SBO Backup Error 1075

Hi all!
on a Windows Server 2008 R2 64-bit when I try to start the service of the SBO Backup I get the following error 1075: "The dependency service does not exist or Has Been marked for deletion".
Reinstalling the server tools, the SboBackup start but every time you restart the machine you get the error again.
What could be a permanent solution?
Thanks.

Hi,
Please refer below thread:
http://scn.sap.com/thread/2054599
Simillar problems were discussed in this forum .Please search more informations.
Thanks & Regards,
Nagarajan

Similar Messages

  • SBO Backup and Messenging Service - Starting

    Hi all experts,
    My customer is running SAP B1 8.8 PL13. Everything was working fine.
    Last night, they restarted their SAP Server. After that SBO Backup and SBO Mailer services cannot be started. I opened the SBO Service Manager and the Run, Pause, Stop buttons are all greyed out. I go to the services in control panel, SAP Business One BackUp Service and SAP Business One Messaging Service status is always in "STARTING" but it does not change to started. Other services are fine.
    What should i do?
    thanks,
    Taw-Fey

    Hi,
    You can try this sap note solution:
    Collation Settings of MSSQL Server 2005 or 2008
    Symptom
    When defining the wrong collation during manual installation of MSSQL Server 2005 or MSSQL 2008, in certain situations it might cause functional problems. Examples:
    1. When trying to use any functionality of Drag & Relate, the following error message will be displayed: 'No matching record found'.
    2. When runing "Sales\Purchase analysis report" for Business Partner, the report might not retrieve any results eventhough it should.
    Other terms
    MSSQL 2005, MSSQL 2008, SQL server, documentation, collation, Drag & relate, drag and relate, collation settings, collation setting, SQL 2005, SQL 2008
    Reason and Prerequisites
    Consulting Note
    Solution
    The latest version of any documentation can be found at http://service.sap.com/smb/sbo/documentation.
    Please make sure to choose collation setting of: SQL_Latin1_General_CP1_CI_AS
    when installing MSSQL 2005 / 2008 Server.
    In order to check what the collation is set to in your server, please run the following query:
    Collation of your Server:
    select SERVERPROPERTY ('collation')
    (This query gets the collation settings of MSSQL Server's System Database "Master")
    Expected answer : SQL_Latin1_General_CP1_CI_AS
    In case you have already installed the MSSQL 2005 or 2008 Server with any collation other than SQL_Latin1_General_CP1_CI_AS, please follow the steps below:
    Change your server collation to SQL_Latin1_General_CP1_CI_AS.
    You can find Microsoft's instructions for changing an SQL server collation here:
    http://msdn2.microsoft.com/en-us/library/ms179254.aspx
    Please note that collation settings of Database "Master" needs to be changed only. All SAP Business One Databases must not be changed! These must remain on SQL_Latin1_General_CP850_CI_AS.
    If you need any clarifications with this process please refer to an Expert Empowerment Session "SQL 2005 Server Collation settings" at https://websmp203.sap-ag.de/~sapidb/011000358700000050892007E/ or http://service.sap.com/smb/sbo/support -> Archive: Empowerment Sessions.
    If you have any Servicepack for MSSQL Server installed, but the Servicepack is not included into your DVD MSSQL Server, do as follows:
    1. Deinstall Servcicepack
    2. Change Collation Settings as per Expert Empowerment Session
    3. Install Servicepack again
    I have checked that if you install SQL server manually, the collation will be Latin1_General_CI_AS.
    JimM

  • SBO Backup not backing up one of the Company Database

    Hi Expert,
    My customer environment is :-
    Windows Server 2008 R2 SP1
    MS-SQL 2005 SP3
    SAP B1 2007B PL15 Hotfix
    There are 8 company databases ticked in SBO Backup Database tab. 7 of them are backup successfully at the scheduled time, except 1. The MDF file is 3GB and the LDF file is around 800MB. There are still around 45GB free disk spaces remaining in this drive.
    May i know why this database not backup?
    Thanks,
    Taw-Fey
    Edited by: Taw Fey Tan on Mar 22, 2011 8:49 AM

    Hi Bala,
    I have tried to just run SBO Backup for that particular company. Still no backup happen.
    But there is an error in Windows Event Viewer Application Log with SBO Backup.
    ERROR
    The description for Event ID 166 from source SBOBackUp cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The specified resource type cannot be found in the image file
    Please advice what else should i do, thanks.
    Taw-Fey, Tan

  • Backup error occured, Error code 3700 "hostfile_error"

