SBLIVE 5.1 : dts drops using spdif under zoomplayer and recl

Hello there... I really need a big help.
I'm usign a personnale HT PC done with athlon 2800 XP, gforce 5200 and SBLIVE 5..
I plugged SBLIVE using spdif out connector to my sherwood R-945 ( DTS, DD, DPL ... ). Everything works fine under Dolby Digital 5. sound, except maybe some tearing and bypassed it using reclock.
Ok.
So I tried DTS sound, the sound seems to be really great ... except of : some drops which happens really randomly ... using again this spdif connector ..
Can someone have or had the same problem and found a solution ( drivers ... firmware ... configuration tools ).
Thx a lot,
Cyril

same here. Win7 media player isn't allowing me to go into "Advanced..." options to edit SPDIF settings, and VLC player SPDIF isnt working either.
The other strange thing I've noticed is that previously (in Vista64) I would only receive output to the optical when I specifically instructed applications to do so; however now in Win7 64 drivers I'm getting output to the optical from audio intended for 6 channel analogue. It seems like there's an option that is patching audio for the 6chan out to optical out. I am still getting output on the 6channel, but it is also goes to the optical.
This is a fresh install of Win7 64 and installed the SBXF_PCDRV_LB_2_8_003.exe drivers.

Similar Messages

HT1399 my ipod says i got alot of my memory used up under other and i would like to know how to delete it so i can add more music

My ipod says i got alot of my memory used up under other and i would like to know how to delete thid stuff so i can add more songs.

You need to delete the music you got from your friend. You fried does not have the licence/right to give you a copy of it.
I would restore the iPod from a backup on your computer and sync your own media to the iPod.

Dd, gzip using split under Arch and FreeBSD ?

Hello Archers,
Not sure where to post this question so I'll try here. Would anyone know the FACTS why the command below runs super fast under Arch-2009.08 and Fedora-12 but runs very slow under FreeBSD 8.1?
Notice; I did not not specify a block size for neither OS, so according to the DD documentation it is reading/write 512 blocks at a time from an unbuffered device and as you see ARCH runs like a bat-out-of-hell, regardless.
The only thing I figure is ,,, ARCH-LINUX must be bumping up the default size with-out the user knowledge when no size has been specified by user. Would this be true?
I notices this tooooo many times in the pass but this time I documented it for proof because I thought it was my imagination most of the time. I use all three OS by dual-booting when needed, and I use the same code below so they can backup each other when I make configuration changes in either OS. Machine don't matter... old or new, P3 512MB RAM or Phenom-II-965-QUAD - 8GB RAM, same results.
Same Command:
dd if=/dev/sda3 | gzip -c | split -b 3500m - /12/File-Name-dd-By-Arch-Linux.gz.
ARCH-2009 - 1,504,432,145,920 bytes - 150GB = 2118sec = 35min = 1/2 hour - 71 MB/s
dd if=/dev/ad4s3 | gzip -c | split -b 3500m - /12/File-Name-dd-By-FreeBSD.gz.
FBSD 8.1 - 1,504,432,145,920 bytes - 150GB = 16652sec = 277min = 4 1/2hour - 9033694 b/s
293,812,785 + 0 record in
293,812,785 + 0 record out

I learn that it's a BLOCK vs CHAR thing. Linux use BLOCKS.
I use ARCH to control all my HDD's ... Running GRUB and dd'ing to backup all partitions with Windows Vista, Windows-7, FreeBSD Packet filters and routers. If you use the command I posted it may have an issue if you turn on top during dd'ing a large partition. I been dd'ing with ARCH with success for over a year and will not be cash out any time soon. I just learn what to do and what not to do until it is fix. Don't mean to cross-websites but maybe the author would like to know.
Here's the story ...
http://www.daemonforums.org/showthread. … 6a2&t=5503
Last edited by sharris (2010-12-31 15:38:46)

How do i clear the drop down menu under google and other sites like that?

when i start typing "mac" on google for example it comes up with all the mac searches i've done how do i clear it??

Eric,
Open Safari and click on "Safari" (Next to "Find" in the top menu) and then click "Reset Safari..." Doing this will present you with a window asking you which things you'd like to clear. One of the options down at the bottom allows you to "Clear Google Searches." You can deselect all the options just leaving this one and click the "Reset" button. Presto... no more previous searches in Google.
I hope this helps!

Cant buy songs. can add to wish list but no buy or purchse option on drop down menu under price? Been using itunes for years. not new to this. why now?

Can't buy songs? No "Buy" option in drop down menu under price? Can add to wish list but not download to IPOD

Hey tomfromphoenixville,
Thanks for the question. If I understand correctly, you do not see the option to buy a song from the iPod. Are you trying to buy the song in iTunes on Windows or from the iPod? I would recommend that you read this article, it may be able to help the issue.
iTunes: Using the iTunes Store for iPhone, iPad, and iPod touch - Apple Support
To purchase an item from your iPhone, iPad, or iPod touch:
Tap the price, and then tap Buy or Rent.
Thanks for using Apple Support Communities.
Have a great day,
Mario

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

The Facebook app on my iPad will not let me access my account. I was recently married so my Facebook name changed and I updated my password. Now when I go into Facebook under settings and try to access my account it is still using the old name.

