SbRIo time sync with SNTP server
Hi!
I'm syncronizing a sbRIo with a time server as described here:
http://digital.ni.com/public.nsf/allkb/F2B057C72B537EA2862572D100646D43?OpenDocument
I've a couple of questions:
1) what happens if the time server becomes unreachable?
2) can source.sntp.address be specified as a name address to be rosolved by a DNS? (It seems to me that if the name can't be resolved the board boots in safe mode...)
thanks in advance for any reply,
Marco
p.s. sorry for cross-posting (http://forums.ni.com/t5/Real-Time-Measurement-and/sbRIo-time-sync-with-SNTP-server/m-p/1951123),
but the problem is quite urgent...
Solved!
Go to Solution.
Hi Marco,
1) If the SNTP time server becomes unreachable, the cRio will update the local time independently, starting from the last time value get from the server
2) You are right, it doesn't work properly. The right way to express the SNTP source is using IP address
Regards,
Andrea R.
Similar Messages
-
Please help troubleshoot why SM-SRE WAAS module can't time sync with NTP server
I have a remote WAAS site where a SM-SRE-900 module is plugged in a 2945 router. Everything is fine except the module can't sync its time to the NTP server. Its NTP was configured right and it can reach the NTP server with no problem. There's no authentication configured. But somehow it can't associate with the NTP server. I have tried manual NTP sync, but it failed too.
The same NTP server and config is also used for many other WAAS site and the CM. They are all fine. I'm running WAAS 4.2.3 build 7. The module isn't showing any other alarms.
Here is some show outputs and the manual NTP sync result. I noticed its poll is only 64 seconds while all other sites are showing 1024 seconds.
waas1#sh ntp status
ntp enabled
ntp authentication disabled
server list:
Server Key
10.0.0.1 -
remote refid st t when poll reach delay offset jitter
==============================================================================
10.0.0.1 66.96.98.9 3 u 43 64 377 16.828 2359370 2421.24
waas1#ntp 10.0.0.1
16 Dec 22:06:20 ntpdate[9835]: bind() fails: Permission denied
Failed to set software clock using NTP server 10.0.0.1What the SRE-900 have as it's time? Use the show clock command. Does it match within a few minutes of ntp already, if not, and if this is not the first first clock set out of the box, then ntp sync might fail.
You might try to manually set the clock correctly (set clock ... something), then see if the ntp server will sync. -
How to configure oracle 6i report server run time component with application server
we got oracle 6i report server for developing the web based reports for our undergoing product. we r succesed in developing the web based reports using oracle 6i report server.But we r facing problems while deploying the product with oracle reports at clients place,why because the client does not have the oracle 6i report server. To solve this problem we have to configure the oracle 6i report server run time component with application server at client side , but we are unable to configure this component(that is CGI handler).
You can run multiple instances of Reports Server in 6i.
In tnsnames.ora, for each server, have a different name and each listening to different port.
For example,
server1.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1949))
server2.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1950))
Also, if you want to know about Reports Server Clustering, you may refer to "Publishing Reports" document on OTN:
http://otn.oracle.com/docs/products/reports/pdf/A73173_01.pdf -
How do I sync my new ipad mini with my old ipad 2, without losing any apps or data in notes? I need step by step instructions for first-time sync with ipad mini. Thanks.
If you synced it many times, you have to have a backup. It's just a question of how old that backup is now. When did you last sync?
First of all launch iTunes on your computer and go to Edit>Preferences>Devices. Do you see any backups for you iPad in that window? If so, how new is the newest backup? That will be the backup that you will want to use. But remember that if you use that backup and it is one month old, you can only restore from that date back in time. Anything that you did on the iPad in the past month will not be in that backup.
Turn on the new iPad Minin and start activating OTA via WiFi. You will get to a certain point in the process where you will be given the choice to Set up as new, Restore from iCloud - or Restore from iTunes. You will want to select Restore from iTunes.
That is the short and sweet version. There are step by step instructions in this article. This applies to the mini as well as the iPad 4 or the iPad 3 for that matter.
http://www.everythingicafe.com/how-to-set-up-new-ipad/2012/03/16/ -
Calendar will not sync with Exchange server or most Google Calendars
Hi,
I am writing about my wife's brand new Samsung Charge on Verizon. We managed to setup both her gmail account and her work exchange server account fine, except for the calendars:
Her Google calendar shows up fine, but I am unable to even see any other Google calendars that she has access to (both her own secondary calendars as well as calendars that others have shared with her) in order to select them to be visible.
