SBH52 and headphone mic?

I have SBH52 and Sony XBA-2VP headset. Acording to following review it should use in line microphone of the headset when using compatible headset.
http://recombu.com/mobile/news/sony-sbh52-review_M19403.html
But I tried several headphones with mic built in. It only uses ic of the unit.
The information in the review is wrong? Anyway of getting the mic of the headphone worked instead of unit mic??

Me too facing the same problem ECO sound or low sound problem replaced the headset but still having the problem even i have to select sim for dialing with my Xperia T2 ultra then there is no use of bluetooth headsets...
Sony have to fix the issue of low sound & dual sim dial complaining from last month but there is no solution service is too poor i didnt expect this from SONY.

Similar Messages

Win 8 - How to use StereoMix and Headphones Mic at the same time?

I am using Windows 8 64 bit and believe I may have an IDT driver problem.
I need to enable StereoMix and my Headphones Mic at the same time. I know this was previously possible with windows xp and windows 7.
What happens is If I enable either Headphones Mic (Logitech headphones with Mic) or StereoMix the other one becomes " current;ly unavailable" I cannot get them both to work together. I can get StereoMix and the Internal Mic to work together ( both enabled at the same time) but the sound quality is bad because the internal mic picks up noises from the PC. I need to have both my headphones mic and stereo mix enabled at the same time.
The driver I'm using is the one provided by HP with the laptop. It is called sp59620.exe
Would another IDT driver solve the problem? Can you think of another reason this is not working?
Here are my specs.
System Manufacturer/Model Number HP Pavillion G7-2251dx
OS Windows 8 64 bit
CPU AMD A-8 4500M
Memory 8 Gigabytes DDR3 sdram
Graphics Card Discrete ATI Radeon HD 7640G with 2 Gigs
Sound Card IDT Audio
Monitor(s) Displays 17.3
Screen Resolution 1600x900
If you cannot help, where else should I look? i have tried Windows and Microsoft forums and no one can give me an answer.
Thank you.

I have tried the instructions in that video and I cant get passed the very bad feedback i get when telling my recording device to Listen. His secone instruction from his notes here
["Right Click the Realtech HD audio device and set as default if its not already.
(note you may want to turn off any powered speakers you may have to prevent feedback.)
-Select the Recording Tab at the top of the window.
-Select the Stereo Mix device and set it to default if its not already.
-Right click and select Properties.
-Select the Listen Tab at the top of the window.
-Change the drop-down box to the entry for USB headset and check the Listen to this device checkbox.
-click ok to dismiss the window.
-Right click on the USB headset microphone device and select properties.
-Select the Listen Tab at the top of the window.
-Change the drop-down box to the entry for the Realtech HD Audio device and check the Listen to this device checkbox.
-click ok to dismiss the window.
So, essentially, the game audio will play through the Realtec, your mic is also set to play to the Realtec. both audio streams are now part of Stereo Mix. Stereo Mix is being listened to by your headset allowing you to hear the game and your voice.]
~~~~~~~~~~~~~~~~~
Don't know about turning off any powered speakers.. the only speakers I have besides the headphones are the internal laptop speakers. I get the same feedback if i have the headphones plugged in or not.

27" 2012 iMac and Headphones+Mic (2x3.5mm connectors)

I see that the new iMac specification states that it has one 3.5mm connector that supports Apple iPhone headset with microphone. If I have a headsets with microphone (not Apple).
- If I use a 3.5mm 4-Pin to 2x 3-Pin 3.5mm Headset Splitter Adapter to connect my headphones+mic to new iMac will it work? (let say this adapter )
- Is there anything Apple specific and not every 4 pin 3.5mm connector will work for headphones+mic? I noted that on headsets+mic that are supposed to be used with phones some have iPhone lable and some do not as well I know that not all this kind of sets work on iPhone. I have tried HTC headsets+mic and it won't work on iPhone.
- or it is better to use USB Stereo Audio Adapter (like this)?
- any suggestions if one needs to use the headset+mic that has 2x3.5mm connectors (one from mic and one for headsets) and do not want to buy a new ones?

