SBS 2011 DNS Resolution Slow
I have a customer running SBS2011 Standard. We've had problems with slow DNS resolute for a very long time. When users on their workstations go to a web site in IE, it usually takes a couple of seconds to load the site. The best example
of the problem is on Yahoo!. When users click a link there, IE will spin for a while and then time out. If they click on the link again, it usually loads the second time.
We recently switched internet providers and I was hoping that might resolve the issue, but it has not. The server is up-to-date as of a month or so ago and I've run BPA and the only issue there is with WSUS Group Policy objects, which I don't care
about. I wouldn't think this would be related to that. There are no errors in the DNS logs. This server was originally a clean install of a new domain, not a migration.
I have Forwarders configured and have tried using the DNS servers of the old ISP, the new ISP and OpenDNS. No improvement with any of those changes. On the Monitoring tab of the DNS server properites, "A simple query against this DNS server"
and "A recursive query to other DNS server" both fail every time. If I get rid of the Forwarders, those queries still fail and DNS resolute at the clients is still slow.
I know there was a DNS issue that was reported by the BPA a while ago and I fixed that. I think it was a registry setting that needed to be adjusted, but I can't recall the details right now.
I ran DCDIAG last night and was receiving messages about running Chkdsk to fix errors. I was hopeful that that would fix something, but I'm no longer getting that message. Now, the only errors in DCDIAG are SystemLog errors about not being able
to contact a machine that has been off the network for a while.
Restarting the server or just the DNS server has never helped.
My server has a PTR record in the reverse lookup zone and a static A record in the Forward Lookup Zone.
When I run NSLookup, it only responds with
Default Server: UnKnown
Address: fe80::9fcf:d19d:a86e:46cd
On another SBS server that I have, it has all of this information:
x.x.2.0.3.x.8.6.x.x.x.2.0.d.f.d.0.0.0.0.0.0.0.0.0.0.0.0.0.8.x.x.ip6.arpa
primary name server = localhost
responsible mail addr = nobody.invalid
serial = 1
refresh = 600 (10 mins)
retry = 1200 (20 mins)
expire = 604800 (7 days)
default TTL = 10800 (3 hours)
Default Server: UnKnown
Address: fe80::dfd0:2dca:68f3:2cf
Is that a helpful clue? Where do I start with troubleshooting and/or checking settings?
Any help would be appreciated.
Thank,
Mike
I would certainly change the router, just to rule it out.
Have you run the SBS BPA and fixed any issues it highlights?
If pointing a client directly to an external DNS, improves, but does not fully resolve, i would be inclined to say the Server is 'ok' and that it may be the router at fault.
It has been too long since i looked at a ProSafe router, but there may well be some firewall settings you can tweak.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+
Similar Messages
-
Primary DNS resolution slow if PDC role DC is down
Hello,
In my environment I'm running purely Windows Server 2012 in a two site environment. I run a single domain infrastructure with my main site that has 2 domain controllers (one has all FSMO roles), and a second site which has a single domain controller.
I've been looking all over the forums for a related topic, but haven't read something anything that fits my scenario. Basically what happens is, if the DC that has FSMO roles (specifically PDC) goes offline, or if I were to turn the DNS service
off, all devices would take forever for DNS resolution. Another scenario (which is essentially the same) is if the VPN tunnel between the two sites goes down, all clients at site 2 would take awhile for DNS resolution. If those clients launch their
browser any website they go to takes 5-10 seconds to load. They could reboot their PC, and do ipconfig /flushdns, and even though those clients DNS settings point to the DC at site 2 as primary DNS, it takes awhile. As soon as the PDC server is
restored everything is back to normal. Quite frequently the VPN tunnel will go down leaving very slow responses at site 2. Oddly enough is, if the tunnel were to go down, and I logged into the DC at site 2, if I were to ping various domains the
response would take 5 or so seconds. Is this normal to occur? If not, how could I possibly remedy this? My assumption is that, if the primary DNS were to go down, or in this case the PDC server goes down, one of the secondary servers would
kick in. I appreciate any light you can shed on this issue.
KenI agree with Meinolf. It's not always the DNS or PDC or whatever DC is in question's, fault. A lot of it is due to the client side resolver algorithm. Here's more specifics on how the whole process works - and note that this applies to all operating systems,
Windows, Linux, Unix, BEOS..... because they all follow the RFCs defining how client side resolvers work.
This blog discusses:
WINS NetBIOS, Browser Service, Disabling NetBIOS, & Direct Hosted SMB (DirectSMB). Troubleshooting the browser service.
Client side resolution process chart.
The DNS Client Side Resolver algorithm.
If one DC or DNS goes down, does a client logon to another DC or use the other DNS server in the NIC?
DNS Forwarders Algorithm and multiple DNS addresses (if you've configured more than one forwarders or more than one IP in the NIC's DNS list)
Client side resolution process chart
Published by Ace Fekay, MCT, MVP DS on Nov 29, 2009 at 10:28 PM 1764 1
http://msmvps.com/blogs/acefekay/archive/2009/11/29/dns-wins-netbios-amp-the-client-side-resolver-browser-service-disabling-netbios-direct-hosted-smb-directsmb-if-one-dc-is-down-does-a-client-logon-to-another-dc-and-dns-forwarders-algorithm.aspx
DNS Clients and Timeouts (Part 1 & Part 2), karammasri [MSFT] Dec 2011 6:18 AM
http://blogs.technet.com/b/stdqry/archive/2011/12/02/dns-clients-and-timeouts-part-1.aspx
http://blogs.technet.com/b/stdqry/archive/2011/12/15/dns-clients-and-timeouts-part-2.aspx
DOMAIN NAMES - CONCEPTS AND FACILITIES - Dicusses local resolvers.
http://tools.ietf.org/html/rfc882
=============
To add on how the client resolver picks a nameserver, below is a link to a discussion that points out the following - and please note, the operative point in the first bullet point indicates "equivalent," meaning that all DNS servers you enter into a NIC,
must all reference the same exact data, so you can't mix nameserver with different data and expect the client to try all of them.
•by RFC, all nameservers in a zone's delegation are equivalent
•they are indistinguishable to the client
•clients are allowed to choose the NS to query with whichever policy they wish
•if any picked server fails to respond (e.g. "ns3"), then the next server is picked among the remaining set (e.g. ns1 and ns2) according to the policy
•often clients use sophisticated policies that "score" servers and pick more often the ones that replied faster
•as a by-product, in practice this policy makes caches favor "nearest" servers
That was quoted from:
When is a secondary nameserver hit?
http://serverfault.com/questions/130608/when-is-a-secondary-nameserver-hit
===============
So you have to check when the first DNS goes down, not all directory enabled apps can handle it. opened.
Another issue is the client has bounded to the logon server during the DC Locator process. That's difficult to mess with other than restarting the machine...
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
Hyper-V Host Server 2012 R2 x64 drive c:
All VMs, including SBS 2011 Standard x64 are on drive d:
I replaced my motherboard and defined a Marvell RAID 1 Mirror for my boot drive C:. My drive D: containing all of my Hyper V machines remained untouched since the new MB had Intel Matrix Controller with RAID 5, as did the old MB.
Since the C: drives are a few bytes smaller after configured as a RAID 1, I was unable to restore drive C from the image copy, so I rebuilt a new Hyper-V Host identical as possible using Server 2012 R2 x64. I had to redefine the Hyper-V machines on
the host, and the 1st time I brought it all (host and VMs) I had to reconfigure the NICs due to new MAC addresses, and verifying SBS 2011 DNS and DHCP for all physical and Hyper-V machines. Otherwise my Hyper-V SBS 2011 x(64) wasn't touched.
Now the SBS Exchange 2010 is not receiving mail. In the Exchange Management Console clicking on the Organization config gives me a highlighted error "You don't have sufficient permissions to view this data". The Server
Config is no longer on the EMC. The Recipient Config looks fine.
Outlook 2013 x64 connects to the Exchange Server, but no new mail appeared. There were just a few older messages that came in since the last time I opened Outlook. My public DNS on GoDaddy was not changed. I did not change sending mail
through my ISP Sonic.net. The SBS internal DNS doesn't have an MX record, but I'm not sure it ever did since my GoDaddy public DNS has an MX record.
