SBS 2008 Shares
Hi,
Got an intermittent problem with SBS2008 shares being accessed from Mac 10.6.3 workstations.
A lot of the time everything is ok but occasionally (with no real pattern) it will take upwards of 30 seconds to open a folder up and my clients are getting annoyed.
I cant find anything in my windows server logs and the windows clients on ym network are fine, so i think this is an OSX issue/finder issue.
Can anyone shed any light?
TIA
Mark
polite bump
Similar Messages
-
I have a SBS 2008 DC I would like to be able to change the Folder Redirection to a different server. I also would like to be able to test with one user. I read on the forums that it is best to use the wizards for SBS2008. The only problem
I have with using the wizards is that I am unable to test and I am also unable to use a network share for my redirection location.Hi,
I am sure you would get some help from :
http://blogs.technet.com/b/sbs/archive/2010/10/08/folder-redirection-in-small-business-server-2008.aspx
https://social.technet.microsoft.com/Forums/en-US/448583ca-471e-4a0c-9d26-aa9181e73962/folder-redirection-changing-location?forum=smallbusinessserver
User setting can be found:
Windows SBS Console > Shared Folders and Web Sites > Shared Folders - in Tasks panel click on Redirect folders for user accounts to the server.
Under Folder Names Select folder(s) you want to redirect (e.g. Documents).
Under User Accounts select accounts you want to have folders redirected.
Click OK
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
I'm trying to remove Exchange 2007 from an SBS 2008 server
(Server 2008 Standard FE). My ultimate goal is to completely remove the SBS 2008 Server from the network environment.
We have an Exchange 2010 Coexistence Scenario and Mailboxes/Public Folders/etc have been moved over to the 2010 mail server, on Server 2008 R2.
I have moved all Shares, FSMO roles, DHCP, DNS, etc over to their respective servers. We have two full blown DC's in the environment.
I'm ready to remove Exchange 2007 from SBS 2008 and DCPROMO the server. I can NOT seem to find a TechNet article that shows me how
to proceed in this kind of scenario. I am trying to use the TechNet article:
http://technet.microsoft.com/en-us/library/dd728003(v=ws.10).aspx
This article references Disabling Mailboxes, Removing OAB, Removing Public Folder Databases, then uninstalling Exchange using the Setup Wizard.
When I go to Disable Mailboxes I get the following error:
Microsoft Exchange Error
Action 'Disable' could not be performed on object 'Username (edited)'.
Username (edited)
Failed
Error:
Object cannot be saved because its ExchangeVersion property is 0.10 (14.0.100.0), which is not supported by the current version 0.1 (8.0.535.0). You will need a later version of Exchange.
OK
I really don't see why I need to Disable Mailboxes, Remove OAB and Public Folder Databases since they have been moved to 2010. I just want
to remove Exchange 2007 and DCPROMO this server (actually I just want to remove any lingering Exchange AD Objects referring to the SBS 2008 Server, using the easiest and cleanest method possible).
Can someone point me in the right direction?
Thanks!Hi,
Based on your description, it seems that you are in a migration process (migrate SBS 2008 to Windows Server
2008 R2). Now, you want to remove Exchange Server and demote server. If anything I misunderstand, please don’t hesitate to let me know.
On current situation, please refer to following articles and check if can help you.
Transition
from Small Business Server to Standard Windows Server
Removing SBS 2008 –
Step 1: Exchange 2007
Removing SBS 2008 – Step 2:
ADCS
Removing
SBS 2008 – Step 3: remove from domain / DCPROMO
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Hope this helps.
Best regards,
Justin Gu -
Snow Leopard/SBS 2008: Empty folders out of root?
Hi,
We have our iMac connected to a SBS 2008 server. We can access the root directory of the server's SMB shares without problem, however all sub-folders are blank when navigated to in Finder.
Oddly enough their contents is shown when navigating using an Open dialog from within an application.
What is going on? Thanks.Hi Arnel,
Please refer to the suggestion that Merv Porter provided. It will help you to recover Disk Space.
