SBLive 5.1 - Optical In quest

Hello. I have read through a LOT of forum topics (I know there is a sticky on digital vs analog connections and i've read it as well). And i understand now a lot of things i didn't before, however i've been looking for some advice on the following:
I have an SBLi've 5. platinum. came with the li'vedri've thingie, has optical in and out.
I have a 7. creative system, don't remember the model. Analog connections only.
I also have an xbox 360 outputting through optical into the Li'veDri've.
When i play games i can hear everyhting fine, as they output in stereo and it passes perfectly to the speakers, but when watching DVDs on he xbox or if i set the xbox settings to Dolby output, the sound dies.
Main question is this: How on earth (and i'm looking for *anything* that doesnt involve buying a new soundcard) can i get the card to decode the AC3 coming from the optical input? As i understand it, the soundcard *should*?be able to decode Dolby Digital / AC3 signals but isn't doing it's
Thanks everyone in advance.

#Re: 5. Optical in -> Analog outah ok.
Well, that's exactly what I did - I use the optical-in to connect my xbox360 to the optical-in on my PCIe X-Fi titanium fatalty pro sound card.
Then, I get to hear the xbox from the speakers connected to my sound card (I suppose when you say "analog jacks" you mean the speakers, am I right?).
Also, I found out I only get sound using the "Digital Stereo" on the xbox.
If you find out how to get true 5. surround, plz let me know (even though we have different cards).

Similar Messages

  • SBLive! and Optical quest

    I just rebuilt my computer and to keep it simple i bought an MSI motherboard with SBLi've! as the onboard chip. I have a SB Audigy 2 platinum and am trying not to use it. I dont care about watching movies but I do care about my music. When i have my Audigy hooked up i could have my stereo surround hooked up and going as well as my computers 5. speakers. This made it basically a 0.2 (0 speakers and 2 subwoofers). I cannot find an option to have BOTH sets of speakers going at the same time with the SBLi've! chipset. And yes i do have the optical plugged into the right hole =P So if anyone can tell me if this is possible and how to do it that would be great!

    Thanks Deathstalker! Hi from Vero Beach btw
    i had tried to use the SBLive on my board but i kept getting crackling/stuttering phases. it wasnt a loose connection or debris or anything, and i updated the bios and drivers. it still had this problem so i removed the SBlive and went back to the onboard. the problem persisted with the onboard! oddly, when i removed the promise UltraATA card that came with the WD Hard drive, the sound is absolutely fine with the onboard, and now im considering putting the SBlive back on. i had wanted to settle this issue before buying the audigy2 platinum, and i hope going to IRQ 5 helps when i get home (i bet it will). you seem to be into online gaming, would you mind putting your two cents in here?
    http://www.msi.com.tw/program/service/forum/index.php?threadid=29987&sid=

  • Optical Out Quest

    Hi,
    I'll start by saying, yes I have read the FAQ's above, but they don't seem relevant to my problem.
    I've recently purchased an Audigy 2 Platinum EX. I wanted to connect my PC to my Dolby Digital amp via optical connection. The Audigy dri've does indeed have an optical out, and it connects to my amps optical in no problem. I now expected to play a DVD on the PC (A .VOB file or by running an actual disk) and get a Dolby Digital signal at my amp. My Dolby Digital Amp (A Sony STR-DB925) doesn't seem to think that it's recieving a DD signal and plays in normal stereo.
    Anyone have an ideas on how I can get this thing working correctly ?
    any help appreciated.
    Marc

    Excellent, thanks guys. It's all working perfectly now. Although I had looked at Audio HQ I had somehow missed the Digital Passthough setting.
    Cheers
    Marc

  • Sound Blaster Audigy 2 ZS Platinum optical in questi

    Ok, I think the question is rather simple to answer.
    All I want to know is if I can delay the processing of the audio coming in from the optical input.
    Reason being is that I have a XBox360, with the HD-DVD add on, and it has a delay with the video when playing HD-DVD's. I use the VGA cable, but I verified I am not the only one with this problem, as it turns out it's with the display. (Just plain weird IMO) but delaying the audio processing would allow a proper sync of audio and video.

    I am brand new to this message system but I am so desperate for help I thought I would try it. After reading lots of comments I find that my problem may be more the rule than the exception. I have an Audigy @ Platinum card and all I ever get from it is crackling and popping. I have been around and around with Creative support but nothing they tell me results in a fix. I am so disgusted at this point that I am ready to just trash the whole thing. I have gone through the BIOS and checked so many settings its a shame. Still crackling and popping. I NEED SPECIFIC ANSWERS FROM SOMEBODY...not just the generic flip the wingle wangle to port xyz and move this to that. here has got to be an answer to this maddening problem. The other thing is that now I can't get my MIDI keyboard to play back. I must have turned something off in the set up process but now I have no idea what to do.
    If anyone has any solid answers for me PLEASE come forward with them before I kill someone!

