SBO Mailer in a cluster environment

Hi,
I am currently facing an issue where when I install SBO Mailer on a cluster environment, the installation removes applications and license manager for some reason gets uninstalled.. When I want to uninstall the SBO Mailer, I do not see it under the Control Panel and neither do I see it in running in services. But if i look at the Service Manager the SBO Mailer Service is running.
The strange part is that after this installation, there is an add-on that stopped working.
Has anyone come across such a scenario?

Hi,
To uninstall you have to first run the Server tools and there you can uncheck the sbo mailer. There is not way you can uninstall SBO mailer service and you cannot find it under control panel its a service...not an applicaiton.
Run the server tools and then choose repair.
Regards,
Rakesh N

Similar Messages

Scheduling,Email Setup in cluster environment and multiple job servers

Hello All,
I have to schedule and email instances of crystal reports to users in PDF and excel format. A Clustered environment of Business Objects 3.1 SP3 is been setup on 2 servers. There is 2 instances of crystal reports Job server been created.
My question is If there are multiple instances of job servers then should we have to configure mail settings on both instances of job server or not?
And secondly, in cluster environment the email settings and scheduling of the reports should be setup on both CMS servers( CMS server 1 and CMS server 2) or should CMS server 1 should be enough?
Thanks in advance.

You have a couple of options here.
1. You can either set up email on all of the job servers on both CMS' in the cluster. This is actually the easiest to manage.
2. You can set up email on some of the job servers on one or the other CMS. However, at this point you would also have to set up a server group that contains the job servers that are set up for email, plus the RAS server - you might also have to include the Crystal Cache server and the Crystal Processing server. Then ALL of the reports that are sent via email would have to be scheduled run ONLY on the server group that contains the email-enabled job server(s).
-Dell

OSB Email Transport polling in multi cluster environment

Hi,
I have following scenario: email needs to be read by OSB proxy using the Email transport. The proxy service service will poll the IMAP mail box and processes messages, upon reading a message message is deleted.
The email transport works fine in a cluster environment by using a dedicated managed node for polling, so no duplicate messages will occur.
However, we have two clusters in our environment pointing to one mailbox. In this case, two clusters have no visibility of each other. So, two pollers may poll the same mailbox.
Please, advice if there any configuration on OSB, Weblogic or IMAP can be done to solve this issue.
thanks,
Djail

Dont think it will work in an Active-Active setup. If you have both clusters listening to same email address then both will receive a copy (just like you receive same email on your desktop's email client and also on your mobile's email client) because SMTP servers distribute to clients similar to how a JMS Topic works.
Dont know if there is a setup in IMAP which will allow an email to be sent to only one client (in this case one of the OSB clusters).
If you want to make it work in Active-Active then you will need to do it at functional level, for ex. after receiving an email if you have any unique id then log that in a transaction table, before calling the backend, check if the same email was already processed by the other cluster. Alternatively, check at the backend before processing it.

Moving ECMI repository to a new location - cluster environment doesn't work

Hello all,
Actually, we have the "default" configuration in the ECMI properties, and we want to move to a new location the File system repository (another disk location).
After reviewing the ECM doc's we found the way and the parameters to reconfigure (ContentStorePath) and we put an absolute path ( "H:\content ') instead "Default" value , but we have an issue on this.
Because our system runs in cluster mode (2 node instances), this configuration only works fine with one node, and the other doesn't work, displaying the "Content Folder Doesn't Exists" error.
Both nodes runs' on separated machines and we want to know what is the correct way to configure this feature in a cluster environment.
Best Regards
Julio C Leyva

I should note that now my local users inside the office are getting outlook errors, showing 3 checkmarks 2 green one red, regarding the cert, and the red checked box says: The name on the certificat is invalid or does not match the name
of the site.
They can bypass the error by clicking Continue, but installing it does only work for a short time before the error comes back. I think that would result from the setup in outlook pointing towards either SRV01 or SRV01.mydomain.local instead of
mail.mydomain.com
The cert error on the android devices was saying Invalid certificate, do you want to continue, or similar, except clicking continue just paused a short while and brought up the same window.
Now I am getting an error, on the android, saying Invalid username or password - when I KNOW it is valid
In regards to DNS being set up correctly - I never had a mail. A record setup prior to purchasing the commercial cert - we just used the router IP in the phones and were able to get activesync working. For some reason with the new IP / ISP we could not access
by IP. So I got the SSL, and added a mail A record to DNS, pointing to our router IP, and our router has always routed activesync/443 traffic correctly, and none of that was changed