Just additional. In MonitoringServiceLogs, Contains logs for SBS Monitoring and its associated data collection
tasks. Also, please refer to following articles. It will help us to understand the winsxs folder and Installer folder better.
What is the WINSXS directory in Windows 2008 and Windows Vista and why is it so large?
http://blogs.technet.com/b/askcore/archive/2008/09/17/what-is-the-winsxs-directory-in-windows-2008-and-windows-vista-and-why-is-it-so-large.aspx
Should you delete files in the \WinSXS directory? And what’s the deal with VSS?
http://blogs.technet.com/b/joscon/archive/2010/08/06/should-you-delete-files-in-the-winsxs-directory-and-what-s-the-deal-with-vss.aspx
Can you safely delete files in the %windir%\Installer directory?
http://blogs.technet.com/b/joscon/archive/2012/01/18/can-you-safely-delete-files-in-the-windir-installer-directory.aspx
Hope this helps.
Best regards,
Justin Gu -
Macbook pro with OS 10.6.4 cannot join Windows SBS 2008 .local domain
Hi,
I just had a windows SBS 2008 installed and it controls a .local domain where all my Windows7 PC's are connected to. I can access the internet wired/wirelessly but i cannot see any of the computers on the network at all, thus i cannot share files or share the printer which is connected to one of the local PC's.
I have read many threads indicating possible fixes but no one has been able to give me a permanent solution. Is this inability to connect my MAC to the SBS 2008 local domain fixable from my MAC or is it to be resolved from the SBS 2008 side? Any help would be greatly appreciated.Greetings,
Download the combo update (don't install it yet): http://support.apple.com/kb/DL1400
SafeBoot your computer: http://support.apple.com/kb/HT1455
While in SafeBoot install the combo update
Restart the computer to come out of SafeBoot
Try running software update again and see if it works.
Hope that helps. -
SBS 2008 PREMIUM - Migration to Office 365 (E3)
Hi,
I have two customers running 'Windows Server SBS 2008 Premium' and wondering to migrate their environment to 'Office 365', since this is an old version of Windows cannot run the AD FS tool (as my previous post
https://social.technet.microsoft.com/Forums/exchange/en-US/4b5d7942-f9a6-4138-9ba8-596a35e36754/sbs-2008-microsoft-azure-active-directory-module-for-windows-powershell-is-not-supported-by-your?forum=WindowsAzureAD) they will create a new environment with
Windows Server 2012 R2.
Looking at 'https://www.skykick.com/products/small-business-migrations' isn't clear about Active Directory
migration or sync.
Can someone share thoughts and review if my plan is correct to use this tool?
- install a new server and AD domain;
- install SSL and AD FS tool in a way to integrate it with Office 365 Servers
- migrate computers from old DOMAIN (SBS 2008) to the new one (W2k12)
- use this tool to migrate contents from old infrastructure
Any help is appreciated.
tks,
Renato PHi ,
Thank you for posting your issue in the forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
Has anyone completly migrated/moved SBS 2008 to Office 365 ?
Hello All,
We have a client with SBS 2008 and would like to moe all AD/ emails / data / possibly some 3rd party applications like QuickBooks (This is not confirmed yet) to office 365 and once moved would like to decommission the SBS 2008 box so from that
point onwards everything including AD authentication would be done via office 365.
I have seen articles/information about moving exchange/data etc. but not the whole infrastructure to office 365 and depend entirely on office 365 without any onsite servers.
Has anyone tested this method? if so please let me know your feedback.
Also what are the cons of depending solely on office 365 apart from the obvious , office365 or internet outages , lack of full control etc.
Regards,
DhanushkaFirst off that's not possible. Unless the application can run natively inside SharePoint, Office 365 does not give you NTFS file share platform for which to install QuickBooks.
Email and SharePoint yes. Native file shares no.
What can be done however is look over to Azure. On Azure you can turn on Remote desktop services, host a file sharing server in Azure/then host desktops in azure, use the Essentials role to hook into Office 365.