Her exchange calendar says it is enabled (on the list of available calendars), but no events at all show up.
This behavior is with the latest software updates on the Charge (2.2.1 firmware, I510.EE4 build) using its stock calendar software. I did notice that if I use Smooth Calendar, it does list all of her Google calendars under its listing of available calendars, but it still only shows data from her primary calendar. This is also true using the Touch Calendar app, which leads me to believe that there is some problem within the Google Calendar sync software that is not allowing her calendars to appear correctly.
Thanks!Hello whereizben,
I see you have posted same post in another thread. I have already replied to that posting with a solution. Please see the following link for my reply:
Re: Calendar will not sync with Exchange Server
Thanks, again, for posting! -
I have a sync account and used to keep sync with Firefox server. Now computer got re-installed(OS) and want to sync data from Firefox sync server. But I am unable to setup as i don't have sync key.
I would like to just sync with Firefox Sync Server with existing account. I can not find any way out for this. please reply me on
[email protected]hello, for the old sync system in firefox 28 and below you also had to sign up with a mail address and password originally - to connect firefox to the old account you would need to have all those three pieces (mail, password & recovery key) available to you unfortunately...
-
Can't sync with exchange server after updating to ios 5.1.1
I can't sync with exchange server after upgrading to ios 5.1.1. have restored and reset phone and also have deleted the account and added back in; still no luck
+1// help
-
Mac Reminder (Mountain Lion) cannot sync with Exchange Server 2010
Hi All,
My boss is using iMac reminder (Mountain Lion), iPhone and iPad sync with his Exchange Server account, He cannot sync Mac reminder with Exchange Server last week. However, there are no sync problem of iPhone, iPad and the other iMac.
My boss mail to me 'Just noticed that my iMac reminder is not in sync with the server. IOS device is in sync though. Tried unchecking calendar+reminder on account setup and rechecking but still no good. Any ideas?'
Could anyone help me?
Thanks,Started experiencing this same issue with new Macs on Moutain Lion connecting to MicroSoft Exchange Server.
ERROR Says:
Calendar can't save the event "event name here" to the Exchange server.
The account "describes calendar name" currently can't be modified. to discard your changes and continue using the version of your calendars that's on the server. click Revert to Server.
Then gives the buttons "Revert to Server" "Try Again" or "Ignore"
!!! Somehow it seems like this is a known issue, otherwise WHY would Apple have given us those 3 buttons to click on?
Needless to say this is causing productivity problems as it disrupts the very busy schedule of many users. Apple needs to provide some workaround for this. -
Imported email synced with IMAP server?
Hey guys,
I'm about to import a couple of emails into an email account on a machine and wanted to know if these email are being synced with the server and appear on all devices?
Thanks in advance
ConstantinAnything on an IMAP server should appear on all clients that connect to the same account.
-
How often syncs Firefox sync with the server were my bookmarks are storaged? Can I turn of the historical sync because one computer is at home and the other is at work. So I use totally different webpages and would like to have the history disabled.
OK, I found the part about history. It is just to unmark that.
But still i wonder how often it sync? Instantly? Or when closing FF? -
Problem with Adobe AIR Offline sync with ColdFusion server
I having problem to sync with local and remote db, environment.
- Flex Hero.
- Coldfusion 9.0
- MySql 5
The GlobalVars follow same as http://www.adobe.com/devnet/coldfusion/articles/offline_air_orm.html.
The problem is when I create a user (entity at both size), it can be stored in local db without problem, but the session.save(obj) process didn't trigger commit to remote server (ColdFusion), (SyncManager.autocommit = ture), I tried set AutoCommit = false then use session.commit() to manually commit it, it didn't work neither.
Anyone have same problem?
Thanks in advance.
Cow.
