SBO Backup not backing up one of the Company Database

Hi Expert,
My customer environment is :-
Windows Server 2008 R2 SP1
MS-SQL 2005 SP3
SAP B1 2007B PL15 Hotfix
There are 8 company databases ticked in SBO Backup Database tab. 7 of them are backup successfully at the scheduled time, except 1. The MDF file is 3GB and the LDF file is around 800MB. There are still around 45GB free disk spaces remaining in this drive.
May i know why this database not backup?
Thanks,
Taw-Fey
Edited by: Taw Fey Tan on Mar 22, 2011 8:49 AM

Hi Bala,
I have tried to just run SBO Backup for that particular company. Still no backup happen.
But there is an error in Windows Event Viewer Application Log with SBO Backup.
ERROR
The description for Event ID 166 from source SBOBackUp cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
The specified resource type cannot be found in the image file
Please advice what else should i do, thanks.
Taw-Fey, Tan

Similar Messages

  • Time Machine did not back up one of the user accounts

    Hi All,
           I just notice that time machine stops backing up one of my user accounts. So I created a new admin account to test it and that new account was backed up. I did turn on File Vault. I am using Lion 10.7.3. Thanks for any advice!!!

    FanApple wrote:
    Hi Pondini,
            Thank you for your reply. I am not transfering from SL to Lion.
    So you have File Vault 2 turned on, not File Vault1, correct?
    Time Machine no longer back up one of my accounts. Time machine used to back up that account but not any more.
    That sounds like either it's been excluded, or the preferences file (where the exclusions and other things are kept) is corrupted.  Try a "full reset" of Time Machine, per #A4 in Time Machine - Troubleshooting.
    I think I changed on/off local snapshot for time machine back up by running sudo tmutil disablelocal/enablelocal l don't think that would effect my time machine behavior.
    No, that won't change what is or isn't backed-up.
    So l launch Migration Assistant and Migration Assistant dosen't recognize my external TM backup. It shows my hard drive and a network drive (Time Capsule).
    That display is misleading:  if it shows a yellow or green icon and the name of your Mac and HD, instead of the name of the drive the backup are on, those are your backups. 
    If not, the backups may be damaged.  Try to repair them, per #A5 in Time Machine - Troubleshooting.
    Or, if you excluded System files and Applications from backups, they won't show up there at all.
    Now I am thinking of deleting my account and creating it again and try to back up with time machine and see whether it would work or not and roll back my TM backup .
    Don't do that.  You risk losing everything that way!

  • I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet "

    iTunes told me to delete my backup folder when I was having problems syncing my phone to my computer. After that it wouldn't work at all. After trying and trying I deleted iTunes when it said "iTunes could not back up iPhone because the backup could not be saved on the computer"and now it wont let me install it again and keeps saying "itunes cannot be installed because the file cannot be found in the cabinet ". What the **** itunes? Nothing is working!!
    I wanted to update my iTunes so I could sync my phone to my computer and update my phones software so I can use the latest apps that need a 4.2 or higher.
    This is not fun for me so if anyone knows what I can do to fix this please help. Is it possible to download the "cabinent file" with the lastest iTunes?
    Thank you.
    -Kait
    My phone is the iPhone4 and my computer is a Windows Vista

    I doubt that corrupt files are the problem. It is more likely a space or permissions issue. Is the hard-drive on which iTunes is stored close to capacity? Do you (or the particular user profile you have logged on with) have the requisite permissions to save to that drive?
    Otherwise, do you get an error code? This might point us in the right direction.

  • "USB Device Not Recognized. One of the USB devices has malfunctioned..."

    I'm running Windows XP with external hard drive. When hard drive is connected, iPod will not sync and I get message stating "USB Device Not Recognized. One of the USB devices has malfunctioned..."
    When disconnect the external drive, he iPod appears in My Computer. However, iTunes is on external drive; therefore music is not syncing onto iPod. I've attempted the 5 R's as well as searching for iPod in Device Mananger. When iPod is conncected, it is listed in Devce Manage as "Unknown Device."
    I've changed drive letters on boh iPod and external drive and get the same message. Please help.

    QRe: Zen MX Causes "USB Hardware has Malfunctioned" Msg from Windows XpyUhh, Yes.
    I used to same cable to attach my Motorola Razr and the computer correctly found it and identified it as such.
    I also tried another cable (brand new) same thing.
    I went to recovery mode and did a "CLEAN UP" but no dice.
    I also got my I.S. tech guy to look into it and on the USB page it say "UNKNOWN DEVICE"? when he tried to delete it it did not help, it just reappears as "UDVC"? Also in looking into it it seems to have no drivers.
    He came to this site and tried to do somethinm through here but it did'nt work.
    Now in listening to it last night it began to 'skip' or what I call 'HICCUP" terribly. Where a song starts and stops, during the middle of it. ? It's always done it a little but it has been getting more and more common and now? It's WAY worse about it.
    It has never been dropped, or nishandled in any way. I bought the clear hard case to protect it. And only has about 300 songs on it. Never used for anything else. No vids no pics, nothing.