  • Sblive optical spdif in : don't w

    I want to use my sbli've 5. platinium to decode a dolby digital signal.
    I use a optical wire.
    Despite "ac3 decode" is enabled in the surround mixer, and that "spdif bypass" is not enabled, i don't hear anything!!
    But when the optical signal is a stereo one, i have no problem (but i hear only stereo of course)
    can anyone help me?

    HELP!
    There is no way to decode an external digital signal??

  • Using an optical mouse with my s10e

    Hi
    I am not able to use any optical mouse with my s10e. Ayn driver available?
    Thank you

    Hi, but that didnt solve your problem...
    I have a little quest for you, to near the fences around the wild mice ...  
    Did you use the factory installed XP  ?
    in that case...yes..
    in case of no jump to END
    Did other usb devices recognized , like flashdrive/external hdd/keyboard ?
    have you try it on both ports ? 
    if not ...
    have you activate /installed Quickstart ?,
    if yes .
    . then plug in the usb mouse and  
    start QS for testing...external mice/keyboard  should be recognized...
    if the answer is yes...  
    i think its better to set the XP system to fresh factory recover ,
    if you answer all upper quest with no your S10e mainboard could be broken , so you have to call for service.. 
    END
    Did you install the system self... ?
    yes
    Did you have complete XP with SP3 install ?
    yes
    Did you have shrink windows with nlite ?
    yes
    Did you install all drivers chipset and so on ..
    Did you have yellow signs in the system device manager ?
    hope that you find the solution...
    sincerely  KalvinKlein
    Message Edited by KalvinKlein on 06-06-2009 01:21 AM
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • SBLIVE 5.1 : dts drops using spdif under zoomplayer and recl

    Hello there... I really need a big help.
    I'm usign a personnale HT PC done with athlon 2800 XP, gforce 5200 and SBLIVE 5..
    I plugged SBLIVE using spdif out connector to my sherwood R-945 ( DTS, DD, DPL ... ). Everything works fine under Dolby Digital 5. sound, except maybe some tearing and bypassed it using reclock.
    Ok.
    So I tried DTS sound, the sound seems to be really great ... except of : some drops which happens really randomly ... using again this spdif connector ..
    Can someone have or had the same problem and found a solution ( drivers ... firmware ... configuration tools ).
    Thx a lot,
    Cyril

    same here. Win7 media player isn't allowing me to go into "Advanced..." options to edit SPDIF settings, and VLC player SPDIF isnt working either.
    The other strange thing I've noticed is that previously (in Vista64) I would only receive output to the optical when I specifically instructed applications to do so; however now in Win7 64 drivers I'm getting output to the optical from audio intended for 6 channel analogue. It seems like there's an option that is patching audio for the 6chan out to optical out. I am still getting output on the 6channel, but it is also goes to the optical.
    This is a fresh install of Win7 64 and installed the SBXF_PCDRV_LB_2_8_003.exe drivers.

  • Optical audio out limited to stereo, or is 5.1 possible?

    I've found a lot of clues on this quest for knowledge, but I'm not certain I've put them together correctly.
    Can the Optical Digital Out jack in the PB G4 17" (1.67GHz) support 5.1-channel output if the media (movie, game) supports it, or is it strictly limited to two-channel?
    If 5.1 should be possible, can someone who has achieved it briefly describe their setup?
    Thanks much.

    There are also USB based external sound cards such as: http://www.hercules.com/us/Sound-Cards/bdd/p/56/muse-pocket-lt/. I've never used one though.
    What is the source of your 5.1 sound? To be honest the only time I've been able to get 5.1 sound out of my Mac is when I play DVDs. There is a hack to get iTunes to play 5.1 sound when playing rented/purchased movies but everything has to be set just right or it doesn't work.

  • Alsa + sblive + alsamixer = ???

