SBS2011 - microsoft exchange transport service not installed

i have been having issues with SMTP and now with some changes advised I have lost the MS exchange Transport service all together - it is not listed under services!
how to I re-install just the transport service - and more - where did it go???
KArl

Hi:
Can't really tell from here what happened, but please review this article and let us know if it helps:
http://technet.microsoft.com/en-us/library/gg680345.aspx
Larry Struckmeyer[MVP] If your question is answered please mark the response as the answer so that others can benefit.

Similar Messages

  • Microsoft Exchange Transport Service....Starting (Does not reach a running state, stops and tries starting again)

    Hi All,
    After installing the lovely update (https://technet.microsoft.com/library/security/ms14-068) that Microsoft released last week. I restarted my exchange 2013 server and now the Microsoft Exchange Transport Service will not start. It is pretty much constantly
    in a starting state. Tried all the standard stuff, restarting the server etc.
    Running on Server 2012 R2
    Hopefully someone can shed some light.
    Pete

    Hi,
    A few questions here :
    - Have you installed all roles on the same server ? ( MultiRole server )
    - If yes, do use the preconfigured receive connectors from Exchange or did you add custom connectors ?
    - Do you have any anti-spam service installed on the server that could be listening on port 25 ?

  • Exchange Transport Service not starting

    Hello All:
    I have installed exchange server 2007 in my Windows Server 2008 domain.I have noticed that when I open up the services tab on my server and check the services which are running that the Information Store and Transport services are set to start automatically. However, they are not running. When I tell it to start the Information Store that service will start. When I tell it to start the Microsoft Exchange Transport  service, I get the following message:
    The Microsoft Exchange Transport Service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. I know that this service must be running in order for me to send and receive mail. Can someone tell me how to troubleshoot and correct this problem. Thanks in advance for any and all responses to this question.
    When I look in the event logs I see the following:Log Name:      Application
    Source:        MSExchange TransportService
    Date:          1/31/2009 10:43:05 AM
    Event ID:      1016
    Task Category: ProcessManager
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      AESTONE.stone-and-stone.com
    Description:
    The worker process crashes continuously on startup: C:\Program Files\Microsoft\Exchange Server\Bin\edgetransport.exe. The service will be stopped.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchange TransportService" />
        <EventID Qualifiers="49156">1016</EventID>
        <Level>2</Level>
        <Task>1</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2009-01-31T15:43:05.000Z" />
        <EventRecordID>478666</EventRecordID>
        <Channel>Application</Channel>
        <Computer>AESTONE.stone-and-stone.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data>C:\Program Files\Microsoft\Exchange Server\Bin\edgetransport.exe</Data>
      </EventData>
    </Event>
    Any suggestions anyone?

     
    Dear customer:
    Did you upgrade a computer that is running Windows Server 2003 to Windows Server 2008?
    If so, please refer to the following article to fix the issue:
    Multiple Exchange Server 2007 services do not start when you upgrade a computer that is also running Windows Server 2003 to Windows Server 2008
    http://support.microsoft.com/default.aspx?scid=kb;EN-US;951402
    Also, check Exchange2007 Setup log file, if the error resemble the following words:
    2/3/2007 1:07:16 AM] [2] [ERROR] Service 'MSExchangeTransport' failed to start.
    Check the event log for possible reasons for the service start failure.
    [2/3/2007 1:07:16 AM] [2] Ending processing.
    [2/3/2007 1:07:16 AM] [1] The following 1 error(s) occurred during task
    execution:
    [2/3/2007 1:07:16 AM] [1] 0. ErrorRecord: Service 'MSExchangeTransport' failed to
    start. Check the event log for possible reasons for the service start failure.
    [2/3/2007 1:07:16 AM] [1] 0. ErrorRecord:
    Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service
    'MSExchangeTransport' failed to start. Check the event log for possible reasons for
    the service start failure.
    [2/3/2007 1:07:16 AM] [1] [ERROR] Service 'MSExchangeTransport' failed to start.
    Check the event log for possible reasons for the service start failure.
    [2/3/2007 1:07:16 AM] [1] Setup is halting task execution because of one or more
    errors in a critical task.
    [2/3/2007 1:07:16 AM] [1] Finished executing component tasks.
    [2/3/2007 1:07:16 AM] [1] Ending processing.
    Perform the following steps to fix the issue:
    1.         Open Registry on Exchange 2007 box.
    2.         Navigate to the following registry key:
    HKLM\SYSTEM\ControlSet001\Services\Tcpip\Parameters
    3.         Right click Parameters,choose permissions,add explicitly the machine account Domainname\Exchange$ (Where Exchange is hostname for Exchange 2007 box) to the
    Access control list by giving read access to it.(Exchange must be able to read this key to find the FQDN of the server so that the SPN can be registered).
    4.         Check the effect.
    Rock Wang - MSFT

  • Microsoft Exchange Transport Service has been stopped.