Hi Munas,
I got my iMac in advance so I could test the Lindy cable with my Sennheiser PC 360. Bad news: it doesn't work! The microphone is not recognized and only the iMac internal microphone is functional. For cons, I tested my iPhone headset with microphone (Atomic Floyd Superdarts) and it worked perfectly.
IMHO, the conclusion is that the microphone impedance for a classic headset is not compatible with an iMac or the cable that I tested is not suitable !

My MacBook Pro has an aerphone jack but nothing for microphone. I am trying to use Dragon Dictate and a friend gave me a USB attachment to connect to the mic and headphone. It is in a transparent plastic case charcoal gray in color and says 3D sound on th

I have Dragon Dictate but did not notice until now that the earphone jack is only for listening so I cannot dictate using headphones and the mic on the computer is not good enough for that. A friend gave me a USB card that says 3D Sound on top; it is a plastic case, charcoal gray in color and side jacks to connect headphone and mic. Connected to computer but it does not do a thing. Any ideas on how to make it work?

You are not supposed to connect a pair of speakers(as in left and right in a stereo pair)to two separate out jacks on the sound card.the place on the card where headphones/speakers with the mini jack goes is the right place.

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

What operating system are you using? Is it on a Mac or a PC? Which preferences are set for external mic/headphones, Audition's or the computers?

Headphones mode and top mic simultaneously not working

A few days my iphone 4 get in headphones mode. first i thought it was maybe that because i was in a very hot place, the iphone could get damaged, anyway, the day after the speaker mic (top mic) stopped working as well, i cleaned the headphones jack and the mic. Now its not stuck in headphones mode, but i cant use the speaker, record videos or use facetime. Any idea?
Thanks

Hi again toxyyy,
Thank you for the quick reply!
Based on the information provided in your post, I recommend following this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). This should restore the original software and hardware drivers that came with your computer. Once the software installation has completed, please follow this document on using the HP Support Assistant to update your system's drivers.
For the XP component of your computer, I recommend following this document on No sound (Windows 98, ME, and XP). This should help to restore the sound on the XP side of your Operating System.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Headphone mode and top mic simultaneously not working

A few days my iphone 4 get in headphones mode. first i thought it was maybe that because i was in a very hot place, the iphone could get damaged, anyway, the day after the speaker mic (top mic) stopped working as well, i cleaned the headphones jack and the mic. Now its not stuck in headphones mode, but i cant use the speaker, record videos or use facetime. Any idea?
Thanks

sayounus wrote:
Please confirm if you would like to have logs(rar file) of my mobile?
This is a user-to-user community support forum. We are not BlackBerry employees, but volunteers who enjoy assisting other users. BlackBerry personnel rarely comment on queries posted here. You would have noticed this in the message upon registration and noted at the top of each page of this forum site.f
You can try an OS upgrade if you want. What is your Operating System loaded to your device? From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why am I hearing a clicking noise in my headphones? I'm on the iMac and I'm going through logic pro x. i have a focusrite scarlett 2i2 and my mic is a blue spark. is it my presets? i just want the clicking/popping noise to go away

why am I hearing a clicking noise in my headphones? I'm on the iMac and I'm going through logic pro x. i have a focusrite scarlett 2i2 and my mic is a blue spark. is it my presets? i just want the clicking/popping noise to go away

Hi,
Sorry to hear you are experiencing problems with you device.
Please raise a case with our Customer Support team and we will do everything we can to help:
http://global.focusrite.com/answerbase/contact
We look forward to hearing from you.
Best regards,
Luke
Focusrite Technical Support UK

I have a digital voice recorder with a 3.5mm mic and headphone jack and want to transfer some recorded lecture to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

I have a digital voice recorder with a 3.5mm microphone and headphone jack and want to transfer some recorded lectures to my mac book pro. The mac book does not have 3.5mm jacks. Does anyone know if a jack to USB converter would work?

Is there a pattern to the time of day or other detail that may be
traced back to a OS X system cause of this odd phenomenon?
Are there any copies of system files on any of the attached USB
external drives? Any libraries, such as iTunes, iPhoto, etc?
