SBO - Using the SAP supplied AIO_Material_Master template - Extend Material

Hoping someone can help here.
I am using Using the SAP supplied AIO_Material_Master template. I have read the DataMigration_8_Material_EN_US.doc and could not find anything. How can we extend our Material accross all Plants? What are your suggestions?
Cheers,

Not sure if I fully understand as I am new to SBO.
I have created a plant table also within the plant table I have created columns for the different views that would be created under each plant for that Material.
So I am thinking I need to start at the MaterialMasterHeader_E1BPE1MATHEADER_Required.
How should I do this. I was thinking maybe placing everything in a While Loop(???). But not exactly sure how. If I map to this table?? how do I flow through all of the dataflows?

Similar Messages

I am using the big date calendar template and when I submit it to apple for printing I lose the name of two months. These names are not text boxes. I see the names when I send it in but something happens during the transmission to apple. It was suggested

I am using the big date calendar template in iPhoto. I am on Lion 10.7.2, macbook air. The names of the months are on each calendar page but something happens when I send the data to Apple. The names are part of the template. They are not text boxes. I lose two names on the calendar after it is sent to Apple. Apple suggested I make a pdf file of my calendar before sending it in and check to make sure every name shows. I did this with a calendar I just sent in. The calendar was correct. All names of the months were showing. After sending the data two month names disappeard because when it arrived by mail, it was incorrect. Apple looked at my calendar via a pdf file and it was incorrect. This is second time this has happened. I called Apple and they had me delete several folders in the Library folder, some preferences and do a complete reinstall of iPhoto. I have not yet remade the defective calendar. I am wondering if anyone else has had this problem?
kathy

Control-click on the background of the view all pages window and select "Preview Calendar" from the contextual menu.
You can also save the pdf as a file to compare to the printed calendar. If the two names are visible in the pdf file then the printed copy should show them. Contact Apple for a refund. Apple Print Products - Apple Store (U.S.)

Search help for Web Dynpro using the SAP-search help

Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!

Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen

Can I use the power supply of 4507R into 4507R+E?

Can I use the power supply of 4507R into 4507R+E?
I have two old 4507R with 1300W power supply，now I want to upgrade to 4507R+E，Can I use the power supply of 4507R into 4507R+E?

According to this Q&A you can:
Q. Can I use the existing Cisco Catalyst 4500 power supplies in the E-Series chassis?
A. Yes.
Link:
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/prod_qas0900aecd806d8b06.html
HTH

Access BAPIs Using the SAP Java Resource Adapter

Hi experts,
Can someone tell me how to Access BAPIs Using the SAP Java Resource Adapter?

hi Shweta,
Please refer the step by step procedure:
1. Start the deploy tool of the SAP J2EE Application Server with the DeployTool.bat in the directory //<SAP J2EE Engine Installation Directory/.../j2ee/deploying.
2. Choose Project → New Project and enter a name for the new project.
3. Click on the Deployer tab.
4. From the menu path, choose Deploy → EAR → Load Module and select the sapjra.rar file.
5. For the newly created node sapjra.rar, choose Server Settings → Identity Subjects and select Caller Impersonation as authentication type, so that the J2EE user data is used to log on to the ABAP system.
6. Make sure that the J2EE Application Server is running. Connect to the J2EE Application Server with Deploy → Connect.
7. Deploy the sapjra.rar using the menu Deploy → Deployment → Deploy Module.
8. Enter SAPJRADemo as application name and start the application.
9. Close the deploy tool.
10. Start the Visual Administrator again.
11. Select the Cluster tab and switch to <Server Node> → Services → Connector Container.
12. Click on the Runtime tab and choose sap.com/SAPJRADemo → eis/SAPJRADemoFactory.
13. Choose Managed Connection Factory → Properties. On this page, you need to specify the logon data for the ABAP system. There is already some dummy data visible in the property list if no real system data has been specified so far.
14. To change the value of a property, select the property in the list, change the value underneath it, and add the changes using the Add button. At the end, do not forget to save all changes by pressing the button Save Changes. The user configured for the SAP JRA must be the user authorized to read metadata of function modules.

HT4060 My iPad4 will not charge using the cable supplied by Apple using AC current or athrough my computer. Help!

My iPad4 will not charge using the cable supplied by Apple using AC current or the computer. Help!