I tried restoring to an earlier Image Copy, but that made no difference. I'm using the Windows Backup from SBS 2011 for my daily image copy backups.
- Michael FaklisHi Michael,
à
After more research and running the Best Practices report from the EMC, I am missing a slew of ManagementRolesAndRoleGroups from the RBAC container.
Based on your description, it seems that you have find the cause of this issue. On current situation, I still
suggest that you should run
SBS 2011 BPA and then check if can find some relevant errors. Just for a confirmation.
Meanwhile, please refer to following articles and check if can help you.
Apply
missing Exchange 2010 RBAC Management Roles and Policies
RBAC Manager
(Exchange 2010 SP2)
Hope this helps.
Best regards,
Justin Gu -
Problems in a hosted Lync / SBS 2011 combination
Hi,
The problem
My client is using hosted Lync from Startready / lync4all in combination with their local SBS 2011 server -on premise Exchange Server-. Especially multipoint conferencing -some internal nodes / externals on PSTN, is going bad all the time with a Lync 2013 client
as well as a Lync 2010 client. At no specific intervals internal nodes have to rejoin. Gibberish / dropped calls from the outside to nodes on the inside are happening on a regular basis.
Our suspects for causes are:
1. SBS 2011 Bad DNS settings on the SBS 2011 server like no correct forwarding to external dns´s, I´ll have to check that though, but I observed long times to connect to shares and wrong forwarding entries are a documented cause for long connection times on
SBS 2011. I tried the Lync Pre-Call diagnostic tool on Lync (2010) as well as W7 and W8 non lync enabled nodes, all failed to connect which points to the SBS 2011 DNS as a cause.
2. No STUN / edge traversal settings on clients
3. No IGMP snooping settings, no flow control, no DiffServ implemented on either clients or the Netgear FS728TP smart switch
4. No documentation of specific Lync settings on the Cisco ASA 5505 appliance are available, it is unsure what the supplier of the network did there. I suspect, among other things, that a session timer is screwing conference connectivity with the Lync server
of Startready.
5. No effort was made to effectuate Lync related settings on clients through Active Directory.
6. Only 10/100 Ethernet connections to clients are available
7. On the Netgear switch, turning on Flow Control, IGMP snooping and LLDP did not prevent Lync conference calls from being dropped.
Note: I tested the connection with the Lync servers of Startready more then ten times with and without many people using the network and Voice conversations. The connection to the Lync Servers is as flawless as a WAN connection can be. Response times average
at 11 ms with no packet loss at all, measured from an internal network endpoint. This excludes the Lync Servers of Startready as a cause and lets be fair, thousands of Startready customers are using this service every day without a glitch!
Any help with effectuating setting on clients through Active Diredtory methods is also welcome
Kind regards,
Tony ThijsFrom my conclusion it should be a networ related issue.
Most Impact has the firewall, if statefull inspection is turned on for Lync traffic.
https 443 and stun 3478 will be use for the traffic to Lync online.
You can also check your Configuration with this website
http://trippams.online.lync.com/
You May also download the Lync 2013 precall diagnostic to test your performance
http://technet.microsoft.com/en-us/library/dn451255.aspx
regards Holger Technical Specialist UC -
SBS 2011 no longer issues DHCP leases: DHCP, DNS, and AD Errors
Hi all. On early 8/13/2012 and into the morning, our UPS failed several times. The battery seems to be fine but the unit was shutting off power to the unit which means the (Windows SBS 2011 Standard) server shut off unexpectedly several times.I replaced
the UPS.
Now I'm trying to figure out what in the world this did to the server. It seems DHCP, DNS, and AD all have issues, as seen in the logs below. The client PC's are going offline one-by-one because the leases are expiring and it can't connect to the server
to renew. When trying to start the DHCP service, I get a 20013 error saying it cannot be started.
So I attempted to follow a kb article and repair the database but that didn't work because it seems the Jetpack utility is not in SBS 2011? And even at that, I'm thinking it may not even be a corrupted DHCP database due to the other errors in the event log.
This is a small office and I only know enough to be dangerous but usually I can just follow a kb to fix any issues. But there are so many errors, this one has me stumped.. Could any Server whizzes identify the big picture here?
Level Date and Time Source Event ID Task Category
Critical 8/13/2012 1:33:12 PM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 11:30:37 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 8:23:24 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 8:05:08 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 7:38:04 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 7:29:29 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 12:55:11 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 12:15:49 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Critical 8/13/2012 12:09:49 AM Microsoft-Windows-Kernel-Power 41 (63) The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:48:02 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/14/2012 2:23:37 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/14/2012 1:14:33 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/13/2012 8:06:12 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/13/2012 7:38:59 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/13/2012 12:16:52 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 5/31/2012 12:00:19 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 5/31/2012 11:14:20 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 4/18/2012 4:32:07 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 9/2/2011 2:14:09 AM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/30/2011 11:37:18 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Error 8/23/2011 1:52:28 PM ADWS 1202 ADWS Instance Events "This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Directory instance: NTDS
Directory instance LDAP port: 389
Directory instance SSL port: 636
Level Date and Time Source Event ID Task Category
Error 8/15/2012 8:23:17 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 2:45:22 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:46 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:38 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:17 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:48:02 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:27:04 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:22:27 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:57 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:35 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:52:07 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:48:46 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:28:39 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 4:47:56 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 3:41:50 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:53:42 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:26 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:08 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:23:24 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:16:13 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 1:14:33 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 1:33:58 PM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:48:37 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:45:31 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:41:43 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:39:43 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:31:22 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:24:08 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:06:12 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:38:47 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:30:14 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:55:59 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:16:52 AM Microsoft-Windows-DHCP-Server 1004 None "The DHCP service failed to initialize the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:52:46 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:52:38 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:52:17 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:48:02 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:27:04 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/15/2012 12:22:27 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 8:03:57 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 8:03:35 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 7:52:07 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 7:48:47 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 7:28:40 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 4:47:56 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 3:41:50 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:53:42 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:42:26 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:42:08 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:23:25 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 2:16:13 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/14/2012 1:14:33 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 1:33:59 PM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:48:37 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:45:33 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:41:43 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:39:43 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 11:31:23 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 8:24:09 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 8:06:13 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 7:38:48 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 12:55:59 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Error 8/13/2012 12:16:52 AM Microsoft-Windows-DHCP-Server 1008 None "The DHCP service is shutting down due to the following error:
The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""2A040000"" (Server IP Address The DHCP/BINL service is not authorized in the directory service domain ""%2"" (Server IP Address %1)
Level Date and Time Source Event ID Task Category
Error 8/15/2012 8:23:17 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 2:45:22 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:46 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:38 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:52:17 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:48:02 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:27:04 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/15/2012 12:22:27 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:57 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 8:03:35 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:52:07 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:48:47 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 7:28:40 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 4:47:56 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 3:41:50 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:53:42 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:26 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:42:08 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:23:25 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 2:16:13 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/14/2012 1:14:33 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 1:33:59 PM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:48:37 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:45:33 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:41:43 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:39:43 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 11:31:23 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:24:09 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 8:06:13 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:38:48 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 7:30:15 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:55:59 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Error 8/13/2012 12:16:52 AM Microsoft-Windows-DHCP-Server 1018 None "The DHCP service failed to restore the database. The following error occurred:
An error occurred while accessing the DHCP database. Look at the DHCP server event log for more information on this error.
Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:48:28 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/15/2012 12:22:55 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/14/2012 2:23:56 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/14/2012 1:15:00 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/13/2012 1:34:27 PM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/13/2012 11:31:55 AM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."