GlobalVars.as (part):
//public static var syncmanager:SyncManager = new SyncManager();
public static var Port:int=8500;
public static var Server:String="localhost";
public static var serverCFC:String = "DonkeyTravel.services.cusManager";
public static var CurrentPage:String;
public static var dbFile:File =File.userDirectory.resolvePath("CustomerManager.db");
public static var dbDir:File;
public static var CacheInt:int = 1;
public static var Online:Boolean = false;
public static var OnlineImage:String = "/assets/ball-32.png";
public static var OfflineImage:String = "/assets/ballred-32.png";
public static var Changes_present:String = "/assets/32TRUE.png";
public static var On_Off_Image:String;
[Bindable]
public static var productListComboItems:ArrayCollection = new ArrayCollection();
[Bindable]
public static var CustomerListComboItems:ArrayCollection = new ArrayCollection();
public static var myTimer:Timer = new Timer(15000);
myTimer.start();
myTimer.addEventListener(TimerEvent.TIMER, timerHandler);
public static var syncManager:SyncManager;
public static var session:Session;
public static var PROD_CONFLICT_RESOLVED:String = "prodConflictResolved";
public static var ORDER_CONFLICT_RESOLVED:String = "orderConflictResolved";
public static var CUST_CONFLICT_RESOLVED:String = "custConflictResolved";
public static var evtDisptchr:EventDispatcher = new EventDispatcher();
public static function init():void
var logTarget:TraceTarget = new TraceTarget();
logTarget.level= LogEventLevel.ALL;
Log.addTarget(logTarget);
// Provide Credentials for Server side Connection and CFC
syncManager = new SyncManager();
syncManager.autoCommit = true;
syncManager.cfPort = Port;
syncManager.cfServer = Server;
// Path of the Server side CFC having Sync/Fetch method, relative from CF webroot
syncManager.syncCFC = serverCFC;
//syncmanager.getRemoteObject().setRemoteCredentials("Jayesh","Jayesh");
// THis handler will be called when any COnflict occures while writing back changes on serverside
syncManager.addEventListener(ConflictEvent.CONFLICT, conflictHandler);
OpenLocalDBSession();I having problem to sync with local and remote db, environment.
- Flex Hero.
- Coldfusion 9.0
- MySql 5
The GlobalVars follow same as http://www.adobe.com/devnet/coldfusion/articles/offline_air_orm.html.
The problem is when I create a user (entity at both size), it can be stored in local db without problem, but the session.save(obj) process didn't trigger commit to remote server (ColdFusion), (SyncManager.autocommit = ture), I tried set AutoCommit = false then use session.commit() to manually commit it, it didn't work neither.
Anyone have same problem?
Thanks in advance.
Cow.
GlobalVars.as (part):
//public static var syncmanager:SyncManager = new SyncManager();
public static var Port:int=8500;
public static var Server:String="localhost";
public static var serverCFC:String = "DonkeyTravel.services.cusManager";
public static var CurrentPage:String;
public static var dbFile:File =File.userDirectory.resolvePath("CustomerManager.db");
public static var dbDir:File;
public static var CacheInt:int = 1;
public static var Online:Boolean = false;
public static var OnlineImage:String = "/assets/ball-32.png";
public static var OfflineImage:String = "/assets/ballred-32.png";
public static var Changes_present:String = "/assets/32TRUE.png";
public static var On_Off_Image:String;
[Bindable]
public static var productListComboItems:ArrayCollection = new ArrayCollection();
[Bindable]
public static var CustomerListComboItems:ArrayCollection = new ArrayCollection();
public static var myTimer:Timer = new Timer(15000);
myTimer.start();
myTimer.addEventListener(TimerEvent.TIMER, timerHandler);
public static var syncManager:SyncManager;
public static var session:Session;
public static var PROD_CONFLICT_RESOLVED:String = "prodConflictResolved";
public static var ORDER_CONFLICT_RESOLVED:String = "orderConflictResolved";
public static var CUST_CONFLICT_RESOLVED:String = "custConflictResolved";
public static var evtDisptchr:EventDispatcher = new EventDispatcher();
public static function init():void
var logTarget:TraceTarget = new TraceTarget();
logTarget.level= LogEventLevel.ALL;
Log.addTarget(logTarget);
// Provide Credentials for Server side Connection and CFC
syncManager = new SyncManager();
syncManager.autoCommit = true;
syncManager.cfPort = Port;
syncManager.cfServer = Server;
// Path of the Server side CFC having Sync/Fetch method, relative from CF webroot
syncManager.syncCFC = serverCFC;
//syncmanager.getRemoteObject().setRemoteCredentials("Jayesh","Jayesh");
// THis handler will be called when any COnflict occures while writing back changes on serverside
syncManager.addEventListener(ConflictEvent.CONFLICT, conflictHandler);
OpenLocalDBSession(); -
Domain Controller - Time Syncing with CMOS Clock
Hello!
We have a DC that is syncing time from "local CMOS clock." This DC is a VM (hyper V). Integration services has "time sync" turned off.
I've attempted syncing the DC to an external time source per http://www.thirdtier.net/2011/02/how-to-set-an-ntp-time-server-in-windows-2008-sbs-2008-and-sbs-2011/ and the issue persists.