    HI,
    We are trying to MaxDB database backup to tape and getting below error.
    ===================================================================================================
    ERR
    -24988,ERR_SQL: SQL error
    -104,DBM command impossible at this time
    3,Data backup failed
    Servertask Info: because Error in backup task occured
    Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
    Error in backup task occured, Error code 3700 "hostfile_error"
    Backupmedium #1 (
    .\pipe\backup) I/O Error
    Backup error occured, Error code 3700 "hostfile_error"
    ===================================================================================================
    I went through the previous threads regarding the same error but couldn't find a solution.
    System Info is Win 2008, MaxDB version 7.7.07.14.
    Here is the complete log, please suggest what can be done.
    ===================================================================================================
    DBA Action starts:
    Timestamp: 20110831100408   Function: sda   Object: DATA
    2011-08-31 10:04:08
    Using environment variable 'TEMP' with value 'C:\Windows\TEMP' as directory for temporary files and pipes.
    Using connection to Backint for MaxDB Interface.
    2011-08-31 10:04:09
    Checking existence and configuration of Backint for MaxDB.
        Using environment variable 'BSI_ENV' with value 'G:\sapdb\data\wrk\MXP\bsi.env' as path of the configuration file of Backint
        Reading the Backint for MaxDB configuration file 'G:\sapdb\data\wrk\MXP\bsi.env'.
            Found keyword 'BACKINT' with value 'D:\sapdb\MXP\db\bin\backint.exe'.
            Found keyword 'INPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.in'.
            Found keyword 'OUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.out'.
            Found keyword 'ERROROUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.err'.
            Found keyword 'PARAMETERFILE' with value 'G:\sapdb\data\wrk\MXP\maxdb_config.par'.
            Found keyword 'ORIGINAL_RUNDIRECTORY' with value 'G:\sapdb\MXP\sapdata'.
        Finished reading of the Backint for MaxDB configuration file.
        Using 'D:\sapdb\MXP\db\bin\backint.exe' as Backint for MaxDB program.
        Using 'G:\sapdb\data\wrk\backint\sapdb.in' as input file for Backint for MaxDB.
        Using 'G:\sapdb\data\wrk\backint\sapdb.out' as output file for Backint for MaxDB.
        Using 'G:\sapdb\data\wrk\backint\sapdb.err' as error output file for Backint for MaxDB.
        Using 'G:\sapdb\data\wrk\MXP\maxdb_config.par' as parameter file for Backint for MaxDB.
        Using '300' seconds as timeout for Backint for MaxDB in the case of success.
        Using '300' seconds as timeout for Backint for MaxDB in the case of failure.
        Using 'G:\sapdb\MXP\sapdata\dbm.knl' as backup history of a database to migrate.
        Using 'G:\sapdb\MXP\sapdata\dbm.ebf' as external backup history of a database to migrate.
        Checking availability of backups using backint's inquire function.
    Check passed successful.
    2011-08-31 10:04:09
    Checking medium.
    Check passed successfully.
    2011-08-31 10:04:09
    Preparing backup.
        Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
        Setting environment variable 'BI_REQUEST' to value 'NEW'.
        Setting environment variable 'BI_BACKUP' to value 'FULL'.
        Constructed Backint for MaxDB call 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
        Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.out' as output for Backint for MaxDB.
        Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.err' as error output for Backint for MaxDB.
        Writing '
    .\pipe\backup #PIPE' to the input file.
    Prepare passed successfully.
    2011-08-31 10:04:09
    Starting database action for
         the backup.
        Requesting 'SAVE DATA QUICK TO '
    .\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BackupMXP'' from db-kernel.
    The database is working on the request.
    2011-08-31 10:04:09
    Waiting until database has prepared the backup.
        Asking for state of database.
        2011-08-31 10:04:09 Database is still preparing the backup.
        Waiting 1 second ...
        Done.
        Asking for state of database.
        2011-08-31 10:04:10 Database has finished preparation of the backup.
    The database has prepared the backup successfully.
    2011-08-31 10:04:10
    Starting Backint for MaxDB.
        Starting Backint for MaxDB process 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
        Process was started successfully.
    Backint for MaxDB has been started successfully.
    2011-08-31 10:04:10
    Waiting for end of the backup operation.
        2011-08-31 10:04:10 The backup tool is running.
        2011-08-31 10:04:10 The database is working on the request.
        2011-08-31 10:04:15 The backup tool is running.
        2011-08-31 10:04:15 The database is working on the request.
        2011-08-31 10:04:25 The backup tool is running.
        2011-08-31 10:04:25 The database is working on the request.
        2011-08-31 10:04:40 The backup tool is running.
        2011-08-31 10:04:40 The database is working on the request.
        2011-08-31 10:05:00 The backup tool is running.
        2011-08-31 10:05:00 The database is working on the request.
        2011-08-31 10:05:13 The backup tool process has finished work with return code 2.
        2011-08-31 10:05:13 The database has finished work on the request.
        Receiving a reply from the database kernel.
        Got the following reply from db-kernel:
            SQL-Code              :-903
    The backup operation has ended.
    2011-08-31 10:05:13
    Filling reply buffer.
        Have encountered error -24920:
            The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
        Constructed the following reply:
            ERR
            -24920,ERR_BACKUPOP: backup operation was unsuccessful
            The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
    Reply buffer filled.
    2011-08-31 10:05:13
    Cleaning up.
        Copying output of Backint for MaxDB to this file.
    Begin of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
            Reading parameter file G:\sapdb\data\wrk\MXP\maxdb_config.par.
            Using staging area D:\TEMP\STAGE1 with a size of 1048576000 bytes.
            Using staging area D:\TEMP\STAGE2 with a size of 1048576000 bytes.
            Using 2 file per Backint for Oracle call.
            Using C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe as Backint for Oracle.
            Using G:\sapdb\data\wrk\MXP\initMXP.utl as parameterfile of Backint for Oracle.
            Using G:\sapdb\data\wrk\MXP\BackintHistory.txt as history file.
            Using G:\sapdb\data\wrk\backint\backint1.in as input of Backint for Oracle.
            Using G:\sapdb\data\wrk\backint\backint1.out as output of Backint for Oracle.
            Using G:\sapdb\data\wrk\backint\backint1.err as error output of Backint for Oracle.
            Using a maximal delay for a Backint for Oracle call of 3600 seconds.
            Reading input file G:\sapdb\data\wrk\backint\sapdb.in.
            Backing up pipe
    .\pipe\backup.
            Found 1 entry in the input file.
            Starting the backup.
            Starting pipe2file program(s).
            Waiting for creation of temporary files.
            1 temporary file is available for backup.
            Calling Backint for Oracle at 2011-08-31 10:05:12.
            Calling 'C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\initMXP.
            Backint for Oracle ended at 2011-08-31 10:05:13 with return code 2.
            Backint for Oracle output:
            Backint for Oracle output:                          Data Protection for SAP(R)
            Backint for Oracle output:
            Backint for Oracle output:              Interface between BR*Tools and Tivoli Storage Manager
            Backint for Oracle output:              - Version 6, Release 1, Modification 0.0  for Win x64 -
            Backint for Oracle output:                    Build: 358  compiled on Nov  4 2008
            Backint for Oracle output:         (c) Copyright IBM Corporation, 1996, 2008, All Rights Reserved.
            Backint for Oracle output:
            Backint for Oracle output: BKI2027I: Using TSM-API version 6.2.3.1 (compiled with 5.3.2.0).
            Backint for Oracle output: BKI2000I: Successfully connected to ProLE on port tdpr3ora64.
            Backint for Oracle output: BKI0005I: Start of program at: 08/31/11 10:05:12 .
            Backint for Oracle output: BKI1216E: There are no backup management classes available.
            Backint for Oracle output: BKI1215I: Average transmission rate was 0.000 GB/h (0.000 MB/sec).
            Backint for Oracle output: BKI1227I: Average compression factor was 1.000.
            Backint for Oracle output: BKI0020I: End of program at: 08/31/11 10:05:13 .
            Backint for Oracle output: BKI0021I: Elapsed time: 01 sec .
            Backint for Oracle output: BKI0024I: Return code is: 2.
            Backint for Oracle output:
            Backint for Oracle error output:
            Finished the backup unsuccessfully.
            #ERROR
    .\pipe\backup
    End of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
        Removed Backint for MaxDB's temporary output file 'G:\sapdb\data\wrk\backint\sapdb.out'.
        Copying error output of Backint for MaxDB to this file.
    Begin of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
            Backint for Oracle was unsuccessful.
    End of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
        Removed Backint for MaxDB's temporary error output file 'G:\sapdb\data\wrk\backint\sapdb.err'.
        Removed the Backint for MaxDB input file 'G:\sapdb\data\wrk\backint\sapdb.in'.
    Have finished clean up successfully.
    SAVE/RESTORE request:
    SAVE DATA CANCEL
    SAVE/RESTORE request accepted:
    OK
    SAVE/RESTORE result:
    ERR
    -24988,ERR_SQL: SQL error
    -104,DBM command impossible at this time
    3,Data backup failed
    Servertask Info: because Error in backup task occured
    Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
    Error in backup task occured, Error code 3700 "hostfile_error"
    Backupmedium #1 (
    .\pipe\backup) I/O Error
    Backup error occured, Error code 3700 "hostfile_error"
    DBA Action ends:
    Timestamp: 20110831100513   State:    Failure
    ===================================================================================================

