SBS2008 mailbox access during migration

We are in the midst of doing a staged migration from SBS2008. My question is, once I have selected a mailbox for migration does the user still have access to their on-premise mailbox during the migration? When does email start to get delivered to
the Office 365 mailbox?
Thanks.

Hi,
Based on my knowledge, whether users can access the mailbox, it depends on your Exchange Version.
After the migration is done, the emails starts to be delivered to Office 365 mailbox.
By the way, in this forum we mainly discuss questions and feedbacks about Office client products, since your question is more related to the migration to Office 365, please note:
1. For Exchange on-premise questions, please post the question in Exchange Server forum:
https://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
2. For questions about Office 365, we have this Office 365 Community Forum:
http://community.office365.com/en-us/f/default.aspx
For further assistance upon this topic, you can post the question in the appropriate forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

OOF not working for mailboxes homed on Exchange 2010 server during migration

Hi There
I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
enable OOF via exchange powershell.
Users homed on the exchange 2013 servers does not have any issues.
The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
in the meantime I'm checking if anyone else had similar issues.
Any pointers will be welcome.

Hi ,
1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
3.Then please un check the proxy settings in browsers and check the same.
4.please use the command to check the auto discover
test-outlookwebservices
Please check the below links also.
http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Error during migration of ADF project from Jdev 12 to jdev 11.1.1.7

