SBO client application issue

Hi All,
This intermittent error "internal error (min 1) occured [131 - 183] always happened almost in all user's PCs. It did not give impact to the document creation and other transaction but it is really disturbed users. The SBO version is 2007A SP01.
Pls advice. TIA
Andres

Hi Paul,
This error is intermittent and will not appears if the server name change to IP number. If I enter server name e.g. sboserver in the server name, the error is happened.
Could it be caused by virus attacked in the connectivity ? I know the sbo can works either in domain or workgroup. If something happend to the domain server, e.g. virus attack, I am afraid that the error could be one of the virus attacking impact although sbo server is different with domain server.
The question here is there is no sap notes explaining this error but the error appears in the SAP B1 GUI application.
This sounds strange for me because the server is different but the error message appears in B1.
Hope SAP considers it
Andres

Similar Messages

Workgroup client application issues during OSD/ No site assigned, unknown location

Testing SCCM 2012 operating system deployment with MDT 2013 integration.
I have a build and capture sequence setup and all is good apart from Application installs, they fail.
I've read through the other similar threads but nothing applied works in my scenario.
The same apps deploy to existing CM clients successfully.
Packages can be deployed successfully during the task sequence.
I've tried using the subnet the client uses as a boundary. I've tried an IP range, no luck.
I've added DNSSUFFIX SMSMP FSP in the setup windows and configmgr step
I've set the DP to allow anonymous access.
The MP dns srv record is present in DNS.
In the logs it always says the workgroup client is in an unknown location and therefore doesn't get a Site code.
The logs say that the MP info is missing even though I've tried /mp and SMSMP.
If I join the domain all is good. I don't want to join the domain during the build and capture sequence but if I have to then I will.
Any ideas would be very welcome.
Cheers

These are extract from the logs:
from clientlocation.log
<![LOG[[CCMHTTP] ERROR: URL=http://HNL-SCCM02.HNL.LOCAL, Port=80, Options=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG
<![LOG[Error sending HEAD request. HTTP code 401, status 'Unauthorized']LOG]
<![LOG[Workgroup client is in Unknown location]LOG]
from locationservices.log
<![LOG[Error sending HEAD request. HTTP code 401, status 'Unauthorized']
<![LOG[Workgroup client is in Unknown location]LOG]!><time="13:52:35.114+420" date="12-05-2014" component="LocationServices"
<![LOG[[CCMHTTP] ERROR: URL=http://HNL-SCCM02.HNL.LOCAL, Port=80, Options=0, Code=0, Text=CCM_E_BAD_HTTP_STATUS_CODE]LOG]!>
From smsts:
<![LOG[MP server http://SCCM02.domain.local. Ports 80,443. CRL=false.]LOG]!><time="13:24:20.520+420" date="12-05-2014" component="TSManager" context="" type="1"
thread="2828" file="utils.cpp:5881">
<![LOG[Successfully completed the action (Use Toolkit Package) with the exit win32 code 0]LOG]!><time="13:24:48.645+420" date="12-05-2014" component="TSManager" context="" type="1" thread="2828"
file="instruction.cxx:830">
<![LOG[MP server http://SCCM02.domain.local. Ports 80,443. CRL=false.]LOG]!><time="13:24:48.645+420" date="12-05-2014" component="TSManager" context="" type="1"
thread="2828" file="utils.cpp:5881">
<![LOG[Install application action failed: 'Java 7 x64'. Error Code 0x87d00269]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="3" thread="4088"
file="installapplication.cpp:879">
<![LOG[Sending error status message]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="installapplication.cpp:883">
<![LOG[   Setting URL = http:/SCCM02.domain.local, Ports = 80,443, CRL = false]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context=""
type="0" thread="4088" file="utils.cpp:6143">
<![LOG[   Setting Server Certificates.]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="utils.cpp:6171">
<![LOG[   Setting Authenticator.]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="utils.cpp:6178">
<![LOG[Set authenticator in transport]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:7734">
<![LOG[   Setting Media Certificate.]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="utils.cpp:6195">
<![LOG[Sending StatusMessage]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="libsmsmessaging.cpp:4023">
<![LOG[Setting message signatures.]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:1295">
<![LOG[Setting the authenticator.]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:1325">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: HNL-SCCM02.hnl.local:80 CCM_POST /ccm_system/request]LOG]!><time="13:28:44.708+420" date="12-05-2014" component="InstallApplication" context="" type="1"
thread="4088" file="libsmsmessaging.cpp:8604">
<![LOG[Request was successful.]LOG]!><time="13:28:44.739+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="libsmsmessaging.cpp:8939">
<![LOG[Policy Evaluation failed, hr=0x87d00269]LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication" context="" type="3" thread="4088" file="installapplication.cpp:1259">
<![LOG[Setting TSEnv variable 'SMSTSAppPolicyEvaluationJobID__ScopeId_1BBC49FC-F46A-4773-8CEE-00AFF6383ECE/Application_a1a8c511-ded8-451c-b79d-b5ebb8d122eb'='']LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication"
context="" type="1" thread="4088" file="installapplication.cpp:66">
<![LOG[EvaluationJob complete]LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="installapplication.cpp:1278">
<![LOG[MP list missing in WMI, sending message to location service to retrieve MP list and retrying.]LOG]!><time="13:27:44.192+420" date="12-05-2014" component="InstallApplication" context="" type="2"
thread="4088" file="installapplication.cpp:1051">
<![LOG[m_hResult, HRESULT=87d00269 (e:\nts_sccm_release\sms\client\osdeployment\installapplication\installapplication.cpp,1065)]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context=""
type="0" thread="4088" file="installapplication.cpp:1065">
<![LOG[Step 2 out of 2 complete]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="0" thread="4088" file="daprogress.cpp:226">
<![LOG[Install application action failed: 'Java 7 x64'. Error Code 0x87d00269]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="3" thread="4088"
file="installapplication.cpp:879">
<![LOG[Sending error status message]LOG]!><time="13:28:44.645+420" date="12-05-2014" component="InstallApplication" context="" type="1" thread="4088" file="installapplication.cpp:883">
<![LOG[   Setting URL = http://SCCM02.domain.local, Ports = 80,443, CRL = false]LOG]!><time="13:28:44.661+420" date="12-05-2014" component="InstallApplication" context=""
type="0" thread="4088" file="utils.cpp:6143">

