SBS 2011 Update services shows unknown for Windows 7 64 bit pc added to network

Our company has SBS 2011 and I've added a Windows 7 64 bit pc to our network. Now the update service on the console says Unknown. What service needs to be started on the pc to communicate updates to the server?

Hi Diane,
How did we join the Windows 7 client to the network? How did we install the Windows 7 client?
At this moment, we can refer to the thread below to troubleshoot the issue.
Update Status\WSUS
http://social.technet.microsoft.com/Forums/en-US/788476f6-714e-48fc-aea1-cc1557115565/update-statuswsus?forum=smallbusinessserver
Besides, regarding how to join a PC to a Windows SBS 2011 Standard network, the following article can be referred to as reference.
Automatically connect client computers to the network
http://technet.microsoft.com/en-us/library/cc527497.aspx
If the issue persists, we can look at the following article to further troubleshoot.
Repair Windows Server Update Services
http://technet.microsoft.com/en-us/library/gg680316.aspx
Best regards,
Frank Shen

Similar Messages

Problem installing Service pack 1 for Windows Vista 32-bit from windows update

I have been trying to install Service Pack 1 for Windows Vista Home (32 bits) through Windows Update many times. The Update panel shows Windows Vista Service Pack 1 (KB936330) is available. I install the update, which by the way, just takes me few minutes curiouslly. The "update succesfully installed" message with the green circle checked on appears. But then, when I check my computer properties, the Service Pack 1 is not there and Windows Updated keeps showing again and again the update for Windows Vista Service Pack 1 (KB936330) is available and that needs to be installed. I don't know what else to do, can you help me please.

Hi:
Try downloading and installing the standalone SP1 file.
http://www.microsoft.com/en-us/download/details.aspx?id=30
If you get it to install that way, go straight to SP2 with the standalone download.
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=16468
Paul

Service pack 1 for windows vista home premium

Recently my computer had a virus. I had to do a complete system restore. Now that I have done this I am trying to install the service pack 1 for this operating system and I get to the third step and the progress bar hardly moves. I have let it run for
up to 8 hours and no progression. I tried to install the service pack 2 but it says I need 1 first. Need lots of help on this issue please. Windows update not catching that I need this.

Hi,
During the Windows Vista SP1 installation, this issue occurs when a third-party application holds open a file or locks a file that the Service Pack installation program
has to use. For example, a third-party antivirus or antispyware application may cause this problem. If you are running any third-party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection),
security or anti-virus programs (McAfee, Norton, etc.), I recommend temporarily disabling or shutting them down during the troubleshooting process. Please be sure to re-enable them once the process has completed.
I recommend running Reset Windows Update Tool and System Update Readiness Tool. System resources, such as file data, registry data, and even in-memory data, can develop
inconsistencies during the lifetime of the operating system. These inconsistencies can be caused by various hardware failures or software issues. In some cases, these inconsistencies can affect the Windows servicing store, and they can cause software updates
not to work. We can run Reset Windows Update Tool and System Update Readiness Tool to resolve these inconsistencies. When Reset Windows Update Tool and System Update Readiness Tool detects incorrect manifests, files, or registry data, it might replace the
incorrect data with a corrected version. Please follow the steps below.
Step 1: Run Reset Windows Update Tool and System Update Readiness Tool
1. Please download and run Reset Windows Update Tool from the link below:
http://go.microsoft.com/?linkid=9665683
2. Please download and run System Update Readiness Tool from the link below according to the System Type:
System Update Readiness Tool for Windows Vista 32-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=2889489c-ee87-4607-8aa5-812e8078ab27&DisplayLang=en
System Update Readiness Tool for Windows Vista 64-bit
http://www.microsoft.com/downloads/details.aspx?FamilyID=14f76773-007c-493f-bece-243bc21ac73d&DisplayLang=en
3. Restart the computer and install Windows Vista SP1. Let’s reinstall
SP1 standalone installer in Clean Boot.
For your reference, I have attached these steps as below:
Step 1: Download Windows Vista Service Pack 1 Standalone Installer
====================================================
1. Download Windows Vista SP1 from the link below according to the System Type:
Windows Vista Service Pack 1 for Windows Vista 32-bit (Size: 544.3MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=f559842a-9c9b-4579-b64a-09146a0ba746&DisplayLang=en
Windows Vista Service Pack 1 for Windows Vista 64-bit (Size: 873.0MB)
http://www.microsoft.com/downloads/details.aspx?FamilyID=86d267bd-dfcd-47cf-aa76-dc0626dcdf10&DisplayLang=en
2. Please save it on the Desktop.
Step 2: Install Windows Vista SP1 in Clean Boot Mode
=========================================
Please disable all startup items and third party services when booting to avoid conflict when installing
Vista SP1.:
1. Click "Start", type: MSCONFIG in the search box and press Enter.
Note: Please click "Continue" if the "User Account Control" window pops up.
2. Click "Services", check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
3. Click "Startup", click "Disable All", click "OK" and restart the computer.
Note: Temporarily disabling the Startup Group only prevents the startup programs from loading at startup. This shouldn't affect the system or other programs. We can manually run these programs later.
4. Please double click the downloaded Windows Vista Service Pack 1 Standalone Installer and follow the instructions to install Windows
Vista SP1.
To restore the computer to use a Normal Startup, repeat step 1 above. Then click "Normal Startup" on the General tab, click "OK", and then restart the computer.
Please take your time with the steps and let me know the results at your earliest convenience. If there are any questions or concerns, please post here for further
research.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Service Pack 2 for Windows 7

