SBS 2008 Update Rollup 3 install fails

The install pauses saying that Windows SBS Manager is using a file and needs to be stopped. Options are: Stop the service or Don't stop the service (a reboot may be required). Either option leads to a failure. The Event Viewer message is attached.
I finally disabled the service before running the install. The result was the same.
Douglas Rost

Hi Douglas Rost,
I can find that you have created
a similar thread before. Just confirm if the question in current thread is the same as that one. If same, I will merge this one to that thread, and then discussion with you there.
In addition, would you please let me know whether you can install this update rollup via Windows SBS Update
Services? Before installation, please close all applications including the Windows SBS Console.
Meanwhile, please run
Windows SBS Best Practices Analyzer (BPA) and check if you can find some clues.
Please also refer to the following article, and check if can help you.
SBS
2008 Update Rollup 3 (KB 969121) Installation Failure
Hope this helps.
Best regards,
Justin Gu

Similar Messages

Exchange 2010 Sp2 update rollup 7 fails with error code 80070643 on Sbs 2011

Hello Everyone,
When i trie to install rollup 7 voor exchange 2010 sp2 (sbs 2011) it gives me error code 80070643. I cannot find much to solve this problem. Update rollup 8 installs fine. I've read on internet that every rollup must be installed to succesfully install exchange
2010 sp3. Can anyone help me with this error?

I just installed exchange 2010 sp3, but it does not finish. It stops at 'client access role'
This is in the log;
[10-08-2014 21:55:24.0121] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: 'server.company.com', Preferred Global Catalog: 'server.company.com', Preferred Domain Controllers:
'{ server.company.com }'
[10-08-2014 21:55:24.0121] [2] Beginning processing Start-SetupProcess -Name:'iisreset' -Args:'/noforce /timeout:120'
[10-08-2014 21:55:24.0137] [2] Starting: iisreset with arguments: /noforce /timeout:120
[10-08-2014 21:55:31.0640] [2] Process standard output: Attempting stop...
Internet services successfully stopped
Attempting start...
Restart attempt failed.
The IIS Admin Service or the World Wide Web Publishing Service, or a service dependent on them failed to start. The service, or dependent services, may had an error during its startup or may be disabled.
Process standard error:
[10-08-2014 21:55:31.0640] [2] [ERROR] Unexpected Error
[10-08-2014 21:55:31.0640] [2] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [2] Ending processing Start-SetupProcess
[10-08-2014 21:55:31.0640] [1] The following 1 error(s) occurred during task execution:
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR] The following error was generated when "$error.Clear();
Start-SetupProcess -Name "iisreset" -Args "/noforce /timeout:120"
" was run: "Process execution failed with exit code 1062.".
[10-08-2014 21:55:31.0640] [1] [ERROR] Process execution failed with exit code 1062.
[10-08-2014 21:55:31.0640] [1] [ERROR-REFERENCE] Id=ClientAccessServiceControl___ef7fa14362774cd9af8882d6287b640a Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[10-08-2014 21:55:31.0640] [1] Setup is stopping now because of one or more critical errors.
[10-08-2014 21:55:31.0640] [1] Finished executing component tasks.
[10-08-2014 21:55:31.0672] [1] Ending processing Install-ClientAccessRole
Anyone has any ideas?

SBS 2008 Standard - Windows Backup fails first time after every reboot

Backup runs successfully every night.
Once server is rebooted first backup fails, then subsequent backups succeed OK.
So much so that we run the backup manually and let it error (pretty much straight away) then let it run again successfully at 10pm.
Backs up to external hard drive on rotation.
I think it's a VSS issue - has anyone else had this? What did you do to resolve?
Thanks,
J.