Error 8/13/2012 8:24:36 AM NtFrs 13552 None "The File Replication Service is unable to add this computer to the following replica set:
""DOMAIN SYSTEM VOLUME (SYSVOL SHARE)""
This could be caused by a number of problems such as:
-- an invalid root path,
-- a missing directory,
-- a missing disk volume,
-- a file system on the volume that does not support NTFS 5.0
The information below may help to resolve the problem:
Computer DNS name is ""SERVER2011.vhf.local""
Replica set member name is ""SERVER2011""
Replica set root path is ""c:\windows\sysvol\domain""
Replica staging directory path is ""c:\windows\sysvol\staging\domain""
Replica working directory path is ""c:\windows\ntfrs\jet""
Windows error status code is
FRS error status code is FrsErrorMismatchedJournalId
Other event log messages may also help determine the problem. Correct the problem and the service will attempt to restart replication automatically at a later time."Level Date and Time Source Event ID Task Category
Error 8/15/2012 12:48:28 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/15/2012 12:22:55 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/14/2012 2:23:56 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/14/2012 1:15:00 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/13/2012 1:34:27 PM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/13/2012 11:31:55 AM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Error 8/13/2012 8:24:36 AM NtFrs 13555 None "The File Replication Service is in an error state. Files will not replicate to or from one or all of the replica sets on this computer until the following recovery steps are performed:
Recovery Steps:
[1] The error state may clear itself if you stop and restart the FRS service. This can be done by performing the following in a command window:
net stop ntfrs
net start ntfrs
If this fails to clear up the problem then proceed as follows.
[2] For Active Directory Domain Services Domain Controllers that DO NOT host any DFS alternates or other replica sets with replication enabled:
If there is at least one other Domain Controller in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
If there are NO other Domain Controllers in this domain then restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and choose the Advanced option which marks the sysvols as primary.
If there are other Domain Controllers in this domain but ALL of them have this event log message then restore one of them as primary (data files from primary will replicate everywhere) and the others as non-authoritative.
[3] For Active Directory Domain Services Domain Controllers that host DFS alternates or other replica sets with replication enabled:
(3-a) If the Dfs alternates on this DC do not have any other replication partners then copy the data under that Dfs share to a safe location.
(3-b) If this server is the only Active Directory Domain Services Domain Controller for this domain then, before going to (3-c), make sure this server does not have any inbound or outbound connections to other servers that were formerly Domain Controllers for this domain but are now off the net (and will never be coming back online) or have been fresh installed without being demoted. To delete connections use the Sites and Services snapin and look for
Sites->NAME_OF_SITE->Servers->NAME_OF_SERVER->NTDS Settings->CONNECTIONS.
(3-c) Restore the ""system state"" of this DC from backup (using ntbackup or other backup-restore utility) and make it non-authoritative.
(3-d) Copy the data from step (3-a) above to the original location after the sysvol share is published.
[4] For other Windows servers:
(4-a) If any of the DFS alternates or other replica sets hosted by this server do not have any other replication partners then copy the data under its share or replica tree root to a safe location.
(4-b) net stop ntfrs
(4-c) rd /s /q c:\windows\ntfrs\jet
(4-d) net start ntfrs
(4-e) Copy the data from step (4-a) above to the original location after the service has initialized (5 minutes is a safe waiting time).
Note: If this error message is in the eventlog of all the members of a particular replica set then perform steps (4-a) and (4-e) above on only one of the members."
Level Date and Time Source Event ID Task Category
Error 8/15/2012 8:23:17 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 2:45:22 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:52:46 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:52:38 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:52:17 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:48:22 PM Service Control Manager 7024 None The SQL Server (SBSMONITORING) service terminated with service-specific error %%17058.
Error 8/15/2012 12:48:02 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:27:04 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/15/2012 12:25:19 PM Service Control Manager 7024 None The Windows Search service terminated with service-specific error %%-1073473535.
Error 8/15/2012 12:22:48 PM Service Control Manager 7024 None The SQL Server (SBSMONITORING) service terminated with service-specific error %%17058.
Error 8/15/2012 12:22:27 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 8:03:57 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 8:03:35 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 7:52:07 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 7:48:47 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 7:28:40 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 4:47:56 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 3:41:50 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:53:42 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:42:26 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:42:08 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:23:25 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 2:16:13 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/14/2012 1:14:33 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 1:33:59 PM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:48:37 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:45:33 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:41:43 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:39:43 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 11:31:23 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 8:24:09 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 8:06:13 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 7:38:48 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 12:55:59 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013.
Error 8/13/2012 12:16:52 AM Service Control Manager 7024 None The DHCP Server service terminated with service-specific error %%20013. -
Folks;
*I have Mac OS X Leopard 10.5.6 up to date and since few days, the DNS resolution is very slow, about 5 seconds to resolve names.*
*For example :*
# ping test.com
*(wait 5 seconds)*
PING test.com (205.178.152.103): 56 data bytes
*Of course it also happen in firefox and in all other internet applications. Each time I'm loading a web page, I have to wait 5 seconds...*