But bottom line what you think can be done in 365, can't all be done in 365. It needs Azure.
http://blogs.msmvps.com/bradley/2014/09/04/no-office-but-still-need-a-server-something-to-think-about/
My blog -
I have a client that is having some very odd issues with indexing on SBS 2008.
The primary concern is when they perform a search from a Windows 7 machine, all data being searched is in a network share on the sbs 2008 box, only some of the results are being shown. However if we manually navigate to the same directory the file
searched is clearly there. They have also noted that there are occasions where the search will say no results found - in this case we can also manually browse to the file with no issues.
At this time my leading theory is the size of the index is just too big for this sbs box to handle. So I would like to help them trim down the items being indexed. So the question is:
Will there be any adverse effects if we remove the exchange directory from the index? If so what are they potentially going to be?Hi,
Regarding the current issue, please let me know if you have installed Windows Search service on SBS 2008? In addition, have you installed the Index Service on it? For details, please refer
to the following articles.
Find Items Faster with Windows Search and Libraries
https://blogs.technet.com/b/sbs/archive/2010/04/05/find-items-faster-with-windows-search-and-libraries.aspx
How to install and configure the Indexing Service on a Windows Server 2008-based computer
http://support.microsoft.com/kb/954822/en-us
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
Server 2012 std not able to see Domain, DC and DNS on Win SBS 2008 std Domain
Hi There
I have a HP ML 110 G5 SBS 2008 std server as my DC on my network. I recently added a HP Microserver running Server 2012 std (with no roles or features installed) to act solely as a file server for a 3rd party program as the program was not running efficiently
on the main server.
The problem I am having now is that the 2012 server keeps falling off the domain and cannot contact DNS server. I have also had to re-enable remote desktop several times. It also shows the 2012 Server as being on a private firewall profile and not on the
domain firewall profile but I suspect that this is part of the same problem.
the resulting problem that this is causing is that the local machines that need to contact an SQL database on the 2012 fileserver intermittently either time out or are very slow to connect.
So far I have tried:
Switching from Static IP to DHCP.
Re-adding the server to the domain.
Stopping and restarting DNS services on the DC.
Checking physical Network connections and routing.
Putting the 2012 server into the same Organizational Unit as the 2008 DC.
Has anyone else encountered this problem when adding a 2012 server to a 2008 domain? I have a feeling that the solution is probably something simple that I've overlooked, but I can't think what. Any help would be greatly appreciated.
Regards
Russ
Also, as some additional info -
Event viewer gives the following errors:
Group Policy Error:
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 2015-04-27 01:17:51 PM
Event ID: 1129
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: [SERVERNAME].[DOMAIN].local
Description:
The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has
successfully processed. If you do not see a success message for several hours, then contact your administrator.
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1129</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2015-04-27T11:17:51.111942100Z" />
<EventRecordID>19056</EventRecordID>
<Correlation ActivityID="{C0CBAF2B-1E93-49C0-B910-069AE43F74B2}" />
<Execution ProcessID="732" ThreadID="1336" />
<Channel>System</Channel>
<Computer>[SERVERNAME].[DOMAIN].local</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">1548</Data>
<Data Name="ProcessingMode">0</Data>
<Data Name="ProcessingTimeInMilliseconds">0</Data>
<Data Name="ErrorCode">1222</Data>
<Data Name="ErrorDescription">The network is not present or not started. </Data>
</EventData>
</Event>
DNS Error:
Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 2015-04-27 04:54:58 PM
Event ID: 8015
Task Category: (1028)
Level: Warning
Keywords:
User: NETWORK SERVICE
Computer: [SERVERNAME].[DOMAIN].local
Description:
The system failed to register host (A or AAAA) resource records (RRs) for network adapter with settings:
Adapter Name : {3DDD0E46-D879-48C0-9DF6-5FAC0F1A56C4}
Host Name : [SERVERNAME]
Primary Domain Suffix : [DOMAIN].local
