/sbin/init not found after Solaris10-x86 first reboot
Hello all,
I just installed Solaris 10 on a x86. Nothing seemed to go awry, AFAIK.
After the very first reboot it fails to boot with this:
WARNING: exec(/sbin/init) file not found
(Could not start init)
Press any key to reboot.
So I'm stuck, it seems.
It does not seem that the / slice is missing as I guess I'd have a totally different error message, something like "could not mount root fs", I dunno.
I'm sure that if I could boot the install DVD in single mode I'd be able to go and really check if /sbin/init really exists.
Except that... I'm used to Sparc with its OPB, dunno how to get x86's equivalent to OpenBoot.
Anyway, anyone came across the same "missing file" problem after initial install, and if so, how did you get out of it ?
Bonus question, is there an equivalent to OpenBoot on x86 and how to reach it ?
Before you ask.. this PC ran on Solaris 9/x86 a looooong time ago, no hardware changes, so no need to send me to the HCL :)
Thanks,
Jeff
WARNING: exec(/sbin/init) file not foundSorry, can't help you with this since I never encountered such an error.
Except that... I'm used to Sparc with its OPB, dunno
how to get x86's equivalent to OpenBoot.That would be the configuration manager. Its the question you get in the beginning where it asks you what image to boot ('press b or enter to boot normally'). If you press escape there you get into the section where you can determine the default boot device and add new hardware drivers when needed.
Similar Messages
-
Method init not found in class oracle.apps.fnd.cp.request.C
Hi all,
I am reffering to Oracle Application Framework Developers Guide Release
11.5.10 RUP3 December 2, 2005
As given in the document (page 275) Concurrent Processing: Request Submission
and Monitoring ,I want the Concurrent Processing Request Submission and Monitoring user interfaces available on my OA Framework-based pages.
I have followed the steps given in the OADevGuide but when the custom CO
is compiled it gives following error.
method <init> not found in class oracle.apps.fnd.cp.request.ConcurrentRequest.
The import statement in our code is as followed
import oracle.apps.fnd.cp.request.ConcurrentRequest;
import oracle.apps.fnd.cp.request.RequestSubmissionException;
wheather I have to open a SR on metalink asking for an updated file ConcurrentRequest.class ?
Thanks in advance,
Anant.Hi All,
Thanks Prabhat for that update.
Thanks tapashray cause u r update on thread Apply not being caught in debugger helped me a lot.
Right now I am facing a different problem.
On click of submit button The page gets called but it gives error as
oracle.apps.fnd.framework.OAException: Could not load application module 'oracle.apps.fnd.cp.srs.server.RequestAM'.
In myprojects folder under oracle dir at reqd path I have this AM .
Whether I need to add the bc4j pkg "oracle.apps.fnd.cp.srs.server.RequestAM" in my project . I dont think so as I am not extending any class/VO or doing any substitution.
my code is as followed
public void processFormData(OAPageContext pageContext, OAWebBean webBean)
System.out.println("Inside ProcessFormData");
if (pageContext.getParameter("Submit")!= null )
System.out.println("Inside Submit ");
try
// get the JDBC connection
OAApplicationModule am = pageContext.getApplicationModule(webBean);
//Connection conn = (Connection)am.getOADBTransaction();
OADBTransaction conn = am.getOADBTransaction();
System.out.println("OADBTransaction conn "+conn);
ConcurrentRequest cr = new ConcurrentRequest(conn.getJdbcConnection());
System.out.println(" ConcurrentRequest cr "+cr);
cr.setDeferred();
// call submit request
Vector param = new Vector();
String selectedValue = pageContext.getParameter("reportList");
System.out.println("selectedValue -> "+selectedValue);
param.add(selectedValue);
System.out.println("before cr.submitRequest ");
int reqId = cr.submitRequest("SQLGL", "RGFSGXML", "Run FSG and XML Publisher",null, false, param);
// int reqId = cr.submitRequest("SYSADMIN", "FNDSCURS", "User Responsibility Report",null, false, param);
System.out.println("After cr.submitRequest reqId "+reqId);
conn.commit();
System.out.println("After commit");
// redirect page to Request Scheduling page
HashMap parameters = new HashMap();
String url = "OA.jsp";
parameters.put("akRegionApplicationId", "0");
parameters.put("akRegionCode", "FNDCPPROGRAMPAGE");
String id = "" + reqId + "";
parameters.put("requestMode", "DEFERRED");
parameters.put("requestId", id);
System.out.println("before page forward ");
pageContext.setForwardURL("BSE_CONC_REQUEST"
,OAWebBeanConstants.KEEP_MENU_CONTEXT
,null
,parameters
,true
,OAWebBeanConstants.ADD_BREAD_CRUMB_NO
,OAWebBeanConstants.IGNORE_MESSAGES);
catch(RequestSubmissionException reportError)
System.out.println("RequestSubmissionException raised "+reportError.getStackTrace());
catch(SetDeferredException deferred)
System.out.println("SetDeferredException raised "+deferred.getStackTrace());
super.processFormData(pageContext,webBean);
Hope I have given all the details.