Service Pack 2 for Windows 7 were is it my updates only give me pack 1 . Its say windows is not bringing pack 2 out . I think thats realy nice of them to do this to there customers has pack 1 crashs most of my programs and i have to untick it every update
errr mmm thanks . Think ill get a Apple next . I carnt stand we have the power to do wot we wont just spend your money on us ( Micosoft ) should be Ripsoft :)

Hi ,
As Oberwald said, service packs are not designed to fix damaged Windows installations. Also, Microsoft haven’t released Windows 7 SP2 package yet. When it release, it will upload on Microsoft website. Let’s look forward together.
Regards,
Vincent Wang
TechNet Community Support

Can't install service pack 1 for Windows 7 64bits - ERROR_IO_DEVICE(0x8007045d)

Hello
everyone.
I can
not install
Service Pack
1
for Windows
7 64-bit version
I've tried
the Windows
Update, tried all the solutions in Micrososft help
(installed
Preparation Tool
for
Windows System Update
7
for x64-based Systems, disabled
anti-virus,
rebooted,
tried
again ....)
and nothing.
At
the end always gives
the error:
Unable to
perform the request due
to
an error
of I / O
device -
Details - Error:
ERROR_IO_DEVICE
(0x8007045D).
Can anyone
help me?
Thank you.

Hi,
Try to use Chkdsk tool to check if it could fix this issue:
1.
Type cmd in the Start Search box, right-click cmd.exe in the Programs list, and then click Run as administrator.
If you are prompted for an administrator password or for confirmation, type your password, or click Continue.
2.
At a command prompt, type the following command, and then press ENTER:
Chkdsk /R X:
In this command, X: is a placeholder that represents the drive letter of the volume that you want to check.
3.
Press Y when you are prompted to check the disk the next time that the system restarts.
4.
Close all applications, and then restart.
Meanwhile, please try to download Windows 7 SP1 package and then install it to check if this issue persists.
Windows 7 and Windows Server 2008 R2 Service Pack 1 (KB976932)
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the th
Thank you very much! It worked.

IPods and Service Pack 3 for Windows XP

If you have installed Service Pack 3 for Windows XP, an issue may arrise that will not allow iPods to function. You will get an error that the iPod Service Module has experienced an error and needs to close.
If you see this error, first check to see if you can see any of your devices in the Device Manager. To do this, click on Start, the right click on My Computer, then click on the Hardware tab, then click on the Device Manager button. If this window is blank, you will need to call Microsoft directly at 800-642-7676.
The reason that the Device Manager is now blank is that if you were running any Anti-Virus program while Service Pack 3 was being installed, there was a certain file that was prevented from running that was designed to clean up the registry after installation. Since this file did not execute, that is why your Device Manager is now blank and your iPod will not work.
A word of caution though. When you call Microsoft, do not tell them that the reason you are calling is that your iPod does not work due to Service Pack 3. If you say this, they will want to charge you $80.00 for tech support. On the other hand, if you say that you recently installed Service Pack 3 and have noticed that the Device Manager is now empty, you will now get the tech support for free.
I write this for any who might be experiencing this problem as Apple Tech Support has informed me that this is one of their biggest tech support issues in the past couple of months since Service Pack 3 was released.
Gr81isback