    I changed out failing drives on a customers SBS 2011 which uses Intel Rapid Storage Technology. I saw that it had an option to email a failing condition to up to three addresses. I configured it but got the Could Not Connect error from the RST software.
    I Googled the condition and determined that I needed to install another Receive Connector on a different port, which is what I tried.
    I opened all of the receive connectors in the MS Exchange Console - Server Configuration - Hub Transport section. As far as I know I did not change anything there, I just looked and cancelled. None of the new receive connectors I configured worked., Everytime
    one configuration made no difference I deleted the connector, re added a connector using different options and tried the RST email test again.
    Getting nowhere, I deleted the last new connector I configured, Closed the Exchange management console figuring I had a job for some time in the future when things were slow.
    This morning I get the call No e-mail, and found the Exchange Transport Service stopped. I restarted it, made sure it was set to automatic, and it ran for about 3 minutes and then stopped. Right now I am keeping my customer working by starting the service
    every 5 to 10 minutes.
    Since I am not going to stay here indefinitely restarting the service, I need help!
    J R Weymouth

    Thanks for the links, I'll check them out. I finally got an error from the logs, in fact there are so many errors in the log I don't even know which one to follow. It gets a cluster of errors every 5 minutes (6 errors one critical) but that is when the transport
    is shut down. I am relaying the first message that comes up after I restart the transport.
    Log Name:      Application
    Source:       
    MSExchangeTransport
    Date:         
    9/16/2014 9:11:48 AM
    Event ID:      17003
    Task Category: Storage
    Level:        
    Error
    Keywords:      Classic
    User:         
    N/A
    Computer:      SBSSRVR2011.MyDomain.local
    Description:
    Sender Reputation Database: An operation has encountered a fatal error. The database may be corrupted. The Microsoft Exchange Transport service is shutting down. Manual database recovery or repair may be required. Exception details: Microsoft.Exchange.Isam.IsamDbTimeCorruptedException:
    Dbtime on current page is greater than global database dbtime (-344)
       at Microsoft.Exchange.Isam.JetInterop.MJetDelete(MJET_TABLEID tableid)
       at Microsoft.Exchange.Isam.Interop.MJetDelete(MJET_TABLEID tableid)
       at Microsoft.Exchange.Transport.Storage.DataTableCursor.DeleteCurrentRow()
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="MSExchangeTransport" />
        <EventID Qualifiers="49156">17003</EventID>
        <Level>2</Level>
        <Task>17</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-09-16T16:11:48.000000000Z" />
        <EventRecordID>1141638</EventRecordID>
        <Channel>Application</Channel>
        <Computer>SBSSRVR2011.BainInsuranceAgency.local</Computer>
        <Security />
      </System>
      <EventData>
        <Data>Sender Reputation Database</Data>
        <Data>Microsoft.Exchange.Isam.IsamDbTimeCorruptedException: Dbtime on current page is greater than global database dbtime (-344)
       at Microsoft.Exchange.Isam.JetInterop.MJetDelete(MJET_TABLEID tableid)
       at Microsoft.Exchange.Isam.Interop.MJetDelete(MJET_TABLEID tableid)
       at Microsoft.Exchange.Transport.Storage.DataTableCursor.DeleteCurrentRow()</Data>
      </EventData>
    </Event>
    J R Weymouth

  • Exchange 2013 - The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the configured threshold

    Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%). 
    The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
    configured threshold.” 
    There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20). 
    From what I can tell, all of the IP addresses are from Taiwan. 
    The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014). 
    From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening. 
    The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
    Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
    The Error reads:
    The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
    mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
    Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
    Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
    At line:1 char:1
    + New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
    + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
    I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
    Recent changes to the system:
    About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
    Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
    I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
    Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!

    Hi,
    Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
    Thanks,
    Simon Wu
    TechNet Community Support

  • Event ID 7031 followed by 7032 The Microsoft Exchange Transport service terminated unexpectedly.

    Hello
    Have a strange problem that reoccurs every day. The following are recorded in the log.
    7031
    The Microsoft Exchange Transport service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 5000 milliseconds: Restart the service.7032The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Microsoft Exchange Transport service, but this action failed with the following error:
    An instance of the service is already running.Any suggestions are welcome./Deland
    /Andreas