Regards,
Anant.
Message was edited by: Removed the error stack so that thread details remain on the same page
Anant -
CS6 photoshop not found after downloading and putting in serial number
CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only??
Thanks!Nowhere during the installation does it give me the option to select the previous version I purchased! This is a new install on a new computer because my other computer no longer works. There is no option for me to select CS6 PS (NON EXTENDED) on the download from Adobe! When I install it only installs the extended version and tells me my serial number is valid but not for the extended. When you provided the link to the page that has the downloads, all that loads is the extended version. Can you please give me a link to the CS6 (not extended) so I can get back to work? I also was able to get the hard drive out of my computer that no longer works and put it on my new computer I'm trying to install CS6 on and the installer gave me NO OPTIONS to enter my old serial#.
This is beyond frustrating!!!! I have a computer go out on me, and have to buy a new computer, then when I try to install CS6 PS it will not install. In the meantime I'm trying to keep my small business going to stay in business. I can't call any one from adobe. All I can do is send emails to get this resolved and wait.
Please please help me! -
Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #
CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
Thanks!check your duplicate post. there are two responses.
-
"CJS-30199 The CTC classes were not found after waiting for 900 seconds."
Here's the snippet of the sapinst_dev.log
I am trying to install Central Instance on a RedHat Enterprise 4 server (32bit). But stuck at
this stage.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 FSPath(/usr/sap/LN1/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/com/sap/ctc/util/ConfigMainExt.class).isExisting() done: false
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2007-05-10 20:19:48.093 NWJavaInstance._waitForFile() - elapsed time = 910 timeout = 900
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
NWException thrown: nw.usageTypes.ctcSyncWaitTimeout:
The CTC classes were not found after waiting for 900 seconds.
ERROR 2007-05-10 20:19:48
CJSlibModule::writeError_impl()
CJS-30199 The CTC classes were not found after waiting for 900 seconds.
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2007-05-10 20:19:48 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step configCAF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|15|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAF was executed with status ERROR .
Your help is much appreciated.
Thanks and Regards,
Satish/Hello Satish
Please do following checklist:
1. Check that the J2EE engine is up and running (e.g. log in with Admin)
2. Check that the following application is running:
Visual Admin => Cluster => Server => Services => Deploy
Select "Application" and look for "sap.com/tclmctcutilbasic_ear
3. Try to continue installation
It could be helpful to apply the patch for CTC as per note # 938261
before restarting.
and also try to add more memory allocation.
If issue persists,
- I'd like to know which installation DVD/CD number being using ?
- The contents of the LABEL.ASC file.
- The installation guide reference and title used for this install ?
- SAPINST version ?
- Oracle version/patch level ?
- Operating system version/patch level ?
See also:
Note # 851251 - SAP NetWeaver 2004s Installation on UNIX
Thanks
Kenny -
Error message of "404 - page not found" after downloading and installing Firefox 15
Error message of "404 page not found" after downloading the latest version of Firefox.
This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].
-
8820: Symbol EventInjector$KeyEvent. init not found
Hi
I am creating a custom application for blackberry which uses the EventInjector API and more precisely the following code:
EventInjector.KeyEvent inject = new EventInjector.KeyEvent(EventInjector.KeyEvent.KEY_DOWN,Characters.ESCAPE,50);inject.post(); inject.post();
The code works on the Bold and on all the devices I tried through the simulator but does not work for the 8820.
The error I get is when I try to start the application and is:
Symbol EventInjector$KeyEvent.<init> not found
I am not sure what I am missing, permissions are wide open for the Application itself. Any Ideas?