    Hi Markus,
    Thanks for quick response. I did checked KNLMSG file and it has XML file kind of information where as dbm.prt has some information and here it is
    =================================================================================================
    2011-08-31 10:18:30 0x00009ecc INF          1 DBMSrvCo A DBM Server client connection was established at 2011-08-31 10:18:29 (client process has process ID 24352 on computer 10.1.47.21).
    2011-08-31 10:18:30 0x00009ecc INF        283 DBMSrv   Command 'auto_extend show' is being executed.
    2011-08-31 10:18:30 0x00009ecc INF        419 DBMSrv   Command 'auto_extend' has ended with return code 0.
    2011-08-31 10:18:30 0x00009ecc INF        283 DBMSrv   Command 'auto_update_statistics show' is being executed.
    2011-08-31 10:18:31 0x00009ecc INF        419 DBMSrv   Command 'auto_update_statistics' has ended with return code 0.
    2011-08-31 10:18:41 0x00009ecc INF        283 DBMSrv   Command 'backup_save "Backup" DATA RECOVERY' is being executed.
    2011-08-31 10:18:42 0x00009ecc INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00009ecc INF          8 DBMKnl   Statement:  SAVE DATA QUICK TO '
    .\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
    2011-08-31 10:19:47 0x00009ecc ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00009ecc ERR          9 DBMKnl   Statement:  SAVE DATA QUICK TO '
    .\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
                        0x00009ecc ERR         10 DBMKnl   Returncode: -903
                        0x00009ecc ERR          5 DBMKnl   Errortext:  Host file I/O error
    2011-08-31 10:19:47 0x00009ecc ERR     -24580 DBMSrv   ERR_COMMAND_FAILED: Command 'backup_save' has ended and failed with return code -24920.
                        0x00009ecc ERR     -24920 DBMSrv   ERR_BACKUPOP: backup operation was unsuccessful
                        0x00009ecc ERR     -24778 DBMSrv   The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
    2011-08-31 10:19:53 0x00009ecc INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 24352 on computer 10.1.47.21).
    2011-08-31 10:19:53 0x00009ecc INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00009ecc INF          8 DBMKnl   Statement:  SAVE DATA CANCEL
    2011-08-31 10:19:53 0x00009ecc ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00009ecc ERR          9 DBMKnl   Statement:  SAVE DATA CANCEL
                        0x00009ecc ERR         10 DBMKnl   Returncode: -104
                        0x00009ecc ERR          5 DBMKnl   Errortext:  DBM command impossible at this time

  • Error 1075: The dependency service does not exist or has been marked for deletion

    Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
    Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
    snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
    In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
    not exist or has been marked for deletion."
    Rebooting gets me nowhere.
    In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
    Any ideas, please?

