SBS server hangs at shutdown while doing updates

My server hangs after doing a reboot.  The screen states "Operations are in progress please wait.  The machine will be turned off automatically are the operations are completed.
I had microsoft helped me once.  The technician access the server task manager from a workstation and shut down serveral services.  Does any one know how to do it. 
Please help this has been going on for nearly three hours now.  The server is fully accessible from a workstation.
Thank you,
bw
Bonnie Whalon

Hi Bonnie, if you have Acronis installed, you may take a look at the following link:
http://kb.acronis.com/content/19016
Please Note: The third-party products discussed here are manufactured by vendors independent of Microsoft. We make no warranty, implied or otherwise, regarding these products' performance or reliability.
Sean Zhu
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Sean Zhu
TechNet Community Support

Similar Messages

  • How to find out the info regarding Solaris, server hang or shutdown.

    Hi
    As I am handling the Solaris 9 Server remotely.
    As in last week the server has stopped to respond suddenly, we have tried to ping, ssh which was not working. As ultimately we have asked the Data Centre Team to hard reboot the same, to resolve the issue.
    In the same ref I would like to know how we come to know the reason, what caused to reboot the same, i.e . any log file, etc..
    I have check /var/adm/messages, but not found any detail for the same.
    Thanks
    Rajan
    I

    No core files?
    No hope for an answer.
    As you learned in the other Internet forum.
    http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-out-the-info-regarding-solaris-server-hang-or-shutdown.-621500/
    To get such corefiles analyzed,
    you would need to use your service contract and log a support case with Sun.
    They have the special software tools to do that.

  • Ipod has froze while doing update

    my ipod has froze while doing the recent update. Cannot turn on or off

    Reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not help, connect in recovery mode and restore, explained here:
    If you can't update or restore your iOS device

  • How to find out the column causing the error while doing update or insert

    I'm getting the below error when attempt to update or insert a long string that is more than its defined length in the DB2. For example in table the column length is defined as 50, however from UI the data for that column is more than 50 chars.
    {color:#ff0000}**Caused by: com.ibm.db2.jcc.b.SqlException: DB2 SQL error: SQLCODE: -302, SQLSTAT**
    **E: 22001, SQLERRMC: null**
    **at com.ibm.db2.jcc.b.hh.b(hh.java:1369)**
    **at com.ibm.db2.jcc.b.hh.c(hh.java:1356)**{color}
    The above issue can be fixed by setting maxlength in the UI itself. However in my case, there is a backend program trying to insert or update load of records. If the exact column name causing the error is known, it will be helpful to load the data properly in the next attempt.
    I have worked around it using SQLWarning and DataTruncation, but couldn't find the solution yet.
    Any help on this issue will be really appreciated.

    Medraf wrote:
    what is validator? Is it like validation.xml in struts? Are you suggesting like defining set of validation rules in the xml and apply the same for each record before doing any update or insert in DB? If so, then I could implement this validation logic in my backend code, however it may take more time to complete the batch prcoess.
    How you implement doesn't matter.
    However given a schema generating code for such validation is trivially simple at least for field types and sizes. Relationships are harder but those can be handled via custom rules.
    Alternatively I'm looking for some kind of API in JDBC or Hibernate which gives the detailed sql exception message containing the error info like the column name and the reason for failure while update or insert. If not possible, then validation logic needs to be implemented.Having seen something similar in Oracle years ago I seriously doubt that you are going find it magically appearing in JDBC/hibernate. There might be warning on the SQLException (see the java docs for SQLException) but I wouldn't count on it. Other than that the only possibility is making some sort of call in db2 itself that tells you the error. Only problem with that is it might require the context which might not be available once you see the error (presuming, especially for performance, that you are using batch processing.)
    As a start figure out how to find out using only db2 (docs and/or db2 forums.)

  • 2012 R2 server hangs on reboot from Windows Updates

    I have multiple Windows 2012 R2 servers which hang on restart after applying Wundows Updates. There are no enries in the logs to explain this.
    The server console session shows only the 2012 windows icon; the server will not accept a Ctrl+Alt+Delete, and must be Reset, or powered off and powered on, at which point it goes into the configuring Windows screen.
    Some servers are disconnected from the network, but not all (responds to ping, no alerts in SCOM 2012R2).