Also of note - I've attempted syncing the VMHOST to an external source as well, and it is only syncing with CMOS clock
w32tm /config /manualpeerlist:"time.windows.com" /syncfromflags:manual /reliable:yes /update
- results>
I manually restarted Windows Time service, still syncing to CMOS
w32tm /resync /rediscover
- results>
the computer did not resync because no time data was available
w32tm /stripchart /computer:time.windows.com /samples:5 /dataonly
- results>
Tracking time.windows.com [65.55.56.206:123].
Collecting 5 samples.
The current time is 4/14/2014 12:34:41 PM.
12:34:41, -16.0686354s
12:34:43, error: 0x800705B4
12:34:46, -16.0885249s
12:34:48, -16.0981303s
12:34:50, -16.0785199s
w32tm /monitor
- results>
EVEREST.COMPANYNAME.local[192.168.45.34:123]:
ICMP: 0ms delay
NTP: +17.4000482s offset from COMPANYNAME-DC1.COMPANYNAME.local
RefID: 'LOCL' [0x4C434F4C]
Stratum: 1
COMPANYNAME-DC1.COMPANYNAME.local *** PDC ***[192.168.45.31:123]:
ICMP: 0ms delay
NTP: +0.0000000s offset from COMPANYNAME-DC1.COMPANYNAME.local
RefID: 'LOCL' [0x4C434F4C]
Stratum: 1
COMPANYNAME-MGMT.COMPANYNAME.local[192.168.45.33:123]:
ICMP: error IP_REQ_TIMED_OUT - no response in 1000ms
NTP: error ERROR_TIMEOUT - no response from server in 1000ms
COMPANYNAME-DS1.COMPANYNAME.local[192.168.45.32:123]:
ICMP: 0ms delay
NTP: +14.7149589s offset from COMPANYNAME-DC1.COMPANYNAME.local
RefID: 80.84.77.86.rev.sfr.net [86.77.84.80]
Stratum: 2
EVEREST.COMPANYNAME.local = 2k3 box
COMPANYNAME-MGMT.COMPANYNAME.local = old DC improperly removed from domain (aka was just deleted from Hyper V by another technician...)
COMPANYNAME-DC1.COMPANYNAME.local = primary "main" DC, 2k8
COMPANYNAME-DS1.COMPANYNAME.local = backup DC, 2k8
I can provide whatever other info that may prove useful. I've looked @ other posts RE: this issue and feel like I might be missing something obvious, but I am at a loss.
Thank you!Hi,
Is UDP 123 open on the machine? I suggest you try to disable firewall to see if it works.
More information for you:
Can't get NTP time working on SErver 2008 R2 DC
http://social.technet.microsoft.com/Forums/windowsserver/en-US/e5e26e4f-1988-4ec1-8837-6d1d503130e7/cant-get-ntp-time-working-on-server-2008-r2-dc?forum=windowsserver2008r2general
Configuring the Windows Time Service for Windows Server
http://msmvps.com/blogs/acefekay/archive/2009/09/18/configuring-the-windows-time-service-for-windows-server.aspx
Error message when you run the "w32tm /resync" command to synchronize Windows Server 2003 or Windows SBS to an external time source: "The computer did not resync because no time data
was available"
http://support.microsoft.com/kb/929276
Time synchronization is not performed even though the W32Time service is successfully started in Windows Server 2008 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2493006
Best Regards,
Amy -
IPad 2 Contacts sync with Exchange server and change Outlook custom form
Following iPad synchronizing Contacts, we find that our custom form in Outlook is pushed back to the Microsoft default “IPM:Contact”.
It appears that only the first 500 [approximation] contacts are affected. There are 5k contacts and we are seeing no other patterns.
We are not expecting an iOS Contact will resemble that of MS-Contacts, at the same time we are puzzled how iPad is rejecting and then causing ActiveSync to force change to the Exchange server.
Has anyone else experienced this, and can perhaps recommend a workaround?
Environment
MAC iPad2 iOS v4.3.5 attached using ActiveSync
Exchange 2003 SP2
Users are with either Outlook 2003, 2007, or 2010
Thank you very much.