Once the drives are indexed by Spotlight, are their permissions
ignored by the OS X? Content, if neutral, should not affect the
wake or sleep cycle; especially if they're ignored by the OS X.
Could there be a bad cable or other component? If so that would
be a difficult process of elimination to detect it. Usually replacing
most suspect components in the USB stream (external to Macs)
is a rote way to mechanically test that idea; & not 100% sure.
Does the equipment all have a good ground to the utility or house
electrical field? An intermittent ground may affect more than sleep.
Hard to say at this point. Maybe a late-night talk radio guru on
remote viewing could peer into your situation and sleuth it out?
Sorry to have run out of ideas, but the process must be electrical
& mechanical to some extent. - Or perhaps odd software inspired.
Do you have any phone-home spyware items inside, just jumping
at the chance to spill your information? Little Snitch may help.
PS: Perhaps the computer needs to go into Apple & have a genius
or product specialist at AASP test the unit thoroughly... BlueTooth?
see:
https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
Good luck & happy computing!
edited 2x

Audigy and front Mic/Headset connectors at c

Hello,
I?m thinking abut buying an Audigy card, but need to know IF AND HOW I may connect the card to the front connectors wich are integrated in my computercase (Mic and Headphone).
(I dont want any 5 /4 connector panel)
Please helpMessage Edited by Gork on 05-24-2006 04:35 AM

I found this information on Creative KnowledgeBase ..
Sound Blaster X-Fi Xtreme Audio and Sound Blaster X-Fi XtremeGamer feature the Intel High Definition Audio (Intel HD Audio) Front Panel header.
Bad information is that it's not compatible w/ all front panel connection methods.
This header follows the standard 2x5pin Intel HD Audio conform layout. It is not compatible with AC97 or Intel-compatible HD Front Panel Audio.
http://us.creative.com/support/kb/article.asp?l=2&sid=26308
So, it seems like CT has been partly listening your complains guys!!
jutapaMessage Edited by jutapa on -29-20060:50 AM

Both internal and USB mics not working

Hi there, all. Long-time lurker, first-time poster. Starting last night, I have been having issues with microphone use on my iBook G4. Neither the internal mic nor my USB headset mic (Altec Lansing AHS302USB) are accepting input.
The internal mic's failure doesn't surprise me, as I have heard about the delicate nature of the wire connecting the internal mic from its position on the display down to the main computer. It's the USB mic that confuses me, since USB mics are what everyone seems to recommend that people use when the internal mic is on the fritz (thanks to other mics not working with Mac due to the line-in thing). Also there is the fact that I have used this headset with this computer for over a year with no significant issues until now, with both mics simultaneously failing.
There doesn't seem to be a problem with the headset's wires; I am still able to hear audio through the headphones quite well, and when I load my audio recording program (Audio In) and Sound Preferences, I can see the occasional blip of sound recognition when I move the USB adapter portion around in the port. These blips even occur when the pink microphone jack and headphones jack are unplugged from the adapter, so this suggests to me that the problem lies not with the wires, but somewhere in the USB adapter, port, or the computer itself.
I'm leaning toward the computer itself, since it just seems odd that both mics would just happen to stop working at the same time. That and the fact that audio output still works through the headset, and the USB ports work fine for other USB devices such as my external drive and iPod.
I have tried restarting, resetting the PRAM, and repairing permissions with Disk Utility. Nothing's working so far.
Does anyone have any idea what could possibly be wrong?
For reference's sake, I took a recording of the sound that results from jiggling the USB headset adapter in the port. It's very quiet, so you may need to turn up the volume a little bit to hear it. Again, these are the ONLY sounds that the mic is able to pick up currently.
http://animeutahime.com/temp/faultymicrecording.mp3
iBook G4 Mac OS X (10.4.10) 768 MB RAM, 37.7 GB hard disk

Just to chime in here - I wonder if it's down to the software: I've recently updated to 10.4.10, and the internal mic seems to have stopped working.
One positive effect of the change to 10.4.10 is that my Griffin iMic no longer flips to 8-bit, 22khz recording when I plug it in.