*If I try a few seconds later, it answer immediately, but a few minutes later, it take again 5 seconds to resolve the name.*
*I'm not sure, and maybe it's just a coincidence, but it came just after the installation of Adobe Photoshop 4.*
*I think about a virus or some mysterious mac os parameters ...*
*I try* dscacheutil -flushcache *with no effect.*
*My /etc/hosts is :*
nameserver 212.27.40.240
*I only have 1 dns server, and when I try :*
nslookup test.com 212.27.40.240
*It answer immediately :*
Server: 212.27.40.240
Address: 212.27.40.240#53
Non-authoritative answer:
Name: test.com
Address: 205.178.152.103
*I tried with many others DNS and also with a local DNS server (bind) with the same result.*
*The output of :*
# dscacheutil -statistics
Overall Statistics:
Average Call Time - 1.298089
Cache Hits - 1813
Cache Misses - 1888
Total External Calls - 2662
Statistics by procedure:
Procedure Cache Hits Cache Misses External Calls
getpwnam 151 15 166
getpwuid 842 34 876
getpwent 0 0 2
getgrnam 38 18 56
getgrgid 15 16 31
getgrent 0 0 2
getservbyname 7 5 7
getservent 0 0 6
getprotobyname 0 2 2
getfsent 0 0 14
getaddrinfo 0 0 1117
getnameinfo 53 189 242
gethostbyname 537 591 42
gethostbyaddr 16 71 87
gethostbymac 5 4 9
_flushcache 0 0 3
*As you can see, "Average Call Time" is very high, it should be 0.0xxxxx*
*ifconfig output :*
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:1b:63:96:ab:e1
media: autoselect status: inactive
supported media: autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 10baseT/UTP <full-duplex,flow-control> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback> 100baseTX <full-duplex,flow-control> 1000baseT <full-duplex> 1000baseT <full-duplex,hw-loopback> 1000baseT <full-duplex,flow-control> none
fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 4078
lladdr 00:1c:b3:ff:fe:86:88:46
media: autoselect <full-duplex> status: inactive
supported media: autoselect <full-duplex>
en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.0.10 netmask 0xffffff00 broadcast 192.168.0.255
ether 00:1b:63:ca:a9:93
media: autoselect status: active
supported media: autoselect
*dtruss output :*
# dtruss ping itt.com
SYSCALL(args) = return
ioctl(0x3, 0x80086804, 0xBFFFE488) = 0 0
close(0x3) = 0 0
__sysctl(0xBFFFE35C, 0x2, 0xBFFFE364) = 0 0
bsdthread_register(0x91CD1F30, 0x91D0A2A4, 0x1000) = 0 0
open_nocancel("/dev/urandom\0", 0x0, 0x0) = 3 0
read_nocancel(0x3, "\377~\360U\360\211\303\231l\2725\002\265\327\247\371N`#_\314.\323@\022u\323\34 6'\224\314\271\0", 0x20) = 32 0
close_nocancel(0x3) = 0 0
mmap(0x0, 0x3000, 0x3, 0x1002, 0x1000000, 0x100000000) = 0x1E000 0
mmap(0x0, 0x200000, 0x3, 0x1002, 0x7000000, 0x100000000) = 0x21000 0
munmap(0x21000, 0xDF000) = 0 0
munmap(0x200000, 0x21000) = 0 0
mmap(0x0, 0x3000, 0x3, 0x1002, 0x1000000, 0x100000000) = 0x21000 0
getpid(0x0, 0x3000, 0x3) = 1436 0
socket(0x2, 0x3, 0x1) = 3 0
getuid(0x2, 0x3, 0x1) = 0 0
setuid(0x0, 0x3, 0x1) = 0 0
getuid(0x0, 0x3, 0x1) = 0 0
getpid(0x0, 0x0, 0x0) = 1436 0
__sysctl(0xBFFFE678, 0x3, 0xBFFFFA98) = 0 0
issetugid(0xBFFFE678, 0x3, 0xBFFFFA98) = 0 0
__sysctl(0xBFFFE534, 0x2, 0xBFFFE4FC) = 0 0
__sysctl(0xBFFFE4FC, 0x2, 0xBFFFE57C) = 0 0
sharedregion_checknp(0xBFFFFA78, 0x2, 0xBFFFE57C) = 0 0
stat("/usr/lib/dtrace/libdtrace_dyld.dylib\0", 0xBFFFD6E8, 0xBFFFE57C) = 0 0
open("/usr/lib/dtrace/libdtrace_dyld.dylib\0", 0x0, 0x0) = 3 0
pread(0x3, "\312\376\272\276\0", 0x1000, 0x0) = 4096 0
pread(0x3, "\316\372\355\376\a\0", 0x1000, 0x9000) = 4096 0
mmap(0x19000, 0x1000, 0x5, 0x12, 0x3, 0x100000000) = 0x19000 0
mmap(0x1A000, 0x1000, 0x3, 0x12, 0x3, 0x100000000) = 0x1A000 0
mmap(0x1B000, 0x1000, 0x7, 0x12, 0x3, 0x100000000) = 0x1B000 0
mmap(0x1C000, 0x1900, 0x1, 0x12, 0x3, 0x100000000) = 0x1C000 0
fcntl(0x3, 0x2C, 0xFFFFFFFFBFFFBD54) = 0 0
close(0x3) = 0 0
stat("/usr/lib/libgcc_s.1.dylib\0", 0xBFFFD4E8, 0xFFFFFFFFBFFFBD54) = 0 0
stat("/usr/lib/libSystem.B.dylib\0", 0xBFFFD4E8, 0xFFFFFFFFBFFFBD54) = 0 0
stat("/usr/lib/system/libmathCommon.A.dylib\0", 0xBFFFD328, 0xFFFFFFFFBFFFBD54) = 0 0
open("/dev/dtracehelper\0", 0x2, 0xBFFFE504) = 3 0
PING itt.com (199.253.127.99): 56 data bytes
sigaction(0x2, 0xBFFEF6E0, 0x0) = 0 0
sigaction(0x1D, 0xBFFEF6E0, 0x0) = 0 0
sendto(0x3, 0x5234, 0x40) = 64 0
select(0x4, 0xBFFFF9DC, 0x0, 0x0, 0xBFFFFB30) = 1 0
recvmsg(0x3, 0xBFFFFAC4, 0x0) = 153 0
setsockopt(0x3, 0xFFFF, 0x400) = 0 0
setsockopt(0x3, 0xFFFF, 0x1002) = 0 0
setsockopt(0x3, 0xFFFF, 0x1001) = 0 0
fstat64(0x1, 0xBFFEEE64, 0x1001) = 0 0
ioctl(0x1, 0x4004667A, 0xBFFEEECC) = 0 0
mmap(0x0, 0x1000000, 0x3, 0x1002, 0x2000000, 0x0) = 0x200000 0
munmap(0x200000, 0x600000) = 0 0
munmap(0x1000000, 0x200000) = 0 0
write_nocancel(0x1, "PING itt.com (199.253.127.99): 56 data bytes\n\0", 0x2D) = 45 0
select(0x4, 0xBFFFF9DC, 0x0, 0x0, 0xBFFFFB30) = 0 0
sendto(0x3, 0x5234, 0x40) = 64 0
©select(0x4, 0xBFFFF9DC, 0x0, 0x0, 0xBFFFFB30) = 0 0
sendto(0x3, 0x5234, 0x40) = 64 0
select(0x4, 0xBFFFF9DC, 0x0, 0x0, 0xBFFFFB30) = 0 0
sendto(0x3, 0x5234, 0x40) = 64 0
^C
*tcpdump output (with # ping ita.fr) :*
# tcpdump -i en1
00:26:06.469246 IP 192.168.0.10.49985 > 192.168.2.1.domain: 64308+ A? ita.fr. (24)
00:26:06.486473 IP 43.242.3.202.dial.dyn.mana.pf.22369 > 192.168.0.10.42567: UDP, length 85
00:26:06.487552 IP 192.168.0.10.42567 > 43.242.3.202.dial.dyn.mana.pf.22369: UDP, length 35
00:26:07.277453 IP 192.168.0.10.49938 > 192.168.2.1.domain: 44176+ PTR? 43.242.3.202.in-addr.arpa. (43)
00:26:09.346380 IP 192.168.0.10.ntp > time4.euro.apple.com.ntp: NTPv4, Client, length 48
00:26:09.541593 IP time4.euro.apple.com.ntp > 192.168.0.10.ntp: NTPv4, Server, length 48
00:26:11.467716 IP 192.168.0.10.61034 > dns1.proxad.net.domain: 64308+ A? ita.fr. (24)
00:26:11.469940 arp who-has 192.168.0.10 tell 192.168.0.254
00:26:11.469996 arp reply 192.168.0.10 is-at 00:1b:63:ca:a9:93 (oui Unknown)
^C
*ps aux output :*
# ps aux
$USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND
root 15 4.2 0.0 599620 284 ?? Ss 10:27AM 0:23.20 /usr/sbin/update
fanzila 330 3.1 0.8 302188 16000 ?? R 12:06PM 0:41.58 /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal -psn0413797
fanzila 994 2.6 8.2 486288 172048 ?? S 11:33PM 5:53.31 /Applications/Firefox.app/Contents/MacOS/firefox-bin -psn01122578
_windowserver 54 2.5 4.6 405476 97200 ?? Ss 10:27AM 6:30.50 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphic s.framework/Resources/W
fanzila 1092 1.2 3.2 473732 66856 ?? S 11:52PM 0:34.00 /Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app/Contents/MacOS/Adobe Photoshop CS4 -psn012
root 33 1.1 0.2 78660 3796 ?? Ss 10:27AM 0:16.79 /usr/sbin/DirectoryService
fanzila 23 0.5 0.4 298916 8368 ?? Ss 10:27AM 0:14.18 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow console
fanzila 130 0.5 0.6 305176 13164 ?? S 10:38AM 0:17.71 /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer -psn053261
fanzila 1332 0.0 0.1 2926604 2376 ?? S 12:20AM 0:00.10 /Applications/CrossOver.app/Contents/SharedSupport/CrossOver/lib/../bin/wineloa der C:\windows\system32
fanzila 1328 0.0 0.1 79096 2432 ?? Ss 12:20AM 0:01.88 /Applications/CrossOver.app/Contents/SharedSupport/CrossOver/lib/../bin/wineser ver