How can I start a client Application from a procedure?

Hello, can someone help me to solve this problem?
I've written a client Application.(just one file Client.java) Then I created a .jar file for my applicaiton component and loaded it to the server using loadjava. (MyExample.jar)
It should be invoked by a procedure, which I've created.
create or replace procedure TEST as language java name 'MyExample.main(java.lang.String[])';
But when I want to start it in the SQl*Plus using "call TEST();", I received the message:
Executing PL/SQL: CALL COSMOS."JDEV_TMP_PROC_1"()
ORA-29541: Klasse COSMOS.CompUpdateClient konnte nicht aufgelöst werden
ORA-06512: in "COSMOS.TEST", Zeile 0
ORA-06512: in "COSMOS.JDEV_TMP_PROC_1", Zeile 3
ORA-06512: in Zeile 1
Process exited.
Can someone tell me why and how I can solve it?
Thanks
Lucia

As Andrew suggested, it might be an issue with broken java installation on your system.
You could try performing following steps to see if you get similar results. This will verify if there is something with your java installation or something to with the way you coded your java class(es).
(since you did not post the code, I'm not sure which one might be a problem.
SQL> create or replace and compile java source named "Hello" as
2 import java.lang.* ;
3 import java.util.* ;
4
5 public class Hello
6 {
7    public static void Say()
8    {
9     System.out.println("Hello World in Java!") ;
10    }
11 }
12 /
Java created.
SQL>
SQL> create or replace procedure Hello_Java is
2 language java
3 name 'Hello.Say()' ;
4 /
Procedure created.
SQL> show errors
No errors.
SQL>
SQL> set serveroutput on size 100000
SQL> exec dbms_java.set_output(100000) ;
PL/SQL procedure successfully completed.
SQL> exec Hello_Java ;
Hello World in Java!
PL/SQL procedure successfully completed.
SQL>

High CPU Usage On client application when upgrade remote SQL database

Hi,
Is anyone here encountered very high CPU usage after upgraded the database from SQL 2005 to SQL 2012? Following describes my issue.
I have my client application running on Windows 7 that access to central database (SQL 2005) on Windows server 2003 using ODBC connection, this client application basically query data and perform data insert and update. There are a number of this similar
clients connected to the database.
Due to slowness of the database server, company decided to upgrade the database server to SQL 2012 and also new hardware runing Windows Server 2012. There is no change on the client application and client hardware and the client application still using the
same ODBC connection to query, insert or update the new database server.
The problem I am now experiencing now is that my client PC where my client application running the CPU usage is very high almost hitting 100% when accessing to the central database. I am also noticed this program lsass.exe that utilized almost 40-50% of
the CPU time when client application accessing the central database.
Is anyone here know, why client PC CPU usage 100% when access to upgraded SQL 2012 database? What is lsass.exe program doing, it only appear when accessing to database server. How to reduce the CPU usage on client?
Thanks.
Chee Wee.