    Here are the result from the level 5 logging. I Havent disabled the TransportAgent yet.
    Log Name:      Application
    Source:        MSExchangeTransport
    Date:          2013-07-19 10:13:25
    Event ID:      12025
    Task Category: TransportService
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      XXXX
    Description:
    Transport service is disconnecting performance counters with process lifetime from their old process.
    Followed by 32 events of 12028
    Log Name:      Application
    Source:        MSExchangeTransport
    Date:          2013-07-19 10:13:25
    Event ID:      12028
    Task Category: TransportService
    Level:         Warning
    Keywords:      Classic
    User:          N/A
    Computer:      XXXX
    Description:
    The process with process ID 1100 is holding the performance counter configuration cache total requests Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062 from instance transportrules(B1D082BB) RefCount=0 SpinLock=0 Offset=3936
    and category MSExchangeTransport Configuration Cache while running processes are: Processes running are:
    6300 UMWorkerProcess
    5312 Microsoft.Exchange.ServiceHost
    1568 Microsoft.Exchange.Diagnostics.Service
    2212 WMSvc
    776 svchost
    1760 MSExchangeHMHost
    9808 MSExchangeDelivery
    376 explorer
    2252 Microsoft.Exchange.Directory.TopologyService
    9436 rundll32
    1752 nscp
    2932 noderunner
    6076 MSExchangeSubmission
    7056 scanningprocess
    1736 PccNtMon
    1340 fms
    4688 MSExchangeTransport
    1732 Ntrtscan
    2716 MSExchangeMailboxAssistants
    548 winlogon
    9016 TmProxy
    348 svchost
    2904 SMSvcHost
    1524 inetinfo
    8376 TMBMSRV
    5264 MSExchangeThrottling
    12552 powershell
    4080 w3wp
    1124 svchost
    7688 svchost
    12744 w3wp
    332 smss
    1316 svchost
    13188 mmc
    5772 ForefrontActiveDirectoryConnector
    3080 HostedAgent
    11364 conhost
    3268 w3wp
    1060 svchost
    2924 noderunner
    904 dwm
    3856 w3wp
    504 wininit
    7200 Microsoft.Exchange.Store.Worker
    1668 SMSvcHost
    4832 MSExchangeFrontendTransport
    2072 sftracing
    4932 MSExchangeMailboxReplication
    7192 Microsoft.Exchange.Store.Worker
    6992 Microsoft.Exchange.UM.CallRouter
    9640 w3wp
    9204 svchost
    3244 svcGenericHost
    1200 Microsoft.Exchange.Store.Service
    876 svchost
    10724 rundll32
    3040 conhost
    2480 w3wp
    5992 MSExchangeTransportLogSearch
    596 services
    12508 w3wp
    2636 MSExchangeHMWorker
    11892 taskhostex
    4796 Microsoft.Exchange.Search.Service
    3568 WmiPrvSE
    12532 ServerManager
    9564 msdtc
    4352 Microsoft.Exchange.EdgeSyncSvc
    2032 mqsvc
    6560 scanningprocess
    3404 TmListen
    4384 updateservice
    3004 scanningprocess
    6744 umservice
    1424 hostcontrollerservice
    828 svchost
    432 csrss
    696 svchost
    1284 spoolsv
    8152 w3wp
    3576 w3wp
    1264 svchost
    496 csrss
    5928 Microsoft.Exchange.RpcClientAccess.Service
    2972 noderunner
    2380 conhost
    604 lsass
    6884 Microsoft.Exchange.Store.Worker
    10056 WmiPrvSE
    992 svchost
    2764 noderunner
    5324 msexchangerepl
    4 System
    3548 Microsoft.Exchange.AntispamUpdateSvc
    2168 svchost
    0 Idle
    And 28 events on 106
    Log Name:      Application
    Source:        MSExchange Common
    Date:          2013-07-19 10:13:29
    Event ID:      106
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      XXXX
    Description:
    Performance counter updating error. Counter name is DataRow seeks total, category name is MSExchangeTransport Database. Optional code: 2. Exception: The exception thrown is : System.InvalidOperationException: Instance '_total' already exists with a lifetime
    of Process.  It cannot be recreated or reused until it has been removed or until the process using it has exited.
       at System.Diagnostics.SharedPerformanceCounter.FindInstance(Int32 instanceNameHashCode, String instanceName, CategoryEntry* categoryPointer, InstanceEntry** returnInstancePointerReference, Boolean activateUnusedInstances, PerformanceCounterInstanceLifetime
    lifetime, Boolean& foundFreeInstance)
       at System.Diagnostics.SharedPerformanceCounter.GetCounter(String counterName, String instanceName, Boolean enableReuse, PerformanceCounterInstanceLifetime lifetime)
       at System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime)
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.get_RawValue()
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.get_RawValue()
    Last worker process info : System.ArgumentException: Process with an Id of 14868 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Processes running while Performance counter failed to update:
    6300 UMWorkerProcess
    5312 Microsoft.Exchange.ServiceHost
    1568 Microsoft.Exchange.Diagnostics.Service
    2212 WMSvc
    776 svchost
    1760 MSExchangeHMHost