fanzila 1322 0.0 0.2 2928312 5072 ?? S 12:20AM 0:00.33 /Applications/CrossOver.app/Contents/SharedSupport/CrossOver/bin/wineloader winewrapper.exe --workdir
fanzila 1321 0.0 0.1 217684 2364 ?? S 12:20AM 0:00.05 /Users/fanzila/Library/Caches/Cleanup At Startup/CrossOver CD Helper.app/Contents/MacOS/CrossOver CD H
fanzila 1317 0.0 0.2 78124 4940 ?? Ss 12:20AM 0:00.11 /usr/bin/perl -w /Applications/CrossOver.app/Contents/SharedSupport/CrossOver/bin/cxmenu --bottle winx
fanzila 1316 0.0 0.2 2928312 5072 ?? Ss 12:20AM 0:00.37 /Applications/CrossOver.app/Contents/SharedSupport/CrossOver/bin/wineloader winewrapper.exe --run -- /
fanzila 1313 0.0 0.1 227052 2960 ?? Ss 12:20AM 0:00.10 /usr/bin/quartz-wm
fanzila 1305 0.0 1.2 327344 25868 ?? S 12:20AM 0:01.48 /Applications/CrossOver.app/Contents/MacOS/CrossOver -psn01335622
fanzila 1304 0.0 0.1 225336 3004 ?? S 12:20AM 0:00.13 /Users/fanzila/Applications/CrossOver/DHO.app/Contents/MacOS/CrossOver Helper with Feedback -psn0133
fanzila 1097 0.0 0.2 91876 4644 ?? S 11:52PM 0:00.28 /System/Library/Services/AppleSpell.service/Contents/MacOS/AppleSpell -psn01212712
fanzila 1094 0.0 0.7 327036 15668 ?? S 11:52PM 0:14.38 /Applications/TextEdit.app/Contents/MacOS/TextEdit -psn01208615
fanzila 1093 0.0 0.1 76432 1540 ?? Ss 11:52PM 0:00.07 /Applications/Adobe Photoshop CS4/Adobe Photoshop CS4.app/Contents/Frameworks/AdobeCrashReporter.frame
fanzila 993 0.0 2.9 430152 60324 ?? U 11:33PM 0:20.24 /Applications/Path Finder.app/Contents/MacOS/Path Finder -psn01118481
fanzila 983 0.0 1.9 399876 39104 ?? S 11:32PM 0:19.28 /Applications/Skype.app/Contents/MacOS/Skype -psn01114384
fanzila 982 0.0 1.1 339696 22972 ?? U 11:32PM 0:09.25 /Applications/Adium.app/Contents/MacOS/Adium -psn01110287
fanzila 967 0.0 2.6 355348 53504 ?? S 11:32PM 0:08.98 /Applications/Mail.app/Contents/MacOS/Mail -psn01106190
fanzila 921 0.0 0.0 600252 944 s001 S+ 7:07PM 0:00.06 /bin/bash
fanzila 912 0.0 0.0 600252 756 s001 S 7:07PM 0:00.01 -bash
root 911 0.0 0.1 76592 1104 s001 Ss 7:07PM 0:00.03 login -pf fanzila
_mdnsresponder 646 0.0 0.1 77304 1164 ?? Ss 4:03PM 0:00.10 /usr/sbin/mDNSResponder -launchd
fanzila 635 0.0 0.0 601896 804 ?? S 4:02PM 0:01.19 /usr/local/bin/gpg-agent --launchd --use-standard-socket --write-env-file
root 596 0.0 0.0 600252 952 s000 S 3:55PM 0:00.43 /bin/bash
fanzila 341 0.0 0.0 600252 944 s000 S 12:06PM 0:00.07 /bin/bash
fanzila 332 0.0 0.0 600252 756 s000 S 12:06PM 0:00.02 -bash
root 331 0.0 0.1 76592 1104 s000 Ss 12:06PM 0:00.03 login -pf fanzila
fanzila 298 0.0 0.6 268748 12604 ?? U 11:54AM 0:00.91 /System/Library/CoreServices/Dock.app/Contents/Resources/DashboardClient.app/Co ntents/MacOS/DashboardC
fanzila 297 0.0 0.4 264760 8108 ?? S 11:54AM 0:00.51 /System/Library/CoreServices/Dock.app/Contents/Resources/DashboardClient.app/Co ntents/MacOS/DashboardC
fanzila 296 0.0 0.8 272252 16328 ?? S 11:54AM 0:01.51 /System/Library/CoreServices/Dock.app/Contents/Resources/DashboardClient.app/Co ntents/MacOS/DashboardC
fanzila 295 0.0 0.6 270808 12488 ?? S 11:54AM 0:01.51 /System/Library/CoreServices/Dock.app/Contents/Resources/DashboardClient.app/Co ntents/MacOS/DashboardC
fanzila 294 0.0 0.9 299344 17828 ?? S 11:54AM 0:03.26 /System/Library/CoreServices/Dock.app/Contents/Resources/DashboardClient.app/Co ntents/MacOS/DashboardC
nobody 156 0.0 0.0 76776 632 ?? Ss 10:38AM 0:00.01 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/Resources/u sbmuxd -launchd
fanzila 151 0.0 0.1 223464 2408 ?? S 10:38AM 0:00.12 /Applications/iTunes.app/Contents/Resources/iTunesHelper.app/Contents/MacOS/iTu nesHelper -psn0118813
fanzila 144 0.0 0.3 314696 7184 ?? S 10:38AM 0:03.93 /Library/PreferencePanes/Witch.prefPane/Contents/Resources/witchdaemon.app/Cont ents/MacOS/witchdaemon
fanzila 137 0.0 0.1 214952 2960 ?? S 10:38AM 0:00.22 /Library/Printers/hp/hpio/HPEventHandler.app/Contents/MacOS/HPEventHandler -psn069649
fanzila 129 0.0 0.6 279688 12996 ?? S 10:38AM 0:15.74 /System/Library/CoreServices/Dock.app/Contents/MacOS/Dock -psn049164
fanzila 128 0.0 0.3 136856 6420 ?? S 10:38AM 0:08.23 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer
fanzila 127 0.0 0.0 76504 536 ?? S 10:38AM 0:00.01 /usr/sbin/pboard
fanzila 126 0.0 0.1 220304 2248 ?? S 10:38AM 0:00.28 /usr/sbin/UserEventAgent -l Aqua
fanzila 125 0.0 0.2 225908 3964 ?? S 10:38AM 0:00.26 /System/Library/CoreServices/Spotlight.app/Contents/MacOS/Spotlight
fanzila 120 0.0 0.2 257568 3348 ?? S 10:38AM 0:00.17 /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent
fanzila 114 0.0 0.0 600820 560 ?? Ss 10:38AM 0:00.51 /sbin/launchd
root 108 0.0 0.2 79644 3304 ?? Ss 10:29AM 0:01.10 /usr/sbin/coreaudiod
root 95 0.0 0.1 77928 1388 ?? S 10:27AM 0:00.13 /Library/Printers/hp/hpio/HPIO Trap Monitor.app/Contents/MacOS/HPIO Trap Monitor
root 87 0.0 0.0 76572 732 ?? Ss 10:27AM 0:00.12 /Library/Frameworks/HPServicesInterface.framework/Runtime/hpusbmond
root 47 0.0 0.1 86716 1836 ?? Ss 10:27AM 0:00.16 /usr/sbin/blued
root 45 0.0 1.3 116160 27116 ?? Ss 10:27AM 0:05.43 /System/Library/CoreServices/coreservicesd
daemon 43 0.0 0.0 75356 808 ?? Ss 10:27AM 0:01.88 /usr/sbin/distnoted
root 40 0.0 0.1 75704 1500 ?? Ss 10:27AM 0:00.61 /usr/libexec/ApplicationFirewall/socketfilterfw
root 38 0.0 0.0 75388 672 ?? Ss 10:27AM 0:00.03 autofsd
root 35 0.0 0.1 77000 2080 ?? Ss 10:27AM 0:13.02 /usr/sbin/configd
root 32 0.0 0.1 75460 1104 ?? Ss 10:27AM 0:01.04 /usr/sbin/diskarbitrationd
root 29 0.0 0.0 75376 700 ?? Ss 10:27AM 0:00.01 /sbin/dynamic_pager -F /private/var/vm/swapfile
root 27 0.0 0.1 85768 1476 ?? Ss 10:27AM 0:01.70 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/
root 26 0.0 0.0 75896 600 ?? Ss 10:27AM 0:00.01 /usr/libexec/hidd
root 24 0.0 0.0 75448 644 ?? Ss 10:27AM 0:00.01 /usr/sbin/KernelEventAgent
root 21 0.0 2.9 259112 61136 ?? Ss 10:27AM 2:08.30 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Support/mds
root 19 0.0 0.1 77316 2248 ?? Ss 10:27AM 0:00.64 /usr/sbin/securityd -i
root 16 0.0 0.0 75372 640 ?? Ss 10:27AM 0:00.01 /sbin/SystemStarter
root 14 0.0 0.0 75900 824 ?? Ss 10:27AM 0:02.07 /usr/sbin/ntpd -c /private/etc/ntp-restrict.conf -n -g -p /var/run/ntpd.pid -f /var/db/ntp.drift
root 12 0.0 0.0 601332 464 ?? Ss 10:27AM 0:00.57 /usr/sbin/syslogd
root 11 0.0 0.0 600236 484 ?? Ss 10:27AM 0:00.69 /usr/sbin/notifyd
root 10 0.0 0.1 75968 1228 ?? Ss 10:27AM 0:00.86 /usr/libexec/kextd
root 1460 0.0 0.0 599788 452 s000 R+ 12:27AM 0:00.01 ps aux
root 1 0.0 0.0 600820 564 ?? Ss 10:27AM 0:00.50 /sbin/launchd
_spotlight 1453 0.0 0.1 89116 2000 ?? SNs 12:26AM 0:00.13 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdw
fanzila 1425 0.0 0.2 122524 3432 ?? SNs 12:21AM 0:00.24 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Versions/A/Support/mdw
fanzila 1365 0.0 0.3 2931372 6596 ?? Ss 12:21AM 0:00.36 /Applications/CrossOver.app/Contents/SharedSupport/CrossOver/lib/../bin/wineloa der C:\windows\system32
fanzila 1362 0.0 0.1 78948 1364 ?? S 12:21AM 0:00.11 /System/Library/Frameworks/CoreMIDIServer.framework/MIDIServer
*Many thanks for your help.*fanzila wrote:
Thanks for your help nerowolfe.