Here are some things to check when there is a problem charging the iPad. First use the charger that came with the iPad and connect that to a wall outlet.
1. No power in the outlet.
2. Bad charger. Try a different charger.
3. Bad cable. Try a different cable.
4. Dirt, lint or fuzz in the charging ports. Check and carefully clean with a toothpick if necessary.
5. Software glitch. First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
6. Hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Installing oracle on Linux using the SAP version of oracle software

Hello All,
I am trying to install 32bit oracle software on Linux 32 bit os using the SAP version of Oracle Install Software downloaded from marketplace. I have downloaded the required exe and rar files and unpacked them on my PC. The unpacked folder is uploaded in bin mode to the respective server under a common mountpoint. In the folder i have 4 .SAR files with other label files etc. I want to unarchive these .SAR files to get the runInstaller but running in to issues.
Here are the steps I tried:
1. I copied the SAPCAR exe from exe directory and tried to unpack the 4 .SAR files but got permission error. All these 4 .SAR files are owned by ora<sid> user id. I tried to do all these under root user still it fails.
ora<sid>@xxxyysapdbXX:/sapdata//Oracle32/51031674> SAPCAR -xvf OR110232.SAR
-bash: ./SAPCAR: cannot execute binary file
what am i missing?
Any help is greatly appreciated.

If you have a 32bit OS then you need to use the 32bit binaries of SAPCAR - yes.
And:
Usually those SAR files are unpacked by the installation program sapinst, why do you unpack them manually?
Markus

Before lollypop upgrade I could transfer files from LGg3 to computer using the LG supplied USB cord. How do I fix this bug?

Before lollypop upgrade I could transfer files from LGg3 to computer using the LG supplied USB cord. How do I fix this bug?

Is the G3 not recognized by the PC? Or is it recognized and you don't see the ext SD card? Are you able to use the Wireless Storage feature to transfer? Do you have updated USB drivers from the LG support site?

WRT 120N & WRT610N ......use the 12n as a range extender?

Hi all,
I have just changed my WRT120N for a WRT610N is there any way i can use the 120n as a range extender? the signal I get downstairs is quite weak and i was hoping to ba able to use the 120n downstairs to boost the signal.
thanks
Andrew
Never give up!

WRT120N is a router and can't be used a range extender. Although I'm not sure if you can put DD-WRT on it to make it a repeater.
What you can do, run a cable from WRT160N to WRT120N. You have to change the SSID to something unique and channel on WRT120N to prevent interference with WRT160N.

Using the SAP GUI from the NW2004s SneakPreview Download

Hello,
does anyone else have major problems with the SAPGUI from the NW2004 SneakPreview download page?
Im getting a runtime error when logging on:
Runtime Errors         MESSAGE_TYPE_X
Date and Time          24.12.2005 00:34:11
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
     should not occur. Therefore, a termination with a short dump was
     triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
     Control Framework : Error processing control
     Technical information about the message:
     Message classe...... "CNDP"
     Number.............. 006
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Trigger Location of Runtime Error
     Program                                 CL_GUI_CFW====================CP
     Include                                 CL_GUI_CFW====================CM002
     Row                                     23
     Module type                             (METHOD)
     Module Name                             FLUSH

Hello Rich,
the sap gui from the NW2004s SneakPreview page is on patchlevel 8. The problem is when i use the latest sap gui from the service marketplace (full install!) i cant event call the gui. Getting a error when doubleclicking on the SAP Gui icon.
'The procedure entry point 'RfcResetTraceDir' could not be located in the dynamic link library 'LIBRFC32.dll' .'
So actually since i installed the NW2004s on my local notebook the only sap gui "working" (at least i can call it) is the one from the NW2004s Sneakpreview page but im getting this error mentioned here on all systems! not only on the NW2004s system
regards,
Markus

Can i use the SAP standard package for lock object creation ?

Dear Guru ,
I want to create a new lock ojbect for my abap program .
When i completed the creation , SAP required a new request and it said the object only can be imported to SAP standard package .
But i saw the help from SAP said :
>* Package begins with A-S or U-X:
>These packages are for SAP standard objects. Customer objects cannot be created in them. Changes to objects of these packages are recorded by the Transport Organizer (Request management) and can be transported (see field transport layer.
In this case , Can i use one of the SAP standard package for this creation ? Does it will affect the SAP system ( such as the system upgrade ) ?
Thanks .
Best Regards,
Carlos Zhang
Moderator message - Please do not use code tags to format text - it should only be used for code
Edited by: Rob Burbank on May 25, 2010 11:12 AM

Hi Carlos...
First , You will never be able to use any standard SAP Package for your custom programs. So don't go for it.
So in your case what you need to do is , when you save your Lock object ,
- if you want Transport request to be created , then
in the screen shown you need to enter the Z package name (the same package as that of your ABAP Program)
or
-if you want it to be stored as local object , then
specify package as $tmp
Regards,
Uma

Do I need to be accredited to use the SAP SDK?