    Hi,
    Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
    Kim Zhou
    TechNet Community Support

  • Report server error 1075

    I have installed 9iAS v 10222 enterprise edition on p4 machine.
    9iAS installed ok.
    but the report server installed by default with name
    Rep60_machine_name
    but application are using different name for the report server
    so I uninstalled the default report server by using the command
    rwmts60 -uninstall Rep60_machine_name.
    Now I installed the report server with the desired name using command
    rwmts60 -install newname -tcpip
    set the system account from services.
    and start the new report server. But the error occurs while starting the report server.
    the error message is
    error 1075 occured: The dependency service either does not exist or have been marked for deletion
    pls help
    Thanks in advance
    Regards
    Yogesh Kumar

    Hi,
    this is the Oracle Forms forum, you might have more luck in the Reports forum here Reports
    However, I guess you installed the reports server as a service under windows, right? Check the DependOnService registry key value under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\<reports server key>
    Uninstall the reports server using rwserver -uninstall <server_name> and reinstall it using rwserver -install <server_name> [batch=yes/no] [autostart=yes/no] with valid parameters.
    HTH
    Gerald.

  • Backup error due to System Writer missing (enumeration of system32 printer dlls takes too long)

    Hi,
    On a Windows 2008 R2 we get a Windows Backup error while backupping System State (event id: 5, error code: '2155347997').
    We tried *ALL* solutions found on Internet regarding the same issue (and we also applied the suggested hotfix KB2807849) but without success. So we DIGGED INTO VSS to see what is happening.
    ***1) First we saw that an USB printer had a problem and this resulted in
    hundreds of entries in the following registry keys:
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100010]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100011]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\Canon MF6500 Series #100012]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79590]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StillImage\DeviceNameStore\{6BDD1FC6-810F-11D0-BEC7-08002BE2092F}\79591]
    ***2) We completely removed ALL drivers/devices related to that printer (now the DeviceNameStore is empty and
    pnputil -e returns no driver related to the printer)
    ***3) Using process monitor we saw that during vssadmin list writers the system is searching for the DLLs related to that printer AND SEEMS CAUGHT IN AN ENDLESS LOOP: this is an excerpt of the scan:
    09:56:34,5205954    svchost.exe    324    RegSetValue    HKLM\System\CurrentControlSet\services\VSS\Diag\System Writer\IDENTIFY (Enter)    SUCCESS
    09:57:18,2310377 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnz005.icc NO SUCH FILE Filter: cnz005.icc
    09:57:18,2312877 svchost.exe 324 QueryDirectory C:\Windows\System32\spool\drivers\color\cnf6500m.icc NO SUCH FILE Filter: cnf6500m.icc
    09:57:18,2314854 svchost.exe 324 QueryDirectory C:\Windows\System32\cncmfp20.ini NO SUCH FILE Filter: cncmfp20.ini
    09:57:18,2316416 svchost.exe 324 QueryDirectory C:\Windows\System32\cnclsi20.dll NO SUCH FILE Filter: cnclsi20.dll
    ... and so on
    .... THE SAME FILES ARE REPEATED HUNDREDS OF TIMES!!!! ...
    It seems that somewhere there is a catalog of system files which still contains the references to the (same) files used by the hundreds of devices that WERE present in the DeviceNameStore (see point ***1 above, but now it is empty),  and the System
    Writer continues to search/enumerate those files and fails.
    How can I fix it ? Is there a way to "reset" the System Writer and "rebuild" (???) the correct files that it should backup? (in order to complete a successfull system state backup)
    Can you help me?
    Thank you in advance.
    EDIT: some additional (useful?) information:
    * we also ran chkdsk /f C: 
    * sfc /scannow completes without errors
    * in the vssadmin list writers the "system writer" is missing (but - as said above - when we run it the associated process repeatedly search printer dll files in the System32 directory)
    * perhaps those file are contained is some filemaps catalog ?!? Is there a way to "reset" them?!?
    ***EDIT 2***:
    I found that the reference to those missing DLLs are in ***C:\Windows\inf\setupapi.ev3*** but if I move the file away the System Writer continues not being listed in vssadmin list writer (though the vssadmin command complete very fast).
    This is what is happening:
    svchost.exe    324    CloseFile    C:\Windows\inf    SUCCESS    
    svchost.exe    324    CloseFile    C:\Windows\System32\DriverStore\infpub.dat    SUCCESS    
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\infpub.dat    ACCESS DENIED
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\infstor.dat    ACCESS DENIED
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\infstrng.dat    ACCESS DENIED
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\drvindex.dat    ACCESS DENIED
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\INFCACHE.0    NAME NOT FOUND
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\INFCACHE.1    ACCESS DENIED
    svchost.exe    324    CreateFile    C:\Windows\System32\DriverStore\INFCACHE.2    NAME NOT FOUND
    svchost.exe    324    CreateFile    C:\Windows\inf    SUCCESS
    svchost.exe    324    QueryBasicInformationFile    C:\Windows\inf    SUCCESS
    svchost.exe    324    RegCloseKey    HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup    SUCCESS    
    svchost.exe    324    CreateFile    C:\Windows\inf\setupapi.ev1    SUCCESS
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev1    SUCCESS
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev1
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev1    SUCCESS
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev1
    svchost.exe    324    CreateFile    C:\Windows\inf\setupapi.ev2    SUCCESS
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev2
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev2
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev2    SUCCESS
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev2
    svchost.exe    324    CreateFile    C:\Windows\inf\setupapi.ev3    SUCCESS
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev3
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev3
    svchost.exe    324    QueryStandardInformationFile    C:\Windows\inf\setupapi.ev3
    svchost.exe    324    CreateFileMapping    C:\Windows\inf\setupapi.ev3    SUCCESS
    svchost.exe    324    CreateFile    C:\Windows\System32\drivers    SUCCESS
    svchost.exe    324    QueryDirectory    C:\Windows\System32\drivers\acpi.sys    SUCCESS
    svchost.exe    324    QueryDirectory    C:\Windows\System32\drivers\rdpbus.sys    SUCCESS
    svchost.exe    324    QueryDirectory    C:\Windows\System32\drivers\i8042prt.sys    SUCCESS
    .... EVERYTHING IS OK UP TO HERE ...
    svchost.exe    324    CloseFile    C:\Windows\System32\drivers    SUCCESS
    svchost.exe    324    CreateFile    C:\Windows\System32    SUCCESS
    svchost.exe    324    QueryDirectory    C:\Windows\System32\cncc6500.dll    NO SUCH FILE    Filter: cncc6500.dll
    svchost.exe    324    QueryDirectory    C:\Windows\System32\cnci6500.dll    NO SUCH FILE    Filter: cnci6500.dll
    svchost.exe    324    QueryDirectory    C:\Windows\System32\cncc6500.dll    NO SUCH FILE    Filter: cncc6500.dll
    svchost.exe    324    QueryDirectory    C:\Windows\System32\cnci6500.dll    NO SUCH FILE    Filter: cnci6500.dll
    ... !!!!!GET CAUGHT IN AN ENDLESS LOOP!!!!!!!! (System Writer probably ends for timeout)...
    Is there a way to rebuild/modify that file C:\Windows\inf\setupapi.ev3
    Perhaps I can delete the catroot2 directory?