  • Today I deleted an email services I no longer need. Now when I go to the notes app I no longer have any notes.  Is there any way to get my notes back. I have the first iPad running iOS 5.1.1

    Today I deleted an email services I no longer need. Now when I go to the notes app I no longer have any notes.  Is there any way to get my notes back. I have the first iPad running iOS 5.1.1

    Ah, well, then the notes are probably gone. Did you save any of the email from that account on your computer? The notes might be there if you did.

  • I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

    I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

    More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

  • HT5552 are debit cards not accepted as one of the payment methods?

    are debit cards not accepted as one of the payment methods?

    This is a user to user forum, so why, we couldn't answer.
    I found the following for you:
    The Mac App Store, App Store and iBookstore services (the "Stores") accept credit cards issued by banks in India or Content Codes as forms of payment. iTunes may obtain preapproval for an amount up to the amount of the order. Billing occurs at the time of or shortly after your transaction. If you are using 1-Click purchasing, your order may be authorized and billed in increments during one purchasing session, so it may appear as multiple orders on your statement. When making purchases, content credits are used first; your credit card is then charged for any remaining balance.
    This is a long link, but if you read throught it, you'll find more information: http://www.apple.com/legal/itunes/appstore/in/terms.html
    Otherwise, you should contact Apple Direction for an answer.

  • The message "iPad Not Backed Up" appears on the screen and will not go away, even after I push the "OK" button. What can I do?

    The message "iPad Not Backed Up" appears on the screen and will not go away, even after I push the "OK" button. What can I do?

    rodrocket wrote:
    ... What can I do?
    Perform a Reset...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

  • I have a tiscali email account set up on my iPhone it receives emails but will not send - any one had the same issue ?

    I have a tiscali email account set up on my iPhone it receives emails but will not send - any one had the same issue ?

    Of course you can't it is a generic document for use worldwide on every carrier mail service
    The link will tell you how to set up with the info you will have received from TalkTalk when they installed your broadband
    You just add that info for SMTP settings
    in iPhone
    settings>>>>mail contacts a7 calendars>>>chose relevant service (tiscali or TT which ever it is called >>>outgoing mail server
    all as decribed in the above document
    now read the doc again and follow the instructions once you have established the correct settings from your
    TT documentation

  • Imessage not working on one of the phones associated with my account although imessage is turned on

    have imessage on but imessage not working on one of the iphones associated with my account

    The following may help http://support.apple.com/kb/ts2755

  • P6 user name is not valid for connecting to the reporting database

    No data is available because your P6 user name is not valid for connecting to the reporting database
    I am getting above error in the following environment:
    P6 running on wls instance 1.
    BI Publisger running on wls instance 2
    MS SQL server 2005
    Note that the error appears when I clink on the 'Reports' tab in P6. My admin user on P6 has access to report/analyser modules.
    To connect P6 to BI Publisher I am using 'PxRptUser' in the P6 configuration for Bi Publisher. I know as well that the WSDL URL is correct and I can test this in SoapUI tool.
    In BI publisher I have created the PMDB data source using PxRprUser, and the test of this connection works.
    (Because the report samples come with Oracle flavoured SQL that SQL server does not like, I have configured BI Publisher so I have just a single report left that sources it data from an xml file. This works in BI Publisher. It also helps me in that I do not need to add 'WHERE' clauses and parameters required for SQL server?)
    Furthermore, using a DB tool, I can connect to my SQL server using PxRPTUser.
    So why do I get the error above?
    I picked up somewhere that I should not be adding users to BI Publisher. Funny enough, testing the 'login' method the BI Publisher exposes through its WSDL (as above) I noticed I HAD to create the user PxRptUser in BI publisher application itself (on top of PxRptUser in database) for the login web service to work with PxRptUser
    That did not solve the connection between P6 and BI Publisher though. What am I missing ...
    Edited by: user3674522 on 10/11/2011 20:16

    Thought I found something but can't repliacte, som issue is still there:
    Had a look at the wls instance logs where BI publisher is running, and the error I get is:
    111111_023646955][][ERROR] javax.naming.NamingException: Unresolved naming: cn=admin, dc=user, dc=users, dc=principals at [cn=admin]
    That user, admin, is the one I have used to access P6. Why is this passed on to BI Publisher? I thought the idea was that the PxRptUser set in BI Publisher configurations in P6 would be used?
    Edited by: user3674522 on 10/11/2011 20:17

  • There has been no signal in Springdale, UT for hours today. there is no way to contact Verizon (Calling or Web Chat). Service has been deteriorating for the past two years in the area. Worse fact is no one at the company seems to care. Right now the immed

    There has been no signal in Springdale, UT for hours today. there is no way to contact Verizon (Calling or Web Chat). Service has been deteriorating for the past two years in the area. Worse fact is no one at the company seems to care. Right now the immediate issue is no service. I cannot do business this way.