SBO Mail

Hello All,
I have configured SBO mailer service in service manager.
Fill valid mail id in company Detail setup.
And now when i send the mail SAP show me Operation completed Sucessfully and i also check in OAOB and AOB1 table for mail status it show *Message Send *
But receiver not recieve then mail ..
So Suggest me where should i check for configuration ?
Thanks
Manvendra Singh Niranjan

Hi,
Please check from sender side, does MAIL Server IP ping ?
Also Check Firewall, whether it's blocking from sender/receiver side on SERVER ?
In your case I think it's firewall issue, for mean while disable firewall on test environment and check it...
Thanks
Kevin

WLS Logs in a Cluster Environment

          We would like to have all WLS logs from the WLS server instances in the clluster
          to be written to the same file on a common file system, such as an NFS mounted
          partition. By default, WLS writes all logs to the local file system. In a distributed
          environment, this can make debugging pretty difficult.
          Has anyone had any experience with having all WLS logs written to the same file?
          Regards,
          Chet


Hi,
To uninstall you have to first run the Server tools and there you can uncheck the sbo mailer. There is not way you can uninstall SBO mailer service and you cannot find it under control panel its a service...not an applicaiton.
Run the server tools and then choose repair.
Regards,
Rakesh N

SBO Mailer Functionality

Hi All,
Can anybody describe me the functonality of SBO Mailer. How to configure it and how it works?
Is it possible to Schedule reports with SBO mailer at a particular time in a day?

If you are interesting in Sceduling Reports then you should definitely look at redisend. It is a comprehensive electronic document delivery solution for SAP Business One.
http://www.redisend.com

Deploying Java Web Application (WAR-File) into a cluster environment

Hi,
we have a web application which has to read from and write to the file system.
Since a short time we have a cluster environment (2 parallel servers) and since thisa time we have the problem, that files are worked double in the cluster. The application is working on both servers now and so we have this problem.
Does anybody know how we have to deploy the application correctly in a cluster environment or do we have to change anything in our source code of the application?
I didn't find any documentation about this.
At the moment we have deployed the application on one of the two servers only, but I think there must be a better way to solve this problem.
Thanks for your replies.
Regards
Thorsten

Hi,
I think first you need to wrap it into an EAR file, then you can deploy it.
As far as I know standalone deployment of WAR is deprecated as of 640.
similar threads:
How to deploy .war on NWDI
Deploying an existing WAR file into the Portal
Hopefully this tutorial also gives some idea:
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/70/13353094af154a91cbe982d7dd0118/frameset.htm
Regards,
Ervin

