SBIW for Porject Systems datasources for 0PS_C02

I am looking for an explanation how to configure the objects under the following path
SBIW
Settings for Application-Specific DataSources (PI)
Project System
Project System Dates,Durations,and Floats in the BW
Installing business content for this cube has been fairly easy up until this step and I have been unable to find clear instructions for what, when, how, or why this is done. Any assistance or identification of documentation would be greatly appreciated. I have the D12 Project System - Dates documentation guides for all releases already.
Thanks

The documentation I found on BWEXPERTS online and best practices site states:
For these extractors [0PS_DAT_*], you need to go to BW Customizing (SBIW) ...... to describe the settings, duration and buffer. This has two steps:
1) Create new combinations of the InfoObjects Value type etc
2) Choose which date field of an R/3 master table is built through a given characteristic vector in BW.
I have been unable to find an explanation for these two steps which include 8 steps in config in SBIW. I don't understand whether or not i need to perform some or all steps and would like to find something that explains in detail what is the result of performing and using this config.
Let me add that we are on SAP 4.7 (620) with BW 3.1 currently have installed support pack stack including 19 - 23 in our dev box where I have been testing these objects.
Thanks so much for your comments

Similar Messages

Discount for the system / not for the components

At our case, the company sells machines. Some of the machines are systems which are made up with the combination-assembly of other machines. These systems are created-presented on SAP by an upper level material. There is no pricing fpr these upper-level machines-systems. There stand material BOMs which are created by the code CS01 for those systems. The price of those systems come from the sum of the price of the components. As I mentioned before, there is no price for the system and the system's material code itself. Thisis provided by the item type customizations. We want to make a specific customer discount when the customer buys a system. This means that a discount will be valid for the components when only they are bought as a part of a system. But if they are bought one by one we don't want make discount. We want to make discount for system sellings. How can we do this?
Thanks in advance.

Hi Yasar,
Take Header pricing discount conditions
1.HA00 if you are giving discount in % or
2.HB00 if you are giving discount value based.
If you take Header conditions you need to enter the discount manually at sales order.
Other process is you take condition type K004 and maintain condition record for that Header material (System).
I hope your requirement will be solved.
Regards,
Murali.

Project System Datasource for Tendering process

Hi ,
My client wants to see some reports based on contracts/tenders like when contract was floated and when it was closed .
Can you please guide me to datasource from where I can get this information.
Regards
John

Hi ,
My client wants to see some reports based on contracts/tenders like when contract was floated and when it was closed .
Can you please guide me to datasource from where I can get this information.
Regards
John

Delta not working for a Z Datasource for CRM Services

Hi Experts,
I have created an exact replica of the standard CRM Service Datasource 0CRM_SRV_PROCESS_I and named it as ZCRM_SRV_PROCESS_I by adding a field and populating it using a BADI.
I have initalized this datasource from BI for delta.
Now when I create or change a service order, the delta does not get picked up.
I checked RSA7 and the ZCRM_SRV_PROCESS_I is active.
Have I missed anything?
In my hey days (about 3-4 years back) we use to set up the population (schedule) of the delta queue by V3 update using the cockpit (i think LBWQ).
In CRM are there any other ways?
Please help?
Thanks and Regards
Raj Jain

Hi Pramod,
SMQ1 will only show an entry, when there are available data for the delta queue, i.e. someone has made a change or added new data.So checking RSA7 and SMQ1 will give the same result, if RSA7 shows more than 0 entries.
The problem may be the init. What init did you do: an init with data, or an init without data, or an init with a filter. Experience with our CRM system tells me, best way to initialize any CRM data is to do a full data init (without filter) or a init without data (without filter). I wonder about the FULL load you mentioned ? When did you do it ?
Kind regards,
Jürgen

GRC 10.0 SP14 - Poblems when generating rules for logical systems

Hello Experts!
We recently updated a DEV system to SP14 and we're having issues regarding the rule set generation. I'd like to know if you have faced a similar problem after installing SP14. The details are described below:
Create a test function ZTEST_F1
The action PFCG is associated to a Physical System (Test Connector SP14) and to a Logical System (Sistema Logico Retail)
The logical system contains D05 among other connectors:
And it’s defined as a logical group:
The connector “test connector Sp14” points to the same system as D05.
Now I create another function, let’s say ZTEST_F2
Now let’s define a SoD Risk ZTSTSP14
Generate rules and after that we check GRACSYSRULE table for such risk and we get:
Let’s add more transactions:
Generate rules:
Now in the table we get:
The logical system has been added to the GRACSYSRULE table for the new combination and also the physical system TST_D05, but there's no combinations for the system D05 for example.
Now if we run SoD analysis:
We have four combinations for the physical system TST_D05 but only two for D05 that belongs to the logical system:
Do you have any clue? have you faced a similar problem?
Thanks in advance.
Cheers,
Diego.