If I ping or put in browser any IP, it answer immediately. It's just the resolution.
Then the problem lies with your DNS, perhaps your ISP DNS are simply slow.
I use OpenDNS servers in my router and computer and have very little latency.
Here is their webpage
http://www.opendns.com/solutions/homenetwork/ -
Hi --
I have an SBS 2011 Standard SP1 box that continues to be a major annoyance because of how slow and unworkable it becomes. This server is running on dual four-way 3-GHz Xeon processors, 16 GB of RAM and several terabytes of SATA-3 disk space. It is intended
to support the needs of THREE users. Right now, it is working essentially as installed; except for the antivirus program, all it's running is software installed by the SBS installer itself. It's providing file and print and email services to three users on
eight devices (three deskside PCs running Windows 7 Pro, two laptops (one running Windows 7 Pro, one running Windows Vista Ultimate), and three PDAs (two WM 6.5, one iPhone). And it does it dismally (except for email on Outlook and pushed to the PDAs).
Response times on this server start out passable right after the machine is booted and go downhill from there. Opening server shares or starting a remote desktop session might be OK after the server reboots, but after it's been running for a while it becomes
virtually impossible to get the machine's attention. Trying to open an OWA or RWA session is an ordeal no one wants to tackle. It can take one to two minutes after the user enters the URL for the challenge page to be returned from the server. And after the
user logs in, it can take up to six minutes for the OWA or RWA landing page to be displayed. From that point, response times on these apps are awful for the duration of the session. We haven't even attempted to set up and use SharePoint on this server yet.
The server and all other devices have gigabit connections to the LAN, with a 6 Mb pipe to the Internet.
The longer the machine runs, the more resource-bound it becomes. On Friday night, with none of the PCs logged in and no one logged in remotely (i.e. the only activity was Exchange pushing email to the PDAs), the server was reporting from 47 to 56 percent
of CPU usage and a staggering 95% of physical memory in use, claiming to have just shy of 600 MB of RAM unused. 45 minutes after I rebooted the server, those numbers dropped to 3% CPU usage and 3.9 GB of physical RAM in use. By Sunday afternoon -- in the middle
of a three-day weekend during which NO ONE logged into the system -- those numbers had risen to 35% CPU usage and 9.3 GB of physical RAM in use.
And I'm not quite sure I understand how these CPU usages are being reported, either. If I sort the process stack by CPU usage from highest to lowest, on many occasions the total CPU usage being reported does not match the individual CPU usage being reported
by the processes. And it's not a round-off problem, or a problem of one or two percentage points. One time I took a snapshot of the Task Manager window, and the sum of the nonzero CPU usages differed from the displayed total by 21 points.
About the only component that's working well on this server is Exchange. Whether on the internal PCs running Outlook through TCP/IP, the laptops connecting -- from anywhere -- via Outlook Anywhere, or the PDAs, mail comes and goes smoothly and promptly.
Mail arriving into Outlook hits the PDA an instant later. A reply from the PDA is readily available in Outlook's Sent Items folder. Contact and Calendar updates immediately propagate to all pertinent devices. Just don't try to use OWA ...
This server replaced an SBS 2003 SP2 box running on dual 1-GHz P3 processors, 2 GB of RAM and ATA-133 hard drives. That server also ran software that has not yet been installed on the new box, including the full installation of the Symantec Endpoint Protection
Small Business suite v11 (with the SEP server component managing the PCs). The new server is only running the SEP v12 unmanaged client; I have not dared burden it with any additional software. The old server dramatically outperformed this new platform. And
the old server also acted as the network's firewall and access control device, so it was doing more work than this new machine is doing here now ...
I have looked high and low for an explanation for this and have not gotten anywhere. Every piece of hardware has been rigorously tested several times; none has shown any problem. To the best of my knowledge, all programs, drivers, and firmware are at the
latest available revs and are all compatible with Server 2008 and/or SBS 2011. The server has three HP network printers installed. It has updated drivers and management software for the RAID controller, which we downloaded from the Intel site. It's running
SEP 12.1.1000.157 RU1 (unmanaged client only). Everything else it's running is right off of the SBS 2011 installation media (plus every available update from WU).
I've found one KB article that references the slow OWA and RWA issue (#2493361). Its solution is to install SP1 -- which this server already has.
I need to fix this ... What is wrong with this installation?
Thanks
CLThere is no third-party software other than the SEP package. We were having these issues before I installed the SEP client. I installed the SEP client only (not the full-blown package, v. 12.1.1000.157 RU1) after almost two weeks of running the machine with
no antivirus protection at all, which was making me uneasy.
And we've run the full SEP package on older SBS machines without issue. On the SBS 2011 box, we have the latest available version. All I've found that might implicate the antivirus program and explain what's happening on the machine is a reference to problems
with TDI drivers, but the solution it presented was to install SP1. The article did say to install Windows Server 2008 R2 SP1, but the link to the SP1 page says to install it though Windows Update. Since this server is showing that it is running SBS 2011 Standard
SP1, and there are no outstanding patches or fixes to install, I'm assuming that the necessary patches are already installed. But again, we've had these problems with this server even before I installed any antivirus program.
The only other "third-party" software is the IASTOR driver and support programs for the Intel RAID controller. The original driver came from the SBS installation media. As part of the troubleshooting efforts to try to resolve the problems with this server,
I installed an updated IASTOR driver and application that I downloaded from the Intel site (v. 10.0.0.1046).
The three HP printer drivers all came either from the SBS installation media or from Windows Update.
The latest chipset and motherboard support drivers were downloaded from the Intel site. This included an updated graphics driver for the on-board graphics chip that came with the download package.
And that's it. This server has no specialized hardware. The only "extra" hardware is an external eSATA WD drive used for backups.
The server had multiple Intel gigabit NICs, but all but one were disabled since SBS 2011 only requires (and apparently can only work with) one NIC.
I haven't even installed Office on this server ...
CL -
SBS 2011 extremely slow performance
Hi,
Over the past few months we have been having VERY slow file and exchange access with our SBS 2011 Standard.
Specs are: HP Proliant ML330G6 / 32GB Ram / Intel Xeon E5506 @ 2.13Ghz / Fully up to date with SP1
Around 40 users.
Originally we thought it may have been networking issues as the server performance itself was not so bad so we replaced the network with.
2x HP Procurve 1410 Switches
Sonicwall TZ200
Now server use both remotely and physically is slow. This morning it took about 15 minutes just to get past the login screen and load the SBS console.
Exchange management console can take up to 10 minutes to load.
User's are experiencing major delays on saving files. (E.G Powerpoint can take up to 2 minutes to save a 2MB file)
Outlook for all user's constantly becomes not responding and/or crashes with emails sometimes in outbox for 5 minutes before sending. Webmail is is slow internally it is not useable.
Have ran BPA etc. spent countless days going through technet and general google articles.
Not winning at the moment and need some ideas.Hi,
is the machine also slow, if you login locally and try to copy stuff around on the local disk?
If so, check the event logs for potential issues, also use resource monitor to find bottlenecks, memory leaks etc.
Other than that: The network card drivers should be kept up to date (not always the server maker offers the most current).