DNS server list :
192.168.2.10
Sent update to server : <?>
IP Address(es) :
192.168.2.15
The reason the system could not register these RRs was because the update request it sent to the DNS server timed out. The most likely cause of this is that the DNS server authoritative for the name it was attempting to register or update is not running
at this time. You can manually retry DNS registration of the network adapter and its settings by typing 'ipconfig /registerdns' at the command prompt. If problems still persist, contact your DNS server or network systems administrator.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-DNS-Client" Guid="{1C95126E-7EEA-49A9-A3FE-A378B03DDB4D}" />
<EventID>8015</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>1028</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2015-04-27T14:54:58.599130300Z" />
<EventRecordID>19105</EventRecordID>
<Correlation />
<Execution ProcessID="856" ThreadID="952" />
<Channel>System</Channel>
<Computer>[SERVERNAME].[DOMAIN].local</Computer>
<Security UserID="S-1-5-20" />
</System>
<EventData>
<Data Name="AdapterName">{3DDD0E46-D879-48C0-9DF6-5FAC0F1A56C4}</Data>
<Data Name="HostName">[SERVERNAME]</Data>
<Data Name="AdapterSuffixName">[DOMAIN].local</Data>
<Data Name="DnsServerList"> 192.168.2.10</Data>
<Data Name="Sent UpdateServer"><?></Data>
<Data Name="Ipaddress">192.168.2.15</Data>
<Data Name="ErrorCode">1460</Data>
</EventData>
</Event>Can you post an ipconfig /all from the server and the DC?
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+ -
How can I edit the way autodiscover.xml behaves in SBS 2008 and 2011?
I have autodiscover working correctly on a few SBS 2008 and SBS 2011 servers. But, its doing its usual misbehaving. When setting up a new Outlook profile, the user enters their email address and password. Autodiscover is successful in creating all
the account settings, but at the end of the wizard a username and password window pops up with the users full email address incorrectly filled in as the username, which is why it didn't work.
This has always been so annoying about SBS. The user then has to be told to delete their email address in the username field, then fill in "domain\username" instead. Only then is the authentication successful.
I've read lots about people adding the external domain UPN Suffix to ADD&T, then manually changing ever users login to domain.com instead of domain.local. Then you have to mess with the owa authentication settings in exchange to accept the
UPN. Its all too ridiculous. There must be a simpler way.
I have read about how you can control how the autodiscover.xml behaves, and there are examples of how to do it in this document:
https://docs.google.com/viewer?a=v&q=cache:0jap1FNKgV0J:https://support.quest.com/Shared/Images/SOL51188_Outlook%2520Automatic%2520Account%2520Configuration.doc+&hl=pl&gl=pl&pid=bl&srcid=ADGEESjizUeFf-JYaM7ZdfIgUCKMMXtcCl0Y3pknFbuwd64GNHIEP1K8a_mpg2YIEisP6sz5DzbtVtdW4Pc42PE0Kjd6bz-3vXz0iaQm7FKi0AnwgvFG_41ZAkBLWynaJtf8s8xyi_d2&sig=AHIEtbSie1mEHTn8el4DPquNxrpovwknUQ
The document above shows the settings we need to change. It looks like we can add the local domain using DomainName into the autodiscover.xml and this will stop autodiscover reporting that the full email address is required. So we
should be able to get autodiscover to populate the username pop-up with with "domain\user" automatically.
OK, so my question is, how on earth do I edit these settings in SBS 2011? I can't find any articles that talk about how to edit autodiscover.
If I could just edit this one setting (that Microsoft should have correctly configured in the first place) autodiscover will work perfectly for all existing users and all future users, without having to do anything.Just to straighten out a few things;
1) This is NOT a bug, rather by design. Not every active directory has an exchange server in place, and MS is assuming you don't want to give your internal domain name out to people (which is why it doesn't default to domain\username)
2) Going on what I said in 1), this is NOT SBS specific this is the same way with every Active Directory/Exchange install, keep in mind Microsoft did NOT specially design the software for SBS, they just bundled it into a supported configuration in a neat
little package -since the Exchange server we run on SBS is the same Exchange server powering hundreds of hosted email providers -it makes sense why autodiscover doesn't provide the domain\username (imagine what a mess that would be!)