    9808 MSExchangeDelivery
    376 explorer
    2252 Microsoft.Exchange.Directory.TopologyService
    9436 rundll32
    1752 nscp
    2932 noderunner
    10416 EdgeTransport
    6076 MSExchangeSubmission
    7056 scanningprocess
    1736 PccNtMon
    1340 fms
    4688 MSExchangeTransport
    1732 Ntrtscan
    2716 MSExchangeMailboxAssistants
    548 winlogon
    9016 TmProxy
    348 svchost
    2904 SMSvcHost
    1524 inetinfo
    15116 conhost
    8376 TMBMSRV
    5264 MSExchangeThrottling
    12552 powershell
    4080 w3wp
    1124 svchost
    7688 svchost
    12744 w3wp
    332 smss
    1316 svchost
    13188 mmc
    5772 ForefrontActiveDirectoryConnector
    3080 HostedAgent
    11364 conhost
    3268 w3wp
    1060 svchost
    2924 noderunner
    904 dwm
    3856 w3wp
    504 wininit
    7200 Microsoft.Exchange.Store.Worker
    1668 SMSvcHost
    4832 MSExchangeFrontendTransport
    2072 sftracing
    4932 MSExchangeMailboxReplication
    7192 Microsoft.Exchange.Store.Worker
    6992 Microsoft.Exchange.UM.CallRouter
    9640 w3wp
    9204 svchost
    3244 svcGenericHost
    1200 Microsoft.Exchange.Store.Service
    876 svchost
    10724 rundll32
    3040 conhost
    2480 w3wp
    5992 MSExchangeTransportLogSearch
    596 services
    12508 w3wp
    2636 MSExchangeHMWorker
    11892 taskhostex
    4796 Microsoft.Exchange.Search.Service
    3568 WmiPrvSE
    12532 ServerManager
    9564 msdtc
    4352 Microsoft.Exchange.EdgeSyncSvc
    2032 mqsvc
    6560 scanningprocess
    3404 TmListen
    4384 updateservice
    3004 scanningprocess
    6744 umservice
    1424 hostcontrollerservice
    828 svchost
    432 csrss
    696 svchost
    1284 spoolsv
    8152 w3wp
    3576 w3wp
    1264 svchost
    496 csrss
    5928 Microsoft.Exchange.RpcClientAccess.Service
    2972 noderunner
    2380 conhost
    604 lsass
    6884 Microsoft.Exchange.Store.Worker
    10056 WmiPrvSE
    992 svchost
    2764 noderunner
    5324 msexchangerepl
    4 System
    3548 Microsoft.Exchange.AntispamUpdateSvc
    2168 svchost
    0 Idle
    Performance Counters Layout information: A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=59 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : queue(B351294)
    RefCount=0 SpinLock=0 Offset=48552, categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 8(ED0419E7) RefCount=0 SpinLock=0 Offset=44384,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 6(ED0419E9) RefCount=0 SpinLock=0 Offset=40216,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=4 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 3(ED0419EC) RefCount=0 SpinLock=0 Offset=36048,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=3 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 1(ED0419EE) RefCount=0 SpinLock=0 Offset=31880,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=18 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat(B874BB3) RefCount=0 SpinLock=0 Offset=27712,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : inqueue(56145953) RefCount=0 SpinLock=0 Offset=23544,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=17 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : smtpin(81392C98) RefCount=0 SpinLock=0 Offset=19376,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : mail(7C6FB7CC) RefCount=0 SpinLock=0 Offset=15208,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=68 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : other(ADC98A1) RefCount=0 SpinLock=0 Offset=11040,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 4832, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4832 StartupTime: 130183498009738545, currentInstance : _total(CFBEE918) RefCount=1 SpinLock=0 Offset=32,
    categoryName: MSExchangeTransport Database
    Log Name:      Application
    Source:        MSExchange Common
    Date:          2013-07-19 10:13:31
    Event ID:      106
    Task Category: General
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      XXXX
    Description:
    Performance counter updating error. Counter name is Transaction Durable Callback Count/sec, category name is MSExchangeTransport Database. Optional code: 1. Exception: The exception thrown is : System.InvalidOperationException: Instance '_total' already exists
    with a lifetime of Process.  It cannot be recreated or reused until it has been removed or until the process using it has exited.
       at System.Diagnostics.SharedPerformanceCounter.FindInstance(Int32 instanceNameHashCode, String instanceName, CategoryEntry* categoryPointer, InstanceEntry** returnInstancePointerReference, Boolean activateUnusedInstances, PerformanceCounterInstanceLifetime
    lifetime, Boolean& foundFreeInstance)
       at System.Diagnostics.SharedPerformanceCounter.GetCounter(String counterName, String instanceName, Boolean enableReuse, PerformanceCounterInstanceLifetime lifetime)
       at System.Diagnostics.SharedPerformanceCounter..ctor(String catName, String counterName, String instanceName, PerformanceCounterInstanceLifetime lifetime)
