SBL Vista RC2 32-Bit. help plea

Hello All,?I have a problem with my sound card its pretty old but I was worndering if anyone had the driver for it's its a, Sound Blaster Li've! Value. (model number is: CT4670) I have Windows Vista RC2 32-bit version installed on to my computer and I do have the disk for the soundcard but everytime I install it it misses up my computer and has a bunch of errors to where I can do anything like, Copying files or going into my Device Manger, dosent let me play games, stuff like that.. So can someone hook me up with the driver? I would really like to have the driver I cant really find it anywhere so I thought id post here ?Well Thank You All ?Silver-Blade

yeah because windows vista driver is different than XP
they need to rewrite it but am not sure if they going to support 8 years old hardware
bye

Similar Messages

  • Developer 10G installation on vista HP (32 bit),help plz!

    hi!
    ok, i installed database 10G release2 & then tried to install developer 10g (10.1.2.0.3). after checking the requirements in DOS type mode, i received this error:
    "invalid staging area. there are no top level components for windows NT. windows 2000available for installation in this staging area."
    am i missing something really need consideration or sometthing else. please guide me how to install that on vista operating system (32 bit).
    thanks.
    sohail.

    See the thread at Re: Forms 10g installed and running on Windows Vista

  • Live 24-bit Help, ple

    Hello! I've recently woke up to windows doing an Automatic Update. Shortly afterwards, the sound card stopped working. It was a Realtek Ac97, built into the motherboard. I tried removing the drivers, and then re-installing, with no luck. No matter what I did, the "Audio Settings" panel would always say "No audio device" even though it was there and the drivers were installed.
    I just bought a Li've 24-bit Soundblaster, and after I removed the Realtek's drivers, AND disabled it from the BIOS, the SB doesn't work. I've installed everything, with the full installation, and I have the same problem: "No audio device." The drivers seem to be installed fine. I've uninstalled them, and then re-installed them 3 times tonite, with no luck. I've done clean boot (don't know why, but I saw it somewhere on here, so I did it).
    The computer is:
    AMD AntholonXP
    .2ghz with 52mb of ram
    Windows XP with SP2
    I don't have anything special on it, this is just the "family" computer of sorts. I've checked for any IRQ's conflicting and the answer is no. I'm really frustrated with not having any sound and not being able to fix it. Please help!!! thanks,
    shawn-peter

    shawnpeter,
    It sounds more like a problem with your current Windows. There could be certain corruption on places within the OS already. You could also check whether the 'Windows Audio' service has been enabled as you will need this service to be running in order for audio to work.
    Run the command 'services.msc' to access the Service Window.
    JasonMessage Edited by Jason-CL on 09-3-2005 2: PM

  • Vista RC2 64 EFI

    I am waiting for delivery of my new MacBook Pro. I am supposed to get it November 3rd and cannot wait. I was wondering since the Core 2 Duo chip is 64 bit and the Vista RC2 64 bit is EFI capable, could this version of Vista be installed without boot camp. Has anyone tried it yet? Or am I misinformed about Vista RC2 64 bit having EFI. I know the 32 bit version does not have it for sure.
    Waiting for Delivery of MACBOOK PRO 2.33 C2D   Mac OS X (10.4.8)   160GB HDD 2GB RAM Glossy 15.4" screen

    1) Core 2 Duo is 64bit
    2) Vista does not support EFI, 32bit or 64bit flavors
    3) You would have to find your own drivers as the Apple supplied drivers are 32bit only and will not work with 64bit Windows.