    Hi,
    Please check if there are number of files in Temporary ASP.NET folders under "C:\Windows\Microsoft.Net\Framework". If so, clear these files then restart the server to check the results.
    In additional, you could try the steps below to troubleshoot the issue:
    1. Give NETWORK SERVICE Read permissions on COM+ Event System.
    a. Open the registry editor and navigate to HKLM\CurrentControlSet\Services\EventSystem.
    b. Right click on the EventSystem and then select ‘Permissions’
    c. Click on ‘ADD’ button and then type in ‘NETWORK SERVICE’ and give it READ permission.
    d. Reboot the machine and then run the 'VSS admin list writers' to check if it shows up the 'system writer'.
    2. If the step 1 doesn't work then move the contents of C:\Windows\winsxs\FileMaps to an alternate location. Then run the command 'VSS admin list writers' to check if it shows up the 'system writer'.  Is so, some of those files maybe corrupted and we
    need to identify them and replace the files from a healthy machine.
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • JDeveloper 11.1.2.0.0 Version Application wizard : File Backup Error

    hi
    As shown in the scenario (sc1) screencast at http://screencast.com/t/GA7OcgYZ
    the JDeveloper 11.1.2.0.0 Version Application wizard can fail sometimes, showing a "File Backup Error" dialog, with the message
    "Failed attempting to back up imported resource
    D:\screencast\VersionAppLockedIssueApp-v0.01\VersionAppLockedIssueApp\Model.
    Check that there are no file system explorers viewing files in this location and that none of the files are open in other applications before resuming."
    This even occurs when there are no other processes (like Windows Explorer or an editor) using/locking the file.
    It should be possible to reproduce the behaviour using the example application
    at http://www.consideringred.com/files/oracle/2011/VersionAppLockedIssueApp-v0.01.zip
    which is really nothing special I think, so it might also reproduce using another application.
    First open the application and also open the file "browseEmployees.jsf" in design view.
    After that, as it seems, the Version Application wizard fails.
    Note that it might be relevant that I am using Windows 7, as I can imagine that this could behave differently when using JDeveloper on other operating systems.
    Also note, if I try to ZIP the application folder (instead of using the Version Application wizard) after opening the file "browseEmployees.jsf" in design view, I get a message like "WARNING: The process cannot access the file because it is being used by another process.
    : D:\screencast\VersionAppLockedIssueApp-v0.01\VersionAppLockedIssueApp\.data\00000000\je.lck ",
    as can be seen in the scenario (sc2) screencast at http://screencast.com/t/rFiL47Bil
    As it seems that the Version Application wizard has managed to commit the source files, one workaround could be to checkout the source in another location and continue working there.
    Other suggestions to avoid this issue, or deal with it, are welcome.
    questions:
    - (q1) Can this "File Backup Error" behaviour for the Version Application wizard be reproduced?
    - (q2) How can this "File Backup Error" behaviour for the Version Application wizard be explained?
    many thanks
    Jan Vervecken

    fyi
    Today I noticed that there is a My Oracle Support note about this:
    - note id 1353389.1 , "In JDeveloper11.1.2.0.0 the Version Application Wizard Failed with the Error: File Backup Error "
    Its "Solution" section currently says:
    "The problem is still investigated by development.
    But there is a possible workaround for Bug 12912410 by unchecking the checkbox 'Perform Checkout' in step 5 of 6 in the wizard screen. "
    regards
    Jan

  • Time machine backup error in Mavericks

    I"m getting backup errors in Mavericks when it tries to back up to the Backups.backupdb folder in my 3TB external backup drive.  This happens even when I turn Time Machine off! 
    This is the error I'm getting (taken from the console) when I manually start a time machine backup:
    10/26/13 9:56:39.268 AM com.apple.backupd[18160]: Starting manual backup
    10/26/13 9:56:40.826 AM com.apple.backupd[18160]: Backing up to /dev/disk2s2: /Volumes/Macbook Pro Backup 3TB/Backups.backupdb
    10/26/13 9:56:46.069 AM com.apple.backupd[18160]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Macbook Pro Backup 3TB/Backups.backupdb/Macbook Pro 25 size:37
    10/26/13 9:56:46.070 AM com.apple.backupd[18160]: Backup failed with error 2: 2
    Has anyone seen this?  At this point, I haven't been able to back up anything after upgrading to Mavericks, and I really don't want to delete the backup folder and start over.
    I thought it might be a permissions problem, so I tried to use the disk utility to verify this.  I wasn't able to select verify or repair disk permissions.  When I tried to verify the disk, I got a 'Live file system repair is not supported' error.  I've never seen this before.
    Any thoughts on all of this?