    Edit: I figured it all out! No need to read on unless you have an SBLive and want to use my configuration.
    [code]state.Live {
        control.1 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Wave Playback Volume'
            value.0 80
            value.1 80
        control.2 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Wave Surround Playback Volume'
            value.0 100
            value.1 100
        control.3 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 1
            comment.range '0 - 100'
            iface MIXER
            name 'Wave Center Playback Volume'
            value 100
        control.4 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 1
            comment.range '0 - 100'
            iface MIXER
            name 'Wave LFE Playback Volume'
            value 100
        control.5 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Wave Capture Volume'
            value.0 0
            value.1 0
        control.6 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Wave Capture Switch'
            value.0 true
            value.1 true
        control.7 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Synth Playback Volume'
            value.0 100
            value.1 100
        control.8 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Synth Capture Volume'
            value.0 0
            value.1 0
        control.9 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Synth Capture Switch'
            value.0 false
            value.1 false
        control.10 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Surround Playback Volume'
            value.0 0
            value.1 0
        control.11 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Surround Capture Volume'
            value.0 0
            value.1 0
        control.12 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Surround Capture Switch'
            value.0 true
            value.1 true
        control.13 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 1
            comment.range '0 - 100'
            iface MIXER
            name 'Center Playback Volume'
            value 0
        control.14 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 1
            comment.range '0 - 100'
            iface MIXER
            name 'LFE Playback Volume'
            value 100
        control.16 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Front Capture Volume'
            value.0 0
            value.1 0
        control.17 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'Front Capture Switch'
            value false
        control.18 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'AC97 Playback Volume'
            value.0 0
            value.1 0
        control.19 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'AC97 Capture Volume'
            value.0 100
            value.1 100
        control.20 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'IEC958 TTL Playback Volume'
            value.0 0
            value.1 0
        control.21 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'IEC958 TTL Capture Volume'
            value.0 0
            value.1 0
        control.22 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'IEC958 TTL Capture Switch'
            value.0 false
            value.1 false
        control.23 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'IEC958 LiveDrive Playback Volume'
            value.0 0
            value.1 0
        control.24 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'IEC958 LiveDrive Capture Volume'
            value.0 0
            value.1 0
        control.25 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'IEC958 LiveDrive Capture Switch'
            value.0 false
            value.1 false
        control.26 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Line LiveDrive Playback Volume'
            value.0 0
            value.1 0
        control.27 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Line LiveDrive Capture Volume'
            value.0 0
            value.1 0
        control.28 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Line LiveDrive Capture Switch'
            value.0 false
            value.1 false
        control.29 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'IEC958 Coaxial Playback Volume'
            value.0 0
            value.1 0
        control.30 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'IEC958 Coaxial Capture Volume'
            value.0 0
            value.1 0
        control.31 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'IEC958 Coaxial Capture Switch'
            value.0 false
            value.1 false
        control.32 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Line2 LiveDrive Playback Volume'
            index 1
            value.0 0
            value.1 0
        control.33 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Line2 LiveDrive Capture Volume'
            index 1
            value.0 0
            value.1 0
        control.34 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Line2 LiveDrive Capture Switch'
            index 1
            value.0 false
            value.1 false
        control.35 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 40'
            iface MIXER
            name 'Tone Control - Bass'
            value.0 0
            value.1 0
        control.36 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 40'
            iface MIXER
            name 'Tone Control - Treble'
            value.0 0
            value.1 0
        control.37 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Tone Control - Switch'
            value.0 false
            value.1 false
        control.38 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'IEC958 Optical Raw Playback Switch'
            value.0 false
            value.1 false
        control.39 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 100'
            iface MIXER
            name 'Headphone Playback Volume'
            index 1
            value.0 0
            value.1 0
        control.40 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'Headphone Center Playback Switch'
            index 1
            value false
        control.41 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'Headphone LFE Playback Switch'
            index 1
            value false
        control.42 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 32
            iface PCM
            device 2
            name 'Captured FX8010 Outputs'
            value.0 false
            value.1 false
            value.2 false
            value.3 false
            value.4 false
            value.5 false
            value.6 false
            value.7 false
            value.8 false
            value.9 false
            value.10 false
            value.11 false
            value.12 false
            value.13 false
            value.14 false
            value.15 false
            value.16 true
            value.17 true
            value.18 true
            value.19 true
            value.20 true
            value.21 true
            value.22 true
            value.23 true
            value.24 true
            value.25 true
            value.26 true
            value.27 true
            value.28 true
            value.29 true
            value.30 true
            value.31 true
        control.43 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'Master Playback Switch'
            value true
        control.44 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 31'
            iface MIXER
            name 'Master Playback Volume'
            value.0 31
            value.1 31
        control.52 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 31'
            iface MIXER
            name 'Front Playback Volume'
            value.0 30
            value.1 30
        control.55 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'PC Speaker Playback Switch'
            value false
        control.56 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 1
            comment.range '0 - 15'
            iface MIXER
            name 'PC Speaker Playback Volume'
            value 0
        control.57 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'Phone Playback Switch'
            value false
        control.58 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 1
            comment.range '0 - 31'
            iface MIXER
            name 'Phone Playback Volume'
            value 0