Any help would be appreciated.
Thx
xtosplease refer infoDoc#89603, recompile the program will resolve the issue, then could you please send your app sample code to me ([email protected]) so that I can made the doc more perfect.
-
It might be me but I think my computer is trying to make my life misserable. I've had Arch working on my Pentium 3 witch runs with an 450mhz processor. But yesterday I recieved a new HDD cause my "old" one had some unrepaireble errors.
I reinstalled Arch again the way it's supposed to be done (and the last time it worked).. But this time I get the following errors Note: I didn;t get all of the error messages since they went away to fast):
Sontreset failed.
SRST failed
init not found
atkbd.c: Spurious ack on isa006/serio0 some program might me trying access hardware directly
What's going on here? The last error continues to turn up. I don;t get in linux. The same happens at ArchbLinux Falback
yours,
BernhardHi Bernie,
I have the same problem...I am searching a few days and cannot find the soluton.
This is confusing:
piix/ata_piix (Intel chipsets) - IMPORTANT
If you have enabled ide/pata/sata HOOKs in /etc/mkinitcpio.conf the 'ata_piix' module will be used.
This may cause your devices to shift names, eg:
- IDE: devices from hd? to sd?
And now:
You can get the old hda names back by appending 'earlymodules=piix' to your kernel commandline
> this means we can use hdax back in grub and in fstab ?
> 'earlymodules=piix' is an option for piix users ? Or are we obliged to add it ? -
hey there,
i'm writing this from a livecd, as i can't boot into my archlinux-system anymore. everytime i'm getting this error:
initramfs completed - control passing to kinit
IP-config: no devices to configure
waiting 0s before mounting root device...
EXT3-fs: mounted filesystem in ordered data mode
kinit: Mounted root (ext3 filesystem) readonly
kjournald starting: commit interval 5 seconds
kinit: init not found!
Kernel panic - not syncing. Attempted to kill init!
i used to see this happening several times before, but then pressing the resetbutton two or three times did the trick. which by the way i found very curious but didn't had the enthusiasm to investigate further. (i know, that probably was a bad mistake)
lately no restarting no beating and no shouting seems to help anymore.
funny thing: i have two archlinux installations on my pc and BOTH bootprocesses end in the same kernel panic.
has anyone any idea or experienced anything similar before?
thanks a lot
Last edited by calle (2009-05-14 16:49:10)phrakture wrote:
booting isolinux via grub seems sketchy at best.
But, I can tell you this (if it helps). "init not found" means that it cannot find /bin/init on the root filesystem. This usually means that it can't MOUNT the root filesystem (the CD itself).
or mount the HDD partition which is the root fs image of the CD on the HDD ,
if thats what he is attempting to do ... i.e. boot CD image from HDD.
Last edited by keratos (2008-05-08 21:39:13) -
Get "404 Not Found" after deployment. How to find out correct URL?
To the experienced:
In preparing to deploy my application, I am using JDeveloper 10.1.3.4 to deploy the application to the standalone oc4j server that is included in JDeveloper. After the deployment, I get the "404 Not Found" error when trying to invoke the application in a browser. The deployment looks OK, becasue the log window in JDeveloper showed no error when running deployment from inside JDeveloper. Therefore I guess the question is how to find out the correct URL to invoke the application. The steps I took in doing the deployment are as follows.
I first installed the standalone oc4j by running the <jdev_home>\jdev\bin\start_oc4j .bat file. The installation is OK because I deployed the SRTutorial applcation and invoked it in a browser successfully.
The WAR file was created by right-clicking the ViewController project and select to create a WAR file. To the application's Context Root its own name, I typed "ZB" in the box for the context root.
Then in ViewController -> Resources, right_click the deployment file (ZBOV.deploy) and chose "Deploy to" the local_standalone_oc4j. The messages in JDeveloper's log window for the deployment are all clean without errors.
I then used this url to invoke the deployed application in a browser:
http://localhost:8888/ZB/faces/staff/login.jspx
But I got an "404 Not Found" error. Right away I tried invoking the SRTutorial application, and it runs fine.
login.jspx is one of the pages for the appllication. In the application navigator, it is located with other files in the ViewController/Web Content/staff folder, therefore I used /staff/login.jspx after ZB/faces.