Hi all,
I have created a ADF project in Jdeveloper 12c.during migration from 12c to jdev11g everything was normal.but when i tried to deploy it over integrated weblogic 11g of jdeveloper,it created error-
9 Sep, 2014 8:56:39 PM IST> <Error> <J2EE> <BEA-160197> <Unable to load descriptor C:\Users\Mayank\AppData\Roaming\JDeveloper\system11.1.1.7.40.64.93\o.j2ee\drs\ADF_FUSION_POC/META-INF/weblogic-application.xml of module ADF_FUSION_POC. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:161)
at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:323)
at weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(AbstractDescriptorLoader2.java:788)
at weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescriptorLoader2.java:409)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(AbstractDescriptorLoader2.java:759)
at weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescriptorLoader2.java:768)
at weblogic.application.ApplicationDescriptor.getWeblogicApplicationDescriptor(ApplicationDescriptor.java:324)
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:181)
at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationForAppDeployment(MBeanConverter.java:67)
at weblogic.management.deploy.internal.MBeanConverter.setupNew81MBean(MBeanConverter.java:315)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.compatibilityProcessor(ActivateOperation.java:81)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.setupPrepare(AbstractOperation.java:295)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:97)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Caused by: com.bea.xml.XmlException: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.wl.LibraryRefBeanImpl@874a85bf(/LibraryRefs[[CompoundKey: adf.oracle.domain]])"
at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)
at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:539)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollection(AttributeRuntimeBindingType.java:381)
at com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)
at com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(AttributeRuntimeBindingType.java:140)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:200)
at com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:169)
at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)
at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:150)
... 27 more
Caused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.wl.LibraryRefBeanImpl@874a85bf(/LibraryRefs[[CompoundKey: adf.oracle.domain]])"
at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:231)
at weblogic.j2ee.descriptor.wl.WeblogicApplicationBeanImpl.setLibraryRefs(WeblogicApplicationBeanImpl.java:1440)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)
... 35 more
.>
<9 Sep, 2014 8:56:39 PM IST> <Error> <Deployer> <BEA-149605> <Failed to create App/Comp mbeans for AppDeploymentMBean ADF_FUSION_POC. Error - weblogic.management.DeploymentException: Unmarshaller failed.
weblogic.management.DeploymentException: Unmarshaller failed
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)
Truncated. see log file for complete stacktrace
Caused By: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.wl.LibraryRefBeanImpl@874a85bf(/LibraryRefs[[CompoundKey: adf.oracle.domain]])"
at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:231)
at weblogic.j2ee.descriptor.wl.WeblogicApplicationBeanImpl.setLibraryRefs(WeblogicApplicationBeanImpl.java:1440)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Truncated. see log file for complete stacktrace
>
<9 Sep, 2014 8:56:39 PM IST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1410276398843' for task '0'. Error is: 'weblogic.management.DeploymentException: Unmarshaller failed'
weblogic.management.DeploymentException: Unmarshaller failed
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)
Truncated. see log file for complete stacktrace
Caused By: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.wl.LibraryRefBeanImpl@874a85bf(/LibraryRefs[[CompoundKey: adf.oracle.domain]])"
at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:231)
at weblogic.j2ee.descriptor.wl.WeblogicApplicationBeanImpl.setLibraryRefs(WeblogicApplicationBeanImpl.java:1440)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Truncated. see log file for complete stacktrace
>
<9 Sep, 2014 8:56:39 PM IST> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'ADF_FUSION_POC'.>
<9 Sep, 2014 8:56:39 PM IST> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.management.DeploymentException: Unmarshaller failed
at weblogic.application.internal.EarDeploymentFactory.findOrCreateComponentMBeans(EarDeploymentFactory.java:193)
at weblogic.application.internal.MBeanFactoryImpl.findOrCreateComponentMBeans(MBeanFactoryImpl.java:48)
at weblogic.application.internal.MBeanFactoryImpl.createComponentMBeans(MBeanFactoryImpl.java:110)
at weblogic.application.internal.MBeanFactoryImpl.initializeMBeans(MBeanFactoryImpl.java:76)
at weblogic.management.deploy.internal.MBeanConverter.createApplicationMBean(MBeanConverter.java:89)
Truncated. see log file for complete stacktrace
Caused By: weblogic.descriptor.BeanAlreadyExistsException: Bean already exists: "weblogic.j2ee.descriptor.wl.LibraryRefBeanImpl@874a85bf(/LibraryRefs[[CompoundKey: adf.oracle.domain]])"
at weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:231)
at weblogic.j2ee.descriptor.wl.WeblogicApplicationBeanImpl.setLibraryRefs(WeblogicApplicationBeanImpl.java:1440)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
Truncated. see log file for complete stacktrace
>
#### Cannot run application ADF_FUSION_POC due to error deploying to IntegratedWebLogicServer.
[08:56:39 PM] #### Deployment incomplete. ####
[08:56:39 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
[Application ADF_FUSION_POC stopped and undeployed from Server Instance IntegratedWebLogicServer]
<Logger> <error> ServletContainerAdapter manager not initialized correctly.
how to solve that error.Thanx

Hi Shakif,
Ideally it should work and should be able to see in Changelist of target system.
Could you tell me exact error?
Thanks
Satish

Full mailbox access from trusted domain

I have an issue with users unable to login to OWA or ActiveSync using trusted domain credentials. I have two forests, FOREST A and FOREST B. I have a 2-way forest trust between them. I have migrated users from FOREST A to FOREST B, but their mailboxes need
to stay in FOREST A for the time being.
I have added Full Mailbox access for their FOREST B accounts, as well as Send As permission.
Outlook accesses their mailboxes no problem, with no security credential prompts. Sending is also fine. However, OWA and ActiveSync will not accept their FOREST B login credentials, I get the following error:
The Active Directory resource couldn't be accessed. This may be because the Active Directory object doesn't exist or the object has become corrupted,
or because you don't have the correct permissions.
I have a single Exchange 2010 SP2 server in FOREST A. All roles are on this server.
Why would Outlook clients work but OWA and ActiveSync are failing? Things I have checked:
DNS suffixes for trusted and trusting domain are set on the Exchange Server
Trust is in place and functional
Outlook clients work fine using FOREST B accounts
Changed OWA authentication options between UPN / Domain\User / logon name only - no options worked
Checked time sync between DC's and Exchange
Any ideas?? Thanks.