        control.59 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Mic Playback Switch'
            value.0 false
            value.1 false
        control.60 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 1
            comment.range '0 - 31'
            iface MIXER
            name 'Mic Playback Volume'
            value 0
        control.61 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'Mic Boost (+20dB)'
            value false
        control.62 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Line Playback Switch'
            value.0 false
            value.1 false
        control.63 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 31'
            iface MIXER
            name 'Line Playback Volume'
            value.0 0
            value.1 0
        control.64 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'CD Playback Switch'
            value.0 false
            value.1 false
        control.65 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 31'
            iface MIXER
            name 'CD Playback Volume'
            value.0 0
            value.1 0
        control.66 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Surround Mix Playback Switch'
            value.0 false
            value.1 false
        control.67 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 31'
            iface MIXER
            name 'Surround Mix Playback Volume'
            value.0 23
            value.1 23
        control.68 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Aux Playback Switch'
            value.0 false
            value.1 false
        control.69 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 31'
            iface MIXER
            name 'Aux Playback Volume'
            value.0 0
            value.1 0
        control.70 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'PCM Playback Switch'
            value.0 false
            value.1 false
        control.71 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 31'
            iface MIXER
            name 'PCM Playback Volume'
            value.0 23
            value.1 23
        control.72 {
            comment.access 'read write'
            comment.type ENUMERATED
            comment.count 2
            comment.item.0 Mic
            comment.item.1 CD
            comment.item.2 Video
            comment.item.3 Aux
            comment.item.4 Line
            comment.item.5 Mix
            comment.item.6 'Mix Mono'
            comment.item.7 Phone
            iface MIXER
            name 'Capture Source'
            value.0 Mic
            value.1 Mic
        control.73 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 2
            iface MIXER
            name 'Capture Switch'
            value.0 true
            value.1 true
        control.74 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 2
            comment.range '0 - 15'
            iface MIXER
            name 'Capture Volume'
            value.0 0
            value.1 0
        control.76 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name '3D Control - Switch'
            value true
        control.78 {
            comment.access 'read write'
            comment.type ENUMERATED
            comment.count 1
            comment.item.0 Mic1
            comment.item.1 Mic2
            iface MIXER
            name 'Mic Select'
            value Mic2
        control.79 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 1
            comment.range '0 - 3'
            iface MIXER
            name '3D Control Sigmatel - Depth'
            value 3
        control.80 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'Sigmatel 4-Speaker Stereo Playback Switch'
            value false
        control.81 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'Sigmatel Surround Phase Inversion Playback '
            value false
        control.82 {
            comment.access 'read write'
            comment.type ENUMERATED
            comment.count 1
            comment.item.0 Input/Disabled
            comment.item.1 'Front Output'
            comment.item.2 'Rear Output'
            comment.item.3 'Center/LFE Output'
            comment.item.4 'Mixer Output'
            iface MIXER
            name 'Mic1 Jack'
            value Input/Disabled
        control.83 {
            comment.access 'read write'
            comment.type ENUMERATED
            comment.count 1
            comment.item.0 Input/Disabled
            comment.item.1 'Front Output'
            comment.item.2 'Rear Output'
            comment.item.3 'Center/LFE Output'
            comment.item.4 'Mixer Output'
            iface MIXER
            name 'LineIn Jack'
            value Input/Disabled
        control.84 {
            comment.access 'read write'
            comment.type ENUMERATED
            comment.count 1
            comment.item.0 Input/Disabled
            comment.item.1 'Front Output'
            comment.item.2 'Rear Output'
            comment.item.3 'Center/LFE Output'
            comment.item.4 'Mixer Output'
            iface MIXER
            name 'Front Jack'
            value 'Front Output'
        control.85 {
            comment.access 'read write'
            comment.type ENUMERATED
            comment.count 1
            comment.item.0 Input/Disabled
            comment.item.1 'Front Output'
            comment.item.2 'Rear Output'
            comment.item.3 'Center/LFE Output'
            comment.item.4 'Mixer Output'
            iface MIXER
            name 'Rear Jack'
            value 'Rear Output'
        control.86 {
            comment.access 'read write'
            comment.type ENUMERATED
            comment.count 1
            comment.item.0 Input/Disabled
            comment.item.1 'Front Output'
            comment.item.2 'Rear Output'
            comment.item.3 'Center/LFE Output'
            comment.item.4 'Mixer Output'
            iface MIXER
            name 'Center/LFE Jack'
            value 'Center/LFE Output'
        control.87 {
            comment.access 'read write'
            comment.type ENUMERATED
            comment.count 1
            comment.item.0 'Mic2 Jack'
            comment.item.1 'Mic1 Jack'
            comment.item.2 'Line In Jack'
            comment.item.3 'Front Jack'
            comment.item.4 'Rear Jack'
            comment.item.5 'Center/LFE Jack'
            comment.item.6 Mute
            iface MIXER
            name 'Mic Input Source'
            value Mute
        control.88 {
            comment.access 'read write'
            comment.type ENUMERATED
            comment.count 1
            comment.item.0 'Mic2 Jack'
            comment.item.1 'Mic1 Jack'
            comment.item.2 'Line In Jack'
            comment.item.3 'Front Jack'
            comment.item.4 'Rear Jack'
            comment.item.5 'Center/LFE Jack'
            comment.item.6 Mute
            iface MIXER
            name 'Line Input Source'
            value Mute
        control.89 {
            comment.access 'read write'
            comment.type ENUMERATED
            comment.count 1
            comment.item.0 None
            comment.item.1 'Front Jack'
            comment.item.2 'Rear Jack'
            iface MIXER
            name 'Headphone Amp'
            value None
        control.90 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'Exchange Center/LFE'
            value false
        control.91 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'Headphone +3dB Boost'
            value false
        control.92 {
            comment.access 'read write'
            comment.type BOOLEAN
            comment.count 1
            iface MIXER
            name 'External Amplifier'
            value false
        control.93 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.94 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 1
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.95 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 2
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.96 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 3
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.97 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 4
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.98 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 5
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.99 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 6
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.100 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 7