Hello,
After upgrading, please rebuild indexes and update statistics on the databases.
http://www.mssqltips.com/sqlservertip/1367/sql-server-script-to-rebuild-all-indexes-for-all-tables-and-all-databases/
http://www.mssqltips.com/sqlservertip/1606/execute-update-statistics-for-all-sql-server-databases/
Configure maxdop on the instance.
http://blogs.msdn.com/b/sqlsakthi/archive/2012/05/24/wow-we-have-maxdop-calculator-for-sql-server-it-makes-my-job-easier.aspx
If the above does not solve the issue, let us know.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Search Server 2010 Express: Open a PDF document from list of search results invokes adobe reader client application with error

Hi community,
I set up search server 2010 express on a windows 2008 r2 server.
The Adobe PDF iFilter 9 64 bit is installed and search is correctly configured to find PDF-files.
When doing a search and clicking on a link of the result page, the PDF is not opened in the browser, instead the adobe reader XI client application (11.0.04) is invoked and an error raised like "could not open document .. check syntax of url..."
Right click on a link to open in new tab works fine. And PDF-Files from other arbitrary Internet Sites opens in browser correctly. Moreover when configure Adobe Acrobat Pro 9 as default application on the client it also open in Browser correctly.
I noticed googling the web there are several challenges when dealing with PDF-files in sharepoint. The following settings are made so far:
1. In IE: Add-On to open PDF in Browser is enabled for all sites.
2. Client Integration is enabled
3. The OpenControl attribute in the DOCICON.xml is left empty OpenControl="" for the pdf entry.
4. The Browser File Handling is set to "Permissive".
Please feel free to ask for more information if needed.
I appreciate any help on this. I don't know what to do further.
Thanks in advance.

Thanks for the reply.
Before responding to your points I want to give a little more context:
We have an intranet based on pure html and a little aspx containing many of those pdf- files. By clicking on the links in the intranet the files open correctly in browser handled by the adobe plugin. Now we set up this search server crawling the file system
accessed through a share to the root folder of the intranet. In the search server settings a host mapping rule is applied to replace the file://[share] with http://[intranet host+domain+port] to access files over http.
And now to answer your question. The resulting urls are the same, copying the link from intranet and copying the link from the search result (except some case issues).
The event viewer not seem to show any errors on this, though I'm not very familiar using it.
If any further information are from interest and any ideas come to your mind - please let me know.
Thanks.

SBS Client Application Launcher has encountered a problem and needs to close

I logged in to a remote session on the SBS to add a user to a security group. Now, when I log on to my computer with the domain administrator account, I get the error "SBS Client
Application Launcher has encountered a problem and needs to
close." There is an event in the Application log associated with the error:
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date:  8/29/2011
Time:  2:27:46 PM
User:  N/A
Computer: CONTROLLERASST
Description:
Faulting application applnch.exe, version 5.2.2893.2, faulting module applnch.exe, version 5.2.2893.2, fault address 0x0002442a.
For more information, see Help and Support Center at
http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74   Applicat
0008: 69 6f 6e 20 46 61 69 6c   ion Fail
0010: 75 72 65 20 20 61 70 70   ure app
0018: 6c 6e 63 68 2e 65 78 65   lnch.exe
0020: 20 35 2e 32 2e 32 38 39    5.2.289
0028: 33 2e 32 20 69 6e 20 61   3.2 in a
0030: 70 70 6c 6e 63 68 2e 65   pplnch.e
0038: 78 65 20 35 2e 32 2e 32   xe 5.2.2
0040: 38 39 33 2e 32 20 61 74   893.2 at
0048: 20 6f 66 66 73 65 74 20    offset
0050: 30 30 30 32 34 34 32 61   0002442a
0058: 0d 0a                     ..
After clicking to send/not send an error report, I get back to the desktop where all appears normal. However, I can no longer access the internet while logged in under this account.
I can log in on another PC with the domain admin account with no error.
Any help would be appreciated.