    Hi,
    Before going further, can you elaborate with us which Windows updates you have installed? Besides, can we boot the servers into Safe Mode? If the servers can boot into Safe Mode, we can try to uninstall the updates to see
    if it helps.
    Best regards,
    Frank Shen

  • My i hpone 5 has frozen while doing update. Can anyone give any advice on how to rectify please

    I have tried doing latest update and phone now frozen is anyone able to advise on how to get phone working again. many thanks

    Reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not help, connect in recovery mode and restore, explained here:
    If you can't update or restore your iOS device

  • Screen frozen with pic of itune symbol and to plug in adapter, while doing update

    please help. i did new update today and now my screeen is frozen as descibed above....any advice

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • Windows Server 2012 Hangs After a While

    Good day,
    My server hangs after a while then I have to hard boot it. I get the error 'Online data retrieval occurs under all my roles. Once I reboot it then the error disappears.
    Please help!!
    Thanks,
    Mao

    First of all, you would need to make sure that your server meets the hardware requirements to run Windows Server 2012 + the applications you use.
    For Windows Server 2012 System Requirements, you can refer to that: https://technet.microsoft.com/en-us/library/dn303418.aspx
    You can also proceed like the following:
    Install available Windows Updates (To be tested first)
    Install recent versions of your drivers, firmware and BIOS
    Uninstall all unused programs
    Run chkdsk /r /f and sfc /scannow
    Do a clean boot
    If this does not help then you can temporary disable security software in use and try again.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • I am getting a service start and stop alert while doing the windows server updates.

    HI
    I am getting a service start and stop alert while doing the windows server updates. Services are wmiApSrv , WPDBusEnum. Can you please help me to under stand why i am getting the service start and stop alert.
    Thanks & Regards
    Abhilash K Joy

    Hi,
    The WMI Performance Adapter (wmiApSrv) service provides performance library information from Windows Management Instrumentation (WMI) providers to clients on the network. This service only runs when Performance Data Helper is activated.
    This service is installed by default and its startup type is Manual. When started in the default configuration it will log on using the Local System account.
    You can try troubleshooting the issue using Clean Boot to check if the issue is related to third-party software.
    How to perform a clean boot in Windows
    http://support.microsoft.com/kb/929135/en-us
    Best Regards,
    Mandy
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Why does the server hang while starting up or the "csdb recover" hang when it is run?

    Sometimes after iPlanet Calendar Server crashes, the server hangs during
    startup or the csdb
    utility hangs when I execute the recover
    command.
    <P>
    One possible solution is to delete all of the .share
    files in the same directory as the
    Calendar Server database. In most cases, the server will successfully start up
    again.

    When you start up in Safe Mode various things aren't loaded at startup, Bob.
    Have a thinbk about which of the following may be involved in your own case:
    It forces a directory check of the startup volume.
    It loads only required kernel extensions (some of the items in /System/Library/Extensions).
    It runs only Apple-installed startup items (some of the items in /Library/StartupItems and /System/Library/StartupItems - and different than login items).
    Mac OS X 10.4 Tiger only: It disables all fonts other than those in /System/Library/Fonts .
    Mac OS X 10.4 Tiger only: It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501.
    Mac OS X 10.4 Tiger only: It disables any Login Items.
    (from http://docs.info.apple.com/article.html?artnum=107392)
    Have a look at http://docs.info.apple.com/article.html?artnum=106464 for some more possibilities.
    You may find it worth while using System Prefernces/Accounts to creat a new admin user account and see if the problem persists with it. THis may help you narrow down the problem further.
    Cheers
    Rod

  • Error while doing Challan updation

    Dear all,
       Iam getting error while doing Challan updation, system shows an error saying "No line Item exist for Challan updation" whereas iam having all the data but the system is not picking.
    pls help on this
    will get a good points for solving this

    I understood ur problem, u r running the J1INCHLN when u r running this program . Program chks both the Table BSEG & WITH_ITEM they 2 field from BSEG-BUZEI & WITH_ITEM -J_1IBUZEI . if this 2 line item is not matching then system will show the same error which u have mentioned.
    Whether this has occured first time or rarely it occurs, if first then just update the table WITH_ITEM for the field J_1IBUZEI with respect to BSEG-BUZEI for the TDS line item only. Make the changes with help of ur Internal consultant. write an update program.