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.101 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 8
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.102 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 9
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.103 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 10
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.104 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 11
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.105 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 12
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.106 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 13
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.107 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 14
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.108 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 15
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.109 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 16
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.110 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 17
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.111 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 18
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.112 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 19
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.113 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 20
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.114 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 21
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.115 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 22
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.116 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 23
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.117 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 24
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.118 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 25
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.119 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 26
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.120 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 27
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.121 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 28
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.122 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 29
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.123 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 30
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.124 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 15'
            iface PCM
            name 'EMU10K1 PCM Send Routing'
            index 31
            value.0 0
            value.1 1
            value.2 2
            value.3 3
            value.4 0
            value.5 1
            value.6 2
            value.7 3
            value.8 0
            value.9 1
            value.10 2
            value.11 3
        control.125 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.126 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 1
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.127 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 2
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.128 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 3
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.129 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 4
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.130 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 5
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.131 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 6
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.132 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 7
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.133 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 8
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.134 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 9
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.135 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 10
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.136 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 11
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.137 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 12
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.138 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 13
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.139 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 14
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.140 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 15
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.141 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 16
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.142 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 17
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.143 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 18
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.144 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 19
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.145 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 20
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.146 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 21
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.147 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 22
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.148 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 23
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.149 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 24
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.150 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 25
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.151 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 26
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.152 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 27
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.153 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 28
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.154 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 29
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.155 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 30
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.156 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 12
            comment.range '0 - 255'
            iface PCM
            name 'EMU10K1 PCM Send Volume'
            index 31
            value.0 255
            value.1 255
            value.2 0
            value.3 0
            value.4 255
            value.5 0
            value.6 0
            value.7 0
            value.8 0
            value.9 255
            value.10 0
            value.11 0
        control.157 {
            comment.access 'read write'
            comment.type INTEGER
            comment.count 3
            comment.range '0 - 65535'
            iface PCM
            name 'EMU10K1 PCM Volume'
            value.0 65535
            value.1 65535
            value.2 65535
        control.158 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 3
            comment.range '0 - 65535'
            iface PCM
            name 'EMU10K1 PCM Volume'
            index 1
            value.0 65535
            value.1 65535
            value.2 65535
        control.159 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 3
            comment.range '0 - 65535'
            iface PCM
            name 'EMU10K1 PCM Volume'
            index 2
            value.0 65535
            value.1 65535
            value.2 65535
        control.160 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 3
            comment.range '0 - 65535'
            iface PCM
            name 'EMU10K1 PCM Volume'
            index 3
            value.0 65535
            value.1 65535
            value.2 65535
        control.161 {
            comment.access 'read write inactive'
            comment.type INTEGER
            comment.count 3
            comment.range '0 - 65535'
            iface PCM
            name 'EMU10K1 PCM Volume'
            index 4
            value.0 65535
            value.1 65535
            value.2 65535
        control.162 {