    You used the data.  Verizon can not see what it was sued for.  However your phone can see whats apps used the data.  go to settings-data usage- there will be a place that says data usage cycle.  line the dates up with your cycle.  then there will be a bar graph below that   extend bother white bars one all the way to the left and one all the way to the right.  after those are extended below that will be a list of apps,  there should be one that used over 2 gb and that will show you what app used that data in her purse

  • Windows 7 Backups: Getting Back to Vista from the Brink

    I need an ironclad contingency plan to back up my data so that I can test Windows 7 Beta.  I only have one computer.  It's a laptop with a relatively modest hard drive, so dual booting is not an option for me.  I am not a developer, but I consider myself more skilled than a non-technical computer user, having dealt with software and hardware issues on my own in the past.  I am familiar with computer backups as far as making them, but I never have had to use one to recover my data.  I am curious to read your thoughts on my Windows 7 backup recovery plan, which is below.
    Before installing Windows 7, my plan is to use  the Windows Complete PC Backup and Restore tool to create an image of my hard drive on an external USB hard drive.  After installing Windows 7, I would then back up periodically my files and folders using the Windows backup tool, assuming it is like the one in my Vista Business OS.  These files would be saved on the USB hard drive, too.  If Windows 7 does not work out for me, then I would use the image from the external hard drive in the Windows recovery environment to restore my computer to its state just before the Beta installation.  Then, I would take the periodic file backup from the USB to restore my files (being aware that this would not recover my program-related data).  
    I think that this plan ought to work for two reasons.  First, the Windows Complete PC Backup and Restore tool seems pretty reliable, as it is designed to recover even from hardware failures.  The recovery should be straight-forward.  I assume that because I run a machine with an OS hard drive partition rather than a recovery/installation disc, I would access the Windows recovery environment either through F8 or the ThinkVantage button on startup (fortunately, I've never had to recover on my machine).  Then, I would restore my hard drive.  
    Second, it appears from the release notes that backup files created in Windows 7 are recoverable in Windows Vista.  To make this happen, the release notes describe a relatively simple work-around that apparently only involves moving a file in the backup folder to a different location.  
    What are your thoughts on this contingency plan?  Do I need to reformat my laptop before doing the recovery plan?  Do any other risks of data loss exist beyond those inherent in an ordinary backup plan, like Windows 7 producing some kind of corrupt backup file? Thanks!

    I appreciate your advice.  I am aware of the risks involved, such as the Beta expiring in August and the lack of official Microsoft support.  I do use my computer day-in and day-out, but as a student, not as a professional. Still, based on the positive reviews of the Beta that I have read so far, it appears that the Beta generally runs well.  In fact, it is faster than Vista on startup and shutdown, which is one of features I am most interested in.  The Beta also uses power more efficiently.  This is great for me as my battery life has deteriorated over the one-and-half-years that I have used my computer.  Given that all I do is web browse and use MS Office 2007, I would not anticipate any major software conflicts--just a (hopefully) smoother and cooler (I use an X61 tablet) computing experience.
    So, I just want to know whether my backup would work.  Then I'll make the decision on whether to go through with the hassle of worrying about restoring my files at some point in the future, either because the Beta doesn't work out or because the Beta has expired.