Hi,
According to the Event ID 521, please refer to the following article. you will get detailed explains.
Event ID 521 — Backup Operations
http://technet.microsoft.com/en-us/library/cc734453(v=WS.10).aspx
Based on all error messages that you provided, it seems that backup issue caused by sqlwriter.exe. So, please
temporarily disable SQL Server related services and then check if this issue can be solved. It will help us to confirm if this issue was related to SQL Server.
Meanwhile, would you please let me know if you have installed available update rollup for your SBS 2008 Standard?
Hope this helps.
Best regards,
Justin Gu

SCOM 2012 SP1 : Update rollup installation failed

Hello,
I'm trying to update SCOM 2012 SP1 with UR7 but the installation rollback automatically.
Same error with others UR.
LOG MSP :
MSI (c) (08:1C) [14:49:24:772]: Product: System Center Operations Manager 2012 Server - Update 'System Center 2012 - Operations Manager SP1 UR7 Update Patch' could not be installed. Error code 1603. Additional information is available in the log file c:\logs3.log.
MSI (c) (08:1C) [14:49:24:772]: Windows Installer installed an update. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.0.9538.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: System Center 2012 - Operations
Manager SP1 UR7 Update Patch. Installation success or error status: 1603.
MSI (c) (08:1C) [14:49:24:772]: Note: 1: 1729
MSI (c) (08:1C) [14:49:24:772]: Product: System Center Operations Manager 2012 Server -- Configuration failed.
MSI (c) (08:1C) [14:49:24:772]: Windows Installer reconfigured the product. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.0.9538.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error
status: 1603.
MSI (c) (08:1C) [14:49:24:772]: Attempting to delete file C:\Users\ADMINJ~1\AppData\Local\Temp\10c36d.msp
MSI (c) (08:1C) [14:49:24:772]: Unable to delete the file. LastError = 32
MSI (c) (08:1C) [14:49:24:772]: Grabbed execution mutex.
MSI (c) (08:1C) [14:49:24:772]: Cleaning up uninstalled install packages, if any exist
MSI (c) (08:1C) [14:49:24:772]: Attempting to delete file C:\Users\ADMINJ~1\AppData\Local\Temp\10c36d.msp
MSI (c) (08:1C) [14:49:24:772]: MainEngineThread is returning 1603
=== Verbose logging stopped: 15/10/2014 14:49:24 ===
MOMPerfCtrsInstall.log
The uninstall is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
The uninstall has completed.
The uninstall is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.EnterpriseManagement.HealthService.Modules.DataWarehouse.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.EnterpriseManagement.HealthService.Modules.DataWarehouse.InstallLog.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
The uninstall has completed.
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
An exception occurred during the Install phase.
System.FormatException: Input string was not in a correct format.
The Rollback phase of the installation is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\Microsoft.Mom.DatabaseWriteModules.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
Running a transacted installation.
Beginning the Install phase of the installation.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
An exception occurred during the Install phase.
System.FormatException: Input string was not in a correct format.
The Rollback phase of the installation is beginning.
See the contents of the log file for the D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.dll assembly's progress.
The file is located at D:\Program Files\System Center 2012\Operations Manager\Server\APMDOTNETAgent\Microsoft.EnterpriseManagement.OperationsManager.Apm.PerformanceCounters.InstallLog.
The Rollback phase completed successfully.
The transacted install has completed.
Maybe someone have a idea about that ?
Thank you !
Jérémy

Hi,
Have your tried to review the c:\logs3.log for any potential error or indication of cause?
For more information, please review the link below:
Update Rollup 7 for System Center 2012 Operations Manager Service Pack 1
http://support.microsoft.com/kb/2965420
Update rollup packages for System Center 2012 Operations Manager
http://support.microsoft.com/kb/2906925
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SBS 2008 Out of Office fails

SBS 2008 (i.e. contains Exchange 2007)
XP clients and Windows 7 clients are joined to the domain.
If client runs XP and uses Outlook 2003, Out-of-Office works correctly. If client uses any of Outlook 2007, 2010, or 2013 then Out-of-Office fails (regardless of whether client is XP or Windows 7). Error message is something like "cannot
contact server".
All Window 7 clients were able to set up the Outlook connection to Exchange simply by starting Outlook and accepting the prompt to set up the connection; no further intervention was required.
How do I debug this please?
TIA - Graham