  • Thinkpad X200 Vista Business 32-bit Wireless network problems

    Hey guys!
    I seem to have a persistent problem with my two Lenovo Thinkpad X200, which I simply can't manage to figure it.
    I have recently restored the computers to factory settings, which meant downgrading from Windows 8 to Windows Vista Business 32-Bit.
    Now, everything with the installation went as planned until I had to test if everything was working. A lot of the drivers seem to be missing and since I do not still have the original manufacturer's disc, I do not know what to do.
    I downloaded the ethernet driver from Lenovo's website and that is now fully functional.
    I have also tried everything in regards to making the wireless internet work, but without any luck. When I try connecting to the wireless internet, Windows simply can't detect any networks and when I try using Windows function to find a solution to the problem it simply says "This computer does not have a wireless network adapter installed and configured".
       I have tried downloading all the wireless lan driver for Windows Vista 32-bit from Lenovo's website, but I still cannot get the wireless network to work.
    Any help would be highly appreciated
    Thank you in advance 

    Does the wireless LED light up?
    Try Fn+F5?
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Installing Windows Vista Ultimate 64 bit on Bootcamp issue

    Hi I'm a newbie, I would like to install Windows Vista Ultimate 64 bit using boot camp. I went into boot camp to partition and split the 1 terabyte hardrive. half is for Leopard, the other half is for Windows Vista.
    I followed the steps and popped in the disk, awhile later I get a message saying "Where do you want to install Windows?"
    It's showing:
    Disk 0 Partition 1 200 mb primary
    Disk 0 Partition 2 466 gb Primary
    Disk 0 unallocated space 128 mb
    Disk 0 partition 3 Boot camp 464 gb Primary.
    which ever one I click on it says "Windows Cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS"
    I can't get passed this part, what do I do?
    Any help is greatly appreciated

    Hi Stuart,
    Vista needs its system partition to be formatted with NTFS.
    The BootCamp Asistant does a pre-format with FAT32 since OSX can not write to NTFS partitions (only read).
    Therefor you have to reformat the Windows partition with the Vista Installer to NTFS.
    See page 11 of the BootCamp Setup Guide found here http://www.apple.com/support/bootcamp/ (and it's also part of the BootCamp Assistant).
    Regards
    Stefan

  • LCES 8.2 Turnkey Install on "Intel Core i7  CPU 920 @2.67GHz 3GB Ram  Windows Vista Home 64 bit"

    Installed Java 1.5 SE (jdk-1_5_0_16-windows-amd64.exe) then set JAVA_HOME in system variable and set path to JAVA_HOME\bin etc.
    During the Turnkey installation process in the LC Configuration Manager screen, process gets stuck with ACL-LCM-999-032 error.
    Log from Configuration Manager is below:
    Also I can not start the Windows service from Services , tried to set user too to use to start the service but no success please help, I can not proceed further.
    Note: I downloaded jboss-4.2.0.GA fresh just to check if I can atleast start the default Jboss container on this machine and I can "run -c all" with no error.
    Thanks
    -yog
    [2008-11-28 21:18:34,910], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressModeDialog, Sub Task Progress: [57%, Verifying ports required by service JBoss for Adobe LiveCycle ES are available]
    [2008-11-28 21:18:41,925], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressModeDialog, Sub Task Progress: [59%, Starting service JBoss for Adobe LiveCycle ES]
    [2008-11-28 21:18:52,173], INFO, Thread-28, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Express mode processing complete
    [2008-11-28 21:18:52,173], INFO, Thread-28, com.adobe.livecycle.lcm.feature.deployment.DeployDSCs, Express task finished, true:false
    [2008-11-28 21:18:52,173], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressTurnkeyTask, Progress: Task[0, null] Step[100, 1/2 Express steps complete]
    [2008-11-28 21:18:52,189], INFO, Thread-28, com.adobe.livecycle.lcm.feature.expressTurnkey.ExpressTurnkeyTask, Progress: Task[0, null] Step[0, ]

    I able to successfully installed LCES 8.2.1 on i7 CPU 920 @2.67GHz 6GB Ram Windows Vista Ultimate 64 bit with Oracle 10g (on same PC)
    it takes about 6 min to start the JBoss ( I wonder why 6 min but happy atleast passed the installation step) without BAM deployed.
    Yog

