SBS 2011 RWA "Connect" Button randomly stop working

I have an SBS 2011 Standard Server that recently has had problems with its RWA site.  Periodically, the "Connect" buttons on the RWA Page for workstations simply stops working.  You can not establish a remote desktop connection via the
site to workstation or server.  None of the workstations or servers registered is accessible.  When you click on the link, it does nothing and provides no error code.
To restore the feature, I have to restart the RD Gateway Service and Reset IIS.  Once the services are restarted the "connect" links work fine for anywhere from 12-48 hours before the next failure.   I have checked the event logs and
found no errors as to why the service stops, and when I restart RD Gateway, it still indicates its running.  After about every 3rd or 4th failure, you have to reboot the server to restore the service. 
Anyone seen this type of problem?  The server was fine and stable up until about 3 weeks ago?  Any help or insight would be appreciated.  Thanks.

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Similar Messages

  • My lock button randomly stopped working, what will apple do?

    If I bring it to the apple store, what will they do?

    We don't know what they will do. Make an appointment and take it in to find out.
    Genius Appointment

  • When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working, help!

    When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone.  This previously worked, but has randomly stopped working. help!

    I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
    Why are you posting in this forum about what occured with an independent service provider?  How is is at all relevant to Apple??  In fact, service by any person or business not authorized by Apple voids any waranty.

  • My iPad 2 home button has stopped working I have tried the swivel from landscape to portrait whilst holding the button, I have tried holding the off button then the home button and I was told I could create my own home button in the settings but I can't!

    My iPad 2 home button has stopped working all together, I have tried the swivel from landscape to portrait whilst holding the home button, I've tried pressing the off switch then pressing the home button, the other thing I was advised to do was create a home button in the settings under the accessibility option but I don't have the option I was advised to use under there! Help! It's really frustrating having to turn the device off everytim I want to switch apps and I really can't afford to send it away to be mended! Many thanks in advance

    The accessibilty setting that was mentioned is:
    * Enable AssistiveTouch
    Enable AssistiveTouch which floats a virtual button on-screen which can mimic all hardware buttons on the device:
    Settings>General>Accessibility>AssistiveTouch: turn ON
    *Note* If you power off the device using the AssistiveTouch panel (tap the on-screen AssistiveTouch button, Device>Lock Screen (tap and hold to power off)), you will NOT be able to power on the device *if your Sleep/Wake (power) button is not functioning*. You will need to connect the powered off device either to a PC's USB port or an external charger to power the device back on.

  • USB Ports Randomly Stop Working

    I have an HP Pavilion dv6 Notebook with Windows 7. All of the ports, 2 2.0 and 2 3.0 ports, began to randomly stop working. My mouse light would still light up, but the mouse wouldn't work. If I rebooted the entire laptop, all of the ports would come back on for a short period of time before they randomly shut off again. They will also come back on for a short period of time if I close the lid for a few seconds and reopen it. However, lately, the 3.0 ports have stopped working entirely and the 2.0 ports stopping is becoming more frequent.
    The first time I noticed this was when I was testing a micro usb cable (it has stopped charging and I was testing whether it was the cable or the wall adapter). I plugged the cable into one of the 2.0 ports and it gave me a USB surge warning. Other than that, I haven't received any notices. The drivers are up to date. I have uninstalld the root hubs multiple times. I have tried all kinds of Power plans for the laptop. Nothing works. The USB ports still stop working, and it's becoming increasingly more frustrating.

    Hello Abby_Renee,
    With the USB 3.0 port not working, and your 2.0 port working intermittently, I would suggest the following document Troubleshooting USB Connections (Windows 7) for troubleshooting.
    In this document there is a specific option for USB 3.0 ports stop working, which would be the best steps to follow for your 3.0 ports. Now for the 2.0 ports, I would suggest USB device not detected by Windows (no device name in device manager), or the other option is USB devices are detected by Windows but are not working properly. The last two options are dependant on the specific errors you are experiencing.
    Please let me know the outcome of the troubleshooting steps.
    Good Luck!
    I worked on behalf of HP