       at System.Diagnostics.PerformanceCounter.InitializeImpl()
       at System.Diagnostics.PerformanceCounter.IncrementBy(Int64 value)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.IncrementBy(Int64 incrementValue)
    Last worker process info : System.ArgumentException: Process with an Id of 14868 is not running.
       at System.Diagnostics.Process.GetProcessById(Int32 processId)
       at Microsoft.Exchange.Diagnostics.ExPerformanceCounter.GetLastWorkerProcessInfo()
    Processes running while Performance counter failed to update:
    6300 UMWorkerProcess
    5312 Microsoft.Exchange.ServiceHost
    1568 Microsoft.Exchange.Diagnostics.Service
    2212 WMSvc
    776 svchost
    1760 MSExchangeHMHost
    9808 MSExchangeDelivery
    376 explorer
    2252 Microsoft.Exchange.Directory.TopologyService
    9436 rundll32
    1752 nscp
    2932 noderunner
    10416 EdgeTransport
    6076 MSExchangeSubmission
    7056 scanningprocess
    1736 PccNtMon
    1340 fms
    4688 MSExchangeTransport
    1732 Ntrtscan
    2716 MSExchangeMailboxAssistants
    548 winlogon
    9016 TmProxy
    348 svchost
    2904 SMSvcHost
    1524 inetinfo
    15116 conhost
    8376 TMBMSRV
    5264 MSExchangeThrottling
    12552 powershell
    4080 w3wp
    1124 svchost
    7688 svchost
    12744 w3wp
    332 smss
    1316 svchost
    13188 mmc
    5772 ForefrontActiveDirectoryConnector
    3080 HostedAgent
    11364 conhost
    3268 w3wp
    1060 svchost
    2924 noderunner
    904 dwm
    3856 w3wp
    504 wininit
    7200 Microsoft.Exchange.Store.Worker
    1668 SMSvcHost
    4832 MSExchangeFrontendTransport
    2072 sftracing
    4932 MSExchangeMailboxReplication
    7192 Microsoft.Exchange.Store.Worker
    6992 Microsoft.Exchange.UM.CallRouter
    9640 w3wp
    9204 svchost
    3244 svcGenericHost
    1200 Microsoft.Exchange.Store.Service
    876 svchost
    10724 rundll32
    3040 conhost
    2480 w3wp
    5992 MSExchangeTransportLogSearch
    596 services
    12508 w3wp
    2636 MSExchangeHMWorker
    11892 taskhostex
    4796 Microsoft.Exchange.Search.Service
    3568 WmiPrvSE
    12532 ServerManager
    9564 msdtc
    4352 Microsoft.Exchange.EdgeSyncSvc
    2032 mqsvc
    6560 scanningprocess
    3404 TmListen
    4384 updateservice
    3004 scanningprocess
    6744 umservice
    1424 hostcontrollerservice
    828 svchost
    432 csrss
    696 svchost
    1284 spoolsv
    8152 w3wp
    3576 w3wp
    1264 svchost
    496 csrss
    5928 Microsoft.Exchange.RpcClientAccess.Service
    2972 noderunner
    2380 conhost
    604 lsass
    6884 Microsoft.Exchange.Store.Worker
    10056 WmiPrvSE
    992 svchost
    2764 noderunner
    5324 msexchangerepl
    4 System
    3548 Microsoft.Exchange.AntispamUpdateSvc
    2168 svchost
    0 Idle
    Performance Counters Layout information: A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=59 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : queue(B351294)
    RefCount=0 SpinLock=0 Offset=48552, categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 8(ED0419E7) RefCount=0 SpinLock=0 Offset=44384,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 6(ED0419E9) RefCount=0 SpinLock=0 Offset=40216,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=4 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 3(ED0419EC) RefCount=0 SpinLock=0 Offset=36048,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=3 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat event 1(ED0419EE) RefCount=0 SpinLock=0 Offset=31880,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=18 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : cat(B874BB3) RefCount=0 SpinLock=0 Offset=27712,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : inqueue(56145953) RefCount=0 SpinLock=0 Offset=23544,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 1100, counter : datarow seeks total Value=17 SpinLock=0 Lifetime=Type: 1 ProcessId: 1100 StartupTime: 130186827159405062, currentInstance : smtpin(81392C98) RefCount=0 SpinLock=0 Offset=19376,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 10416, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10416 StartupTime: 130186952059962770, currentInstance : mail(7C6FB7CC) RefCount=1 SpinLock=0 Offset=15208,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 10416, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 10416 StartupTime: 130186952059962770, currentInstance : other(ADC98A1) RefCount=1 SpinLock=0 Offset=11040,
    categoryName: MSExchangeTransport Database
    A process is holding onto a transport performance counter. processId : 4832, counter : datarow seeks total Value=0 SpinLock=0 Lifetime=Type: 1 ProcessId: 4832 StartupTime: 130183498009738545, currentInstance : _total(CFBEE918) RefCount=1 SpinLock=0 Offset=32,
    categoryName: MSExchangeTransport Database
    Then ESE  Recovery starts on the Transport database. 
    /Andreas