Still useful as of 12/30/11. Have ten Lenovo 5042 computers with downgrade licenses to run XP and have a ghosted image from another Lenovo 5042 having and Intel cpu. My target computers all have AMD cpus in them and the image would continuously reboot on
the AMD computers.
Used method 1 and it cleared the problem instantly, many thanks for the post and the time and effort it took to dig up the answer..

TS5376 iTunes update 11.1.4 for Windows: Unable to install or open. if 11.1.4 is uninstalled, will my library contents be lost?

iTunes update 11.1.4 for Windows: Unable to install or open. if 11.1.4 is uninstalled, will my library contents be lost?

You don't need to open iTunes to back up the library. See Troubleshooting issues with iTunes for Windows updates and look in the further information area for backup advice.
tt2

Re: Update the BT Stack for Windows by Toshiba - Satellite A300-1MS

How do I update the Bluetooth stack for windows by toshiba? Do I have to uninstall the previous one existing on my Satellite A300-1MS or I just install over it?

Hi
Usually you could install it over the old BT stack.
But if you would receive an notification that an old BT stack must be removed firstly, then remove it and then install the new one.
By the way:
This Toshiba BT portal is really useful and helpful. It contains a lot o FAQs which could be interesting for you.
http://aps2.toshiba-tro.de/bluetooth/
Greets

Since i updated to itunes 11 for windows 7 it doesn't open any more!!!!

Since i updated to itunes 11 for windows 7, 64 bits, the program dosen't open, I've allready reinstall the 10.7 version but it doesn't work neither any more, what can i do??? I've just repair it, reinstall it, download it from apple's web site but nothing works, please help!!

Thi solved my problem!!!
http://support.apple.com/kb/TS2363

Is there a way to change the Windows Update service startup type on Windows Server 2012 R2?

We have a number of newly built 2012 R2 servers that we have HP Operations Manager agent running on that monitors the status of several services and reports if they are "stopped". One of these services is Windows Update. Every day we
get at least one alert saying:
"Service "Windows Update" is not started. Current state is stopped"
Checking the event logs shows that the Windows Update service stops, then a while later it just starts again. Not an error, just an information event.
In Windows 2012 R2 the Windows Update service is set to "Automatic (Trigger Start)", where in previous versions we run (2012/2008R2) it would be set to just "Automatic" or "Automatic (Delayed Start)"
I have come to understand that this behaviour is normal for Windows 2012 R2, and that Trigger Start services by design stop themselves after a period of inactivity. I was unable to find any info on how this works. Our client would like this to
be changed and the Windows Update service stay running all the time, understanding that this impacts performance.
Is there a way to change the Windows Update service in Server 2012 R2 to the old Automatic startup behaviour so that it stays running all the time instead of stopping and starting periodicall? There is no option to do this via the services mmc
gui.
So far I have tried:
Removing the Triggers using the command: sc triggerinfo wuauserv delete
This works temporarily, the service then shows as just Automatic in the services console, however if you restart the server or restart the service it goes right back to being Automatic (Trigger Start).
Any kind of help would be appreciated.