  • Listener not working in one of the servers of the Standby site

    Hello,
    The system is a RAC with two servers working as Primary site, and two servers working as Standby site.
    Both servers of the Primary site are sending redo logs to one of the servers of the Standby site. The other server of the Standby site is not receiving any redo log.
    I have checked the listener.ora and the tnsnames.ora files of the server that is not receiving and it is well configured comparing it with the server that is receiving the redo logs.
    If I check the status of the listener: lsnrctl status listener_<node name>
    Both of the Standby servers look fine.
    But if I connect directly to the database...
    In the 1st server of the Standby, the IP appears:
    SQL> show parameter listener
    NAME TYPE VALUE
    local_listener string (ADDRESS = (PROTOCOL = TCP)(HOST = xxx.xxx.xxx.xxx)(PORT = xxxx))
    remote_listener string LISTENERS_DB
    Nevertheless, in the second server of the Standby site, the one that is not receiving the redo logs, the IP does not appear:
    SQL> show parameter listener
    NAME TYPE VALUE
    local_listener string (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT = xxxx))
    remote_listener string LISTENERS_DB
    I have found the following to reload the listener:
    Oracle# lsnrctl reload listener_`hostname`
    Oracle# lsnrctl reload listener_standby
    Has anyone tried this? Did it work? It can be run without affecting the sytem, Dataguard, replication..., right?
    If you have another idea to fix this, let me know please.
    Thank you ;)
    Edited by: user11281526 on 29-oct-2009 4:35
    Edited by: user11281526 on 30-oct-2009 7:36
    Edited by: user11281526 on 31-oct-2009 4:11

    If I see the status of the listener_standby in the second server of the Standby site, the one that it is not receiving redo logs, it looks like it is fine. Why?
    #lsnrctl status listener_standby
    LSNRCTL for Solaris: Version 10.1.0.4.0 - Production on dd-mm-yyyy hh:mm:ss
    Copyright (c) 1991, 2004, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=IP_second_server_standby)(PORT=xxxx)))
    STATUS of the LISTENER
    Alias listener_standby
    Version TNSLSNR for Solaris: Version 10.1.0.4.0 - Production
    Start Date dd-mm-yyyy hh:mm:ss
    Uptime xx days yy hr. zz min.
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /opt/oracle/product/10.1.0/db_1/network/admin/listener.ora
    Listener Log File /opt/oracle/product/10.1.0/db_1/network/log/listener_standby.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=IP_second_server_standby)(PORT=xxxx)))
    Services Summary...
    Service "DB1" has 1 instance(s).
    Instance "DB1", status UNKNOWN, has 1 handler(s) for this service...
    The command completed successfully
    Edited by: user11281526 on 29-oct-2009 6:41
    Edited by: user11281526 on 29-oct-2009 6:42
    Edited by: user11281526 on 29-oct-2009 6:43

  • The data is not saved in one of the LOV field

    Hi all,
    I have two forms in two different pages, both are pretty much identical, except here and there show/hide some of the field and different LOV values. One of the form is working fine, but other form is giving me trouble. There is an LOV in that form, giving and returning proper value. (I checked it with java script alert). But it is not saving in the database. I tried to upload the files to the OTN, but since i could not upload the whole application because of data complexity, I am not able to successfully upload that into the application. (But it is in the Export Repository). As far as I checked, I copied the working form page into not working form page and make the necessary changes. I did not change any property specifically to that field. Any idea what I should be looking into. Thanks.
    Soe

    Hi Andy,
    Thank you very much for your response. I tried what you have suggested. But still it was not working. But what I found out was it is not displaying what I have selected after I press "Save". But it actually saved in the database. So, I kind of getting a little confuse and do more research why it is doing that. Finally I found out the problem is with the datatype. First form has two characters in the return value and this page has only one character. I used CHAR(2) as the datatype for that field and turned out it is appending space at the end since it has only one character. For that I do not see anything on the screen. I changed the datatype to VARCHAR2 and now the problem resolved. Thank you once again for your time.
    Soe

Maybe you are looking for

  • File error messages using DiskWarrior-- pList items

    The files shown below are corrupted according to a DiskWarrior file check. It was my understanding with earlier OS versions, that the solution was to discard a bad pList, and then the parent Application (or the system itself) would refresh it in the

  • Mac OS X doesn't boot with iPod plugged in

    Hi there, i have a little problem with my ipod shuffle. When start my iMac and my iPod is plugged in, then is doesn't start or extremley slow. As soon as i plug it out, it starts immeditely or continues. Is there something i can do? or is it just aga

  • Vendor Payment Limit

    now we r implementation in sap. Requirement is if any vendor at the time of payment 20,000 maxumum Value if above to  pay vendor system should not allowed. Ex: In f-53 inputs for document Date, Com Code, Bank ACCOUNT Amount value in Amount value up t

  • What does SOAP action do?

    Hi All, From hep.sap, i have got a very few knoweldge abt SOAP Action. i.e.,"Specify the SOAP action. The action species the value for the SOAPAction in Web service messages.". Can any one elaborate SOAP Action purpose, since we are calling Webservic

  • Table Design "alternating" only in readonly tables? (NW 7.10 SP7)

    Hello, I just found out, that style "alternating" is only applied to a table, when the table is set to read only. Should it be this way?? I see no reason for that behaviour. Bug or feature in Netweaver 7.10 SP7? Same behaviour is shown already in Dev