  • Bootcamp: Sound not working on Windows Vista Ultimate 32-bit

    Hello everyone, I've got quite an unsual problem (whell at least I think anyway). On my iMac (Mid 2008, 2.4Ghz C2D, 2GB ram, 2400XT), I recently installed Windows Vista Ultimate (32 bit). I've been using the sound out of the speakers, until now when I decided to connect some extenal speakers. I have the bootcamp drivers installed (from Snow Leopard DVD). When I plugged the headphone jack into the headphone socket on the back, I noticed that the sound was still coming out of the speakers, so I opened the preferences and it showed that I had something plugged into the line-in jack- which I didn't! I removed the headphone jack from the headphone socket and plugged it into the line-in. Nothing changed in the preferences. So basically, Windows thinks the line-out port is line-in! I would appreciate some help with this issue, not sure how common it is!
    Thanks :-)

    Hi I'm not sure if this is going to help but have you got the service pack 1 installed on your laptop as when I installed it on my desktop the first time it caused blue screen errors and gave me loads of problems including error messages that seemed to come up with every application I opened and an annoying driver IQRL equal or less than but couldn't work out why and then in the end I had so many problems I had to totally reformat my desktop and I removed my XP scanner and webcam(both had vista drivers) and when I reinstalled the service pack 1 it was fine, so do you by any chance have anything attached to your laptop that was XP and has vista drivers as these seemed to be what was causing my errors.
    Also a question about your graphic card drivers, I've got the same laptop as you and was looking for the graphic card driver updates and couldn't find them anywhere on the site, where did you find yours? I'm using Vista Home Premium 32 bit , my model number is A200-28P(PSAE6) and I'd love to know if there is a newer graphics card driver but can't find it on the knowledge base so the fact you've updated yours would you mind pointing a new user in the right direction :-)
    Thanks,
    Simreaper

  • Problems in Vista RC2

    I installed the PC Suite in vista RC2 and evrything seems to work fine except for backup. Evrytime I try to backup it crashes at 60%. I keep getting the error that connection is lost. Resetting the phone to factory defaults doesn't seem to solve it. Anyone else have the same problem?Message Edited by diablo_lk on 28-Dec-2006
    01:52 AM

    Proxie_dk,
    Also,
    You might want to make sure that you have done the following to try and help resolve or workaround the problem more:
    Make sure you have set the correct timinns and voltages for Mushkin memory in BIOS, more information at Mushkin website under support.
    Make sure you have the latest version of the BIOS for your motherboard, as several manufacturers did release updates for the problems with NVIDIA and Creative compatability. Look at support section on the XFX support site.
    Make sure you are using the latest motherboard chipset drivers available from NVIDIA. 5.25 is the latest, and the international package is here.
    Make sure you are using the latest graphics drivers available from NVIDIA. 86.8 is the latest, and the international package is here.
    Also, perhaps not as important as the above, make sure you have the latest Windows Updates installed using Microsoft Update.

  • SQL Developer 1.1.2.2579 will not start in Vista Ultimate 64 bit

    I have tried both versions of 1.1.2.2579 (with JRE/JDK and without). Both versions give me "The application failed to initialize properly (0xc0000018). Click OK to terminate the application." Build 1557 seems to work fine on the same machine (with UAC off. I have not tried it yet with UAC on).
    Here are some machine details: MS Windows Vista Ultimate 64 bit, default JVM Sun 1.5.0_11 [Java HotSpot(TM) 64-Bit Server VM (build 1.5.0_11-b03, mixed mode)]. Since other folks had some problems with UAC I disabled that to see if it would make any difference. I get the same result with or without UAC when I try to launch the application normally. With UAC on and using "run as administrator" I get nothing at all. That is I get no error but the application never actually launches either. It doesn't appear to do anything at all.
    The version of 1557 that seems to work fine is the one with the JRE.