This one might help.
Allow configuration of Automatic Updates in Windows 8 and Windows Server 2012
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Graphic card driver update doesn't work for Windows 8.1 upgrade (Ideapad Y500)

I upgraded my windows 8 to Windows 8.1 today and it probably is a huge mistake. After the upgrade my Ideapad Y500 started to look weird (Firefox stopped working). I searched around for solution and was told that I probably need to upgrade the driver to my graphic card. So I went to the driver download page and downloaded the NVIDIA GeForce GT750M Second VGA BIOS Update for Windows 8.1
I followed the instruction to run the "Winflash_Yx00s.bat" file, but after I seleted "yes" to let it modify the system, there is a very fast flashing a little black window (too fast for me to see what it is), and nothing happens afterwards. I checked to make sure that nothing is running in the background. After waited for half an hour I tried to restart the computer and still nothing happens. The display still looks weird.
Please help me!

when I read posts like yours I often do the test myself
so I went into skype both metro and desktop skype and to my horror like you I did not have the option only my logitech webcam was an option
I went into devices and see that ht had FaceTimeHD camera (Built-in) as malfunctioning not working devices there
I went to my bootcamp driver zip and ran the apple AppleCamera64.exe
but little did it help then I googled it
https://www.google.dk/search?q=bootcamp+facetime+hd+camera+driver&oq=bootcamp+fa cetime+hd+camera+&aqs=chrome.1.69i57j0.9286j0j8&sourceid=chrome&es_sm=93&ie=UTF- 8
came across this post at ms
http://answers.microsoft.com/en-us/windows/forum/windows_8-hardware/facetime-hd- camera/0ef43e8a-45bc-4797-99f7-c57848b9f2bb
did the uninstall of both of the unknown devices as suggested and ran a scan for new hardware and bam!
the camera was back in action
suppose looking like a gobling shark made it so I never noticed that win8.1 had broken my facetime cam before you brought it up

How to get Oracle Service Bus 10gR3 for windows 64 bit

Hi,
I'm looking for Oracle Service Bus 10gR3 and Oracle Data Service Integrator 10gR3 installables for Windows 64-bit. However, I saw the available versions on download section are only for indows 32-bit. I'm using win 64-bit to detect 4BG RAM or more which is not possible in win 32-bit.
Can anybody help me wheather compatable version are available or is there any solution for that?
Thanks in advance,
Ganesh

Hi Ow;
Please check:
Step-By-Step Install of RAC with OCFS on Windows 2003 [ID 178882.1]
WIN: Does Oracle Cluster File System (OCFS) Support Access from Mapped Drives? [ID 225550.1]
How To Check The Certification Matrix for Real Application Clusters [ID 184875.1]
Regard
Helios

Updated Adobe Content Viewer for Windows Store now available

The latest release of Adobe Content Viewer for Windows Store is now available for download. Note that depending on your location it could take up to 24 hours for the updated viewer to appear in the store. If you already have a previous version of the viewer installed Windows will auto-update the app for you within the next 24-48 hours. The new version displays 3.4.3.5 in the About pane.
This update includes the following new functionality:
Renditions
Pan and zoom overlay
For the complete list of supported features see our help topic on the Windows viewer. Enjoy, and don’t forget to leave feedback on the app in the store!
The Windows Store viewer team

Great
Creating tiles for Win app just now, i would appreciate some short handbook for designing of tiles with examples, i'm little bit lost now (where i should put text and so on).
Thanks!

Security Update 2007-001 patch for Windows

Hi, I am having no luck in finding the Security Update 2007-001 for Quicktime security patch for Windows XP.
Can someone please direct me to either the link to directly download the Windows version of the 2007-001 security patch, or a link to the Software Update tool in order to download this patch.

http://docs.info.apple.com/article.html?artnum=304989
If Software Update was not installed during your QuickTime Player install you'll need to uninstall it, re-install and include Software Update software.
Is that enough install?

Dreamweaver update 13.2.1 for Windows 8 (issues related to DPI scaling addressed)

The latest Dreamweaver update (13.2.1) is recommended for Windows 8 users. This fix allows Windows 8 users to use Dreamweaver on High Resolution monitors.
For Windows 7 users, there is no additional benefit from this update.
If you do not see the update listed in your Creative Cloud application, quit the application, and relaunch it.
This udpate addresses the following issues:
Dreamweaver UI rendered is too small to be usable
UI elements do not appear in the intended location
Some of the elements are not visible as they extend beyond their visible area
Note that the product team is still working on making Dreamweaver a HiDPI aware product.
Thanks,
Preran

Yes
Direct Download Links for All CC Updates: Windows

SBS 2011 Update services shows unknown for Windows 7 64 bit pc added to network

Similar Messages

Maybe you are looking for