  • Microsoft Exchange Transport service terminated unexpectedly

    Hi All,
    We have configured exchange 2013 in windows server 2012. From last two days exchange transport service getting stopped.
    Microsoft Exchange Transport service terminated unexpectedly.
    Log Name:      System
    Source:        Service Control Manager
    Date:          11/13/2014 1:10:28 AM
    Event ID:      7031
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      BMBPRMBX01.BMB.LOCAL
    Description:
    The Microsoft Exchange Transport service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 5000 milliseconds: Restart the service.

    Hi,
    This issue may due to some of the corrupt message in the queue. Please try these steps to solve this issue.
    Pause the transport service and let all the messaged go out.
    When queue is empty, stop the transport service and go to the mail.que database in transport-->queue folder. Cut paste all the files from queue folder to some other folder as backup.
    Now start the transport service, it will create a fresh mail.que database and observe if the service us crashing again.
    In addition, please try to disable any AV software, sometimes it will cause Transport service corrupted.
    Best Regards.

  • Can't install Microsoft Exchange Web Services Managed API 2.0 - message says it is already installed but it is not.

    I tried to install the Microsoft Exchange Web Services Managed API 2.0 but I got a message saying it was already installed and that I should un-install it.  However it does not appear in the control panel un-install a program list.  I am using
    VS2013 on windows 8.  What can I do to get it to work?
    Mike VE

    Hello,
    Thank you for your sharing.
    If you have any feedback on our support, please click
    here
    Cara Chen
    TechNet Community Support

  • Exchange replication service not starting after installing Rollup update 3 v3

    Hi,
    I have installed rollup update 3 v3 for exchange 2010 sp1 on my mailbox server. This mailbox server is a DAG member. After installing update rollup, Microsoft exchange replication service on this server attempts to start & show status started for couple
    of seconds & then gets stopped. This behaviuor continues untill i uninstall this rollup. I have installed the same rollup on other DAG member as well with no problem. The following errors are generated in the application logs,
    Event ID 4096: The Microsoft Exchange Replication service failed to start the Tcp Listener. Please review the Event Log for more information. The system will attempt to start the service again in 30 seconds.
    Event ID 2121: The Microsoft Exchange Replication service failed to start the TCP listener. Error: System.Net.Sockets.SocketException: Only one usage of each socket address (protocol/network address/port) is normally permitted
    at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
    at System.Net.Sockets.Socket.Bind(EndPoint localEP)
    at Microsoft.Exchange.Cluster.Replay.TcpListener.StartListening()
    Event ID 4999:
    Watson report about to be sent for process id: 6000, with parameters: E12, c-RTL-AMD64, 14.01.0289.001, msexchangerepl, M.E.Cluster.Replay, M.E.C.R.ReplicaInstance.TargetGetCopyStatus, System.MethodAccessException, a379, 14.01.0289.001.
    ErrorReportingEnabled: True
    Event ID 2060: The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB1\SRV-MBX2. The copy will be set to failed. Error:
    The NetworkManager has not yet been initialized. Check the event logs to determine the cause.
    Event ID 2060:
    The Microsoft Exchange Replication service encountered a transient error while attempting to start a replication instance for DB2\SRV-MBX2. The copy will be set to failed. Error: The NetworkManager has not yet been initialized.
    Check the event logs to determine the cause.
    Thanks
    in Advance!!

    I hope you are following the best practice to install rollup on DAG. 
    Suspend activation for the databases on the server being updated.
    Perform a server switchover so that all databases on the server are passive copies. There will be a brief interruption in service for the mailboxes hosted on the active databases during the switchover process.
    Install the update rollup.
    Resume activation for the databases on the updated server.
    Perform database switchovers as needed.
    http://blogs.technet.com/b/scottschnoll/archive/2009/12/10/installing-update-rollup-1-for-exchange-2010-on-dag-members.aspx
    Thanks Uday Kiran,
    Senior Consultant
    Cyquent Technology Consultants, Dubai
    Please Mark as answer if it helps you

  • Exchange Transport Service is not starting

    Hi,
    We stopped our exchange server machines. When we started it again Exchange Transport service is not starting. Can anyone help us in this regard?

    Hi AneesurRehman,
    Thank you for your question.
    We could restart the service of “Microsoft Exchange AD topology ”,then manually start the Exchange Transport Service, if not, check if there are other Exchange services which were not started, we could start other Exchange service before we start Exchange
    Transport Service.
    If we didn’t start any Exchange service, we could check if there are any Event IDs in Application Log. I suggest we post Event Id to
    [email protected] for our troubleshooting. 
    Best Regard,
    Jim
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Jim Xu
    TechNet Community Support

  • "The Microsoft Exchange Diagnostics service terminated unexpectedly"

    Hi all, this happens about twice per hour and started some days ago, no reconfigs etc that should make it do that as far as I can find. Have been running CU6 for some months without this happening until recently.
    Also getting AppEventID 1007:
    Failed to create or start performance logs with error: System.ArgumentException: Value does not fall within the expected range.
       at PlaLibrary.DataCollectorSetClass.start(Boolean Synchronous)
       at Microsoft.Exchange.Diagnostics.PerformanceLogger.PerformanceLogSet.StartLog(Boolean synchronous)
       at Microsoft.Exchange.Diagnostics.PerformanceLogger.PerformanceLogMonitor.CheckPerflogStatus(). Performance log: ExchangeDiagnosticsPerformanceLog.
    Found this article
    http://blogs.technet.com/b/anya/archive/2014/11/25/microsoft-exchange-diagnostics-service-crashing-post-cu6-upgrade.aspx, but I do not actually understand what the "fix" really is here, many steps are made for Diagnostics buth which
    of those are necessary to take? And I'm not so into exporting/importing those XMLs.. I have only one E2013-server also.
    Hope someone can clarify this. I was thinking of installing CU7 if that might fix it, but I'm not sure if I dare in danger of running into trouble with things not working as they should.
    Thanks,
    -Ray.