Hi Graham,
Based on your description, please refer to the following operations and troubleshoot this issue.
Press the Ctrl key and right click the outlook icon, then select “Connection Status…”. When Outlook Connection Status appears, please check connection status.
Use the
Test E-mail AutoConfiguration tool in Outlook 2007 to test and then analyze the result. Meanwhile, For more details, please refer to the following FQA.
Troubleshooting
and Introduction for Exchange 2007/2010 AutoDiscover - Details about “Test E-mail AutoConfiguration”
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu

Created a package with packager for updates and install failed

Brand new iMac with CC2014 installed. Created a package of just updates. When running the update package, installation failed. Any ideas anyone?

Moving the discussion to Enterprise Deployment for Creative Cloud, Creative Suite,
Thanks,
Atul Saini

SBS 2011 - Update Rollup 6 for Exchange Server 2010 Service Pack 2

I wonder if I have to install this rollup, since the server is already up-to-date using Windows Update? The KB article (http://support.microsoft.com/kb/2746164/en-us) doesn't mention that.
In this article, under 'Prerequisites' it says you have to "remove all interim updates". What updates are they?
Simon

Firstly, I will do an introduction of interim update.
An interim update is a fix that resolves a problem that is considered critical to the functioning of Exchange. It is built specially for a particular service pack and Rollup. This means internally there could be loads of interim updates for a particular fix.
If you have multiple problems on a server that requires interim builds, you cannot just add a second interim build. You can only install one interim update per server. You have to get a combined interim build that included both fixes. Currently MS supports
up to 3 fixes in a combined IU. The good news is that interim builds can be seen in Add/Remove in the control panel so you do not end up checking file versions.
See more details in the following link: http://blogs.technet.com/b/mlines/archive/2008/12/30/interim-updates.aspx
That is to say, the interim update is different from Exchange Rollups
You don't have to unstall anything to apply this Roll Up. Rollup Updates are always important and should be applied. If you are running SP2 for exchange 2010 and if their a rollup available to install for exchange , my suggestion woiuld be to install as it
will keep your exchange server upto date.

VS2013 Update 1 install failing: The form specified for the subject is not one supported or known by the specified trust provider.