    I fixed this by hard booting, then repairing the disk.  A restart didn't work. 

  • Server service does not start, error 1075

    "Could not start the Server service on Local Computer - Error 1075:  The dependency  service does not exist or has been marked for deletion"
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Srv]
    "Type"=dword:00000002
    "Start"=dword:00000003
    "ErrorControl"=dword:00000001
    "Tag"=dword:00000006
    "ImagePath"=hex(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
      52,00,49,00,56,00,45,00,52,00,53,00,5c,00,73,00,72,00,76,00,2e,00,73,00,79,\
      00,73,00,00,00
    "DisplayName"="Srv"
    "Group"="Network"
    "Description"="Srv"
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Srv\Security]
    "Security"=hex:01,00,14,80,b8,00,00,00,c4,00,00,00,14,00,00,00,30,00,00,00,02,\
      00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
      00,00,02,00,88,00,06,00,00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,\
      05,12,00,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,\
      20,02,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,04,00,00,00,00,\
      00,14,00,8d,01,02,00,01,01,00,00,00,00,00,05,06,00,00,00,00,00,14,00,00,01,\
      00,00,01,01,00,00,00,00,00,05,0b,00,00,00,00,00,18,00,fd,01,02,00,01,02,00,\
      00,00,00,00,05,20,00,00,00,23,02,00,00,01,01,00,00,00,00,00,05,12,00,00,00,\
      01,01,00,00,00,00,00,05,12,00,00,00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Srv\Enum]
    "0"="Root\\LEGACY_SRV\\0000"
    "Count"=dword:00000001
    "NextInstance"=dword:00000001
    Windows Registry Editor Version 5.00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT]
    "Type"=dword:00000001
    "Start"=dword:00000001
    "ErrorControl"=dword:00000001
    "Tag"=dword:00000005
    "ImagePath"=hex(2):73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,44,00,\
      52,00,49,00,56,00,45,00,52,00,53,00,5c,00,6e,00,65,00,74,00,62,00,74,00,2e,\
      00,73,00,79,00,73,00,00,00
    "DisplayName"="NetBios over Tcpip"
    "Group"="PNP_TDI"
    "DependOnService"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
    "DependOnGroup"=hex(7):00,00
    "Description"="NetBios over Tcpip"
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Linkage]
    "OtherDependencies"=hex(7):54,00,63,00,70,00,69,00,70,00,00,00,00,00
    "Bind"=hex(7):5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,00,54,00,63,00,70,\
      00,69,00,70,00,5f,00,7b,00,45,00,42,00,33,00,44,00,36,00,31,00,41,00,42,00,\
      2d,00,43,00,30,00,43,00,38,00,2d,00,34,00,38,00,35,00,35,00,2d,00,41,00,37,\
      00,45,00,38,00,2d,00,42,00,46,00,38,00,38,00,32,00,36,00,33,00,37,00,32,00,\
      30,00,41,00,31,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,\
      00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,43,00,36,00,39,00,31,00,43,00,\
      30,00,42,00,35,00,2d,00,30,00,38,00,35,00,41,00,2d,00,34,00,35,00,41,00,41,\
      00,2d,00,39,00,36,00,42,00,35,00,2d,00,35,00,41,00,43,00,36,00,44,00,33,00,\
      37,00,35,00,35,00,36,00,33,00,39,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,\
      00,63,00,65,00,5c,00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,38,00,34,00,\
      38,00,38,00,33,00,35,00,46,00,34,00,2d,00,33,00,37,00,41,00,41,00,2d,00,34,\
      00,32,00,44,00,39,00,2d,00,41,00,34,00,45,00,31,00,2d,00,34,00,41,00,46,00,\
      32,00,43,00,44,00,44,00,30,00,31,00,37,00,35,00,30,00,7d,00,00,00,5c,00,44,\
      00,65,00,76,00,69,00,63,00,65,00,5c,00,54,00,63,00,70,00,69,00,70,00,5f,00,\
      7b,00,45,00,38,00,33,00,34,00,42,00,34,00,41,00,38,00,2d,00,37,00,37,00,31,\
      00,46,00,2d,00,34,00,31,00,37,00,42,00,2d,00,38,00,33,00,46,00,39,00,2d,00,\
      39,00,39,00,39,00,32,00,42,00,38,00,41,00,43,00,41,00,43,00,45,00,42,00,7d,\
      00,00,00,00,00
    "Route"=hex(7):22,00,54,00,63,00,70,00,69,00,70,00,22,00,20,00,22,00,7b,00,45,\
      00,42,00,33,00,44,00,36,00,31,00,41,00,42,00,2d,00,43,00,30,00,43,00,38,00,\
      2d,00,34,00,38,00,35,00,35,00,2d,00,41,00,37,00,45,00,38,00,2d,00,42,00,46,\
      00,38,00,38,00,32,00,36,00,33,00,37,00,32,00,30,00,41,00,31,00,7d,00,22,00,\
      00,00,22,00,54,00,63,00,70,00,69,00,70,00,22,00,20,00,22,00,7b,00,43,00,36,\
      00,39,00,31,00,43,00,30,00,42,00,35,00,2d,00,30,00,38,00,35,00,41,00,2d,00,\
      34,00,35,00,41,00,41,00,2d,00,39,00,36,00,42,00,35,00,2d,00,35,00,41,00,43,\