You may also check, if issues around Task Offloading or Receive Side Scaling affect the performance. To test this, you can run following commands to disable these features:
netsh int tcp set global rss=disabled
netsh int ip set global taskoffload=disabled
eventually also
netsh int tcp set global congestion=none
Check also the information in following links:
http://support.microsoft.com/kb/951037
http://msmvps.com/blogs/thenakedmvp/archive/2010/02/23/rss-tcp-offloading-strikes-again-microsoft-should-kill-this-feature-for-the-masses.aspx
Best greetings from Germany
Olaf -
Slow DNS Resolution using Time Capsule
Hello,
I'm using a time capsule as my main internet router and wireless access point, and I've noticed a significant delay before web pages begin to download. In trying to troubleshoot this, I came across a very helpful utilitity called the Netalyzr from Berkley. Using this tool, I'm able to see that there is a significant delay in name lookups using the time capsule DNS proxy capability. There's not a lot of documentation on this, but it appears that instead of handing clients the designated DNS servers configured in DHCP, it hands out its own address to the clients as the DNS server and makes the DNS request to the configured servers. I've included the verbage from the Netalyzer tool below.
Your ISP's DNS resolver requires 2200 msec to conduct an external lookup. It takes 81 msec for your ISP's DNS resolver to lookup a name on our server.
This is particularly slow, and you may see significant performance degradation as a result.
As you can see, this causes almost a 2.5 second "pause" before the lookup is even returned. However, if I hard code the designated DNS servers into this client (Macbook air running Lion), I get the following result.
Your ISP's DNS resolver requires 110 msec to conduct an external lookup. It takes 81 msec for your ISP's DNS resolver to lookup a name on our server.
This is a significant improvement over the lookup using the proxy capabilities of the Time Capsule. This leads me to believe that the DNS "proxying" that the time capsule is doing is really slow.
I'm using opendns as my provider in both scenarios.
Is this a known issue, and if so, is there an existing fix or a planned fix for this?
Best,
EricFrankly I just don't believe those analysers.. not until I can prove it myself.
Do a very simple test..
Open terminal and ping a website you have never opened before.
You should do this from a PC or Mac on the network using ethernet. Just to keep crummy wireless responses out of it. And do it without internet activity going on.
Do it a second time, and it should be instantaneous now having the address resolved and held in the cache.
If you get a significant lag before the address is resolved to actual IP, there maybe something wrong. And the first test then would be to change the DNS server to your local ISP not opendns.. because the routing to opendns might also be an issue.
You can also test by removing the TC from the network..plug a computer directly to the modem and just browse.. compare that to speed with the TC. I know it isn't exactly scientific but a 2.5sec delay in dns resolution you will notice it. It is important to connect to stuff that is outside your normal pattern. Otherwise it should just be in the cache.
Otherwise it is unlikely to really exist. -
Problem: Slow Intranet Sites/Internal DNS Resolution for only AD Users
Hello,
We are experiencing a very odd problem.
Any and All Active Directory users are experiencing very slow intranet sites.
We are a school corporation, so this is affecting our Student Information System, as it is entirely web-based and locally hosted.
All of our Domain Controllers are Windows Server 2012 R2, with all the latest critical updates.
All client workstations are Windows 8.1 Professional.
The problem occurs with ALL web browsers (IE, Chrome, FF, etc)
All DNS queries respond in <1 ms (no matter whether we are logged in as AD User or local computer user).
If we login as local computer user, we have blazing fast intranet sites/DNS resolution.
If we login as AD user, everything crawls again... every click on the intranet site spins and says loading for up to 15 seconds.
If we add the the intranet site to the local computer HOST file, it is blazing fast, just as if we logged on as local computer user.
If we take it back out of the HOST file, it drags again.
I am totally stumped!
Any help is appreciated.
Thanks!Hi,
How are DNS settings configured?
If there are any public DNS IP addresses in Preferred or Alternate field, please remove them, then input these DNS entries in the Advanced section. We should only configure Domain Controllers’ IP addresses on Preferred
and Alternate DNS server section for domain-joined machines.
More information for you:
Active Directory’s Reliance on DNS, and using an ISP’s DNS address
http://blogs.msmvps.com/acefekay/2009/08/17/ad-and-its-reliance-on-dns/
Best Regards,
Amy -
Greetings Gang,
Have an RV082 v1.1 FW 1.3.98-tm that has been rock solid for a couple of years and is now, suddenly, experiencing dead crawl DNS resolution.
No changes in configuration prior to the behavior starting. Tried rebooting the unit, no changein behavior.
There's an internal DNS server that resolves internal resources, but everything else gets pushed to the RV082.
I've tried Comcast, Verizon and Google DNS servers at the router level, and the results are the same -- so that rules out the DNS servers themselves.
Change the DNS servers at the NIC level on a wrokstation, and resolution occurs quickly and reliably.
I'm looking to reset to Factory Default and reload the configuration and likely upgrade to FW 2.0.0.19-tm or 2.0.2.01-tm but I do see similar issues reported with those firmwares, and moreover, in a mixed Mac/PC environment.
Was wondering if anyone else has experienced these issues, could identify a root cause and resolution.
Thanks,
JorgeProbably just corruption, which can happen every so often. A couple of years in service rock-solid is really great.
I experienced similar problems with my rv016s when my ISP changed their backend carrier equipment. I was never able to fix the issue, so I had to reboot them every 8hrs.
I wouldn't upgrade unless you HAVE to. You'll more than likely run into other bugs that breaks your current configuration, even if it's just a site-to-site VPN (I've been there, done that).
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com -
A Global Catalog Server could not be located - All GC's are down SBS 2011
I have been searching through these forums and manage to find similar errors but am struggling to find an answer that applies to this me.
I seem to be having a number of issues with our SBS. I believe this was originally domain was previously on a SBS 2003 box before being moved to this SBS 2011 box last year, it has been running fine until yesterday. I cant see anything that has changed then
though.
Everything seems to point to DNS although I am struggling to pinpoint the actual cause. The most worrying is when I try to open something on the SBS such as AD sites and services.
the error is
Active Directory Domain Services - Naming information cannot be located because: The specified domain either does not exist or could not be contacted. Contact your system administrator to verify that your domain is properly configured and
is currently online.
Here is the IPconfig/all from the server
v
Host Name . . . . . . . . . . . . : SBS2012
Primary Dns Suffix . . . . . . . : Contosso.local
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Contosso.local
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82575EB Gigabit Network Connecti
on #2
Physical Address. . . . . . . . . : 00-1E-67-39-23-14
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8087:34f0:59f9:6a26%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.35.250(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.35.1
DHCPv6 IAID . . . . . . . . . . . : 301997671
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-39-46-22-00-1E-67-39-23-15
DNS Servers . . . . . . . . . . . : 192.168.35.250
NetBIOS over Tcpip. . . . . . . . : Enabled
PPP adapter RAS (Dial In) Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RAS (Dial In) Interface
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.35.24(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{6E06F030-7526-11D2-BAF4-00600815A4BD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{A23E95B8-B5C2-4D88-BDE9-E9F1C2DD3902}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
and here is the nltest
nltest /server:sbs2012 /dsgetdc:contosso.local
DC: \\SBS2012.contosso.local
Address: \\192.168.35.250
Dom Guid: c50b6df3-9d22-4c87-b2a7-adadc4fd5ec1
Dom Name: contosso.local
Forest Name: contosso.local
Dc Site Name: Default-First-Site-Name
Our Site Name: Default-First-Site-Name
Flags: PDC GC DS LDAP KDC TIMESERV GTIMESERV WRITABLE DNS_DC DNS_DOMAIN
DNS_FOREST CLOSE_SITE FULL_SECRET WS
The command completed successfully
As far as I can see everything so far looks ok (highly possible I am missing something) but when I run a DCDIAG it gets messy
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = SBS2012
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SBS2012
Starting test: Connectivity
......................... SBS2012 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SBS2012
Starting test: Advertising
Fatal Error:DsGetDcName (SBS2012) call failed, error 1355
The Locator could not find the server.