3) I understand it's a little bit time consuming but it can actually be done for all users in a matter of seconds, select all users, right click and go to Properties, you can then choose the UPN Suffix for all users. When a new user gets created one of the
settings in the wizard is the UPN suffix and is easily changeable as long as you notate for the person creating the user to do it. (The problem here is if you're using the SBS Console instead of AD to setup the User in which case that's just an oversight
in design not a bug in the programming)
4) You can most certainly have a powershell script that changes the UPN suffix from A to B, let me know if you're interested I'll dig one up for you. That can be run on a scheduled task and will solve the remaining issues you have :)
I do see you mentioned it in number 3, I must have missed since I didn't re-read the OP before posting the article, however I just tested on several SBS 2011 machines and OWA authentication settings don't have to be changed at all, this worked immediately
for Outlook Anywhere and Outlook Web Access in my lab and two different customer production systems.
-GreenlightTech -
Problem connecting to MS Exchange 2007 on SBS 2008
I am having problems connecting to Exchange via cfexchangeconnection. Our ColdFusion environment is CF9 Enterprise on Win 2008, and the Exchange host is Win SBS 2008 (which uses IIS7).
After having worked through the documentation and following all procedures outlined at
http://help.adobe.com/en_US/ColdFusion/9.0/Developing/WSc3ff6d0ea77859461172e0811cbec14f31 -7fed.html
plus googling intensively, we have the following method to test the connection
<cfexchangeconnection action="open"
connection="thisExchangeConnection"
server="portal.mydomain.com"
protocol="https"
formBasedAuthentication="true"
formBasedAuthenticationURL="https://portal.mydomain.com/owa/auth/owaauth.dll"
mailboxname="myMailBox"
username="myUsername"
password="myPassword" />
<cfdump var="#thisExchangeConnection#">
<cfexchangeconnection action="close"
connection="thisExchangeConnection" />
The IIS7 implementation in SBS 2008 is quite a lot different to Win 2008, so there are some question marks around some steps in the above documentation. However, we have made sure that:-
1) you can use the credentials above to login via a web browser
2) WebDav is on in IIS
3) there is no IWA and forms based authentication is on
4) certificates are installed correctly on both the CF and Exchange servers
5) the myUsernameaccount has correct permissions in iis/owa/exchange
Despite this, the net result is always
Access to the Exchange server denied.
Ensure that the user name and password are correct.
From research it seems that a lot of people have issues where the underlying problem is actually an Exchange 440 timeout error where the password in the IUSR_<servername> and IWAM_<servername> (IIS/Active Directory) is out of sync.
I was pinning my hopes on the above being the problem but now I find that in SBS 2008 there is no IWAM_<servername> server account.
All this leads me to ask is SBS 2008 actually compatible with the cfexchange tags in CF9? There is nothing in the documentation that I can find that syays that it isn't, but given the amount of time we've spent on what should be straightforward I am wondering if we are on a hiding to nothing. Anyone from Adobe care to comment?
If anyone has managed to get this to work specifically with SBS 2008, or has any advice I'd be grateful to here from you.Hi,
As said by Sneff , I would also recommend to enable Logging to get more detailed information. Also follow
Configuration of POP/IMAP on SBS 2008 Refer to :
http://blogs.technet.com/b/sbs/archive/2008/09/19/how-to-configure-sbs-2008-to-host-pop3-imap4.aspx
http://blogs.technet.com/b/sbs/archive/2011/08/31/how-to-configure-outlook-for-pop3-imap-and-smtp-connectivity-in-sbs-2008-2011-standard.aspx
As per the error code, you need to follow
http://support.microsoft.com/kb/813514/EN-US
I would also disable AV on both Client machine and TEST , including the Filters of AV.
