Sbo HowTos at a glance

Hi all,
the number of SAP Business One HowTos is growing.
If you need a hint, you might consider checking here:
http://www.itwiki.net/ow.asp?SboHowTo
Itwiki is a non-commercial wiki made from developers for developers.
Ibai has just added another HowTo.
Lutz Morrien

Just wondering...
Is anyone interested in these postings?
I am just trying to pass on information with them, but if they are just annoying, I will stop posting them.
Lutz Morrien

Similar Messages

SBO-Common

Hi, I had to re-install MS SQL 2005 and SAPB1 2005 A and server tools from the beginning. I have now just attached my company database and at first glance it seems to work ok. I am wondering, do I need to restore the old SBO-Common database, overwriting the new one created in the re-install? Is that important/necessary? Thanks, Tom

Hi Tom..........
If you re installed SAP and newly generated SBO Common tehn you no need to replace old SBO common.
But if you have been working with any of the addons then i guess you shoud replace it with Old SBO Common DB else you have to configure your addon in newly generated SBO Common DB.........
Regards,
Rahul

Upgrading SBO 2005A SP 01 PL 29 to SBO 2007A PL 00

Dear All,
I've heard that SBO 2005A SP 01 PL 29 could be upgraded to latest PL of SBO 2007A after upgraded into PL 00 of SBO 2007A. This info is hopefully useful.
Rgds,

Hi Jimmy and William,
I think there's a slight, but important misunderstanding - and I suspect that William may not have revisited this discussion:
Error importing oBusinessPartners with DTW 2005.0.16
...but that's no severe enough to get so upset, Jimmy, or?
Just to recap that:
SAP Business One 2005A SP01 PL22 is the last patch that you can apply before upgrading to SAP Business One 2007A if you want to participate in Ramp-Up for B1 2007!
...and currently you can only use B1 2007 - and get support from SAP when your customer IS accepted for the Ramp-Up!
Only after SAP Business One 2007A will go into "general availablility" this would change!
The upgrade paths for B1 2007 are as you described:
- Upgrade from any patch of an older release to a newer version using the specific Upgrade package is possible - and supported.
The "Upgrader" package is actually a patch that has been validated / released to be used for any upgrades from older versions.
- Direct Upgrades to later patches of the newer version (skipping the Upgrader) may technically work at first glance, but you can't be sure that no issues may occurr later - and in the end cost more time than you gained by overstepping one step in the upgrade process - and it may get you in "trouble" with SAP Support.
I am sorry, but I didn't phrase that correctly when I entered that comment!
But again, unless you are getting this customer into Ramp-Up for 2007 it is irrelevant for you anyway what patch from 2005A SP01 you are using now...
BTW: I have checked the statement on SAP Service Marketplace - and maybe this can be clarified even better too.
Thanks for raising this question!
Regards,
Frank
Message was edited by:
Frank Moebius

Year-at-a-glance View in iCal

Once again, I am filling out next year's year-at-a-glance wall calendar and wish I had this view in iCal. With today's screens, a year-at-a-glance view shouldn't be difficult to implement and would be very useful. My favorite layout has 12 rows (one for each month, January at the top) and blocks for each day running from left to right with weekends shaded. When is Apple going to improve iCal? or at least enable others to make such improvements?
Message was edited by: Jim Putnam

I can't believe this, I finally get round to organizing myself and ical doesn't do a year view.
I have hunted online for some way to make this happen and have ended up making a pdf of a printout to be able to see it.
This can only be a temp solution, as my diary changes a lot and printing/pdf is not very elegant or efficient or even that easy to read quickly.
In my online search I have found posts requesting this as far back as 2003, and 6 years is to long to wait for something that surely must be such a simple solution.
I'm also stunned by the lack of plugin/widget/app solutions from 3rd party developers, I would definitely pay a a buck or 2 for something to let me do this well within ical,
And If I want it you can be sure there are at least another 100,000 who would also pay, maybe we could get the guy who wrote the ifart app for iphone to write it for us, about 2000 people a day were buying that at 99 cents a pop in the run up to christmas.
Apple should embarrassed by this.
If anyone knows the solution please post it.
Brin

How can I see Calendar event END times at a glance?