    And???
    We can't help you if you don't tell us what you tried
    and what happened when you tried it.This is message when try run on vista ultimate x64 "The application failed to initialize properly (0xc0000018). Click OK to terminate the application."
    you can help??? what is happen???
    finally sql developer run or not run on vista x64???
    p.s.: excuse-me... i don´t write in english very well.... waiting replies!!!
    thanks!
    Message was edited by:
    user571753

  • ITunes won't install on Windows Vista? 32 bit

    I have Windows Vista (the 32 bit) and after I got an iPhone I tried to sync it to my iTunes. But it said I needed a later version of iTunes (I had version 9.something). So after I downloaded iTunes 10.2.22 or whatever, whenever I tried to open iTunes I got a message that said, "ITunes did not install correctly". I uninstalled and did it again, only to get the same message. Help?

    I have Windows Vista (the 32 bit) and after I got an iPhone I tried to sync it to my iTunes. But it said I needed a later version of iTunes (I had version 9.something). So after I downloaded iTunes 10.2.22 or whatever, whenever I tried to open iTunes I got a message that said, "ITunes did not install correctly". I uninstalled and did it again, only to get the same message. Help?

  • Vision W And Vista RC2 Connectivity Probl

    I've installed the software on the CD and CM 5.00.3 update, but when I connect the player, it tries to install the driver, asks for the cd and still can't find it and that's as far as I get, nowhere.
    The player is fully charged and I can't see how RC2 is the problem, as my Vision M used to work perfectly with it.
    Any help, greatly appreciated.
    Cheers.

    Looks like a warning for other Vista RC2 users then, don't buy a Vision W as it's obviously incompatible at the moment.
    Looks like I'll have to sell this on and get another Vision M, which is a pity.

  • Windows XP Pro (32-bit) and Vista Ultimate (64-bit) on the same Mac Pro HD?

    Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
    http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
    http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
    Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
    I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
    Any thoughts and advise are appreciated.

    Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
    As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
    I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
    When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

  • Vista Business 64-bit Mac Pro 2.66 4-core

    Hi,
    Before 10.5 release, I tried to install Vista Business 64-bit twice, Erasing and starting from scratch both times (on a dedicated internal hard drive).
    Both times I had driver issues...I eventually Erased a 3rd time and went with 32-bit.
    I learned today Apple is now supporting 64-bit at least on some later 2007 Mac Pro models.
    My 4-core 2.66 is April 2007.
    MY QUESTION:
    Does 64-bit work on a Mac Prow tower 2.66Ghz, 4-core (10gb ram)?
    (I'm not brave enough to try it on my 8-core).
    Will Windows Bootcamp SOFTWARE UPDATE give me all the required drivers -- no basic issues that would waste my time again trying to make 64bit work?
    +++++
    Note: I have the Tiger 10.4 OEM disks and a retail Leopard 10.5.0 install disk to work with.
    I also have both 64 and 32 bit disks for Vista Business.
    Is there a trick to doing this?

    I'm done for today, but there was only one trip-up, getting the 2008 64-bit Apple drivers.
    I started with Vista RC1 two years ago, and no major deal breakers in the last year or so (late '07 seemed to clear up most driver and applications).
    Format drive as MBR and NTFS (and skip using BootCamp Assistant).
    Install.
    Update.
    Install Apple drivers.
    Don't install what you don't need (I learned to avoid Norton).
    I've used Business, Home Premium and Ultimate, all 64-bit.
    If you have a 2008, then use its OEM DVD for BootCamp 2.01 64-bit, you need those sort of for HAL and stuff. The 2008 officially supports 64-bit due to its EFI64 ROM is UEFI 2.01+.
    http://support.apple.com/kb/HT1846

  • T500 with Windows Vista Business 64-bit ---- AND NO SOLITAIRE

    Does anyone know how I can get my "waiting pacifier", the very standard SOLITAIRE, that I have been playing for over 10 years? I want to install this on my Windows Vista Business 64-bit T500 notebook? I am not interested in buying a more fancy version of this.
    Richard N. Kaufman

    They're not installed by default on Vista Business edition, but they can easily be added:
    http://www.lockergnome.com/blade/2007/02/18/microsoft-windows-vista-business-edition-where-are-the-g...

Maybe you are looking for