SBO E-mail through Alert is short of content

I use Alert function to send E-mail to receipt with query results. The
SBO mailer seems to work properly. But the received E-mail is short of
contents. When the E-mail has more than one hundred lines of query
result, the E-mail has only about 70 lines of data from the front of
query result, while the other remaining data was missing. It seems
There is blank space left for the missing data in the received E-mail.

Check this SAP Note which explains "SBO Mailer creates unnecessary spaces in message body when lines in the message body contain more then 74 characters."
SAP Note:905064 SBO Mailer creates unnecessary spaces in message body
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=905064]

Similar Messages

How to trigger a mail through ALERT CONFIGURATION??

Hi Folks,
I want to know how to trigger a mail through Alert Configuration?
I've read Help.SAP.com, but i am not clear where exactly the sender Email address to be given for sending a mail??
Pls reply..
Thanks in advance..
cheers
ram.

Hi,
You need to maintain the email address in SU01 for the particular user Id. Also you need to configure transaction SCOT for this.
Regards,
Jai Shankar

Sending hyper links in mails through alerts and maintain correlation

Hi,
I have a requirement as follows:
It is a JDBC to R/3 interface. In R/3 we have to call a chain of Bapi's one after the other subject to the successful execution of the previous bapi.
Ex: Create material----> Create classification if the material is successfully created.
when the material creation fails, users should receive a mail with a hyperlink. The user will then correct the error and click the hyperlink. This should cause the process to continue and try to create the material one more time.
Can this be achieved using BPM? Should we use Alerts ? If yes how can we correlate a Mail with Process ?
I will be great help for me if anybody has the answers.
Best Regards,
Vijay Vangala

Yes, it is possible. This may not be the best way, but it should work. However, you will have to have a webservice to send a message to XI, which means external development. (Will have to check to see if the HTTP adapter can retrieve URL parameters. If so, then webservice won't be needed.)
In order to maintain correlation, a unique correlation id has to exist in the payloads of the message (or in the URL if HTTP adapter can be used.)
An alert will have to send from BPM. The content of the alert can be done via a mapping program, which will generate the URL in the text of the alert. The URL will contain the correlation id.
The URL is to execute the webservice, which will retrieve the correlation id from the URL and send a message to BPM. If the HTTP adapter can retrieve parameters from the URL, then the URL can be send back to XI directly, with the appropriate interface name, namespace, etc. (the documentation for constructing the URL for HTTP adapter can be found in help.sap.com)
Regards,
Bill

How to send mails through Alerts.

Hi All,
I have an requirement to send email to different user periodically after checking some condition in HRMS application.Initially I was trying with the help of JAVA Api.Now while R & D I found that I can do it by using Oracle Alerts.but I dont know How to do this.
Please Help.
Regards,
SHD

What is the application release?
Please see "Oracle Alert" manual.
Oracle Alert User's Guide
http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115alrug.pdf
Oracle Alert User's Guide
http://download.oracle.com/docs/cd/B53825_03/current/acrobat/121alrug.pdf
Note: Please post similar questions in the appropriate forum.
EBS General Discussion
General EBS Discussion
Thanks,
Hussein

Dynamic mail message's through Alert

Hi All,
We have a requirement to send dynamic mail messages based on the alert output's.
like if the output value is NULL then i need to send different message and if it is not null then another message has to go to the user.
is this possible through alert??
Thanks in advance,
Jana

Hi jana;
AFAIK yes its possible, please check below links and notes:
plz help me...!!!! Workflow Notification Mailer
Re: EBS work flow
Also check:
Control - Workflow: Setup Doc ID: 113664.1
Oracle Workflow Best Practices Release 12 and Release 11i [ID 453137.1]
Oracle Workflow Release 12 Diagnostics Doc ID: 469822.1
Regard
Helios

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your help

I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field.

Uncaught Exception occured while sending mail through abap code.

Hi,
Uncaught Exception occured while sending mail through abap code.Run time Errors "UNCAUGHT_EXCEPTION" occured after excuting the call method CALL METHOD SEND_REQUEST->SEND( ).kindly help in resolving the issue.

HI,
Runtime Error: UNCAUGHT_EXCEPTION details.
Runtime Errors         UNCAUGHT_EXCEPTION
Exception              CX_ADDRESS_BCS
Short text
     An exception occurred that was not caught.
What happened?
     The exception 'CX_ADDRESS_BCS' was raised, but it was not caught anywhere along
     the call hierarchy.
     Since exceptions represent error situations and this error was not
     adequately responded to, the running ABAP program 'SAPLZSEND_MAIL' has to be
     terminated.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_ADDRESS_BCS', was not caught in
    procedure "SEND_MAIL" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An exception occurred
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "UNCAUGHT_EXCEPTION" "CX_ADDRESS_BCS"
    "SAPLZSEND_MAIL" or "LZSEND_MAILU01"
    "ZSEND_EMAIL"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SEND_MAIL" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
Please help me to resolve this issue.