Having said that, I really like to get my internal mic back up and running again.
iBook Mac OS X (10.4.10) 1.5gb RAM, 60gb hard disk

Anyway to get combo headphone/mic port to work on Win7 (iMac 27" '13)

Hi,
I just ordered a split cable for the 3,5mm headphone/mic port to be able to use my headset. OS X recognizes the headset - it changes from the internal mic to the external, so no problem with that. But when using Windows 7 (Bootcamp, not virtual) it's not possible to select the external mic, there's only iMac's internal mic listed in "Recording devices".
No doubt this is a driver issue, but is there any solution for it? And yeah, I could buy USB headset or external audio interface, but let's forget those options for now. Sorry if asked (and it surely is) many times before, couldn't find anything with google.
Thanks!
- Juuso

Hi BDAqua,
I can go to /System/Library/Frameworks/, but JavaVM.framework/Versions/A/JavaVM does not exist!
Hi Linc,
I have already downloaded that updater, and it says 'A newer version of this package is already installed'

Weird sound issue. Windows sound splitting into two volume sliders and headphones stop working

So I am a network admin thus I am not exactly computer illiterate.
Normally my latop has one volume slider for Speakers and Headphones, however when exiting a game or unplugging/plugging in a usb device windows will suddenly split volume into two seperate sliders for speakers and headphones, it isnt doing it right this second, but it looks like it thinks my headphones are a headset when this happens.
After this happens my headphones stop working completely and only speakers work. To get sound back to normal I have to reset the computer, after I reboot everything is fine and it goes back to one volume slider. I am using a normal set of headphones no mic, no bluetooth.
Anyone have any ideas?
Thanks.

bump...

Can I use my headset for "sound-out" and phone mic...

I have an E51 and the headset that came with it. I would like to achieve the following during calls: To use the headset for sound-out (i.e. as headphones) and the phone mic for sound-in. The mic on the headset gives a lot of static and I would rather use the phone mic (girlfriend complains).
So I tried this: Under Tools>Settings>General>Enhancement, I set the Default to Headphones.
Still, when I connect my headset it says "Default Enhancement: Headset" and the headset mic is automatically used.
The default enhancement settings does not seem to matter.
Does anyone know if there is a way to solve this? Is there a way to manually switch between the headset and phone mics?
Thanks!

Thanks for the reply. I am not using a bluetooth headset but a cabled one (that one that came with the phone for me -- I guess nokia skimped a bit here, not shipping with a bt headset).
I was recently told basically the same thing you are saying in a store, that it is not possible to use the mic for sound-in during a headset call. He also said that any cabled headset or even *headphones* will be recognized as a headset by nokia phones because they all have the same 3 connectors (right, left, mic) on the 2.5mm jack. Can that really be right?
So that means that even if I get a set of cabled headphones for my e51, I will not be able to use them for sound-out during a call?
cheers

I/O Drive Upgrade Kit - only headphone/mic work!

?<img height="300" src="http://ecx.images-amazon.com/images/I/5ODGMPRp7L._SL500_AA300_.jpg[/img] width="300">
My card is a? PCIX X-Fi Titanium Fatalty Pro Series.
The upgrade kit is a Sound Blaster X-Fi Titanium Fatalty I/O Dri've Upgrade Kit
I have one of those and I cant get anything other than the headphone/mic jacks to work.
The volume control and the 3 buttons do not work (buttons do not light up).
I thought it might be the cables, so I paid $5 to get replacement cables sent to me from the RMA dept and they still do not work.
Apparently, this issue is pretty widespread, but nobody seems to have a solutions.
Here's a thread [url="http://www.tomshardware.com/forum/2524-28-dri've-sound-card-half-working-help" rel="nofollow">from tomshardware[/url] with the same issue, yet no solutions.
DOES ANYONE HAVE A FIX?

Corpx
Please refer to <a rel="nofollow" href="http://support.creative.com/kb/showarticle.aspx?sid=56793]this article[/url] and ensure that the cables are fully seated in the connectors. If this is still not working for you, it would be advisable to get in touch with our <a rel="nofollow" href="http://support.creative.com/contact/emailform.aspx]Customer Support[/url] for further assistance.

SBH52 and headphone mic?

Similar Messages

Maybe you are looking for