Hello Collen!
First of all I want to thank you because after aplying the note the rules generated fine and now the Risk Analysis is OK for the example described above:
I've also tested with a huge number of risks and made a comparison between the results of the Physical conector and the Connector that belongs to a logical group and I got the same results as action level as well as Permission Level as expected.
Regarding the note itself, we usually check for notes and we have implemented many notes in advance related to rule generation issues.
The point is that, as my point of view is just not acceptable to get a new SP with this kind of issue. Rule generation is a core functionality and SAP must test such functionalities before releasing a SP and these checks cannot rely on the customer. For me, rule generation issues in GRC are just unnaceptable. I can accept issues with other modules or new functionalities, but with role generation they must guarantee that it works properly and perform the requiered tests before releasing an SP.
Well... bottom line the issue has been resolved and I really appreciate the help you provided!!!!
Many Thanks!!!
Diego.

Idoc Error: Could not find code page for receiving system

hi,
I am facing the following error while processing Idocs.
ERROR: Could not find code page for receiving system
Diagnosis
For the logical destination BWFIN, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Can somebody suggest a solution for this. I have verified that the RFC destinations have been created both on the sender and receiver, ports (WE21) have been defined, and partner profiles (WE20) also created. How would I troubleshoot this problem?

Hi,
I did analyse on this issue.It is all because of the Langauge settings in the SM59.This can be done by the BASIS person.The Language field would be empty, but when ever we send the IDoc from the unicode to a non unicode system we have to mention the Langauage used.
If this helps you really award me the points.
~Katty

How to Hold/Block the messages in PI for particular system

Hi,
I want to know the way of holding/blocking the message in PI for particular system. For other system message flow should happpened normally. My Scenario is,
R3->PI->SRM. For connection between PI and SRM we are using proxy. We are going to upgrade our SRM system. During that time there should not be any message flow to SRM. All the message needs to be blocked in PI. Once the upgrade over, we will restart all the messages.
There are lot more system connected to PI. There should not be any interupt on that, message flow should happned normally for other system except SRM. Only the message going to SRM should be blocked.
I found one way, by locking the user which used in communication channel for SRM system. So all the message will be failed in PI with Authentication error. After upgrade we can restart the message.
Is there any other standard way to hold/block the messages which are going to particular system??
Regards
Baskaran K

Hi,
> I found one way, by locking the user which used in communication channel for SRM system. So all the message will be failed in PI with Authentication error. After upgrade we can restart the message.
By locking user or giving wrong password to RFC destination in PI or by giving wrong business system in Receiver determination we can stop the messages in PI. But those failes messages are available for only few days in SXMB_MONI based on the BASIS settings.
But I don't think this is the best way, we have other alternative is we can save those files in one folder, after upgrade by using some other scenario we can process the files.
Regards,
Venkata Ramesh

System configuration for ESS/MSS Implementation

Hi,
I am stuck while configuring the systems for XSS configuration. I have completed following:
1) Installed Portal 7.00 (based on NW2004s) which uses the backend ERP2005 system as a User Master source.
2) Implemented the business packages for ESS 1.0 (SP6), MSS 1.0 (SP6) and SAPPCUI_GP 600 (SP6).
3) Configured the SLD ( we have SLD running on a separate XI system)
4) Configured JCO destinations (tested ok).
5) Configured Systems for Portal and the ERP systems with system aliases.
    For Portal System:   I have only configured the WAS properties (i.e. hostname, path and protocol).and User management (using UDIPW as the logon method)
The system alias is SAP_WebDynpro_XSS
    For ERP System: I have configured connection, user management and W.A.S. properties. The system aliase is SAP_ECC_HumanResources
However, when I perform the connection tests for both systems, they both fail for "Connection Test for connectors" test. It gives the message "Connection failed. Make sure the user mapping is set correctly and all connection properties are correct".
Any help is greatly appreciated.
Regards.