I got married, changed my Facebook name and gave my account a new password. Now, under settings and Facebook they have my ITunes/Apple ID and under it says "please sign in using (my old Facebook name) and under that is password. Only that old Facebook name has changed but did not update on my iPad settings. Also it will not accept my new password. I cannot erase it. If Apple doesnt want us to use more than one account, what do we do in this situation? Or if our Facebook gets hacked and becomes compromised? This is not okay. I have to be able to access this and because it will accept only one and will not update changes I cannot longer access my account. I buy a lot of Apple products. I won't buy another if it's not corrected. This is horribly frustrating. Not to mention waiting on youtube videos to load is almost as bad as waiting on dial-up. But that's another matter. Is there a way around this or do I need to start looking for products somewhere else? Anyone know? Thanks.

You need to reset the password for the "old" account, and then use that to turn off iCloud. Then you will be able to sign in with your new ID.
You can reset your password at iForgot.apple.com.
If you don't know the answers to the security questions, you will need to start there.
http://support.apple.com/kb/HT5312
-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH

Having a problem with commandButton attribute when i am using it under tabl

Having a problem with {color:#800000}commandButton {color}{color:#339966}attribute {color}when i am using it under{color:#ff0000} table{color}
I am using a command button under a table.
here is the example
<h:dataTable value="#{wlmHandler.plexes.plexes}" var="{color:#ff0000}onePlex{color}" border="0" cellspacing="0" cellpadding="0" width="100%" border="0">
<h:column>
<h:panelGrid border="0" cellpadding="0" cellspacing="0" columns="5">
<h:commandButton action="" styleClass="tixbutton" value="#{labels.ADD}" onclick="#{onePlex.tran}"/>
<f:verbatim> </f:verbatim>
<h:commandButton action="#{createTransaction.transactionCommand}" styleClass="tixbutton"
value="#{labels.SUBMIT}" actionListener="#{createTransaction.processAction}">
<f:attribute name="dbName" value="#{wlmHandler.dbName}"/>
<f:attribute name="plexName" value="{color:#ff9900}#{onePlex.name}"{color}/>
</h:commandButton>
</h:panelGrid>
<h:/column>
</h:dataTable >
when i am using this plex name atribute it is giving nullPointerException
{color:#ff9900}this value #{onePlex.name} i cant able to access inside the command button{color}

balu i have tried by seeing u r blog.
this is my structure of tables
plexes (if i iterate plexes table gives plex object)
|
------ plex (plex table gives transaction object)
|
------transactions(transactions table gives transaction table)
|
here i will have a command link to this link i have to pass the plex name which
will come from
i tried in this command action with HTMLDataTable getRowData()
i am not getting the selected row data .i am downcasting this getRowData() to plex.

I tried dowloading Skype yesterday and my Safari browser crashed. It gives the message "Safari quit while using the librooksbas.dylib plug-in. I trashed Skype but still have the browser problem. I also tried logging in under guest, and no Safari.

I tried dowloading Skype yesterday and my Safari browser crashed. It gives the message "Safari quit while using the librooksbas.dylib plug-in. I trashed Skype but still have the browser problem. I also tried logging in under guest, and still
no Safari.

Julie --
Backing up QuickTime's advice --
Unless your bank's website is insecure, you're fine. Go up to the Safari "Search" bar and type in Rapport. You'll be amazed. It may "work" on PCs, but definitely not Macs. And it's not needed for Macs.

Problem with background job using SUBMIT under different user

Hi All,
I am submitting a background job under different user name. I am submitting this job by using JOB_OPEN , SUBMIT report and JOB_CLOSE. But submit statement is returning sy-subrc 8, becuase of this the job_close is failed. Can you please help me to solve this problem.
Thanks in advance.
Tjgupta

Hi,
The user is having all authorizations. is there any difference with user types?
This user is having user type " as communication data".
Thanks,
Tjgupta

I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

The message icon is not showing in the drop screen of my photos it used to show before and now it's not there how can I get it back?

The message icon is not showing in the drop screen of my photos where it says do you want to email, message, assign, use as waller paper etc. it used to show before and now it's not there how can I get it back?

Did this back along to mine. Plug it into itunes on your pc (or Mac) and click on the ipod icon on the left hand side. When the device options come up on the main screen, click on restore. Follow the steps and it should restore to factory settings. If you had icloud activated on the ipod all previous purchases should be in the cloud and ready to download onto the ipod afte rit has been restored to factory settings, otherwise you'll have to download them all again. Hope it helped.

My ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

my ipod touch screen is totally unresponsive and i have been using it under normal conditions. ihave tried the reset and restore but to no avail.everything works as it would normally do on the screen.help pls????

Might want to post your question in the correct forum. This is the iPHONE forum.

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that informat

I have a photo of an ice surface and another of a flower. Now I want to create a merged photo with the flower lying under the ice. I understand that I shall use the function "Layer" and have even read in the manual and looked on a video, but that information is not sufficiently detailed for me. I have tried several options, but I come now way. Generally it seems that your information is only for the ones who can, not for the people who can´t although it is we who really need to learn. Please give me a step by step (click by click) information on how I can get the ice above the flower and then make the ice partly transparent so the flower is seen underneath. Please send me an e-mail Erik Solbu [email protected]

Open a new document big enough for your image. Then additional open your ice and flower image as well. Copy each and paste it into your blank document. They will be placed on their own separate layers.
Make sure in your layers panel. (Bottom right) the ice is above the flower, by dragging it in place. In that same layers panel click the ice layer to select in and find the opacity meter above. Drag to the left until you get the effect you desire.

SBLIVE 5.1 : dts drops using spdif under zoomplayer and recl

Similar Messages

Maybe you are looking for