  • External Speakers Randomly Stop Working until I "Test" or Disable/Enable

    I'm using a HP Pavillion DV6 Notebook PC Running Windows 7 Professional 64-bit SP1.
    External speakers randomly stop working until I "test" or disable/enable them. Headphone/HDMI Audio Works.
    Background
    -Recently had to do a clean install of windows.
    -Went to the HP Drivers Website and downloaded all of the latest drivers.
    -I installed several other programs as well (Flash, Steam, Media Player, Browser)
    -The problem started
    Current Settings
    -My deafult device is "Speakers and Headphones: IDT High Definition Audio CODEC"
    -Enhancements are disabled
    -Bass and Treble are set to 4
    -Format is set to 16 bit, 48000 Hz (DVD Quality)
    -Allowing applications to take exclusive control of the device or not doesn't make a difference (but it's currently off)
    Troubleshooting
    -The audio works by plugging in headphones or using an HDMI device
    -The audio comes back if I go to my sound settings and hit "Test", or if I disable and re-enable the device
    Error Messages
    -Youtube starts the video for 3 seconds, restarts and sputters a bit, and then says that there was an error
    -My media player (MusicBee) gives me this message: "Unable to start playback (Error = BASS_ERROR_BUFLOST)"
    That's everything I can think of. Any ideas?

    Hi TheBigBoy,
    Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that you are having a frustrating time with the sound to your external speakers. Have you tried connecting the speakers to another computer to see if is a hardware issue with the speakers? Do the regular speakers work? What is your product number as there are several models in the dv6 series?
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Audio randomly stopped working

    The sound on my computer randomly stopped working yesterday. I think it happened when I installed wine, but I'm not sure...I use alsa and it worked before. I tried rebooting a few times and reinstalling alsa, which didn't help. I did unmute in alsamixer, so that should be ok. From lspci:
    00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
    I don't know what other information is necessary, so please tell me what other info would help figure out the problem. I don't see how wine would affect the audio as I had it installed before and the sound worked, I uninstalled for a while to attempt to get rid of left over menu items of uninstalled Windows programs which didnt work but thats not really a problem. I installed Wine again and I have problems this time. I've tried to get sound from my laptop speakers and headphones and through audacious and youtube, and nothing worked. I looked at the alsa page on the wiki, under https://wiki.archlinux.org/index.php/Al … on_Startup but that is only for people who have multiple sound cards, which I don't (as far as I know lol). Audio is fairly important for me (not vital but still... ) so please help. I probably didn't supply enough information, so tell me if there are any log files I should post or something. I looked through /var/log but didn't see any files looked like they would have something to do with sound/alsa. Thanks

    Tux the penguin wrote:
    oss kind of works, but not entirely. When I run osstest, I get this:
    Sound subsystem and version: OSS 4.2 (b 2004/201101052228) (0x00040100)
    Platform: Linux/x86_64 2.6.38-ARCH #1 SMP PREEMPT Fri May 13 09:24:47 CEST 2011
    *** Scanning sound adapter #-1 ***
    /dev/oss/oss_hdaudio0/pcm0 (audio engine 0): HD Audio play front
    - Performing audio playback test...
    <left> OK <right> OK <stereo> OK <measured srate 47989.00 Hz (-0.02%)>
    /dev/oss/oss_hdaudio0/pcm1 (audio engine 1): HD Audio play center/LFE
    - Performing audio playback test...
    <left> OK <right> OK <stereo> OK <measured srate 47991.00 Hz (-0.02%)>
    /dev/oss/oss_hdaudio0/spdout0 (audio engine 2): HD Audio play spdifout
    - Performing audio playback test...
    <left> OK <right> OK <stereo> OK <measured srate 47991.00 Hz (-0.02%)>
    /dev/oss/oss_hdaudio0/pcmin0 (audio engine 3): HD Audio rec mix
    - Skipping input only device
    /dev/oss/oss_hdaudio0/pcmin1 (audio engine 4): HD Audio rec mix
    - Skipping input only device
    *** All tests completed OK ***
    No errors, but only the first test, pcm0 worked. Everything else only gave silence. That didn't help really because audacious/youtube doesnt play either. So I guess it isn't alsa specifice, and therefore isn't wine's fault. (I think?)
    It is normal that you only get audio from "HD Audio play front" unless you have a 5.1 setup, so oss works as expected.