HiBobby4300,
Great checklist from Martin.
Please try following links to set the msExchMasterAccountSID attribute in the Active Directory Account Forest, for your reference:
http://www.msexchange.org/articles-tutorials/exchange-server-2003/management-administration/Understanding-External-Associated-Account-Windows-Server-2003-Exchange-2003.html
Additional, the best way is to configure linked mailboxes. This is a mailbox associated with an external account. More details about
Create a Linked Mailbox, please refer to:
http://technet.microsoft.com/en-us/library/bb123524(v=exchg.141).aspx
Best regards,
Allen Wang

How to access unread mails of all users in Exchange server without having Passwords and without giving mailbox access to other user.

Hi all,
I am using Exchange server 2013, my task is to create
Service , that
need's to monitor continuously for new mails of all Mailboxes in
my server. if any user got new mail i need to get that Mail Subject, Mail Body, Sender Email Address [From emailId] .
Limitation
: I don't have Passwords of mailboxes , so i gave all mailbox access permission to one user , then i completed this service using below code.
But now, Client
not willing to give Mailbox Permissions to one user because of security problems.
How can i do this without passwords and without giving permissions to other user ?
i don't want all mailbox access , i just need only
access Mail Subject , Body and Sender mail address .
How can i achieve
this ?
Process i follow
=> I created new user in server , and then i gave full permissions of all Mailboxes to newly created user[ex: james] in database level.
i use below command for giving permissions in database level.
Get-MailboxDatabase -Identity <Database Name> | Add-ADPermission -User <User> -AccessRights GenericAll
=> using below code i am searching unread mails of all user Mailboxes and then getting Subject, body and Sender Email address . here i am have list of users,
ExchangeService service = new ExchangeService(ExchangeVersion.Exchange2013);
service.Credentials = new WebCredentials("[email protected]", "password");
service.AutodiscoverUrl("[email protected]"); foreach (Object obj in usersList) // here i have Mailbox users list in usersList
{ var userMailbox = new Mailbox(obj.user);
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
SearchFilter.IsEqualTo filter1 = new SearchFilter.IsEqualTo(EmailMessageSchema.IsRead, false);
var itemView = new ItemView(50);
var userItems = service.FindItems(folderId, filter1, itemView);
foreach (var item in userItems)
item.Load();
var senderEmail = ((EmailMessage)item).From;
var subject = item.Subject;
var body = item.Body;

You would need to check that possibilities via WebServices but suggest you to post this in Development forum to get help from programmers....
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=exchangesvrdevelopment
Blog |
Get Your Exchange Powershell Tip of the Day from here

How can I disable web/data access during certain hours?

I have added a feature to my wireless account restricting my daughter's text/data/surfing access during evening hours. I thought I was pretty clever and assumed she would only have access to her music on her iPhone. Turns out she can still access all she wants using our home WIFI so my sceme is rendered useless. Other than confiscating her phone each evening, does anyone know how I can restrict wifi on her phone during certain hours?
Also, does anyone have a nano? Thinking she could use that for music and to set her alarm, but I don't think the nano has an alarm function.
Thanks for your input!

No way to restrict it during certain hours. You can restrict it always, or never. Parental supervision is one solution. It's a losing battle to try to outwit children. It's better to require trust, with consequences if trust is breached.

Getting error message " You are not authorized to access the migration tool "

One of the users is noticed with error message " You are not authorized to access the migration tool " in SAP Cloud for Customer tenant. thanks

Hello Raj,
It seems that this user does not have proper authorization to perform Data Migration.
You need to go to the WorkCenter View Assignment for this user under his access rights & need to assign him the workcenter "Business Configuration" & under it, also assign him relevant access to Data Migration.
This shall fix the issue & the user shall not get this error while trying to perform Data Migration.
Steps:
1. Go to Workcneter: "Application and User Management => Business Users => Seerach for the suer who gets this error => Edit-> Access Rights => Click on Workcenter view Assignment tab & assign the above mentioned worokcenter access and save."
Let me know for any further queries.
BR
Ankur