Hi Kristoffer,
I have tried as per your suggestion but it still gives an error.
The connector properties for my ERP system are as below:
Application Host : C1BL1 (also included the domain)
Gateway Host   : C1BL1
Gateway Service : sapgw00
Logical System Name   : ER1CLNT210
Remote Host Type - 3
SAP Client   : 210
SAP System ID (SID) : ER1
SAP System Number : 00
Server Port : 3200
System Type - SAP_R3
System aliases for ERP system are:
SAP_ECC_HumanResources and SAP_R3_Financials.
I have not maintained any W.A.S. properties for this system.
For my Portal system: WAS properties are:
Web AS Description : EP_Portal
Web AS Host Name : C1BL3:50100
Web AS Path   : /webdynpro/dispatcher/
Web AS Protocol - http
I had not maintained the connector properties for this system before, but I have now maintained as following:
Application Host : C1BL1 (also included the domain)
Logical System Name   : ER1CLNT210
Remote Host Type - 3
SAP Client   : 210
SAP System ID (SID) : ER1
SAP System Number : 00
Server Port : 3200
System Type - SAP_R3
The system alias for EP is: SAP_WebDynpro_XSS
In the UME configuration --> User mappings, I am using SAP_ECC_HumanResources system as the reference system.
Please let me know if you need more info.
Regards,
Nilesh

Showing Grey Colour on EWA session only for PI systems

Hi,
I have a strange issue when I try to generate EWA report for PI systems. For all other systems the reports are generated fine and in PI systems are exactly the same configurations as in other systems. I want to let you know that in PI systems in SDCCN there I have scheduled Sessions Refresh with target RFC destination SM_<SID>CLNT000_BACK (Solution Manager) and Maintenance Package with target RFC SM_<SID>CLNT000_BACK (Solution Manager). After Maintenance Package is running this generate one session number being send to Solution Manager. I think the configurations in satellite systems are ok (PI systems), but in solution manager after I start to process the data I get one report generated with grey color and only two pages. Do you know which will be the reason? Also I checked note 727998, and this didnu2019t help me.
Thank you,
Kind regards,
Florin Radulea

>
Florin Radulea wrote:
> Hi Paul,
> Thank you for your response.
> I checked those notes but my problem is because these systems (PI systems) are not able to generate EWA reports for ABAP stacks. There is not needed to generate reports for JAVA stacks. I want first to generate reports for ABAP stacks. I mention that in SMSY I set PI systems as being as ABAP also.
> Can you also give me another advices?
> Thank you,
> Kind regards,
> Florin Radulea
Dear Florin
You might want to review the following note :
1322899 EWA incomplete after importing EHP/product incorrec
Regards
Amit

Dynamic system resolution for portal published BI content

I have a Dev-Tst-Prd ABAP stack BI landscape with a corresponding Dev-Tst-Prd Java stack portal landscape.
My BI developers create reports and webdynpro applications which are then published to our portal and made available via iViews. These iViews refer to the target applications via URLs which contain hardcoded hostnames and port numbers. This makes it a pain when portal content is transported from Dev to Tst and then to Prd.
All my BI systems are known by the SAP_BW alias. I have a different system definition in each portal for the SAP_BW alias pointing to the corresponding BI backend.
Can I use dynamic system resolution for this? If so, how?
I want a URL like http://<devhost.domain>:<devport>/sap/bc/webdynpro/sap/appname to be transportable. Obviously if that starts out as http://dev.mycompany.com:8100/sap/bc/webdynpro/sap/appname, it won't work when it arrives in tst where it needs to be http://tst.mycompany.com:8110/sap/bc/webdynpro/sap/appname. If I could store the URL as something like http://<%JSP SAP_BW %>/sap/bc/webdynpro/sap/appname this could be transportable if there was something in dynamic system resolution to resolve the variable appropriately at runtime in each system.
As a Netweaver administrator, rather than a portal developer, I'm a little lost as to where to even start.