What could be wrong? If the deployment is actually successful, how to find out the correct url to invoke the application?
Many thanks for your help!
NewmanHi, Arun,
Thank you for the suggestion. I tried it but got the same error.
I tried it by first undeploying the application using the enterprise manager page (which is also part of the oc4j included in JDeveloper). I select the application and clicked the undeploy link, confirmed that I wanted to remove it. And it was removed.
Then in JDeveloper, I right-clicked the ViewController, and in the properties of the probject selected "J2EE Application" and then selected "Use Custom Settings", then in the "J2EE Web Context Root" box I entered "ZB". Created the deployment profile again, overwriting the existing one, and then right-clicked the ZB.deploy node to deploy to the standalone oc4j on the localhost. And I used the url:
http://localhost:8888/ZB/faces/staff/login.jspx
And I got the same "404 Not Found" error.
There was no error at the time of deployment using the ZB.deploy profile. On the enterprise manager page, the path of the deployed application is given as /C:/jdev10134/j2ee/home/applications/ZB.ear, and the folder of the deployed application is there. Question is: if the deployment is actually OK, can the correct URL be found in some file somewhere in the folder?
All ideas and suggestions are very much appreciated!
Newman -
Error 404--Not Found - After Installing Essbase 11.1.2.2
Hi,
I have experienced error.
I have one box of EPM 11.1.2.2, using Windows 2008. After installing Foundation and configuring it, there's no problem at all. I can open workspace and interop as well.
However I added Essbase, installing and configuring it. But after installing Essbase, I managed to turn on Hyperion Shared Service again, it didn't work.
The error says:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
What I have done is reconfiguring Shared Service, Essbase also. But no luck at all.
Does anybody have the clue, please advise. Thanks.Hi John,
I got error like this on the log:
<Jun 15, 2012 1:06:18 AM ICT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jun 15, 2012 1:06:18 AM ICT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jun 15, 2012 1:06:18 AM ICT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
<Jun 15, 2012 1:06:19 AM ICT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 from Oracle Corporation>
<Jun 15, 2012 1:06:20 AM ICT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Jun 15, 2012 1:06:22 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 15, 2012 1:06:22 AM ICT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jun 15, 2012 1:06:22 AM ICT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
<Jun 15, 2012 1:06:58 AM ICT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jun 15, 2012 1:06:58 AM ICT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
<Jun 15, 2012 1:07:12 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jun 15, 2012 1:07:12 AM ICT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jun 15, 2012 1:07:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:07:43 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jun 15, 2012 1:07:43 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jun 15, 2012 1:07:45 AM ICT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jun 15, 2012 1:08:10 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:11 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
COMP ID = oracle.EPMOHPS
Hyperion Provider Services - Release 11.1.2.2.100.2167
Copyright (c) 1991, 2012 Oracle and / or its affiliates. All rights reserved.
connection mode : HTTP
essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
<Jun 15, 2012 1:08:12 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "JAPI" failed to preload on startup in Web application: "/aps".
javax.servlet.ServletException: Cannot initialize Provider Services server framework.
at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'APS [Version=11.1.2.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "JAPI" failed to preload on startup in Web application: "/aps".
javax.servlet.ServletException: Cannot initialize Provider Services server framework.
at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: javax.servlet.ServletException: Cannot initialize Provider Services server framework.
at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:13 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
Essbase® Administration Services - Version 11.1.2.2.100.2176
Copyright © 1991, 2012 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
US Patent Number 5,359,724
US Patent Number 6,317,750
Current time stamp: Fri Jun 15 01:08:14 ICT 2012
Server started successfully
Waiting for client requests
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:14 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:15 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:16 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:18 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
**********Getting connection from hub connection pool..Testing JNDI connection....
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "WorkflowEngine" failed to preload on startup in Web application: "interop".
javax.servlet.ServletException: DSF initalization error null
at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:19 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'SHAREDSERVICES [Version=11.1.2.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "WorkflowEngine" failed to preload on startup in Web application: "interop".
javax.servlet.ServletException: DSF initalization error null
at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:539)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1981)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1955)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1874)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3155)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:487)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:201)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:249)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:427)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:28)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:672)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:52)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:31)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:220)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:170)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:124)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:181)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:97)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1520)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
Truncated. see log file for complete stacktrace
Caused By: javax.servlet.ServletException: DSF initalization error null
at com.hyperion.cesdsf.server.framework.DsfServer.init(DsfServer.java:64)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from HSS_COMPONENT_TYPES" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
".>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <HTTP> <BEA-101216> <Servlet: "prefs" failed to preload on startup in Web application: "workspace".