Providing administrator(s) full mailbox access to all mailboxes (database) not working

I'm setting up a new Exchange 2013 org. Everything is pretty fresh, only a few mailboxes have been added for testing.
I've added this permission, to provide full access to all the mailboxes in the database:
Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
I've verified the permission in ADSI Edit.
I have verified the permission in the recipient's mailbox delegation properties.
However, while logged into OWA using the admin account, if I try to open another user's mailbox from OWA, I just get a sad face that says "Something went wrong :( " .
Any ideas? I've tried resetting the owa virtual directory...reset IIS, rebooted several times, no luck.
Thanks

Hi
Is that ok when you set to single mailbox?
If ok, please try
Get-Mailbox -database “Mailbox Database” | Add-ADPermission -user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As
Cheers
Zi Feng
TechNet Community Support
Please see the original post, I've already tried "Get-MailboxDatabase -identity “Mailbox Database” | Add-ADPermission
-user netadmin -AccessRights GenericAll -ExtendedRights Receive-As, Send-As"
If I add the permission individually through ECP, it works just fine. What I'm trying to accomplish is full mailbox access to all mailboxes in the database now and in the future
(something that works just fine in Exchange 2010,) however in 2013 it is not working. I tried doing it via a security group instead, same result.

Db access during export

Hi,
9iR2 /AIX5
I'm wondering what is the status of db access during full export?
How any user query will be influenced?
We do export off business time, but it might be a case to export during the day.
Should I put db in 'restrict' mode or not?
What are the best practices?
Thx,
Dobby

Here is a script that will kill all sessions for a user. It would be pretty simple to modify it to kill all sessions except for a single account (or list of accounts). That way you do not have to bounce the database to clear existing sessions.
Make sure you understand this script, what it does, and how it does it before you use it.
Prompt Enter Oracle User ID.
accept oracle_user char prompt 'Oracle User ID: '
BEGIN
    FOR x IN ( SELECT sid, serial#
                 FROM v$session
                WHERE username = UPPER( '&oracle_user' ) )
    LOOP
      begin
dbms_output.put_line ('alter system kill session ''' || x.sid ||
                           ','                    || x.serial# ||
                           ''' immediate;');
         EXECUTE IMMEDIATE 'alter system kill session ''' || x.sid ||
                           ','                    || x.serial# ||
                           ''' immediate';
      exception
        when others then
          null;
      end;
    END LOOP;
END;

How to disable internet access during Adobe AIR installation

Hello,
I am trying to install Adobe AIR in an enterprise environment on numerous clients.
Unfortunately the installation procedure always tries to open an internet connection during installation.
As all users in our company require proxy authentification for internet access, the authentification dialog of our proxy always shows up when installing Adobe AIR. So the installation can not be processed without any user interaction.
We would like to install Adobe AIR silently in the backround. So we are looking for an opportunity to disable the internet access during AIR installation.
Thanks for any help,
Alex

Hi Alex,
You might want to give the Settings Manager a try (located at the bottom of this page.) However, I suspect the network might still be pinged regardless of this setting. Please let me know how it goes.
Thanks,
Chris

Does a migrate interrupts VM during migration

Couple of years ago I did a migration of VM on 2008 host with VMM2008. I don't remember if there is an interruption during migration.
I need to perform one time backup of live VM. I cannot stop this machine for making an export right now.
So need a confirmation of MIGRATE action. Worst case scenario I can do a backup later with the EXPORT option.
VM on 2008. VMM2008 available.
Thx.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

It depends on your server OS.
If you're running Windows Server 2008 R2 and later then you have live migration available which allows you to migrate without any downtime. Live migration was introduced in 2008 R2, so it isn't available in 2008 RTM. Quick Migration is available
in 2008 RTM, however that does require some downtime. In either case I believe you need to be using a failover cluster to use it.
If you're running Windows Server 2012 then things are a LOT easier, as you now have the use of Shared Nothing Live Migration, which essentially allows you to migrate the server with no downtime, and between two physical servers, without the need for them
to be part of a cluster. Just two boxes sat in a rack on a network, switching a VM from one to the other.