Hello,
I am software developer working for a small company that uses SAP BO 2005A in the finance and sales department.
I recently discovered the SAP SDK installed on our machines (server and PC's), and after some research and looking at people's sample code here, I have successfully written a small Visual Basic application that could create Sales Orders automatically, saving the company time not having to do the manual entry.
Would anyone know if I would be breaking any SAP contract or agreement if I was to run my little application ?
Do I need to be accredited to use the SDK?
Much appreciated.
Ed Roman
Melbourne - Australia

Hi Lisa,
The SAP service provider looking after us, is very drakonian, My management senses that the contract we have with them could ban us (the Client or anyone else) from interfacing SAP in ways that are not via the SAP Front End.
We recently approached them for a quote to build us a simple Stock checking web service function plus an Order loading application and we were hit with a 20,000 australian dollar quotation, which is close to 15,000 us dollars:- quite excessive in my opinion, given I have just built the application in a few hours using the SDK, I realise we are getting over quoted!
Wanting to be helpful, and being a dotnet developer, after having done plenty of research here at the SAP Developer Network, I have learned how to use the SDK and now I realise how simple it is to interface SAP using the Business Objects DLL.
However, if I run my application using the SDK I fear that our SAP provider could sue us for breach of contract. They might say they hold the exclusive rights to SAP on our Inrastructure to using the SDK DLL's directly.
I want to play by the rules, and I would like to ask them directly where I stand using the SDK, but this might antagonise them and God knows what else! After all, they wuold like to be selling us their solution, if you know what I mean.
It would be nice if I could contact SAP directly and get the truth on the matter.
I appreciate your feedback immensely.
Ed

For GRC 5.3 can I use the SAP GRC 5.2 rule set

We are going for an upgrade to GRC 5.3, I have a small concern here....
Can I use the same ruleset what I used in GRC 5.2 to SAP GRC5.3 ...?
because when I checked ruleset at permission level in GRC 5.2 it displays first object of an action from one function conflicting with first object of an action from another function, where as in GRC 5.3 it displays all objects of an action from one function vs all objects of an action from another function....
How will it impact analysis in GRC 5.3 with old rule set...?
appreciate your response & thanks in advance.

Hi,
Here you will find the documentation to get Upgrade/Configuration Guides.
[https://websmp103.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000718172&]
SAP BusinessObjects Governance --> Access Control ---> SAP GRC Access Control 5.3
There you will find a Upgrade guideline.
Cheers,
Martin

Use the SAP Fiori Client

Dear Community,
I have been creating simple apps using SAPUI5. Especially the sap.m library is very useful in creating applications on mobile apps. Recently I came across the SAP Fiori Client:
SAP Fiori Client on the App Store on iTunes
This seams like a nice gadget for getting a better performance out of web application. However, I am not able to get something running in this client. All I get is a white screen. I do the following:
1.) Create a new app or download a Fiori app via se38->/UI5/UI5_REPOSITORY_LOAD and make some changes in eclipse
2.) Upload the app to our NW gateway using the team provider
3.) Use runs as->Run on ABAP server
4.) Grep the URL and paste it in the settings of the Fiori Client on my Iphone.
As mentioned before I only get a white screen in the client. If I open the URL directly in the browser of Iphone everythings is fine. Is there something I have to add to my app in order to get it running in the sap fiori client? In the documentation of the client I have not found any hints.
Perhaps anybody can help me out on this one.
Regards
Frank

Hello John,
thanks for the quick reply. I was using the URL for a specific Fiori app, created when I pressedthe run as->run on ABAP server in eclipse.
So I think your suggestion with the Launchpad is the correct way to go. How do I configure the Fiori Launchpad?
Do you have a reference on this topic? I have found some stuff via google, but I am not sure if this is a good one. (Setup of SAP Fiori Launchpad - SAP Fiori for SAP Business Suite - SAP Library )
Regards
Frank

Use the XML with data template

Hi,
I want to use double sql query with data template.
How can I do ??
Thanks...

it's okey, I had use a rtf file insead and search/replace my keywords using the String.replaceAll(String, String) function...

SBO - Using the SAP supplied AIO_Material_Master template - Extend Material

Similar Messages

Maybe you are looking for