      00,36,00,44,00,33,00,37,00,35,00,35,00,36,00,33,00,39,00,7d,00,22,00,00,00,\
      22,00,54,00,63,00,70,00,69,00,70,00,22,00,20,00,22,00,4e,00,64,00,69,00,73,\
      00,57,00,61,00,6e,00,49,00,70,00,22,00,00,00,00,00
    "Export"=hex(7):5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,00,4e,00,65,00,74,\
      00,42,00,54,00,5f,00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,45,00,42,00,\
      33,00,44,00,36,00,31,00,41,00,42,00,2d,00,43,00,30,00,43,00,38,00,2d,00,34,\
      00,38,00,35,00,35,00,2d,00,41,00,37,00,45,00,38,00,2d,00,42,00,46,00,38,00,\
      38,00,32,00,36,00,33,00,37,00,32,00,30,00,41,00,31,00,7d,00,00,00,5c,00,44,\
      00,65,00,76,00,69,00,63,00,65,00,5c,00,4e,00,65,00,74,00,42,00,54,00,5f,00,\
      54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,43,00,36,00,39,00,31,00,43,00,30,\
      00,42,00,35,00,2d,00,30,00,38,00,35,00,41,00,2d,00,34,00,35,00,41,00,41,00,\
      2d,00,39,00,36,00,42,00,35,00,2d,00,35,00,41,00,43,00,36,00,44,00,33,00,37,\
      00,35,00,35,00,36,00,33,00,39,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,00,\
      63,00,65,00,5c,00,4e,00,65,00,74,00,42,00,54,00,5f,00,54,00,63,00,70,00,69,\
      00,70,00,5f,00,7b,00,38,00,34,00,38,00,38,00,33,00,35,00,46,00,34,00,2d,00,\
      33,00,37,00,41,00,41,00,2d,00,34,00,32,00,44,00,39,00,2d,00,41,00,34,00,45,\
      00,31,00,2d,00,34,00,41,00,46,00,32,00,43,00,44,00,44,00,30,00,31,00,37,00,\
      35,00,30,00,7d,00,00,00,5c,00,44,00,65,00,76,00,69,00,63,00,65,00,5c,00,4e,\
      00,65,00,74,00,42,00,54,00,5f,00,54,00,63,00,70,00,69,00,70,00,5f,00,7b,00,\
      45,00,38,00,33,00,34,00,42,00,34,00,41,00,38,00,2d,00,37,00,37,00,31,00,46,\
      00,2d,00,34,00,31,00,37,00,42,00,2d,00,38,00,33,00,46,00,39,00,2d,00,39,00,\
      39,00,39,00,32,00,42,00,38,00,41,00,43,00,41,00,43,00,45,00,42,00,7d,00,00,\
      00,00,00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters]
    "NbProvider"="_tcp"
    "NameServerPort"=dword:00000089
    "CacheTimeout"=dword:000927c0
    "BcastNameQueryCount"=dword:00000003
    "BcastQueryTimeout"=dword:000002ee
    "NameSrvQueryCount"=dword:00000003
    "NameSrvQueryTimeout"=dword:000005dc
    "Size/Small/Medium/Large"=dword:00000001
    "SessionKeepAlive"=dword:0036ee80
    "TransportBindName"="\\Device\\"
    "EnableLMHOSTS"=dword:00000001
    "EnableProxy"=dword:00000002
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces]
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{848835F4-37AA-42D9-A4E1-4AF2CDD01750}]
    "NameServerList"=hex(7):00,00,00,00
    "RASFlags"=dword:00000001
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{C691C0B5-085A-45AA-96B5-5AC6D3755639}]
    "NameServerList"=hex(7):00,00
    "NetbiosOptions"=dword:00000002
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{E834B4A8-771F-417B-83F9-9992B8ACACEB}]
    "NameServerList"=hex(7):00,00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Parameters\Interfaces\Tcpip_{EB3D61AB-C0C8-4855-A7E8-BF88263720A1}]
    "NameServerList"=hex(7):00,00
    "NetbiosOptions"=dword:00000002
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Security]
    "Security"=hex:01,00,14,80,e8,00,00,00,f4,00,00,00,14,00,00,00,30,00,00,00,02,\
      00,1c,00,01,00,00,00,02,80,14,00,ff,01,0f,00,01,01,00,00,00,00,00,01,00,00,\
      00,00,02,00,b8,00,08,00,00,00,00,00,14,00,8d,01,02,00,01,01,00,00,00,00,00,\
      05,0b,00,00,00,00,00,18,00,9d,01,02,00,01,02,00,00,00,00,00,05,20,00,00,00,\
      23,02,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,20,\
      02,00,00,00,00,18,00,ff,01,0f,00,01,02,00,00,00,00,00,05,20,00,00,00,25,02,\
      00,00,00,00,14,00,fd,01,02,00,01,01,00,00,00,00,00,05,12,00,00,00,00,00,14,\
      00,40,00,00,00,01,01,00,00,00,00,00,05,13,00,00,00,00,00,14,00,40,00,00,00,\
      01,01,00,00,00,00,00,05,14,00,00,00,00,00,18,00,9d,01,02,00,01,02,00,00,00,\
      00,00,05,20,00,00,00,2c,02,00,00,01,01,00,00,00,00,00,05,12,00,00,00,01,01,\
      00,00,00,00,00,05,12,00,00,00
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBT\Enum]
    "0"="Root\\LEGACY_NETBT\\0000"
    "Count"=dword:00000001
    "NextInstance"=dword:00000001
    c:\windows\system32\drivers
    srv.sys
    5.2.3790.4832 (srv03_sp2_gdr.110217-0526)
    mrxsmb.sys
    5.2.3790.4883 (srv03_sp2_gdr.110706-0334)
    rdbss.sys
    5.2.3790.4671 (srv03_sp2_gdr.100224-1541)