    It's because of alsa 1.0.16.
    Check that this shows 1.0.16, for your kernel sound modules:
    $ cat /proc/asound/version
    Advanced Linux Sound Architecture Driver Version 1.0.16.
    I would recommend deleting /etc/asound.conf, rebooting (just to be mega-certain that the soundcard setup isn't screwed up), then setting up alsamixer from scratch. I've seen a bad /etc/asound.conf do crazy things to soundcards
    I use an Audigy 4, so it's fairly similar - here's my result of amixer, for 5.1 sound.

  • Removing MDD optical drives won't wake up - Cause ??

    Hello,
    I've recently been on a quest to quite down my G4 MDD. I plan on replacing just about every fan in the enclosure and wanted to streamline things. One of the thoughts that I had was to remove the optical drives. I don't use them (this machine is mostly used as a file server, so everything is done through the network), and it's one source of heat that I can remove. Plus, as I mentioned, it's one less thing to have to move air around.
    I went ahead and removed the drives and unhooked all of the connections from them to the motherboard and everything booted nicely! System Profiler admits to not finding any optical drives, so I guess that worked fine. My problem arised when I sleep the machine. It wakes up in a locked state. The fans kick on and the display wakes up, but the machine is effectively locked; I can't do anything. A manual reboot works fine and the machine is operable until I sleep it again and I see the same problem.
    Once I put the drives back in and hook them back up, all problems go away and the machine wakes beautifully.
    Is there some dependency on the drives that I'm missing here? I never use them and want to get them out of the case.
    Any help would be appreciated. Thanks in advance!
    -Alan

    Hi,
    Don't forget to look at the far right of the logic board where you will find an empty two pin connector. Use that to connect an external fan to further cool the system. I have three fans running in my system: a PCI slot fan, a 120MM fan on top of my optical drive roof, and another 120MM on the bottom underneath the front drive cage. My temperature is an astounding: 89 degrees FAHRENHEIT!
    It does get higher if I am watching a movie, or youtubing.

  • How do I install Windows 8 on Mountain Lion (mac mini) 2010 Server using bootcamp with out Optical Drive?

    I have a 2010 Mac Mini server running 10.8.4 (12E55).  I just bought a brand new copy of Windows 8 from micrsoft.  I have tried using boot camp and it will not recognize a burned DVD in my remote optical drive on my laptop running windows 7 or my macbook running Lion 10.7.5.   I have had Microsoft on both of my computers remoted in for about 8 hours and they tried just about everything that I've tried.
    Microsofts tech support has made me a bootable DVD and a bootable Flash Drive through remote desktop (awsome good job microsoft tech support).  I have even tried formatting my mac mini's second 500GB hard drive to FAT32 using this whole disc as my windows partition.  I know that when I go to install windows 8 it is going to reformat the drive to NTFS but all the articles that I've found, say this is what you have to do to get the drive formatted properly to get the ball rolling and get windows will fix it when it goes to install by reformatting to NTFS. 
    Ok so right now I have my second 500GB hdd on my mac mini formatted to FAT32 and I have tried to reboot holding my option key like I do on my mac book.  If I want to boot to a different hdd on my macbook all I do is hold the OPTION key during start up and you get prompted to choose one of the bootable disc that is on your computer.  Well if I put my USB drive which is bootable on my macbook into my macbook and do this right now its not showing up. 
    Now I just put the DVD that they made me in my macbook and it shows up as bootable disc.  But the USB doesn't.  (1 hour later)  I just got microsft to remake the USB drive and am going to try that again so ta ta for now and I'll come back on to post to tell you if it works.

    mikkel-kj wrote:
    These apps paralells and fusion and virtualbox, are they in Mac App Store? And when I have the app installed what then, now it ain't only bootcamp what shall I do now to install windows 8?
    Mikkel
    Parallels, Fusion, and VirtualBox are available from their respective sites. Read their installation instructions which explain how to install Windows.

  • Optical drive no longer recognized by Leopard

    Hello everyone,
    Over the last few months, I started getting MEDIUM errors while burning cdrs with Toast Titanium. Burning DVD's was never a problem. I even tried using several different brands of cdrs to no avail.
    My Macbook Pro is out of warranty, so I decided to hit the web for a solution. My next option was just to buy a new superdrive. I found a site that gave instructions for opening up the computer, opening up the superdrive case, and cleaning the lens with an alcohol solution. I was desperate.
    My Leopard OS will not recognize a drive at all now. If I put a cd in, it will spin up, but the OS won't load any data off of it. I couldn't even eject the disc, so I had to open the computer up again. My question is, would the alcohol solution (small amount on qtip), cause a drive to not be recognized by the OS? I connected the cable properly, secure, so I know its not that. Anything else i can try before I buy a new drive?
    Any help would be greatly appreciated.

    Hello
    Would appreciate if the original poster could give us an update.
    My MBP would randomly not read or mount certain diska. Earlier this evening I decide to upgrade my HD so I decide while the case was open to remove and open superdrive and clean the lens with alcohol. Drive spins up but System Profiler does not find the ATA device now (optical cable fully attached, and have experience with these systems). Just ordered a replacement drive, but looking for some reassurance

  • My LightScribe optical drive is no longer recognized. It seems to run, but isn't in the drive list.

    I have tried updating the driver, deleting the existing driver first, but when I try to reinstall the newly downloaded driver I get the following error:
    Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
    To start a troubleshooter that can help you resolve any problems you might be having, click Finish.
    The troubleshooter does not offer any useful suggestions. How can I get the driver to install? If there is some kind of corruption, what are my options? If I have to replace the optical device, what can I replace it with?

    My own HP pavillion has the same problem. Try googling "Vista doesn't recognize DVD" one answer is to edit our upper and lower filters in a registry setting, another is to power down and remove battery for at least a minute and a third is a script that you can run. I only mention them because I've seen all 3 and according to the sites all 3 have met with some success. Sadly for me, no glory! Good luck as I'm still looking.