  • Why won't that apps that weren't built into my iPod randomly stop working?

    Why won't that apps that weren't built into my iPod randomly stop working?

    Try a reset:
    Hold the home and power buttons at the same time until the Apple boot logo appears.

  • The home/menu button has stopped working on my E52...

    The home/menu button has stopped working on my E52. Is there a way I can retreive the info on my phone and put it on the memory card or a pc?

    Hi EmmaBarham,
    Welcome to Nokia Discussions.
    Please connect your phone to Nokia Suite, once connected you'll be able to sync your phone's data to your PC.
    When you're done syncing the data, I would also advice making a back up via Tools>Back up. This way you can get your phone repaired and simply restore it back onto the phone via Tools > Restore in Nokia Suite once the phone has been fixed.
    You can find your nearest Nokia Care Point here. Let me know how you get on!
    Iris9290
    If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

  • My iPhone 5 won't charge properly, computer doesn't recognise it and the home button has stopped working completely, it hasn't been dropped or water damaged at all, any ideas?

    My Iphone 5 won't charge properly, computer won't recognise the device and also the home button has stopped working completely, it hasn't been dropped or suffered any water damage, anybody else had anything like this? and what are the solutions? thanks

    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.

  • I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working.  But Windows 7 recognizes the device and I can see my pictures.  Same thing happens when I try to put music onto the iPad.

    I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working.  But Windows 7 recognizes the device and I can see my pictures.  Same thing happens when I try to put music onto the iPad.

    When in iTunes on the computer,my our ipadmshould show under devices.
    Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
    Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
    If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
    Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up.

  • My home button has stopped working on my iPod touch 4th gen. Is there a way to fix it?

    My home button has stopped working all together!!!!! Any ideas how to fix??
    Many thanks.

    Try:
    http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
    fix for Home button
    iPhone Home Button Not Working or Unresponsive? Try This Fix
    - If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
    - If not under warranty Apple will exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    You can do it an an Apple store by:
    Apple Retail Store - Genius Bar
    or sent it in to Apple. See:
    Apple - Support - iPod - Service FAQ
    - There are third-party places like the following that will repair the Home button. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • My ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help

    my ipod touch 4th gen home button has stopped working i have taken of the screen and tried pushing the button underneath and still not working please help

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • Can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?

    I have same problem.
    However, I am unable to turn on Assistive Touch.
    At one time I was able to activate it, but it went away and now I cant reactivate.
    What is the solution?

  • My-space-bar-and-delte-button-have-stopped-working

    My-keyborad-spacebar-and-delete-button-have-stopped-working.Any-suggestions

    I don't suppose you have an external keyboard. If you do, test it. If not, try booting in safe mode (shift key down at startup.)

Maybe you are looking for

  • Microphone jack not working with IOS 7

    Hi, I don't know where to report to, I've been using IOS on my iPhone 4 and iPad 3 since yesterday and looks pretty great but I noticed that the microphone jack is not working to speak with siri or even answering to a call, please let me know if you

  • How can I establish additional reminder lists in ios7 on my mini?

    I Am unable to add lists to Reminders on my ipad mini using ios7.

  • Select tables filed name by using global variables

    Hi I try to redesign a BODI jobs for monthly statistics. At the moment, I have a job for every month because in the source system (MS Axapta) the source table have the following design: YEAR     JAN      FEB    MARCH ... 2010       100      231     2

  • Adding animations causes letters in Hebrew to be cut off

    Hello I'm using Keynote 6.0.1 (1486). By and large, the Hebrew is working very well. However, if I add animations to a presentation (just simple stuff like having bullet points appear one at a time), the final letter on each line gets cut off some ho

  • Trying to convert from .mts to .flv

    I'm trying out Flash Video Encoder for creating .flv files to add to my web site. My Canon HD HG10 creates .mts video files, which aren't being uploaded when I try to "Add" them. This format is not in the drop-down list. Any suggestions? Scott