How can I display my Calendar event titles exactly as I type them? I do not want Calendar to remove duration from the titles of my events. Otherwise I can't see event END times at a glance in month view; only start times. How can I "trick" Calendar to just show my titles as I type them - as I always could before I upgraded. I used to be able to enter "Seminar 9am-5:45" and it would appear that way regardless of how or what I chose to enter (or not enter) for duration.
I am running OSX 10.9.3.

It's a bit weird, but if you type in the time info TWICE into the event title then Calendar uses/deletes one of them to populate the event details and leaves the other.
Apple - Mac OS X - Feedback

Tell if CS5 or CS5.5 at a glance?

Is there a way to know if an After Effects Project File is CS5 or CS5.5 at a glance? I mean by just clicking on the info or something? (Running a Mac). I have 5.5 and I down save them to 5 to send them to people and I was wondering if there was a faster way to tell than just opening every single file and checking it in AE. Thanks!

If you open an AEP file in a text editor like BBEdit you can actually
see which version of AE created it by looking in the meta data at the
end of the file:
<xmp:CreatorTool>Adobe After Effects CS5.5 10.5 Macintosh 64</xmp:CreatorTool>
I can't find anything in the file that shows which version of file it
was saved as, though...
Opening a binary file like this in a text editor always comes with a
risk of you accidentally changing something that will make your file
corrupt, so be careful.

Atlantic OTC - Schedule at a Glance

Atlantic OTC, April 25, 26
Washington Convention Center
Early registration discounts for the Atlantic Oracle Training Conference expire on Monday, April 15. By registering early, attendees pay just $300, which is a $100 savings off the Late/walk-in registration fee of $400.
This event is a packed, 2-day agenda with over 80 sessions presented by 40 top industry speakers. Lunch, refreshments and welcome reception included in the registration fee.
Here are a few useful links to the conference:
Schedule at a glance:
Thursday, April 25: http://aotc-maop.org/abstract/thursday.html
Friday, April 26: http://aotc-maop.org/abstract/friday.html
Secure Online Conference Registration: https://www.aotc-maop.org/ssl/register_a.asp
General Conference Information: http://www.aotc-maop.org/
For those Oracle Professionals on the Eastern USA hampered by travel restrictions and reduced training budgets, this conference is an excellent opportunity to receive high-quality technical training at a low cost.
Best wishes,
Cam White
AOTC Conference Planning Commitee

You can send feedback and let Apple know
http://www.apple.com/feedback/

Possible to see at a glance who has/has not viewed pdf via the 'Tracker'?

We are working on setting up procedures for Browser-based reviews. We were hoping we'd be able to see at-a-glance who had/had not viewed or sent back comments, and the date they sent them in the Tracker, but it seems to be just a list of who it was sent to originally. How do you know who has sent comments, other than manually scrolling through all the comments to see people's names?

Hi;
No, there isn't a way for you to see anything about who has saved progress.
Thanks,
Josh

See alarm status at a glance?

In iCal 3.0.2 I want to see at a glance if an event has an alarm set. On my Treo there is an alarm icon. Is there anything similar for iCal?
Thanks!

Apple.com/feedback

IMC Performance at a Glance

Hi,
Does anyone know if it is possible to edit the default "Performance at a Glance" view such that it displays a trend line for for interface statistics (really only want bit/s in and out) instead of a data grid?
I can't seem to see an obvious (or non-obvious) way from the doco or from within IMC itself.
A trend line would be more helpful for me. It would be nice to be able to create custom PaaG views that could then be applied to multiple devices as a template.
-Felipe Avelar-
Copy By "MartiBarber"

Anna,
    Thanks so much for the reply. That helps a lot.
    I am still wondering about one thing, though. According to the documentation, the "A" prefix in a Modbus DSC address means that it will return an array of data, whereas something like the F prefix is for a single precision float. When I create a channel, I pick the F300001 option, and the address that is returned is a range: F300001 - F365534. The range would imply that a series of values will be returned, e.g. an array. I always just delete the range and enter a single address. Is that the intention? Does it return the range just so you know the range of allowed addresses?
   OK, I'm actually wondering two things. Is there a reason why the DSC addresses start with 1, e.g. F300001, instead of 0, like F300000? For the old Modbus API from LV7, one of the devices we have that uses that API has a register at 0. How would that be handled in DSC?
Thanks,
    Dave
David Thomson Original Code Consulting
www.originalcode.com
National Instruments Alliance Program Member
Certified LabVIEW Architect
There are 10 kinds of people: those who understand binary, and those who don't.