PI 7.1 in a cluster environment (multiple ip-adresses): P4 port

We want to install PI 7.1 on unix in a cluster environment.Therefore we installed also DEV+QA with virtual hostnames like the prodsystem, which will be later installed.
At all sapinst installation screens we have used only the virtual hostname <virtual-hostname-server interface>.We have also set the SAPINST_USE_HOSTNAME=<virtual-hostname-server interface>. Although the P4-port seems to have used the physical hostname: in step 57 of sapinst we got problems and in dev_icm were:
[Thr 05] *** ERROR => client with this banner already exists:
1:<physical-hostname>:35644 {000306f5} [p4_plg_mt.c 2495]
After we have set
icm/server_port_1 = PROT=P4,PORT=5$$04, HOST=<virtual-hostname-server interface>
icm/server_port_6 = PROT=P4,PORT=5$$04, HOST=<virtual-hostname-user interface>
icm/server_port_7 = PROT=P4,PORT=5$$04, HOST=<physical hostname>
icm/server_port_8 = PROT=P4,PORT=5$$04, HOST=127.0.0.1
the sapinst was successfull.
Now we're not sure how to set these P4-parameters in our future productive cluster environment.
Our productive system PX1 will live in a HA environment, so we don't want to use the physical hostnames in any profile.
Our environment will look like:
HOST-A (<physical-hostname-A>):
<virtual-hostname-server interface>
<virtual-hostname-user interface>
HOST-B (<physical-hostname-B>):
Normally our prodsystem will live on Host-A (physical-hostname-A). All parameters should
only take the virtual hostname <virtual-hostname-server-interface>. During switchover the
virtual hostnames (server and user interface) will be taken over to HOST-B, while the physical
hostnames of HOST-A and HOST-B will stay like there are.
How do the parameters have to be set here ?
Have also the physical hostnames of both cluster nodes set in the
instance profile, e.g:
icm/server_port_1 = PROT=P4,PORT=5$$04, HOST=<virtual-hostname-server interface>
icm/server_port_6 = PROT=P4,PORT=5$$04, HOST=<virtual-hostname-user interface>
icm/server_port_7 = PROT=P4,PORT=5$$04, HOST=<physical-hostname-A>
icm/server_port_8 = PROT=P4,PORT=5$$04, HOST=<physical-hostname-B>
icm/server_port_9 = PROT=P4,PORT=5$$04, HOST=<localhost>
Any recommendations ? In note 1158626 is some infomation regarding P4 ports with multiple network interfaces, but it's not 100% clear for us.
Best regards,
Uta

Hi Uta!
Obviously we are the only human beings in the SAP community having this problem. Nevertheless let's give it another try with a - hopefully - more simple problem description (and maybe it will be helpful to copy and paste this description into the open SAP CSN also).
So here comes the scenario:
We have one physical host:
Physical hostname: physhost
Physical IP address: 1.1.1.1
On this physical host there is running one OS: SUN Solaris 10/SPARC
On top of this we have two virtual hosts where we install 2 completely independent PI 7.1 instances with separate virtual hostnames and separate virtual IP addresses and separate DB2 9.1 databases. That is this is not an MCOD installation.
Virtual Host no. 1 is PI 7.1 Development System:
Virtual hostname: virthostdev
Virtual IP address: 2.2.2.2
Java Port numbers: 512xx
Virtual Host no. 2 is PI 7.1 QA System:
Virtual hostname: virthostqa
Virtual IP address: 3.3.3.3
Java Port numbers: 522xx
With this constellation we face serious problems with the P4 port. Currently for example the JSPM for virthostdev does not start, because JSPM cannot connect to the P4 port.
In SAP note 1158626 we have learned that by default always the physical hostname/IP address is used to address the P4 port and that we have to configure instance profile parameter icm/server_port_xx to avoid this.
So how do we have to configure the instance profile parameter icm/server_port_xx for both systems to resolve these P4 port conflicts?
Additionally: Is it important to use distinct server port slot numbers xx in both systems?
Additionally: Is it possible to configure this parameter with hostnames instead of using IP addresses?
So far we have tried several combinations, but with each combination at least one or even both systems have problems with that f.... P4 port.
Please help! Thanx a lot in advance!
Regards,
Volker

SBO mailer working fine but attachment is not coming

Dear All
We have configured the sbo mailer and mails are coming accordingly also, but attachments are missing in mails.
*** SAP Business One Client Log ***
WaitForSingleObject has finished with return value:0
SAP Business One Client return code:0
Distributing results
Unable to extract HTML report output to file C:\Windows\TEMP\Report.html Error code:-2028
Unable to extract PDF report output to file C:\Windows\TEMP\Report.pdf Error code:-2028
Unable to extract XML report output to file C:\Windows\TEMP\Report.xml Error code:-2028
SMTP Server: secure.emailsrvr.com:25
Sender Email: USER<[email protected]>
Sending email to [email protected]
Schedule processed
Please suggest the solution.
Regards
Ravi

Hi Ravi,
Please check Right of Attachment Folder for user.
If user is not having Right to access Attachment Folder then Attachment will not come in mail.
Please provide sufficient right to user for attachment folder then check.
Hope this helps
Regards::::
Atul Chakraborty

Steps to upgrade kernel patch in AIX cluster environment

Hello All,
We are going to perform kernel upgrade in AIX cluster environment.
Please let me know the other locations to copy the new kernel files ,
default location
CI+DB server
APP1
Regards
Subbu