  • How do I install OSX onto a new SSD (in the place of my optical drive) without transferring all data across.  However, with the applications, system and library on the SSD to improve the speed, but keep non essential items (the home folder) on the HDD

    I have a mid 2009 13 inch unibody 2.53GHz MacBook Pro.  I'm finding that it doesn't run as quickly as it used to. 
    A genius in the Apple store suggested that I replace my optical drive with an SSD, however only use the SSD for OSX, applications, system and library.  Keep all documents, pictures, music etc on the current hard drive. 
    I would be grateful if someone could help me with:
    1) installing OSX on the SSD without copying across data from the current hard drive
    2) transferring applications, system and library folders across to the SSD so that they still function
    3) changing my settings so that OSX reads the home folder from the current hard drive, as well as all the applications' data (documents, music etc...)
    However, I would like to run iMovie, with all events etc solely from the SSD to speed up the process of editing movies.
    If anyone could help with this, it would be much appreciated.

    If you got the data transfer cable with your SSD, the procedure should be pretty simple - and there should be step-by-step instructions in the box. You're simply going to remove the bottom case of your computer (using a Phillips #00 screwdriver), take out the two screws in the bracket holding the hard drive into place (using same screwdriver), remove the drive and (use a Torx 6 screwdriver) remove the four screws that hold the hard drive in place. Then put in the SSD and reassemble the machine.
    Then you'll plug up the old hard drive by using the SATA to USB cable and use the option key to boot from the old drive. I don't know what data transfer software Crucial provides, but I would recommend formatting the SSD  using Disk Utility from your old drive ("Mac OS Extended (Journaled)" with a single GUID partition) and then use Carbon Copy Cloner to clone your old drive to your new SSD (see this user tip for cloning - https://discussions.apple.com/docs/DOC-4122). You needn't worry about getting an enclosure since you have the data transfer cable and you don't want to use your old hard drive.
    There are a number of videos on YouTube that take you step-by-step through this procedure - many specific to Crucial SSDs and their data transfer kit - do a little searching there if you're unsure of how to procede.
    Clinton

  • Are there any recovery tools for optical media?

    I've had a couple of DVD's  turned in to coasters recently and I was hoping that Linux could come to my rescue with some awesome 'raw-read' / recovery tools for optical media?
    I burnt the discs in Windows 7 using InfraRecorder on a brand new Plextor drive (a 'PX-891SA') and these are my first attempts to burn discs with it so I'm a bit worried it could be a hardware fault!
    I started off trying to back up some files to clear some space on my hard-drive, burning them to a dual-layer dvd, but the software kept failing to even start the burn process -- that was until I realised that I needed to run the program "as Administrator" (in Windows). It did then manage to burn the disc (I was using "Session-at-Once" mode) however when it came to the end of the burn process / the start of the 'verify data' phase it threw an error saying the write process had failed! Windows couldn't access the disc / data and (I think) still thought the disk was empty. So I restarted the burning application and used a function to just 'close' the whole disc. This seemed to work because Windows was then able to recognise the disc and read the data, although accessing the disc was slow and sounded 'stutter' ish.
    I then tried to write a single layer dvd to finish off the last couple of gig I had to back up, but again the software completed the burn phase only to report a 'fail' error right at the end (I'm assuming) before finalising the disc. Although this time I'd tried to create a multi-session disc by using the '2XXA' (or something) 'Multi-Session' iso9660 format. The result was that Windows couldn't read the disc and still thought it was empty, even after trying a forced 'close disc' operation! -- Linux however could read the disc and see that the data had in fact been burnt to the disc (although I've not yet tried copying it in Linux!).
    Finally I needed to burn a load of archives to a couple of discs (totaling ~9GiB) -- starting with a dual-layer dvd first everything seemed to be working fine, the burn process started okay and the write buffer was full etc., until at what I assume was the layer change-over it all came to a grinding halt and threw another 'write operation failed' error, only this time I can't even mount the disk in Linux....see 'dmesg | tail' output below:
    [ 5758.353005] ISO 9660 Extensions: Microsoft Joliet Level 3
    [ 5758.353015] ISOFS: Interleaved files not (yet) supported.
    [ 5758.353016] ISOFS: File unit size != 0 for ISO file (1472).
    [ 5758.353019] ISOFS: changing to secondary root
    [ 5758.353035] ISOFS: Interleaved files not (yet) supported.
    [ 5758.353036] ISOFS: File unit size != 0 for ISO file (1536).
    [ 5758.353037] isofs_fill_super: root inode is not a directory. Corrupted media?
    Does anyone have any thought or suggestions that might help?
    - Is it likely to be a hardware fault? (I bought a Plextor because I thought they were one of the best!)
    Maybe even if I could just close the session all would not be lost?
    -- Thanks in advance --
    >>>> UPDATE >>>>
    I tried to use ddrescue....it was fine until it got to the end of the disk and then it sounded like the drive was chewing on a bag of pork scratchings
    $ sudo ddrescue -v /dev/sr0 /mnt/odd/ddr.file ~/ddr.log
    GNU ddrescue 1.16
    About to copy 4029 MBytes from /dev/sr0 to /mnt/odd/ddr.file
    Starting positions: infile = 0 B, outfile = 0 B
    Copy block size: 128 sectors Initial skip size: 128 sectors
    Sector size: 512 Bytes
    Press Ctrl-C to interrupt
    rescued: 4028 MB, errsize: 983 kB, current rate: 0 B/s
    ipos: 4028 MB, errors: 1, average rate: 3310 kB/s
    opos: 4028 MB, time since last successful read: 10.8 m
    Splitting failed blocks...
    Interrupted by user
    ...it was taking forever and getting nowhere so I just pressed 'ctrl+c'.....here's the log file:
    # Rescue Logfile. Created by GNU ddrescue version 1.16
    # Command line: ddrescue -v /dev/sr0 /mnt/odd/ddr.file /home/shodan/ddr.log
    # current_pos current_status
    0xF0213000 /
    # pos size status
    0x00000000 0xF0208000 +
    0xF0208000 0x0000B000 -
    0xF0213000 0x0000D000 /
    0xF0220000 0x00000400 -
    0xF0220400 0x0001FE00 /
    0xF0240200 0x00000400 -
    0xF0240600 0x0003FE00 /
    0xF0280400 0x00000400 -
    0xF0280800 0x00077600 /
    0xF02F7E00 0x00000200 -
    When I tried to mount the output file using $ sudo mount -ro loop /mnt/odd/ddr.file /mnt/vodd I got the same error as with the actual disc (natch)...
    mount: wrong fs type, bad option, bad superblock on /dev/loop0,
    missing codepage or helper program, or other error
    In some cases useful info is found in syslog - try
    dmesg | tail or so
    Last edited by wwgfd (2012-12-14 13:18:41)