Hi,
I would like to suggest you run System File Checker with command: sfc /scannow to scan and repair the system files.
If it does not work, please also test the issue in Clean Boot.
Clean Boot
================
Let’s disable all startup items and third party services when booting. This method will help us determine if this issue is caused by a loading
program or service. Please perform the following steps:
1. Click the Start Button type "msconfig" (without quotation marks) in the Start Search box, and then press Enter.
Note: If prompted, please click Continue on the User Account Control (UAC) window.
2. Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click the "Startup" tab, click "Disable All" and click "OK".
Then, restart the computer. When the "System Configuration Utility" window appears, please check the "Don't show this message or launch the System
Configuration Utility when Windows starts" box and click OK.
What’s the result in Clean Boot?
For more information regarding Event ID 1000, please refer to the following link:
http://www.microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows%20Operating%20System&ProdVer=5.2&EvtID=1000&EvtSrc=Application%20Error&LCID=1033
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Trouble opening documents in client application. Credentials not being passed through.

I have 2 different farms with the same problem which recently popped up. All files either open as read only (Office Documents) or users get an access denied error (PDF Files). Users are able to download the file, make changes and then upload it
again. It seems like there is a problem passing credentials to Office and Adobe.
The "Open With Explorer" option no longer works either which leads me to believe it is a problem with WebDAV.
2 different environments experiencing the problem:
Server 2012, SharePoint 2013 Server
Server 2008 R2, SharePoint 2010 Foundation.
Both are using windows authentication and Kerberos. The two farms are on different networks leading me to believe it is a browser or client issue. However, there is an additional 2013 foundation farm that is functioning correctly. I have compared local security
policies, IIS settings, SharePoint web application settings and cannot find anything different between the functioning farm and the ones that are having the problem.
The URL's are already in trusted sites.
Databases are not in read only mode.
WebClient Service is running on the client.
I feel like I can rule out most of the client side issues because I have one farm that is working. I have also tried accessing the site from outside the network with my personal computer and it does not work there either. I am running out of ideas to try
and fix this. Any ideas would be appreciated.
Thank You!

Hi ,
For this issue, I'm trying to involve someone familiar with this topic to further look at it.
Thanks,
Eric
Eric Tao
TechNet Community Support

URGENT : Problem in DataSource usage in Client applIcation

URGENT : Problem in DataSource usage in Client applIcation
Hi ALL
I have deployed a EJB(Session Bean) in Oracle-OC4J Container.I am using datasources, in my bean as well as in my client
application.Here Client is deployed along with bean in container.
I am using "ejb-location"JNDI Name inside Client to get connection.
(Which is mentioned in datasource element of datasources.xml)
For this i have configured datasources.xml also.
If i use "oracle.jdbc.pool.OracleDataSource" in datasources.xml then ClassNotFoundException is coming.
But i have included classes12.jar in home/lib directory
But if i use "com.evermind.sql.ConnectionDataSource" then i am getting connection.But if i do some operations(Even
setAutoCommit(false))its giving NULL PointerException.
Why this is happening?
Thanx in advance
Venky

Hi Venkastesh,
There are two issues. If your entry is like this....
location="microDS"
xa-location="jdbc/xa/MicroXADS"
ejb-location="MicroPool"
...then use ejb-location for database calls through ejb and location when you try to get through normal java client.
This will help you.
regards,
Vijay
null

Encoding Error when invoking form from client application.

I have an issue in retrieving the form data from the client application. Form (XDP File) is displayed in the browser as PDF through
ServletOutputStream then i am trying to retrieve the data on click of the submit button. At that time the following exception is thrown:
[8/17/07 9:20:18:212 EDT] 00000029 jsf E com.sun.faces.application.ViewHandlerImpl setRequestEncoding SRVE0254E: Failed to set request character encoding: ["utf-16"].
java.io.UnsupportedEncodingException: SRVE0254E: Failed to set request character encoding: ["utf-16"].
at com.ibm.ws.webcontainer.srt.SRTServletRequest.setCharacterEncoding(SRTServletRequest.java :231)
at javax.servlet.ServletRequestWrapper.setCharacterEncoding(ServletRequestWrapper.java:158)
at com.sun.faces.application.ViewHandlerImpl.setRequestEncoding(ViewHandlerImpl.java:364)
at com.sun.faces.application.ViewHandlerImpl.restoreView(ViewHandlerImpl.java:267)
at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:158)
at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:239)
at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:91)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:478)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:463)
at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3129)
at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:238)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:811)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1433)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:93)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink .java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink .java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.jav a:102)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionLi stener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:194)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:741)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:863)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1510)
Note: I am able to retrieve the data, if I store the same PDF file in the local disk and invoke it from my JSP Faces file.
i appreciate if any one can help me to resolve this issue.