EPMCSS-00001: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
at com.hyperion.css.registry.RegistryManager.initRegistry(RegistryManager.java:111)
at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:95)
at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:134)
at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:103)
at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:71)
Truncated. see log file for complete stacktrace
>
<Jun 15, 2012 1:08:20 AM ICT> <Error> <Deployer> <BEA-149231> <Unable to set the activation state to true for the application 'WORKSPACE [Version=11.1.2.0]'.
weblogic.application.ModuleException: [HTTP:101216]Servlet: "prefs" failed to preload on startup in Web application: "workspace".
EPMCSS-00001: Failed to initialize EPM Shared Services security instance. Component SYSTEM9/FOUNDATION_SERVICES_PRODUCT/SHARED_SERVICES_PRODUCT is null in EPM System Registry. Verify EPM System Registry configuration.
at com.hyperion.css.registry.RegistryManager.initRegistry(RegistryManager.java:111)
at com.hyperion.css.registry.RegistryManager.<init>(RegistryManager.java:95)
at com.hyperion.css.registry.RegistryManager.getInstance(RegistryManager.java:134)
at com.hyperion.css.CSSSystemFactory.getCSSMode(CSSSystemFactory.java:103)
at com.hyperion.css.CSSSystemFactory.getCSSSystem(CSSSystemFactory.java:71)
at com.hyperion.css.CSSSystem.initCSSSystem(CSSSystem.java:318)
at com.hyperion.css.CSSSystem.getInstance(CSSSystem.java:272)
at com.oracle.workspace.Repository$PrefsStore.initialize(Repository.java:2917)
at com.hyperion.bpm.prefs.PrefsServlet.init -
Creative folders not found after install
This a dbl post in sme ways. I by accident checked solution on my other post. Any way here is what's going on.
I found the drivers I was looking for but can't understand why this is happening. After installing I still can't see anything related to Creative when I look in ALL PROGRAMS. This means I have no icon that would allow me to change from Game mode to entertainment. It doesn't even show up that I installed the drivers in the add remove section or anywhere ion the hard drive. So even if I wanted to uninstall the drivers they're no where to be found. But here's the crazy part. My speaker icon in the task bar shows I have sound and that's it's creative.
What is up with all this. I've found the right drivers and even when I install it will say this.
Please insert disk that contains the file layout.bin
I've not expeirenced this since I first purchased the card. The funny thing here is I own about 20 Creative sound cards. Most are new from the Extreme music to the X-fi Titanium all the way back to SB LE on XP machines. All have had one issue or another with the drivers but I figured things out. With this issue I have no clue why nothing shows up. I've used driver sweeper and a reg cleaner I trust and works. I've also contacted support last night asking for help with the drivers. Funny thing is the support rep gave me the wrong ones, talk about not knowing your job. That's when I downloaded the right drivers and end up with this crap of an issue.
Would like some help from a mod please.
Window 7 Ultimate 64
i7 980x @ stock
EVGA X58 SLI
2GB of Gskill @ 600
300GB VelociRaptor-Seagate Terabyte-4 external 2 terabye
MSI GTX 460 in SLI
X-fi Fatality- original one from 05-06, the red F on the card still even lights up.. surprised
860 PC POWER & COOLING
ASUS VE278Q 27" 2ms
Logitech 5300Z 5.
G9x-G5-CM STORM GAME MAT
That's what I'm running in a nut shell. Thing is I can't understand why the cards not showing up anywhere on my C: drive which is the Raptor. Need help as I need sound. I'm a 39 old gamer and in tourneys right now. Can't have no sound or I die. Also means my team mates can'r hear my either.
Thank you.In all my years of running web sites for PC issues and modding info I've never seen one so useless at this one. Obviously you mods are employeed to look this site over and offer assistance. But as I can see your not doing your job. I can also see this place has no forum guru like most sites do. He or she is usally the one answering the questions because the mods are know where to be found.