    @chris_l -- yeah I was worried that might be the case, still I'm not sure if that explains why it keeps failing the burn process part way through?
    I've tried this and that in Linux but without much luck. I'm still quite a noob with a lot of Linux things and this is the first time I'm trying anything to do with optical disks/drives etc. so I'm learning as I go...
    The disk that failed in Windows but was 'readable' in Linux did just pass a run through ddrescue -- i.e. it created an output file okay and did not report any errors in the process.
    However when I mounted the resulting image and tried to copy the files across the first folder reported an "input/ouput error" (just using gui copy+paste in Thunar file manager)
    ...the other folders did copy okay though!
    It seems as though it's the lead-in / lead-out and disc finalizing process that are the main fail points with the burn operation. I don't know if InfraRecorder is any good or likely to be the problem? Anyway the drive cam with Nero (inc. Linux version) so might give either or both of these a go too, if they don't work either then at least I wont be short of something to rest a mug o' tea on
    @ chris_l (again) -- the Plextor drives do have a "Vari-Rec" feature which allows a user to 'tweak' the laser power / output level so I might try this too.
    @alphaniner -- thanks I've not seen this package before, I'm guessing it's a bit like cdparanoia but for dvds?!
    Thanks for the help!
    (pre-post) UPDATE >>> I've just mounted my Windows partition  in Linux so I'll have a crack at burning the files using cdrtools before I resort to throwing the dvd drive out of the window and chasing it around the yard with a lump hammer

Maybe you are looking for

  • Keeps coming up with not responing how can I fix this

    Every time I open up my web browser I get " not responding" and have to wait. I did a refresh for firefox but that did not help. Was hoping the update would have cured that problem but it did not. This has been going on for quite some time and it is

  • Network connection, which is better?

    I will be adding a MAC Pro Tower, dual quad 8, to my wireless network this week. At present, I have one wired connection and 3 wireless connection on my d-link n-protocol network. My question is this: Should I connect the MAC computer wirelessly or w

  • OData Syntax for Now()

    Hi I am wondering if it is possible to incorporate the Now() function in an oData statement.  If so, what would the oData command look like.  Ultimately, I am wondering how to write the $filter=... so that I capture date fields for data that is a few

  • Converting excel file to PDF using Adobe 9 standard on windows XP

    I have installed office 2010 SP1 on a computer and it already has adobe 9 installed. user never had problem with converting multi sheet excel workbook to PDF using MSoffice 2003. Now, when we open excel files in EXCEL 2010 then try to print it to ado

  • Where is the "CR ODBC XML Driver" in CRS 2008?

    Hi, We use a lot the "CR ODBC XML Driver 4.20" included with "Crystal Reports Server XI" to generate reports to our web-applications. Now I am trying the new version "Crystal Reports Server 2008 V1" and after installing it I don't see that driver in