Please update me if any one have idea on this issue.

Set Open Documents in Client Applications by Default with SharePoint 2007

I have activated the excel service with sharepoint 2007, but some excel files can't be opened well for unsupported features.
Therefore, I have to set to open excel file by client application avoiding the above error.
I have done bellow settings but no effect:
1)Change the advanced settings in document library to
Open in the client application;
2)Set authentication providers to Enable client intergration;
3)I 'd like to activate the feature of
open documents in the client application but I can't find it in features.
Please kindly guide me how to make it.
Many appreciations for your support in advance!

Hi,
Please try the solutions that provided in below threads:
https://social.technet.microsoft.com/Forums/office/en-US/919e102c-923b-4eee-b89c-631c0d557709/how-to-mandate-excel-2007-document-xlsx-to-open-in-excel-2007-client-instead-of-excel-web-acess-in?forum=onlineservicessharepoint
https://social.technet.microsoft.com/Forums/sharepoint/en-US/89030108-7185-40e1-b898-e5994484b6d3/sharepoint-2007-how-to-open-an-excel-document-on-client-if-excel-services-are-installed?forum=sharepointgenerallegacy
Then, this issue is not controlled by Office client, we need to config it with SharePoint. Thus, if you have further question, I recommend you post it SharePoint forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=sharepointgenerallegacy
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Open SharePoint 2013 Search Results (EML files) In The Client Application

Hi, I have a problem about using sharepoint 2013 search for EML files:
When i click on the search result link *.eml, the browser open for the email file, i can only view the content of the EML file, but actually i want to see the full info of it like using an email client application outlook express including From:,To:,Date:,Subject:,ect.
How can i click on the search result link to open an email client application to view the result?
Thanks a lot.

Hi ,
According to your description, my understanding is that you want to open SharePoint 2013 Search Results (EML files) in the Client Application.
For your issue, you can follow the steps as the blog’s:
http://www.quercussolutions.com/blog/index.php/opening-eml-file-types-in-outlook-from-sharepoint-2010/
Best Regards,
Eric
Eric Tao
TechNet Community Support

Not able to Check-out/Check-in .pdf file from Client application in SharePoint 2013

Hi,
When I click on .pdf document in document library its getting opened in browser not client application.
I have done all the below settings.
1. Set Opening Documents in the Browser as Open in Client Application.
2. Activated Open Documents in Client Application by Default.
Still .pdf files getting opened in browser.
Then I Tried by doing the below Internet Setting.
In Internet Explorer -> Manage add-ons and disabled Adobe PDF Reader -> Disable (So that the pdf should open in Browser).
Now I am able to Open the document in Client application but its not connected to SharePoint (
I am not able to do Check-in/Check-out/Save file back to SharePoint).
Can Any one Help me with this issue.
Also note Build number and CU :
15.0.4675.1000 - December 2014
Thanks in advance.
pavan2920

the option to open a PDF in the browser is based on the Web Application's list of allowed MIME types... it cannot be controlled on a per-library basis.
see: http://social.technet.microsoft.com/wiki/contents/articles/8073.sharepoint-browser-file-handling-deep-dive.aspx
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Best/Easiest Practice for Distribution of Webhelp files for Fat(ish) Client Application

So another in my long line of questions in trying to change the implementation of the help systems at my new employer.
So, the pressure is to convince the existing guard to toss out the old method and go with a new method... One of the issues has come up for CSH Webhelp (via RH10)...
Apparently, in the old method (where every help topic was it's own CHM - no, I'm not kidding). They kept it that way so that any time a help file was updated, they could just send out that one chm to update that one topic.
Now they are worried that if we switch to webhelp using topics in one single big project that we can't just send out a single updated file any more...
So I'm trying to get ammunition as to how updates to the help can be distributed without it being a big hassle...
We do have small updates that go out about every week, and they are afraid that going to the webhelp (1 project with lots of topics) method will require more time and effort for the techs because they will have to complete the update of a huge help system every time.
One solution we have suggested is that we only update help files on major releases and add any changes to help procedures in the Release Notes or in a separate PDF and also include a note that the help files "will be updated to reflect this change in the XX/2015 XYZ Release).
Does ANYONE have any other ideas of how distribution could be done efficiently so that we don't have to continue this "project per topic" fiasco?
HELP!!! PLEASE!!!!