Altering database during migration from MS Access 2000

Hi to all Oracle forum members.
I want to migrate a MS Access 2000 database to Oracle 9i release 2. I want to know how can I alter the database design during the migration progress. My plan is to split an existing table to more and re-arrange the data and maybe introduce some new tables as well. These changes cane be made using the Migration Workbench or after migrating to Oracle? What is the most efficient way to do that and how can I accomplish these changes?
Thanks in advance...
A desperate new Oracle user... :)

Hello patriotaki! I used Oracle Migration Workbench and everything seems to be fine..just take care on code page migration isssues ...have fun!!!

Error in moving exchange 2010 mailboxes to Exchange 2013 SP1 during migration

Dear All,
We were running Exchange 2010 SP3 with MBX/HT/CAS role in single server. Now we are migrating our exchange 2010 to Exchange 2013 SP1. After configuring co-existence and during the mailbox move from Exchange 2010 to Exchange 2013 SP1, we are facing below
error. Please help to troubleshot. As per our search on net, people were suggesting that it can be due to not able to resolve NetBIOS name. We checked same and we are able to ping both servers by NetBIOS and FQDN names.
[PS] C:\Windows\system32>New-MoveRequest -Identity
'[email protected]' -TargetDatabase "CI-DB01"
MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80004005, ec=2423)
Diagnostic context:
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1722
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 323
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 1237
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 313
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 10060
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 311
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 3
    Lid: 12952   dwParam: 0x0 Msg: EEInfo: prm[0]: Long val: 22964
    Lid: 15000   dwParam: 0x0 Msg: EEInfo: prm[1]: Pointer val: 0x0
    Lid: 15000   dwParam: 0x0 Msg: EEInfo: prm[2]: Pointer val: 0xFE01A8C000000000
    Lid: 62184
    Lid: 16280   dwParam: 0x0 Msg: EEInfo: ComputerName: n/a
    Lid: 8600    dwParam: 0x0 Msg: EEInfo: ProcessID: 6004
    Lid: 12696   dwParam: 0x0 Msg: EEInfo: Generation Time: 0414-08-21T09:10:43.8970000Z
    Lid: 10648   dwParam: 0x0 Msg: EEInfo: Generating component: 18
    Lid: 14744   dwParam: 0x0 Msg: EEInfo: Status: 10060
    Lid: 9624    dwParam: 0x0 Msg: EEInfo: Detection location: 318
    Lid: 13720   dwParam: 0x0 Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x0 Msg: EEInfo: NumberOfParameters: 0
    Lid: 53361   StoreEc: 0x977
    Lid: 51859
    Lid: 33649   StoreEc: 0x977
    Lid: 43315
    Lid: 58225   StoreEc: 0x977
    Lid: 39912   StoreEc: 0x977
    Lid: 54129   StoreEc: 0x977
    Lid: 50519
    Lid: 59735   StoreEc: 0x977
    Lid: 59199
    Lid: 27356   StoreEc: 0x977
    Lid: 65279
    Lid: 52465   StoreEc: 0x977
    Lid: 60065
    Lid: 33777   StoreEc: 0x977
    Lid: 59805
    Lid: 52487   StoreEc: 0x977
    Lid: 19778
    Lid: 27970   StoreEc: 0x977
    Lid: 17730
    Lid: 25922   StoreEc: 0x977
    + CategoryInfo          : NotSpecified: (:) [New-MoveRequest], RemoteTransientException
    + FullyQualifiedErrorId : [Server=Exch01,RequestId=f6886977-92f1-4148-991b-aa76b449aff5,TimeStamp=8/21/2014 9:1
   0:43 AM] [FailureCategory=Cmdlet-RemoteTransientException] 7FCC37,Microsoft.Exchange.Management.RecipientTasks.New
MoveRequest
+ PSComputerName        : Exch01.domain.local
Please help as we are stuck here!!
Thanks in advance!!

