I think they can't change one without the other in the iMac?).
Will be a few days but I'll report back on what repairs they make and whether they solve the problem. My fear is that any changes they make will have no effect if its a design problem and the card is just not up to the job without over-heating. Though it could be the card just needs a good clean
Has anyone else tried increasing fan speed?

SBH50 issue with streaming audio (sec white noise)

Similar Messages

Maybe you are looking for