Binu Kumar - MCP, MCITP, MCTS , MBA - IT , Director Aarbin Technology Pvt Ltd - Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Issues After Disabling IPv6 on Your NIC on SBS 2008
If you uncheck the IPv6 protocol from your network interface card on your Windows SBS 2008 server you may see the following issues after a reboot:
Microsoft Exchange services fail to start
Server hangs at “Applying Computer Settings…” (can eventually logon after 30 – 60 minutes)
Network icons show as offline
Some or all of the following events
Application Log Events
Source: MSExchange ADAccess
Event ID: 2114
Task Category: Topology
Level: Error
Description:
Process MAD.EXE (PID=2088). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge Base article 218185,
“Microsoft LDAP Error Codes.” Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
Source: MSExchange ADAccess
Event ID: 2601
Task Category: General
Level: Warning
Description:
Process MSEXCHANGEADTOPOLOGY (PID=952). When initializing a remote procedure call (RPC) to the Microsoft Exchange Active Directory Topology service, Exchange could not retrieve the SID for account <WKGUID=DC1301662F547445B9C490A52961F8FC,CN=Microsoft Exchange,CN=Services,CN=Configuration,…>
– Error code=80040a01.
The Microsoft Exchange Active Directory Topology service will continue starting with limited permissions.
Source: MSExchange ADAccess
Event ID: 2102
Task Category: Topology
Level: Error
Description:
Process MAD.EXE (PID=2088). All Domain Controller Servers in use are not responding: SBS.sbs2008.local
Source: MSExchange ADAccess
Event ID: 2105
Task Category: Topology
Level: Warning
Description:
Process MAD.EXE (PID=2088). Exchange Active Directory Provider failed to obtain DNS records for domain sbs2008.local. DNS Priority and Weight for the Domain Controllers in this domain will be set to the default values 0 (priority) and 100 (weight).
Source: MSExchange ADAccess
Event ID: 2114
Task Category: Topology
Level: Error
Description:
Process MSEXCHANGEADTOPOLOGYSERVICE.EXE (PID=952). Topology discovery failed, error 0x80040a02 (DSC_E_NO_SUITABLE_CDC). Look up the Lightweight Directory Access Protocol (LDAP) error code specified in the event description. To do this, use Microsoft Knowledge
Base article 218185, “Microsoft LDAP Error Codes.” Use the information in that article to learn more about the cause and resolution to this error. Use the Ping or PathPing command-line tools to test network connectivity to local domain controllers.
Source: MSExchangeFBPublish
Event ID: 8197
Task Category: General
Level: Error
Description:
Error initializing session for virtual machine SBS. The error number is 0x80040a01. Make sure Microsoft Exchange Store is running. Also, make sure that there is a valid public folder database on the Exchange server.
Source: MSExchangeTransportLogSearch
Event ID: 7005
Task Category: General
Level: Error
Description:
Microsoft Exchange couldn’t read the configuration from the Active Directory directory service because of error: Failed to load config due to exception: Microsoft.Exchange.Data.Directory.NoSuitableServerFoundException: The Exchange Topology service on server
localhost did not return a suitable domain controller.
System Log Events
Source: Service Control Manager
Event ID: 7044
Task Category: None
Level: Warning
Description:
The following service is taking more than 16 minutes to start and may have stopped responding: Microsoft Exchange System Attendant
Source: Service Control Manager
Event ID: 7022
Task Category: None
Level: Error
Description:
The Microsoft Exchange Transport service hung on starting.
Source: Service Control Manager
Event ID: 7024
Task Category: None
Level: Error
Description:
The Microsoft Exchange Information Store service terminated with service-specific error 0 (0×0).Hi,
Based on your description, it seems to be the same as the following blog.
Issues
After Disabling IPv6 on Your NIC on SBS 2008
Did you mean that encounter the same issue? If so, there is a resolution in that blog, please check if can
help you solve the issue.
If any other issue exists or any update, please don’t hesitate to let me know and provide more details. It
will help me understand clearly.
Best regards,
Justin Gu -
Excessive downloads by an SBS 2008 client bogging down network
Hello. I have been trying to find the source of a vexing problem on my Small Business 2008 network. It only seems to affect 2 computers and only while logged in. One of them is mine, a Windows 8.1 Pro client computer.