    Hi,
    Based on the description of that article, the root issue was due to upgrade. While upgrading to Exchange 2013 CU6, the upgrade did some modifications in the registry hives the ExchangeDiagnosticsDailyPerformanceLog got missing from Task Scheduler, performance
    monitor and was also missing from the location C:\Windows\System32\Tasks\Microsoft\Windows\PLA
    Afterwards he did many troubleshooting steps to this issue.
    Actually we don’t need to export/import templates key to XML file. We can just delete both ExchangeDiagnosticsDailyPerformanceLog and ExchangeDiagnosticsPerformanceLog entries from the above registry location and then reboot server. After rebooting server,
    the new default ExchangeDiagnosticsDailyPerformanceLog will be recreated automatically in the task scheduler and performance monitor.
    Here are my suggested steps for ference:
    Ensure that the templates key are present under
    HKLM\Software\Microsoft\PLA\Templates
    Locate to
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows\PLA\ExchangeDiagnosticsDailyPerformanceLog and delete ExchangeDiagnosticsDailyPerformanceLog and ExchangeDiagnosticsPerformanceLog entries.
    Reboot server and go to registry to check if that two entries have been recreated.
    Check if default ExchangeDiagnosticsDailyPerformanceLog was recreated in task scheduler and performance monitor.
    If this issue persists, please let me know.
    Best Regards.

  • DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

    Hi Board,
    i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
    we drive a 2 node DAG (Location1-Ex1-mb1 
    Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
    Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:          28.09.2012 00:37:17
    Event ID:      2112
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      Location1-Exc1-MB1
    Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
    Followed by
    Log Name:      Application
    Source:        MSExchangeRepl
    Date:         
    01.10.2012 03:33:06
    Event ID:      2024
    Task Category: Exchange VSS Writer
    Level:         Error
    Keywords:      Classic
    User:         
    N/A
    Computer:      Location1-Exc1-MB1
    Description:
    The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
    The backup Application - Symantec Backup Exec 2010 R3 – states, this error
    Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
    Check the Windows Event Viewer for details.
    Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
    Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
    to restart the MS Exchange Replication Service – BUT the mentioned eventID
    8229 isn´t present on any of the both Mailboxservers.
    The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
    This confuses me, since all Backups are normally taken from the passive copy of a Database.
    So my questions to the board are:
    * Does anyone is facing similar issues?
    * Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
    -          * Does someone know the conditions, why shadows copies remain and
    aren´t removed in a proper manner?
    What can cause the circumstance, that only 1 DB is facing such issues?
    Any suggestion is welcome!
    BR
    Markus

    Hi Lenora,
    I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
    those things i´ve all tried now:
    - Backup from passive DB (forced within Symantec Backup Exec)
    - Backup from active DB (forced within Symantec Backup Exec)
    - Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
    - Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
    All those attempts failed.
    But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
    The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
    Backups are working again on all DBs!
    THX for your replys.
    Best regards
    Markus

  • Get-mailboxdatabasecopystatus -identity DBNAME | fl gives errors "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for". DB is mounted and the DB copies are in healthy status.

    We are getting a SCOM alert " Database copy isn''''t keeping up with the changes on the active database copy and has failed."
    When we go to the mailbox server and check we found all the Mailbox DB's are mounted properly and their copies are in healthy state. Further digging to this problem we found that there are no critical events to this DB in the eventviewer.
    When we runt he get-mailboxdatabasecopystatus -identity DBNAME | Fl then in the ErrorMessage section we get error "The Microsoft Exchange Replication service encountered an error while attempting to start a replication instance for . If the copy doesn't
    recover automatically, administrator intervention may be necessary. Error: The directory is not empty."
    ErrorEventID : 4126
    In the event viewer we get a Information event 4114 saying the DB redundancy health check passed and in the details section we get the same error message mentioned above.
    Also we observed that the "MSExchange Replication" counter "Failed" is set to 1 for this perticular DB but is is set to 0 for the other DB's. Tried restarting the MSEXChange replication service but still the "Failed" counter
    is 1 and the SCOM alert is still active.
    The version is Exchange 2010 SP3 UR5
    Any clues???

    Hi,
    From your description, this issue only affect one mailbox datatabase.
    Please use the Update-MailboxDatabaseCopy command to check result.
    If it doesn't work, please dismount your active database copy and check if this is Clean Shutdown, if it's dirty shutdown, please bring to clean shutdown and mount this database copy. Then run the Update-MailboxDatabaseCopy command again to check result.
    Best regards,
    Belinda Ma
    TechNet Community Support

  • Exchange Server 2013 SP1 CU5 - The Microsoft Exchange Replication service VSS Writer encountered an exception