Hi
I just tried to install VS2013 update 1 ("Run As Administrator") from the ISO image and the installation finishes with a lot of messages like these:
"JavaScript Tooling: The form specified for the subject is not one supported or known by the specified trust provider."
"Microsoft Visual Studio 2013 IntelliTrace core x86: The form specified for the subject is not one supported or known by the specified trust provider"
I have 19 of these messages.
I had a quick look at the log file and I see this block of messages repeated quite a lot (for different files, not just "PerfTools_CORE_x86.msi"):
[8C10:9AC4][2014-01-23T07:46:04]i338: Acquiring package: PerfTools_CORE_x86.msi, payload: PerfTools_CORE_x86.msi, copy from: C:\Users\<removed>\Downloads\Microsoft\VS2013.1\packages\PerfTools_CORE\x86\PerfTools_CORE_x86.msi
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\PerfTools_CORE_x86.msi
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed to verify signature of payload: PerfTools_CORE_x86.msi
[95A4:996C][2014-01-23T07:46:04]e310: Failed to verify payload: PerfTools_CORE_x86.msi at path: C:\ProgramData\Package Cache\.unverified\PerfTools_CORE_x86.msi, error: 0x800b0003. Deleting file.
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed to cache payload: PerfTools_CORE_x86.msi
[8C10:9AC4][2014-01-23T07:46:04]i000: MUX: Verify Failed. Retry acquiring, Retry Count: 1 of 3
[8C10:9AC4][2014-01-23T07:46:04]i000: MUX: Set Result: Return Code=-2146762749 (0x800B0003), Error Message=, Result Detail=, Vital=False, Package Action=Verify, Package Id=PerfTools_CORE_x86.msi
[8C10:9AC4][2014-01-23T07:46:04]e314: Failed to cache payload: PerfTools_CORE_x86.msi from working path: C:\Users\<removed>\AppData\Local\Temp\{2f6f0fc4-5f66-4635-a4d2-1dd8d9481c63}\PerfTools_CORE_x86.msi, error: 0x800b0003.
[8C10:9AC4][2014-01-23T07:46:04]e349: Application requested retry of payload: PerfTools_CORE_x86.msi, encountered error: 0x800b0003. Retrying...
[8C10:9AC4][2014-01-23T07:46:04]i338: Acquiring package: PerfTools_CORE_x86.msi, payload: PerfTools_CORE_x86.msi, copy from: C:\Users\<removed>\Downloads\Microsoft\VS2013.1\packages\PerfTools_CORE\x86\PerfTools_CORE_x86.msi
[8C10:9AC4][2014-01-23T07:46:04]i000: MUX: Reset Result
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed authenticode verification of payload: C:\ProgramData\Package Cache\.unverified\PerfTools_CORE_x86.msi
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed to verify signature of payload: PerfTools_CORE_x86.msi
[95A4:996C][2014-01-23T07:46:04]e310: Failed to verify payload: PerfTools_CORE_x86.msi at path: C:\ProgramData\Package Cache\.unverified\PerfTools_CORE_x86.msi, error: 0x800b0003. Deleting file.
[95A4:996C][2014-01-23T07:46:04]e000: Error 0x800b0003: Failed to cache payload: PerfTools_CORE_x86.msi
[8C10:9AC4][2014-01-23T07:46:04]i000: MUX: Verify Failed. Retry acquiring, Retry Count: 2 of 3
My Visual Studio still seems to load following the failed installation, but I'm not sure if anything is broken yet.
Does anyone have any idea what the problem is?
Thanks, Greg

Hi Greg,
Most of the same error as far as I see are due to corrupt installer. Please try use fciv.ext tool from this site:
http://support.microsoft.com/kb/841290/en-us
Then use sha-1 number to compare it with the one listed here:
http://www.microsoft.com/en-us/download/details.aspx?id=41650
SHA-1: 51403CAF8E5E9799ACF1F3A0DA0E46390CD2FB16
If it is not the same, you have to redownload your ISO, it is corrupt.
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Reader : update and install failed

hello,
I first had a notification to update my Reader (it worked perfectly).
The update failed because of bad drive letter.
(i have Win7 SP1 64 bits)
Then i tried to remove Reader from my computer (to do a new install later).
Windows fails to remove (bad drive letter).
Then i use the command subst H: "C:\"
The remove process is OK, Reader is no more on my computer.
I've restarted Windows and tried to install Reader again => same issue
Here is the error message (in French)
Erreur d'installation de Adobe Reader
Lecteur incorrect : H:\ correspondait à un dossier utilisateur. Le lecteur n'existe pas ou la connexion est impossible. Vous pouvez déconnecter le lecteur ou réaffecter la lettre de lecteur. Pour plus d'informations, consultez http://kb2.adobe.com/cps/404/kb404946.html
H:\ was a disk drive i have removed few monthes ago, and this drive was used only for pictures & videos, not for programs.
I tried again the command subst (for C:\ and C:\Windows), but i still get the error message
I tried the Microsoft FixIt program
Please, help !

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\ Shell Folders
=> 1entry for "My Pictures"
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\ User Shell Folders
=> 1 entry for "My Pictures"
I've just changed these 2 entries to E:\
Install successful !!!
Thanks a lot

Windows 2008 R2 ADCS install fails

Hello,
I am trying to install a Standalone Root CA on a Windows 2008 R2 machine. Each time I try to install the role it says installed with errors. The error is 0x80070422, I am only trying to install the CA and CA Web Enrollment roles.
I can get the CA to install without errors, but when I try to install the CA Web Enrollment role is when it fails. I have also tried to install the online responder by itself and it too failed with the 0x80070422 error. I have tried sfc /scannow
and chkdsk /r /f with no issues. I removed the anti-virus software and malware software to try and get this installed with no luck. Checking the logs the only error that pops when these roles are installed is the VSS, and right after there is a
VSS entry in the logs saying that the VSS is working, there are also VSS entries prior to this that show it is working. Anyone have a clue as to how to get this installed?
Michael R. Mastro II