Am I upset yes I am. This card worked the other day but after a reload of Windows not one driver works. I'm not even sure the drivers I found are the correct ones. As stated before I contacted support and was given the wrong drivers to install. In fact simple questions couldn't be answered. That leads me to believe they are not from the U.S. And if they can't understand me why even have support for the U.S. So here I sit with a sound card in a $3,500 PC that I can't do much with because I can't hear anything.
NO CONSOLE LAUNCHER
This device supported by this application is not detected. The application will exit.
Please insert disk that contains the file layout. bin
I've pt in what model X-fi I have which is SB0466 and takes me to the drivers for that card. I then proceed to DL and then install. After that I get to the panel to check for updates. While their I notice it says my card is a Fatality Champion Series. WOW that's new to me as it doesn't show that in the driver section for my card. Any way while it's looking for updates it comes back and says my card is all up to date. Really now, in the past after installing drivers it would look for updates and say these that are critical need to be installed. It really didn't say that but critical means now in my book. Those that were critical were the the console launcher along with Alchemy and some other update.
So someone please explain to me and everyone else here why Creative drivers are worse then ex wi'ves. Every time I go to instal a new creative card it's like walking into the house and seeing the now ex and knowing it's going to be a living hell. Problem we have here and I know this for sure is know one knows about these issues. I'm talking about those who monitor companies for lack of keeping the customer happy.
One more thing that is rediculous. Who set up the section for the drivers. Honestly when you go into the area the listing for X-fi can confuse some. Yes even me who has a high understanding of the ins and outs of computers. And still when you type in the model # of the card it gives you the wrong drivers... unbelievable.
Very unhappy here as this has happened way to many times with Creative. Glad were having a Tech Trade Show here In Milwaukee April st and 2nd. Companies like ASUS, Coolermaster, MSI and so on will be here. Going to ask ASUS and MSI why Creative cards don't work with their products. I'm also going to ask when has it become the norm to ignore the consumer in forums.
I'm also going to make a video of me doing the installation of the drivers. It will be for any Creative employee who wants to see that I'm not doing anything wrong. -
"Hard Disk - (3F0) BootDevice not found" after removing Windows
Hi.
I own a ProBook 4530s that came with preinstalled Windows 7 Home Premium. I'm a long-time Linux user, so the first step I took after buying it was shrinking the OS partition and installing Arch Linux on the newly created free space. I have used the notebook in this setup for something like a year now, but since I rarely even boot to Windows, I decided to gain some free space by deleting them entirely. Using cfdisk, I deleted their partitions.
After a short time (about a day), I had the machine powered down, and I found some old labelless CD I wanted to inspect. I started the computed and inserted it into the drive. It was apparent it was a Windows XP installation CD, so I turned the computer off (before it finished the phase of loading drivers).
(It's likely that the previous paragraph is unrelated to the error message, because the installation shouldn't even touch the disk at that phase. I also don't reboot often, so I'm not sure whether did the computer boot between deleting the partition and booting the Windows XP CD.)
The next time I tried to boot the PC, I was greeted with "Hard Disk - (3F0) BootDevice not found". All HP diagnostics were OK, and when I instructed the GRUB on an Ubuntu live CD to boot into my hard drive, it booted normally.
I admit the BIOS might be somehow confused by the partition table I have, as it begins with a lot of free space and has no NTFS partitions, but I believe BIOSes shouldn't be dependent on the OS I run. So, I have a few questions:
Does the HP BIOS try to detect Windows, and does it do anything differently if it doesn't find Windows on the hard drive? I googled around, and didn't find anyone with experiences running just Linux on my notebook (just dual-booting...).
If it does, is there some way I could convince it to boot into the hard drive even through it doesn't have Windows on it?
Thanks.
This question was solved.
View Solution.I see the same error but my situation still allows me to boot up but only with the secondary HDD in the DVD writer bay. For more details, please see an existing thread on http://h30434.www3.hp.com/t5/Notebook-Hardware/Hard-Disk-3F0/m-p/1670523#M76013.
I am suspecting that it has something to do with BIOS not reading the MBR or something.
Have you sorted your issue on this yet?
Cheers -
Menu00F9 not found after company language change
Hi everyone, something about this problem? Changing then user language (form the General Settings System-Form), SAP restarts the system (all forms are closed), after that any access to the user menù fails.