    Hi jenhwa,
    Please run
    sfc /scannow command to scan all protected system files. Any find?
    In addition, please type
    Regedit in RUN to open Registry Editor, then follow the path:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer
    Please right-click the
    DependOnService entry, and then click "Modify...".
    In the Value data box, please check if just has
    SamSSand
    Srv services.
    In addition, please check the System event log if find relevant errors.
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Restoring iTunes Backup Error

    I have 8 DVDs of a backup I did on my PC before I restored it. iTunes will backup the first DVD fine. When I put in my second DVD, I get the error "unknown error occurred (-69)". Also if I try to load the disc later, iTunes just freezes up until I eject the disc.
    Edit: Also I tried to contact Apple but they actually have no way to contact them about backup errors.
    Message was edited by: thaychris

    I have exactly the same problem - 1st DVD worked fine, 2nd worked until 255 song out of 721 and the other 4 dvds just cause itunes and my whole laptop to crash Since I'd made the original dvd backup I did an incremental back up using cds - these have worked fine. Beginning to wonder if the dvds just hold too much data for itunes to be able to copy from dvd at one time. Let me know if you find out anything new and good luck. Thanks.

  • I cant update my iphone4 to IOS6 because of a backup error, -43.

    Hmm... not quite sure what else I need to say. Just to re-state my question: I cant update my iphone4 to IOS6 because of a backup error, -43.

    Hi, and welcome to the community!
    So was this Spotify account originally created with facebook and not created with Spotify then linked to facebook? It sounds like it if you login with an email.
    Can you log in on the Spotify web player?
    Anthony

  • ITunes[260:16443]: iTunes: Backup error -30

    When I try to synchronize my iPhone I always have the save message : Unable to backup the iPhone...
    When I look at the Console, I read the following message
    iTunes[260:16443]: iTunes: Backup error -30
    Could someone help me ?

    I had the same error and just fixed it.
    I'd moved the backup files to an external drive then deleted them from the library, but even without old backups, the process failed.
    I tried many of the suggestions I found in other threads, but it still wouldn't work.
    Eventually I tried unchecking the "Encrypt iPhone Backup" My previous backups were encrypted with a password, so when I unchecked the box, I was prompted for that password, which let me remove the encryption.
    I then rechecked the box, entered in a "new" password, but I used the same one as before. The back up ran and showed progress in a pop-up window. A few minutes later, it was done.
    I've since tested it through the normal process and everything is working again.
    Hope this helps.

  • Wenever i try to install 2.0, i get backup error

    guys, when i try to install the new 2.0 update, i get this backup error (-5000) which says that it like wont work, and if i continue it will erase like everything on my ipod? i click cancel cuz i think that would be horibble if it did that! what should i do?! because i want to use these apps like soon!!! please please help!

    probably the continue would be faster and you can get your stuff back on both of them but the restore you would have to put you're settings back because you should'nt back up settings because it will ask you that. For your'e problems, yes, you should'nt back settings up

  • SBO Backup. ¿Incorpora planificador con borrado ciclico de copias?

    SBO Backup, ¿ha incorporado la utilidad que si tiene SQL Server de permitir que se progranmen copias con una duración determinada dentro del plan de copias de seguridad de la empresa?

    Hola.
    Mediante el SBO Backup no sé si se puede realizar ya que no he profundizado en su uso. Lo que si puedo decirte es que mediante al SQL Management Studio puedes crearte copias de seguridad programadas en la periodicidad que tu elijas y definir cuantos días estarán dichas copias sin ser borradas en el servidor.
    Un saludo.

Maybe you are looking for

  • Document not opening in Leopard

    Has anyone experienced problems with opening documents? I have all the current updates installed and most of the time things work quite well in Leopard, but not as reliably as they did in Panther on my old Power Book G4. Sometimes documents will not

  • Enterprise 250 server problem

    Hi, I have sun etnerprise 250 server. When I start the server power is on, but its not showing any display on monitor. I think I have to reset my bios setup. how can reset the bois setting. Could any one tell how to reset this bios setup? If this pro

  • App to prevent account holder from seeing who I'm talking to

    Okay, Interesting situation here. I'm a college student who has just realized that my parents are keeping tabs on who I'm talking to through verizon. Is there an application out there that can hide on the verizon website from my parents who it is tha

  • Debug privilege - is it at object level or user level or both?

    Just want to know at what level Debug privilege can be granted? At object level or user-level or both? I'm under the impression that if an user say 'A' is given this privilege, then he can debug all the procedures/packages/objects in his schema . I g

  • 8330 Calendar Deleting appts current year only

    My phone is deleting all appointments from the history for 2010 only.  I have the settings to save forever.  All my history from previous years is still showing up. This is not a low memory issue and I dont sync this with my computer so it has nothin