  • Why does Firefox on my Windows 7 PC hang (become unresponsive) while it waits for most pages to load or run scripts?

    Firefox hangs (becomes unresponsive) when accessing many sites including Gmail. Eventually, when hung, Firefox will throw up a window saying "WARNING: A script has become unresponsive" or, in the case of Gmail, the page itself will say "Some Gmail features have failed to load due to an internet connectivity problem."
    IE8 and Google Chrome are working normally. I've tried Firefox in safe mode, re-installing and even running Firefox portable from a USB thumb drive. Each time with the same result—Firefox hangs or becomes unresponsive while it waits for most pages to load or run scripts.
    #### PC Workstation Environment ####
    Firefox 13.0.1
    Windows 7
    Symantec Endpoint Protection 11.0.6200.754
    --

    Your problem sounds like the one that a co-worker and I started to have about the same time. Check your Symantec client management control log. You might see a line like the following.
    Date and Time Severity Level Action Test / Production Description API Class Rule Caller Process ID Caller Process Parameter User
    2012-07-30 10:48:09 AM 15 Block Production Unauthorized NT call rejected by protection driver. System Built-in rule 1608 FlashplayerPlu FuncID-B6H, R... None
    At first we thought that it was a Javascript problem until we noticed this log. The key words are 'Block' and 'FlashPlayerPlu'. This problem recently started for us, perhaps with a software push 1-2 weeks ago. Internet Explorer does not hang when accessing pages with Flash.
    The Flash page does eventually load after a long time. However, since the whole browser hangs for a while, for the most part having the Flash plugin enabled makes Firefox unusable if accessing pages with Flash.
    Disabling the Flash plugin solves the hanging problem, but I do not know what is causing the problem, nor do I know when a combination of Windows 7, Flash, and Symantec will work. Your later version of Symantec shows that we might have the problem for a while, but I do not know what customization CSC did with Symantec. My coworker did run a complete virus scan, uncovering nothing. Another co-worker is running Windows XP. She does not have the problem, but I do not know what other versions of software she is running.
    Symantec Endpoint Protection version 11.0.6100.645
    Flash version 11.3.300.268
    Firefox version 14.0.1
    Windows 7 32-bit service pack 1

  • Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the  Live Cycle Installer.Can any one help me on resolving this issue it would be of g

    Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the  Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .

    I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating.  I
    could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
    The listed registry key does not exist
    Expand HKEY_LOCAL_MACHINE. 
    Click down the key path: 
       "System\CurrentControlSet\Services\NtFrs\Parameters" 
    Double click on the value name 
       "Enable Journal Wrap Automatic Restore" 
     

  • J_1IRG23D Table was not updated With Correct Values While Doing MIGO

    Hi Friends,
    I am new to the Excise duty , facing a proble in CIN -While doing MIGO, the Excise Calculation are coming correct values (i.e 10% ),but in the table it was not updated correctly (J_1IRG23D) only one entry is showing wrong ,the other entries in the table are correct.
    In table -J_1IEXCDTL the EXBED it was with correct value 10% of the Base value
    But In table -J_1IRG23D the EXBED,ADE,CESS It was updated with 0.06% on the base value .its gives wrong value
    Kindly help in this issue.
    Regards
    Siva

    Hi,
    Go to T Code - J2I5 (not 215 it is j 2 i 5) enter details and select register PLA Check box and execute. This can be extracted many times - no problem.
    After J2i5 balance will update in registers including tables.
    Ramesh

  • Itunes had error and shutdown while updating. when restoring iphone do you lose pics, texts emails etc?

    Itunes had an error and shutdown while updating my iphone 4.  Itune tells me my phone is in recovery mode and I must use restore before im able to use itunes.  I cannot do anything on my phone now.  It shows icons telling me to connect to itunes.  I want to know if I restore my phone do I lose any photos and that were not backed up yet? or What happens to my contacts and phone numbers?

    Itunes had an error and shutdown while updating my iphone 4.  Itune tells me my phone is in recovery mode and I must use restore before im able to use itunes.  I cannot do anything on my phone now.  It shows icons telling me to connect to itunes.  I want to know if I restore my phone do I lose any photos and that were not backed up yet? or What happens to my contacts and phone numbers?

Maybe you are looking for