Success! Thank you for your help.
What finally worked?
Create a Portal Component iView of type com.sap.portal.appintegrator.sap
Set URL Template to http://<System.wap.ITS.hostname>/sap/bc/webdynpro/sap/zcs_wd_cc_app
Set System to SAP_BW (where SAP_BW is an alias for the System entry for the system where we want the WebDynpro app to run)
Where did the help come from?
SDN (Mr Nicholls in particular)
SAP Help (http://help.sap.com/saphelp_nw70/helpdata/en/21/dfd241cb76c417e10000000a155106/frameset.htm in particular)
Where did the parameter value reference come from?
The "wap.ITS.hostname" attribute name came from the portal's system definition for SAP_BW. Under System Administration -> System Configuration -> System Landscape -> Portal Content the entry for the SAP_BW system can be displayed. In that system entry there is a field labelled SAP ITS host which contains the fully qualified hostname and port number for the ITS server delivering my application. Expanding the detail of this field (click the arrow head beside the name) shows its Property ID to be wap.ITS.hostname.
So this last answers my earlier question about where to find the valid contexts and attributes per context for the variables to substitute in the URL template. The contexts are the names of the fields available to configure the iView, the attributes are the Property IDs of the relevant information fields in the obect described by the context.
Note: This solution ended up only being required for WebDynpro content. The generated URL for WebDynpros appears to resolve any load-balance ITS URL to a specific host and port before publishing, the method here leaves the resolution until runtime - a great advantage in performance and flexibility.
The Web Application Designer published report content was generated in a transportable form already.

Roles for the System user

Hi All,
Currently, I am working on AII 5.1 Slap and Ship Outbound scenario and got the document from the service marketplace under http://service.sap.com/rfid -> SAP AII 2007.
Under Activating HTTP Services(Page no: 9 - 9th step) section , we have to provide the System user. May I know what all roles we have to assign for that user?
Regards
Sara

Hi Sara,
We need to use a System/Communications User in there. Though there is no clear thought on what authorizations are required for the same.
You can ask your basis guys to give a Systems user for restrictive access. This might be based on the policy of the basis team of what auths are generally given for a System user for a restricted use. You can use the same.
If this causes problems you can assign the user, the AIN related admin roles mentioned in the same document. This will work.
I have created a user called ALEREMOTE which is of the type Communications data with profile assigned SAP_ALL. This works for me perfectly.Though if you want you can give in a restricted access to as i have already mentioned.

Hi what does this mean and what do I need to do?....You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.

Hi what does this mean and what do I need to do?....You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms.

well not sure of what the problem is besides you running an operating system that adobe cannot work with. reply with that type info ie I am running windows xp home or OSX version 7.5.3 etc. Meanwhile here is the link for minimum system requirement for adobe's creative cloud products System requirements | Creative Cloud that should help. good day

Cannot find official hardware system requirements for a pc running app-v client on W7

looking for
hardware system requirements for a pc running app-v client on W7
Thx.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Hello,
Did you attempt to google for "app-v 5 system requirements"?
http://technet.microsoft.com/en-us/library/jj713426.aspx
Nicke Källén | The Knack| Twitter:
@Znackattack

Using system fonts for commercial printing?

Hi,
Does anyone know the licensing rights/usage for using system fonts for commercial printing? If I understand correctly, system fonts that comes from operating system CAN be use because Apple purchase the rights on them and end users that purchase OS can use these fonts freely as long as not we are not redistributing them for profit, etc.
Can anyone point me in the right direction with official documentation on the subject?
Thanks!

Never mind, I found the answer. It's in Apple's OS EULA.
"E. Fonts. Subject to the terms and conditions of this License, you may use the fonts included
with the Apple Software to display and print content while running the Apple Software; however,
you may only embed fonts in content if that is permitted by the embedding restrictions
accompanying the font in question. These embedding restrictions can be found in the Font
Book/Preview/Show Font Info panel."

ERROR - no available datasource for source system exist

I tried to load the master for 0Bill_Type
1) Install infoobject business content and Create infoobject
2) Activate datasource in R/3
3) Replicate datasource
4) Assign infosource ---> the error said no available datasource for source system exist
When I go to source system--> Object overview --> I don't see anything at all?
Please advise what went wrong ?

Hi Pandadda,
I think you have not transferred the APPLICATION COMPONENT HIERARCHY yet. If not, then do the following:
1. In your R/3 system execute TCODE = SBIW.
2. Go to BUSINESS CONTENT DATASOURCES
3. Execute TRANSFER APPLICATION COMPONENT HIERARCHY by clicking the CLOCK.
Replicate you datasource then check it on your BW system
R,
Adwin

SBIW for Porject Systems datasources for 0PS_C02

Similar Messages

Maybe you are looking for