Hi
Thanks For Choosing Microsoft Community
Need to more information :
Which AV program You were using Before (is it Symantec)
Perform the steps listed below and check.
a. Click Start, type Notepad in the
Start search box and hit Enter.
b. Copy the following text and paste into Notepad:
sc config wuauserv start= auto
sc config bits start= auto
sc config DcomLaunch start= auto
net stop wuauserv
net start wuauserv
net stop bits
net start bits
net start DcomLaunch
c. Save the file with .bat extension (for instance
repair.bat) on the desktop.
d. Right-click the .bat file and click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click
Continue.

Sun Update Connection install fails on Patch 119574-02

Just finished installing Solaris 10 (3/05) on my brand new Sun Blade 1500. I then downloaded the latest version of Sun Update Connection, but the installer fails as follows:
# ./installUpdateConnection
Adding patch 119574-02
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119574-02
Checking installed patches...
Verifying sufficient filesystem capacity (dry run method)...
Patch 119574-02 failed to install due to a failure produced by pkgadd.
See /var/sadm/patch/119574-02/log for details
Patchadd is terminating.The above log file reads as follow:
# cat /var/sadm/patch/119574-02/log
This appears to be an attempt to install the same architecture and
version of a package which is already installed. This installation
will attempt to overwrite this package.
/export/home/richard.cross/updateConnection/patches/119574-02/SUNWcsu/install/checkinstall: /export/home/richard.cross/updateConnection/patches/119574-02/SUNWcsu/install/checkinstall: cannot open
pkgadd: ERROR: checkinstall script did not complete successfully
Dryrun complete.
No changes were made to the system.Where have I gone wrong? I haven't done anything to my system between installing Solaris 10 and downloading SUC, so why is it complaining about an existing patch?

Solved it. Solution is to move all of the patches into /var/spool/pkg and run patchadd on each one in there (in the right order).

SQL 2008 Express Sp1 Install Fails

I've to install SQL Express 2008 Sp1 On many PC with XP Pro, Vista and other OS inside a specific domain with policies that I can't directly change.
On all that computers fails the installation.
The installation works fine until it try to start the service. At this point it fails but leave all the component installed.
When I try to uninstall, it give me an error.
The folder with all the log files is downloadable here: http://www.deltainformatica.com/public/logs.zip
Thank you for any useful help.
Riccardo

Hello,
SQL Server setup account requires some user rights as explained on the following article. Make sure domain policies are not in effect affecting those user rights:
http://support.microsoft.com/kb/2000257/en-us
Please read the following post about SQL Server failing to start after applying SP1:
http://blogs.msdn.com/b/sqlserverfaq/archive/2010/10/27/sql-server-2008-service-fails-to-start-after-applying-service-pack-1.aspx
Try to change SQL Server service account to local system and then try to start the service.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Security Update 2009-01 Fails to Install

Hey guys,
I've done some searching but haven't found anyone with any issues installing the Security Update 2009-01. Has anyone else had the install fail on them? My install.log shows:
Feb 25 11:41:00 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Starting installation:
Feb 25 11:41:00 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Preparing volume "Macintosh HD" for installation
Feb 25 11:41:00 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Configuring volume "Macintosh HD"
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Preparing disk for local booted install.
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Free space on "Macintosh HD": 165 GB (178036584448 bytes).
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Create temporary directory "/private/tmp/SecUpd2009-001.pkg.278LCZ2ao"
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Running install actions
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Processing SecUpd2009-001:
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Determining files to install
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: ./Applications/Utilities/X11.app installed to /Applications/Utilities/X11.app
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: ./Applications/Utilities/Podcast Capture.app installed to /Applications/Utilities/Podcast Capture.app
Feb 25 11:41:01 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: ./Applications/Preview.app installed to /Applications/Preview.app
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: It took 0.91 seconds to create the install plan for SecUpd2009-001.
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Removing obsolete languages
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: An exception was thrown from the install queue while running IFInstallElement. NSRangeException. * -[NSCFString substringFromIndex:]: Range or index out of bounds.
Feb 25 11:41:02 X /System/Library/CoreServices/Software Update.app/Contents/MacOS/Software Update[278]: Install failed: The Installer encountered an unknown error that failed the install. Contact the software manufacturer for assistance.
Should I be asking here? I'm not sure if I'm eligible to talk to a Apple representative directly.
Thanks all!