......................... SBS2012 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SBS2012 passed test FrsEvent
Starting test: DFSREvent
......................... SBS2012 passed test DFSREvent
Starting test: SysVolCheck
......................... SBS2012 passed test SysVolCheck
Starting test: KccEvent
......................... SBS2012 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SBS2012 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SBS2012 passed test MachineAccount
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=Contosso,DC=local
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=Contosso,DC=local
......................... SBS2012 failed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SBS2012\netlogon)
[SBS2012] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SBS2012 failed test NetLogons
Starting test: ObjectsReplicated
......................... SBS2012 passed test ObjectsReplicated
Starting test: Replications
[Replications Check,SBS2012] DsReplicaGetInfo(PENDING_OPS, NULL)
failed, error 0x2105 "Replication access was denied."
......................... SBS2012 failed test Replications
Starting test: RidManager
......................... SBS2012 passed test RidManager
Starting test: Services
Could not open NTDS Service on SBS2012, error 0x5
"Access is denied."
......................... SBS2012 failed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:27:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:32:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:37:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:42:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:47:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:52:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:09
Event String:
Driver EPSON WorkForce 645 Series required for printer EPSON WorkForce 645 Series is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:10
Event String:
Driver FX DocuCentre-IV C2270 PCL 6 required for printer scanner - 212 Manukau Rd Epsom is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:10
Event String:
Driver HP ePrint required for printer HP ePrint is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:11
Event String:
Driver PDF Complete Converter required for printer PDF Complete is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:14
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:57:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:02:33
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
A warning event occurred. EventID: 0x00002724
Time Generated: 07/12/2013 09:03:32
Event String:
This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
An error event occurred. EventID: 0x0000041A
Time Generated: 07/12/2013 09:03:33
Event String:
The DHCP/BINL service on the local machine encountered a network error. The error was: 0x 2.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:03:33
Event String:
The DHCP/BINL service on this computer is shutting down. See the previous event log messages for reasons.
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:45
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0x00000406
Time Generated: 07/12/2013 09:07:33
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
An error event occurred. EventID: 0x00000406
Time Generated: 07/12/2013 09:12:34
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
An error event occurred. EventID: 0xC00038D6
Time Generated: 07/12/2013 09:16:24
Event String:
The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:17:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:22:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
......................... SBS2012 failed test SystemLog
Starting test: VerifyReferences
......................... SBS2012 passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Contosso
Starting test: CheckSDRefDom
......................... Contosso passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Contosso passed test CrossRefValidation
Running enterprise tests on : Contosso.local
Starting test: LocatorCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... Contosso.local failed test LocatorCheck
Starting test: Intersite
......................... Contosso.local passed test Intersite
I found a few people who have had similar issues that was caused by the "netlogon" service being paused or stopped but in my case it is set to automatically start and is running.
I have also posted this to serverfault (cant post links yet serverfault.com/questions/522691/a-global-catalog-server-could-not-be-located-all-gcs-are-down) added as there may be info there that may help.
Thanks for taking the time to read this, hopefully someone out there has come across this before or can offer something in regards to the next steps I should take.Some troubleshooting ideas:
0. Check if the DCs can resolve each other using their DNSHostName. If not, this indicates some DNS misconfiguration
-- you need to fix that first.
1. Check if the both the DCs are pointing to the same DNS server (or DNS servers that are replica of each
other). Run: "ipconfig /all" and check its output. If not, correct the DNS client settings and run dcdiag after sometime.
2. Check if dynamic updates are "turned on" on the DNS server.
3. Try re-registering the DCs SRV records by either restarting netlogon service or by running the following
command:
nltest.exe /dsregdns -
Migrating from SBS 2011 to Windows Server 2012R2 Standard with 365
Im looking to move SBS 2011 to Server 2012R2 standard and with a 365 migration as well.
Im thinking
BPA for AD (health check)
Add the Server2012R2 as a DC
Ensure replication
Move DHCP
Change DNS
Now this is where I get lost, now Im lost to use either dirsync or add essentials service, I have gone for standard and 30 cals with the option as I have 28 users and the essentials service would make everything quite nice for remote access and backups
etc.... however I don't know whether to just use dirsync with password replication instead ?
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network and sync'ing people to the cloud ? So Should I use DirSync on a different server
instead to sync up to azure ?
Finally with 365 I have only ever done a migration involving an export of pst's from an exchange box and then on a new domain with new pc's and reimport the pst's on the user accounts in outlook.
However I have read when migrating to 365 was using exchange 2010 there was a application
to move everything across however you needed an ssl cert iirc ? so I dont know how it works now since the nice new dashboard upgrade (assuming the tool has been updated like dirsync)
along with the above how does AD now know where exahcnge if you use the migration app with an ssl cert and is it a case of still running the 365 config tool to configure each user to look at their mail in the
cloud ? Also is it a good idea to enable essentials from the start of the 2012r2 dc for replication top 365 or to use dirsync ?
then finally when replications is all good start transferring the FSMO roles over to the new DC and demote and remove the SBS server
I have seen (below) but i dont think it covers this scenario and I cant be the only person in this situation =\ ?
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard?forum=smallbusinessserver
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server?forum=smallbusinessserverHi,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
à
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network
and sync'ing people to the cloud?
I’m a little confused with the description. Did you mean that set up DC (Windows Server 2012 Standard) and
then install the Windows Server Essentials Experience role? If so, when you migrate, please refer to the article:
Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience
Regarding to migrate Exchange to Office 365, please refer to following articles.
Migrate
All Mailboxes to the Cloud with a Cutover Exchange Migration
Step-By-Step:
Migrating from Exchange 2007 to Office 365
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, there is an additional article that you can refer to:
Manage Office 365 in Windows Server Essentials. It may help us to understand Office 365 in Server Essentials clearly.
If anything I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu -
Server 2012R2 as secondary DC on SBS 2011 domain
I have a Server 2012 R2 core I am planning on using as my secondary DC on my domain. The primary DC is SBS 2011. Are there any issues with simply running dcpromo to add the 2012 machine as the secondary DC? Will any of the FSMO roles be moved from
SBS as a result of promoting the machine as a DC? After running dcpromo, will the 2012 box automatically replicate my AD and DNS? This is the first time I am doing this, so I need some help....Hi Brady Maguire,
On current situation, please refer to following article and check if can help you.
Debunking
Myths About Additional Domain Controllers In SBS Domains
Hope this helps.
Best regards,
Justin Gu -
Joining Windows 2012 Server to SBS 2011 Domain
Hi All,
I have been trying to get a new Windows 2012 Server to join a SBS 2011 domain. The error message I am getting is:
The following error occurred attempting to join the domain: xxxx. The specified domain does not exist or could not be contacted.
I have a bunch of other Windows 7/XP workstations that have joined successfully. I have also tried disabling TCP/IP v6 on the 2012 server and joining the domain with the netdom command. The SBS 2011 server is listed as the primary DNS server on the 2012
server.
What else can I try here?
Thanks,
DR.I am having the same issue has the OP. I have my DNS settings pointing to the sbs server that hosts the domain and DNS. I am receiving the same error.
Server 2012 R2 Standard
SBS 2011 Essentials
Jerry T
Maybe you are looking for
-
Hi, ever since my upgrade to OS X Lion, I've noticed that the usage of the SMTP server list in Mail 5 seems to have changed. In the past, said list contained ALL configured SMTP servers. When configuring e-mail accounts (e.g. MobileMe) you could spec
-
CSV upload and update table fields
Hi, Is there any way to update any field of the underlying table from HTMLDB while importing the CSV file?For e.g, if there are XYZ table have 200 ermployee where empno is primary key. Once we upload the data from CSV its fine.Now after 2 weeks i nee
-
Grouping by column in Internal table
Dear folks, I have an internal table and my aim is to group its contents (just like we have the GROUP BY statement in normal sql). How can we group the contents in an internal table?. any hint will be appreciated. Thanks Praveen
-
Profit Centre Validation to GL Accounts
Hi All, How can we search for PC's that are valid for a combination of company code and BL account. Is there a list which shows only the valid relationships? Many thanks, Russell
-
Mail - Exchange access via Proxy
Hello! I'm using Mac OS X 10.6.1. with Mail Version 4.1 (1076). Setting up the connection of an Exchange 2007 mail server in an intern network works great. Now I want to have access from outside/external. The Windows setup is via a proxy server. In M