Hi Subbu
Refer the SAP link
Executing the saproot.sh Script - Java Support Package Manager (OBSOLETE) - SAP Library
1. Extract the downloaded files to a new location using SAPCAR -xvf <file_name> as sidadm.
2. copy the extracted files to sapmnt/<SID>/exe
3. Start the DB & Application.
Regards
Sriram

SAP R/3 4.7 SR1 Migration to MSCS cluster environment

Hi all,
We are planning to move our existing standalone server R/3 production server to cluster environment.
I have some queries regarding this migration
Our R/3 system is running on SAP R/3 4.7x1.10 SR1 on Windows 2003 and Oracle 9.2
1. Central Instance has to be installed in local disk or shared disk
2. Is it correct to R3load procedures to export data from old server and import during Database installation
3. Presently our server is running with kernel 640, but for the new installation kernel will be 620. So when can i upgrade kernel immediately after central instance installation or after CI and DB Instance installation.
Give me some inputs
Thanks & Regards
KT

Hi, the best place for your questions would have been the forum SAP on Windows.
However, here the answers.
1) CI must be on a shared disk
2) Right, if you don't change the database platform and its release you can also use backup/restore
3) Right. You can also perform the installation with the latest NW04 installation master

OSB Polling in Cluster Environiment

Hi ,
I created a OSB Poller which will read data from DB. When I test it in a single server it is working fine but when I move it to cluster environment with two managed servers it is polling Twice from the DB and the reports are generating twice . I have changed the JCA Property <Lock>lock-no-wait</Lock> even then it is polling twice. Any solution Please ?

Hi:
Maybe this link can be useful
http://javaoraclesoa.blogspot.com.au/2012/04/polling-with-dbadapter-in-clustered.html
Regards,
RK
Edited by: RK.. on Dec 16, 2012 7:54 PM
Edited by: RK.. on Dec 16, 2012 7:55 PM

How to setup the cluster environment for BPM using weblogic

want to setup the cluster environment for BPM using weblogic....
i have installed the oracle weblogic server 10gr3 and oracle BPM enterprise for weblogic 10gR3
i have used the Admin tools from the "oracle BPM enterprise for weblogic" to setup the configuration and create the weblogic domain servers.
i can launch the process administrator and import the project exp file to domain server.
but what should i do to setup cluster environment using weblogic?
what i want to do is :
setup one admin machine..
setup two product machine..
enable the cluster so the admin machine can monitor the status of the product machine..
thanks a lot ...

The install guide at http://download-llnw.oracle.com/docs/cd/E13154_01/bpm/docs65/config_guide/index.html gives a reasonable amount of info on how to do this.
Personally I have not used the OBPM option to configure WebLogic instead I've used the information in the above install guide to create the weblogic domain in advance of configuring OBPM.
Once you've setup WebLogic configure OBPM using the values I mention in the following thread: How to set the JMX Engine parameter in Process Administation?
Let me know any specific config questions and I'll do my best to answer them for you.
Thanks,
Mike

Changing the listener port number in a cluster environment

Hello,
I have an Oracle 10g database on a Windows cluster environment with Oracle Fail safe. I am trying to change the default listener port number - these are the steps I have done to change the port number:
1) Take the listener offline via Oracle Fail safe
2) stop the original listener from the command line
3) change the port number in the listener.ora file & save
4) start the original listener
5) bring the listener online in Fail safe
6) register the listener in the database with ALTER SYSTEM SET LOCAL_LISTENER....
After all this, when i check the status of the listener via lsnrctl, i see that the new port number is used, however in the Fail safe administrator, I still see the default port 1521. How do I go about changing the port number so that Fail safe also registers the change?

I did troubleshooting to verify the group, but this just changed the port number back to the default in the listener.ora & tnsnames.ora.
So I did all the steps again to change the port number from the default to another - via lsnrctl status, i see that the new port number is being used, I can also log in to the database via Toad using the new port number, in v$parameter i see that the local_listener is registered on the new port number....only under the Fail Safe manager, the port number (under listener parameter) has not changed....it still shows the default port number. Anyone know how to change this???

SBO Mailer in a cluster environment

Similar Messages

Maybe you are looking for