The bottom line is my computer is downloading, continuously from the server at two different levels. One I have lived with for a long time, where I my computer uploads and downloads from the server at 1.5Mbps.
The second, and more concerning, is where it downloads from the server at anywhere from 25-110Mbps. This occurs about 50% of the time. I run NetSpeed Monitor so I can track the traffic. This morning alone, it has downloaded over 320GB from
the server and we have a very small server with only 3 GB on the data drive. This is not a problem on most other stations in the network. Only 1 other computer, a laptop, has a similar problem on this scale and I leave it logged off for now.
I can't find any sign of malware on my client computer and scan regularly (with Kaspersky Small Office Security 3).
All of this network traffic is found under one process in both the client computer and the server, System PID 4. I can provide screen shots if it will help.
Our network performance with the SBS 2008 file server is poor and I think this is contributing.
Please let me know what additional information I can provide to help solve this problem. I tried Process Explorer, but that provided no useful info. I'm wondering if it's a rogue service.
The problem is not evident when I first login, but it appears within a few minutes.
Thank you for any suggestions to try,
MikeI'm mostly getting these from WireShark:
258117
25.038883000
192.168.11.5
192.168.11.31
TCP
1514
[TCP segment of a reassembled PDU]
Source Port: 445 (445)
Destination Port: 54628 (54628)
(Hundreds of thousands of these per minute). 192.168.11.5 is the server and 192.168.11.31 is my workstation. -
Error 0xE0000235 when trying to download a driver onto Windows SBS 2008 64-bit Standard FE.
Unfortunately, Error 0xE0000235 occurs when trying to download a driver onto Windows SBS 2008 64-bit Standard FE.
I am installing the GV 800 GeoVision 32/64Bit 16CH Video Capture Card onto the server.
Please urgently assist.
Answer in clear English. Cryptic answers not welcome. Yes...I know you are an intelligent, highly valuable expert on the world's leading edge technology.Hi, I'd like to inform you that the error code 0xE0000235 refers to "Error in WOW64". This can be caused by corrupted or incompatible driver of the Video Capture Card. Similar issue may also occur on other driver on other operating system and I don't think
this can be caused by SBS2008 blocking the driver.
I suggest you contact with GeoVision Technical Support (http://www.geovision.com.tw/english/4_0.asp) and see if their driver should work on SBS2008 and make sure that you have downloaded
latest driver from their site:
http://www.geovision.com.tw/english/5_2.asp
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hope this helps!
Sean Zhu
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Migration from exchange SBS 2008 to Microsoft exchange 20013
i have started an upgrade of an SBS 2008 to an exchange 2013
i installed the 2 server in coexistence and moved all mailboxes as well as all public folders
what should i do next to be able to decommission the SBS and turn it off completely
PS: our company does use third party certificate as all the users are local users on TS server
much appreciate itPlease follow the Microsoft Exchange Server Deployment Assistant
which is web-based tool that asks you a few questions about your current environment and then generates a custom step-by-step checklist that will help you deploy different versions of Exchange Server for different types of scenarios.
http://technet.microsoft.com/en-in/exchange/jj657516.aspx
Exchange Queries
Maybe you are looking for
-
How to print 4 pics in a4 paper DJ2540
How to print four pictures in a paper hp DJ2540
-
hello guys got little doubts while reading little documentation about project preparation stuff.. whats the meaning of 1.identifying business case 2.prototype to management 3.proof of concept system design thanks in adv. Regards, S
-
How to set a song in the playlist to be phone ringtone
how to set my song in the playlist to be my ringtone
-
Any way to change the background/foreground for <jbo:InputText...> and <jbo:InputDate...>
-
Number of movies for which you can only buy and not rent.
Is anyone getting aggravated by the number of movies on demand that you can only buy. It seems as if I am running into this issue all too frequently now. I am beginning to find this very upsetting given the amount of money I pay for my monthly serv