Can yo ping server by name not by FQDN? e.g. ping server1.
Make sure firewall/antivirus not blocking communication. Disable antivirus and try
Thanks,
MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Migrating Exchange 2010 to new hardware - Can't move mailboxes - Access Denied

I have installed Exchange 2010 on new machine, configured connectors, installed certificate, and tested without issue.
When I try to move a mailbox from old exchange server to new exchange server, I get the following error:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:00:00
TestBox TestMailBox
Failed
Error:
MapiExceptionNoAccess: Unable to make connection to the server. (hr=0x80070005, ec=-2147024891)
Diagnostic context:
Lid: 8600 dwParam: 0x5 Msg: EEInfo: ProcessID: 2640
Lid: 12696 dwParam: 0x5 Msg: EEInfo: Generation Time: 2014-01-02 17:32:11:828
Lid: 10648 dwParam: 0x5 Msg: EEInfo: Generating component: 2
Lid: 14744 dwParam: 0x5 Msg: EEInfo: Status: 5
Lid: 9624 dwParam: 0x5 Msg: EEInfo: Detection location: 701
Lid: 13720 dwParam: 0x5 Msg: EEInfo: Flags: 0
Lid: 11672 dwParam: 0x5 Msg: EEInfo: NumberOfParameters: 2
Lid: 12952 dwParam: 0x5 Msg: EEInfo: prm[0]: Long val: 9
Lid: 12952 dwParam: 0x5 Msg: EEInfo: prm[1]: Long val: 0
Lid: 53361 StoreEc: 0x80070005
Lid: 51859
Lid: 33649 StoreEc: 0x80070005
Lid: 43315
Lid: 58225 StoreEc: 0x80070005
Lid: 50835
Lid: 62321 StoreEc: 0x80070005
Lid: 47987
Lid: 50033 StoreEc: 0x80070005
Lid: 52465 StoreEc: 0x80070005
Lid: 60065
Lid: 33777 StoreEc: 0x80070005
Lid: 59805 Lid: 52209 StoreEc: 0x80070005
Lid: 19778
Lid: 27970 StoreEc: 0x80070005
Lid: 17730
Lid: 25922 StoreEc: 0x80070005
Exchange Management Shell command attempted:
'domain.local/Users/TestBox TestMailBox' | New-MoveRequest -TargetDatabase 'Mailbox Database ######'
Elapsed Time: 00:00:00
I get similar errors when trying to view certificate on other server (old to new or new to old).
When I run: Get-ClientAccessServer | Test-MRSHealth - it retrieves local server info fine, but I get an access denied error trying to retrieve from old server.
I have searched and tried everything I could find to no avail. Any help would be greatly appreciated.
-Frank

1) Are you on a 2008 Server? If so you will need to right click and run as administrator on the EMC/Powershell you are using.
2) Did you Prepare the Legacy Permissions when you did the new Exchange install?
-http://technet.microsoft.com/en-us/library/aa997914(v=exchg.141).aspx-

SBS/Exchange 2003 Mailboxes not found during migration batch

I'm migrating a small SBS 2003 installation to Exchange online, and I'm getting the following error for all mailboxes:
Error: MigrationInvalidTargetAddressException: A valid primary email address [email protected] couldn‎'t be found on the target.
The email addresses exist, and connectivity works. searches on technet seem to come up mostly empty, but I can't be the first person who's run into this.
Any help?
thanks
bkd

What kind of migration are you performing, staged? Seems like the object has not been synced correctly. Login to EO PowerShell, run the following cmdlet:
Get-Recipient [email protected]

SBS2008 mailbox access during migration

Similar Messages

Maybe you are looking for