I figured it out. I had sym-linked my /System/Library/Frameworks/Python.framework/Versions/2.5 to the macports version of Python. Restoring this back to the original 2.5.1 version fixed the problem.
If anyone else is having issues installing this update, make sure you restore anything you've modified (listed here http://support.apple.com/kb/HT3438) to the stock versions.
Cheers.

Exchange 2010 SP3 Update Rollups

Hi All,
I have a question about installing Update Rollups for Exchange 2010 SP3. After some organizational changes I have to take care of windows updates and our WSUS server. During the last check I found out that there are:
Update Rollup 5,6,7 listed in WSUS for our Exchange which is (CAS, HUB, MB). I've checked also some information about installing Update Rollup but it's not very clear for me. i saw also a problems after installing Update Rollup 6 and also some info from
blogs.technet.com
The release contains fixes for customer reported issues and previously released security bulletins. Update Rollup 7 is
not considered a security release as it contains no new previously unreleased security bulletins. Customers running
any Service Pack 3 Update Rollup for Exchange Server 2010 can move to Update Rollup 7 directly.
So, what is the best way to do it?
- Decline old Update Rollups, Install all other security and critical updates from WSUS, reboot the server, install Update Rollup 7, reboot the server?
Thanks in advance

Hi kondio
Thank you for your question.
Service packs and update rollups are part of the servicing strategy for Exchange 2010. They provide an effective and easy-to-use method to distribute Exchange 2010 fixes and modifications. We recommend that you install the latest service pack and update
rollup to keep the product up-to-date.
I suggest you update manually instead of WSUS.
You can refer to the following link to read about RU:
http://technet.microsoft.com/en-us/library/ff637981(v=exchg.141).aspx
If there are any questions, please let me know.
Best Regard,
Jim

Database update failed for some organizations when installing Update Rollup 1 for Microsoft Dynamics CRM 2013 Service Pack 1

Hi,
We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
Does anyone know how to fix this problem?
09:10:41| Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115. Continuing with other orgs. Exception: System.ArgumentNullException: Value cannot be null.
Parameter name: type
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type)
at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

Hi,
We get the following error in the logfile when we try to install the latest update for CRM: (KB2953252)
Does anyone know how to fix this problem?
09:10:41| Info| Database update install failed for orgId = 35e7ca08-43fb-4440-ba18-acfc3f42e115. Continuing with other orgs. Exception: System.ArgumentNullException: Value cannot be null.
Parameter name: type
at System.Activator.CreateInstance(Type type, Boolean nonPublic)
at System.Activator.CreateInstance(Type type)
at Microsoft.Crm.Setup.Database.DllMethodAction.Execute(Guid organizationId)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.ExecuteReleases(ReleaseInfo releaseInfo, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.Install(Int32 languageCode, String configurationFilePath, Boolean upgradeDatabase, Boolean isInstall)
at Microsoft.Crm.Setup.Database.DatabaseInstaller.InstallUpdate(String configurationFilePath, Boolean upgradeDatabase)
at Microsoft.Crm.Setup.Common.Update.DBUpdateDatabaseInstaller.OrgInstall(ArrayList orgIdArray)

SBS 2008 Update Rollup 3 install fails

Similar Messages

Maybe you are looking for