Amebr - you hit the nail on the head... i want to apologize to everyone for all this mass hysteria...but this has been a freaking rollercoaster... one day they are happy with the plan, the next day they decided they want to complicate it more... So now my job is to find out how viable and how tricky and perhaps how dangerous it will be to send out JUST the files that have been changed. Especially for CSH!
Anyone have any experience with this or have any advice? Peter? I suspect you might know how this might work... are they any pitfalls to watch out for.. I just have this fear of sending out a few files from an entire project... Altho, it appears when I publish, ONLY the files that have been edited in some way show a new date.. that includes non-topic files - so i'm assuming sending all those will keep the TOC, Index, and Search features working properly... as well as incoming and outgoing links from an edited topic?
Another question would be how to handle new images in a project... as the image folder tends to be the largest, i don't want to have to send the entire image folder... Thoughts...???? Advice? Jeff? Peter? Amebr? Bueller? Bueller? Bueller....?
THANKS!Best/Easiest Practice for Distribution of Webhelp files for Fat(ish) Client Application
OH... and Jeff... my apologies for the misnomer of using the term "Fat-ish" client in reference to this... I totally misspoke and should have said Mobile App... but in my mind, any time you have to download something to use it, it's a fat client... sorry! :-/

How to debug a Mobile client application

Hi,
How to debug a mobile client application on the laptop, where we dont have any .NET 2003 application installed. (not an MDW)
If we get any error on the application, which could be a UI error on laptop, and if everything is working fine on the MDW, is there any way to debug the application on Mobile client?
Also, please provide me links or tips on how to debug the mobile application, on MDW as well.
Regards,
Praveen.

Hi,
to be able to debug on a local machine you would need at least to install the UI/BOL class files and the project files and make some local settings.
But anyway on all clients there should be the same MSA installation like it is on the MDW so in case of an issue it is normally caused by local (inconsistent) data.
I would suggest to access the laptop IDES database by changing your MDW odbc settings and perform the debug session on the MDW.
Debugging in VB .net is similar to VB6 but you have to notice that changing of the code is NOT possible when being in debug mode.
Regards,
Wolfhard

Connection to SQL Azure client application

Dear all,
I have setup an SQL azure database that will be accessible from a Desktop client application.
So that when I need to connect to the database, I need to go to the Admin portal and then allows my current PC IP to the firewall rules tables acess. When this is done my client application is allowed to access the database.
I am actually accessing the database from a local WCF services hosted as an NT service which have the connection string to the SQL azure database.
By testing different scenario I have found weird issue and hope you can help on the best way to approach it :
Question 1 : Client application PC IP adress
When I distribute my application to a customer which try to run it, it cannot access to the azure database simply because its client IP address PC is not in the list of the firewall on my azure account. As I do not know in advance the IP address of my customer,
what is the way to allows the connection automatically ?
I understand that it can be a security feature in a way to authorize a user or not to the data.
Question 2 : Connection string password
Actually the connection string to my SQL azure database is visible in the config file of my Nt service host for my WCF endpoint. The problem is that the password is in clear text here and I would like to avoid that. To solve that issue I guess I have
2 posiibilities :
- Encrypt the connection string password from my config file, but then how Azure will be able to understand it fro decrypting ?
- Host my WCF service under azure ? if yes how ? will it be better it terms of performance as well ?
Thnaks for your feedback and help
regards

Hello,
1. SQL Database use
server-level firewall to prevents all access to SQL Database server until the client computers have permission.The firewall grants access based on the originating IP address of each request.
So, you should configure the firewall rule by adding the IP address of the client PC before connect to the SQL Database.
2. Windows Azure provides a secure
certificate store where you can maintain your certificates. After encrypt sensitive data in your configuration files, you can deploy certificate with a key pair to Windows Azure and it can be used for encryption/decryption.
Reference:
Wiki: Windows Azure SQL Database Connection Security
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

SBO client application issue

Similar Messages

Maybe you are looking for