Best Regards.I'm excited to finally sync my work email with my iPhone. Our IT didn't support it and we work off of an Exchange server. I, too, was nervous about which contacts to sync. While I want my work email, I don't need my contacts and would rather have mine from my mac at home. Unfortunately, you can only do one at a time. The following paragraph is from a c net review. Find the entire article here (the part about the Exchange Server is about 1/2 way down):
http://reviews.cnet.com/apple-iphone-3g/
//Once you're ready to go, the iPhone will sync your Outlook e-mail, contacts, and calendar. Be advised that while the iPhone can support multiple POP3 accounts at once (two Yahoo accounts, for instance), it syncs with only one Exchange server and, worse, with only with one calendar or contacts list at a time. If you have a separate personal calendar, your work calendar will replace it once you start the sync. (You'll be notified before it happens.)//
Hope this helps!
Vicki -
TS3276 OS X Mavericks Mail does not sync with Exchange Server
After moving to Mavericks, mail, contacts, anc calendars do not sync with our exchange server. It will set up the first time and then stop sycning. Is there a way to delete the mail app and reinstall. All other Apple devices sync with the exchange server with no issues.
It was my DNS settings. I had my Airpot pointing to OpenDNS, and for some reason iCal and Address Book could not find their way to my exchange server. I changed the setting to use my ISP's DNS and now everything works fine.
-
Office 2011 Task sync with Exchange Server is overwriting data
Originally posted at answers.microsoft.com. No help there. They suggested I try posting here:
A little background in case it's important:
SBS2008 Server w/ Exchange v7 8.01.0340.000
I run an RDC connection to a virtual server running Office 2010 (this is not the same server hosting Exchange)
I run a Mac with OSX 10.6.8 and Office 2011
I use both of these workspaces simultaneously. Previous to installing Office 2011 last month, I ran Office 2010 from the RDC connection. Everything worked fine from that side.
Now that I'm using Outlook 2011 task management is very strange at times. I'm in MacOS 95% of my day. I'd prefer to use Outlook 2011 rather than 2010 through an RDC connection, which is the reason I purchased 2011.
The issue(s): Suppose I create a task in Outlook 2011, and save it; then, later I go back to make edits. If Outlook happens to sync while I have the task open in edit mode, it will get overwritten with the previously saved version. The only workaround
I have found so far is to hit the cmd-s button nearly as frequently as punctuation. At least I never lose more than a sentence fragment.
However, one thing that I can not seem to resolve at all is completion status. If I ever have occasion to re-activate a completed task--which does happen--toggling the 'completed' button back off and saving the task does not re-set its status back
to active. The 'task complete' flag seems to fall outside of the purview of the save function. So, while hitting 'save' regularly when editing tasks retains the data, every time exchange syncs with the tasks, it will mark the task completed again.
I have double/triple checked the server's time and my workstation's time are the same--down to the second. I've tried closing the Outlook 2010 application on the PC. I've fiddled with the sync services preferences in Outlook 2011 to sync to the
Exchange server, to my computer (and combinations of both); I've set the outlook folder to add new items to the Exchange server and to the local machine. The results are always the same as outlined above.Hi,
Please start Outlook in safe mode and check whether the issue persists. Also make sure there is no third-party autispam program installed in your machine. If there is, please disable it to have a try.
Personal suggestion, if the issue only happens on your Mac with OSX 10.6.8 and Office 2011, I suggest we can ask a question in Outlook 2011 for Mac forum in Microsoft for more help:
http://answers.microsoft.com/en-us/mac/forum/macoutlook?tab=Threads
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thank you for your understanding.
Regards,
Winnie Liang
TechNet Community Support
Maybe you are looking for
-
how can I exit from the suggested product to purchase and finish step 3 of the installation of latest version of adobe flash player?
-
Can i still sync my files even though i have corrupted files?
so i just put my itunes library on my new mac laptop from my pc. on my pc i have that stupid thing where it says it lost the pathway and i guess the files are now corrupted. BUT they still play on my ipod. I have synced my ipod several times not real
-
When I try to open Firefox, I get an error message that reads "The procedure entry point ?CreateDrawTargetForCairoSurface@Factory@gfx@mozilla@@SA?AV?$TemporaryRef@VDrawTarget@gfx@mozilla@@@3@PAU_cairo_surface@@ABUIntSize@23@@Z could not be located in
-
Macbook Air Sharpness & Colour Problem
Hey, I just received my Mac yesterday and I'm already having buyer's remorse. How come if the resolution of the Macbook Air is higher than the Pro, the colours don't look as good and the fonts are not smooth or as sharp as the Pro? I was just wonderi
-
Hi guys, My machine is with Windows 2000 server pack 4, I install oracle 8i and it runs correctly. Now when I install Forms 6i at the same laptop, it just displays the welcome message of orainst and then abort, I tried serveral times and couldn't get