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

How to get my mail through without opening the mail app...

Hi
I have a tendancy to when ive finished using with my apps on my Mac I always go to top left and press quit itunes or quit mail etc
if i do that to mail, obviously when a email comes through i dont get it straight through unless the mail program is open (like on my iphone, if an email comes it just comes straight through)
what im asking is, is there a way for me to get my mail through straight away whilst the mail program is open? - thing is I like things tidy and dont like all these programs left open
also what is the point of the red X in the top left corner?, if im on a website on safari and I press the X, safari is still open isnt it, but if i click back onto safari to re open the app it just goes to the homepage
so really what is pressing the red X on the top left and quitting the app altogether, what is the difference?

Mail has to be open to receive the new mail notification.
Clicking the red x button just closes the window, does not quit the application.
To quit the application, you have to select "Quit......" from the application menu.
When an application is open, a white light indicator will be shown under the application icon in the Dock.

I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

Is there anyone out there who cannot get into their e-mail through your internet providers address on your i-pad? I keep getting a 100 error code

Is there anyone out there who have come across a 100 error code by trying to log into their e-mail through their internet provider? The error code means that you are trying to log in from another country. Is there something wrong with the settings???Please let me know if there is an answer out there. thank you
Michele

As you can see below, when I right click, I have no such option. In the User Account Settings, I'm operating as the "System Administrator".
Any other suggestions?

How to Configure Windows NT Mail on Alert Manager - System - Option

Hi
This is Regarding Oracle Financial Application.
In 11i, Alert Manager, there is an option to configure Windows NT Mail to Send and Recieve Mails (Oracle Alerts-Message).
Anybody knows, what is the configuration?
Our Company Mail Server is Window NT.
But, Our Oracle Application Server is Solaris Machine.
We want to configure the Mail settings .. while sending Oracle Alert from Oracle application, it should reach our NT Mail server.
In Unix settings Alert is working fine.
But, How to do the Windows NT Mail settings on this Application ?
Please reply on the following mail id : [email protected]
It's very urgent.
Thanks,
Sheeja.

Hi
This is Regarding Oracle Financial Application.
In 11i, Alert Manager, there is an option to configure Windows NT Mail to Send and Recieve Mails (Oracle Alerts-Message).
Anybody knows, what is the configuration?
Our Company Mail Server is Window NT.
But, Our Oracle Application Server is Solaris Machine.
We want to configure the Mail settings .. while sending Oracle Alert from Oracle application, it should reach our NT Mail server.
In Unix settings Alert is working fine.
But, How to do the Windows NT Mail settings on this Application ?
Please reply on the following mail id : [email protected]
It's very urgent.
Thanks,
Sheeja.

Problem in sending mail through dynamics actions

Hi Friends,
I have a problem in sending mail through dynamics actions . In this we pass a subroutine in dynamics actions which send an mail when promotion action occured.
Problem is that sometimes it will send an mail or sometimes not. I have no idea to solve this problem.
Can anyone suggest me .
Thanks ,
Anish
Moderator message : Duplicate post locked.
Edited by: Vinod Kumar on Sep 5, 2011 9:45 AM

Hi,
Check that all the bindings have been done in proper way as it is configured.. Try to do the binding manualy..This could also be the problem..
thank You

How to send a mail through web dynpro application

Hi
How to send a mail through web dynpro application?
Thanks

Hi ,
Please post some more details about your query .
One way is to can use LinkToUrl UI element and in the reference property of the UI element , give it as mailto:mail addess
Thanks.
aditya.

TS3276 I get Apple Mail through having activated POP in gmail. Since a week, when I click on "Get Mail", after a delay I see brielfly flashing "Incoming message 70 etc." but it dissapears and no mails gets downloaded. How to proceed?

I get Apple Mail through having activated POP in gmail. Since a week, when I click on "Get Mail", after a delay I see brielfly flashing "Incoming message 70 or whathever the number in waiting is." and the green band extends to the end of the line in a fraction of a seconde, but then dissapears and no mails gets downloaded. It is not a matter of password etc.. that are all OK. Strangely, yesterdays, some email did come through after a few days of failure, but not anymore. Could it be related to hacking or something like that? Any thing I could try?
I have OX 10.6.8.
Many thanks for your kind suggestions

Maybe these will help:
https://discussions.apple.com/message/17677533#17677533
https://discussions.apple.com/message/18324129#18324129
https://discussions.apple.com/message/18203126#18203126

SBO E-mail through Alert is short of content

Similar Messages

Maybe you are looking for