This is my code:
dim oSBOMenus As SAPbouiCOM.Menus
oSBOMenus = oCompany.Menus
oSBOMenus.item("3072) ' The Stock Management Menù"
At last SAP show this error "Menù not found"
Note: This code has non problem the first time, when the Environment starts.
Thanks to all.
FlavioHI Frank,
As i show you, my code has no problem the first time. Im using SP1 PL9. I can solve the problem with the UserMenuService object like this:
'Dim oUserMenuService As SAPbobsCOM.UserMenuService
'oUserMenuService = DirectCast(o, SAPbobsCOM.UserMenuService)
'Dim oUserMenuParams As SAPbobsCOM.UserMenuParams
'oUserMenuParams = DirectCast(oUserMenuService.GetDataInterface(SAPbobsCOM.UserMenuServiceDataInterfaces.umsdiUserMenuParams), SAPbobsCOM.UserMenuParams)
'oUserMenuParams.UserID = 3072
'Dim oUserMenuItems As SAPbobsCOM.UserMenuItems
'oUserMenuItems = oUserMenuService.GetUserMenu(oUserMenuParams)
The UserMenuService works fine, but the SAPbouiCOM.Menus has some problem. Id like use both in the future (all my add-ons used the SAPbouiCOM.Menus)
Thanks
Flavio -
[SOLVED]: gnutls not found after LXDE install attempt
After issuing the following command as root:
# pacman -S lxde
many console messages ensue, among them:
error: failed retrieving file 'gnutls-2.8.6-1-i686.pkg.tar.xz' from mirror.rit.edu : Not Found
This message is repeated for each of the other five mirrors in my list.
All the other packages seem to have been retrieved all right.
At the end of the process, the following messages appear:
warning: failed to retrieve some files from extra
error: failed to commit transaction (Not Found)
Errors occurred, no packages were upgraded.
I tried
# pacman -S gnutls
and got the same results as above, with the same version number in the error message, and the same three messages at the end.
I searched for gnutls in the package database, and found gnutls to be at version 2.10.4-1 .
I have searched the Arch wiki, forums, and beginner's guide for this issue, with no success, and have tried Googling the Web with various combinations of the words arch, lxde, gnutls, and "not found", also with no success.
This is my first attempt at installing Arch, but not my first experience with Linux. All has gone well up until now; the Arch CLI environment has been functioning well.
[eof]
Last edited by champted (2010-12-20 22:18:55)Thankx for your fast reply.
Name : pacman
Version : 3.4.1-1
URL : http://www.archlinux.org/pacman/
Licenses : GPL
Groups : base
Provides : None
Depends On : bash libarchive>=2.7.1 libfetch>=2.25 pacman-mirrorlist
Optional Deps : fakeroot: for makepkg usage as normal user
curl: for rankmirrors usage
Required By : None
Conflicts With : None
Replaces : None
Installed Size : 2244.00 K
Packager : Dan McGee <[email protected]>
Architecture : i686
Build Date : Fri 03 Sep 2010 09:12:12 PM EDT
Install Date : Thu 16 Dec 2010 01:34:01 PM EST
Install Reason : Explicitly installed
Install Script : Yes
Description : A library-based package manager with dependency support
Maybe you are looking for
-
Can anyone tell me how to slow down a commercial track in Garage band 10.00 I was able to do this in the earlier version of Garage Band quite easily and it is a good tool for being able to teach new dances, but I find I am unable to do it in the new
-
Install the Secure Document Plugin for Adobe Acrobat Reader
I'm trying to view secure PDF files downloaded from an organization of which I'm member. My computer is registered with their site as I have linked my computer to my subsciption with their organization. Viewing PDF files downloaded from their site ha
-
Why does ipod does not allow to download free app free??
My Ipod touch does not allow to download anything that is free or paid apps on my ipod. even if an app is free it asks for verification which directs me to payment gallery how come this is happening if an app is free it should not charge me it should
-
Lumia 520 setting is not opening.
I purchased 3 months ago. All things was working but now setting is not opening to set up anythings like updates location...etc. I really suffering from phone, What should I do to solve the location bcz I need maps and roads.
-
I've put videos on my iPod, but whenever i go to view them the screen goes all pink and yellow and striped. and i can't hear anything. sorry if this is a repost of a different thread.Somebody please help me with this...