How can I at-a-glance review a server's SHA-256 fingerprint in Thunderbird?

All my IMAP sessions are created via SSL/TLS tunnels to the respective servers.
Thunderbird dutifully highlights that the connection is encrypted with the small grey padlock icon in the folder pane. This is helpful.
However, I would like to check the SHA-256 finderprint of the server's certificate on a regular basis, at a glance. Is there a way I can easily do this in Thunderbird?

Hi ITBobbyP,
If I understand correctly, you want to load data from multiple sheets in an .xlsx file into a SQL Server table.
If in this scenario, please refer to the following tips:
The Foreach Loop container should be configured as shown below:
Enumerator: Foreach ADO.NET Schema Rowset Enumerator
Connection String: The OLE DB Connection String for the excel file.
Schema: Tables.
In the Variable Mapping, map the variable to Sheet_Name, and change the Index from 0 to 2.
The connection string for Excel Connection Manager is the original one, we needn’t make any change.
Change Table Name or View name to the variable Sheet_Name.
If you want to load data from multiple sheets in multiple .xlsx files into a SQL Server table, please refer to following thread:
http://stackoverflow.com/questions/7411741/how-to-loop-through-excel-files-and-load-them-into-a-database-using-ssis-package
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How do I find, at-a-glance, the sample size used in several music files?

How do I find, at-a-glance, the sample size used in several music files?
Of all the fields available in a FInder Search, "Sample Size" is not available. Finder does offer a "Bits per Sample" field, but it only recognized graphic files and not music files.
Running 10.8.5 on an iMac i5.
I did search through a couple of communities but came up empty.
Thank you,
Craig

C-squared,
There is no View Option to allow display of a column of sample size.
For WAV or Apple Lossless files, it is available on the Summary tab (one song at a time, as you know). For MP3 and AAC it is not available at all.
You can roughly infer it from the files that are larger than expected for their time.
99% of the music we use is at the CD standard of 16-bit, so I can guess that displaying it has never been a priority. However, if you want to make a suggestion to Apple, use this link:
http://www.apple.com/feedback/itunesapp.html

PSE icons instead of the photo. I need to view photos at a glance. Please help me????

Please help, this is driving me crazy. I have downloaded my free PSE #9, it came with my Leica Camera. I cannot view at a glance any of my photos. There is only an icon that reads, PSE. To view any of my photos, I must click select and then preview. This gets old, and I am doing 4 times the work. I am having to use the dates to guess where my photos might be. I hate this! My old Photo Shop #5 didn't do this. When you went to my pictures, you could see every photo.
I have tried the right click and open as any program. What ever program I choose, that is the icon that appears. No photo. Still no good.
Please help.
Thanking anyone in advance,
Leica

Hi,
Are you using Windows Explorer to view the files?
If so, load Explorer, go to the Tools menu and select Folder Options.
Click on the View tab and make sure the first option (Always show icons, never thumbnails) is not checked.
Click on OK and see if that is any better.
Brian

Is there a way to create a year at a glance with detail and print?

Is there a way to create a year at a glance with detail and print?

To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
Acrobat 9: Advanced > Extend Features in Adobe Reader
Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
I wonder what it will be next time?

Year-at-a-glance view

I have seen many complaints about this iCal missing a "year-at-a-glance" view option (but why ?).
Is there a solution now ? an iCal plugin ? a third party calendar ?
My search on the web was unsuccessful but I have seen the demand for such a tool is huge.
A

Tell Apple. iCal Feedback
AK

Sbo HowTos at a glance

Similar Messages

Maybe you are looking for