    We have 2 server DAG with a witness all servers are Server 2012 R2.  Both members of the DAG are Exchange 2013 SP1 CU5.
    We haven't seen this until recently, but during a VSS enabled storage snapshot the following errors occur.  All of which are related to MSExchangeRepl and the Exchange VSS Writer.
    Event IDs 2140, 2026, 2028, 2030.
    The errors start with the 2140 seen here:
    The Microsoft Exchange Replication service VSS Writer encountered an exception in function Microsoft::Exchange::Cluster::ReplicaVssWriter::CReplicaVssWriterInterop::PrepareSnapshot. HResult -2147467259. Exception Microsoft.Mapi.MapiExceptionDatabaseError: MapiExceptionDatabaseError:
    Unable execute Prepare on snapshot. (hr=0x80004005, ec=1108)
    Diagnostic context:
        Lid: 1494    ---- Remote Context Beg ----
        Lid: 56264   StoreEc: 0x1388    
        Lid: 46280   StoreEc: 0x454     
        Lid: 1750    ---- Remote Context End ----
        Lid: 59216  
        Lid: 34640   StoreEc: 0x454     
        Lid: 52264  
        Lid: 46120   StoreEc: 0x454     
       at Microsoft.Mapi.MapiExceptionHelper.InternalThrowIfErrorOrWarning(String message, Int32 hresult, Boolean allowWarnings, Int32 ec, DiagnosticContext diagCtx, Exception innerException)
       at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, IExInterface iUnknown, Exception innerException)
       at Microsoft.Mapi.ExRpcAdmin.ProcessSnapshotOperation(Guid mdbGuid, SnapshotOperationCode operationCode, UInt32 flags)
       at Microsoft.Exchange.Cluster.Replay.StoreRpcController.<>c__DisplayClass1c.<SnapshotPrepare>b__1b()
       at Microsoft.Exchange.Cluster.Replay.SafeRefCountedTimeoutWrapper.<>c__DisplayClass2.<ProtectedCallWithTimeout>b__0()
       at Microsoft.Exchange.Data.HA.InvokeWithTimeout.Invoke(Action invokableAction, Action foregroundAction, TimeSpan invokeTimeout, Boolean sendWatsonReportNoThrow, Object cancelEvent)
       at Microsoft.Exchange.Cluster.Replay.SafeRefCountedTimeoutWrapper.ProtectedCallWithTimeout(String operationName, TimeSpan timeout, Action operation)
       at Microsoft.Exchange.Cluster.ReplicaVssWriter.CReplicaVssWriterInterop.SnapshotPrepare(Guid dbGuid, UInt32 flags)
       at Microsoft.Exchange.Cluster.ReplicaVssWriter.CReplicaVssWriterInterop.PrepareSnapshot().

    Hi Julez K,
    According to your description, you could try upgrading to CU6.
    In addition, you could review the Exchange Application (App) Event log and the Exchange System (Sys) Event log for errors , and some related resolutions for your reference.
    http://www.symantec.com/business/support/index?page=content&id=TECH209938
    Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety,
    or suitability of any software or information found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
    Hope it can be helpful.
    Best regards,
    Eric

  • Microsoft Exchange Replication Service keep stopping

    Not sure what is going on here. The replication service keep stopping on one of my servers within the DAG. I cant think of anything different about this server compared to others (anything known at least). This server sits at our DR facility and is the host
    of the 3rd copy to a few of our databases, which primary and secondary ones live at our HQ. The application log reports this every 5-10 seconds
    Watson report about to be sent for process id: 31860, with parameters: E12IIS, c-RTL-AMD64, 15.00.0995.029, msexchangerepl, M.Exchange.Common, M.E.C.H.DatabaseFailureItem.Parse, System.ArgumentOutOfRangeException, fe19, 15.00.0995.012.
    ErrorReportingEnabled: False 
    The system log reports this every 5-10 seconds also:
    The Microsoft Exchange Replication service terminated unexpectedly.  It has done this 1 time(s).  The following corrective action will be taken in 5000 milliseconds: Restart the service.
    I have ran windows update, and it seems that every time I reboot the machine, the shutdown tracker comes up. I think it has something to do with hardware, but no idea where to look next. 

    Hi,
    This issue occurred because Microsoft Exchange Replication Services Was Unable to Write In "Microsoft-Exchange-MailboxDatabaseFailureItems/Operational"
    The fix for the issue will be available in next cumulative update. Meanwhile, please follow the steps below for a workaround to resolve the issue. This workaround is to clear the entries log storing mailbox database failure items.
    On problem server, open command prompt in administrator privileges.
    Run following command to clear the even entries from the log
    Wevtutil.exe cl "Microsoft-Exchange-MailboxDatabaseFailureItems/Operational"
    Best Regards.

Maybe you are looking for

  • Cost  of finished product repetitive manufacturing

    Hi, My clients produces 5 different finshed products always. I want to map the scenario in Repetitive manufacturing. Is it possible in REM to get the actual cost of production of 5 products separately?? fir example can i get cost of finished product

  • Exctract an URL from an HREF?

    I have some javascript, which pops up a separate browser window. All I need to do is call it with the url. How can I extract an url from a jato href, so I can use it in my javascript call? I can't find anything in the HREF javadoc which indicates how

  • Jsp parameters - url problem

    hello, I have a problem with the maximum length of an url. I have to submit a parameter (which is a list of elements) from a jsp to a servlet. But, for IE, there's a maximum length of the url and it doesn't allow a such longer parameter (for netscape

  • ICloud Deleted a ton of contacts and all my contact groups

    I just updated to 10.7.2 today and turned on iCloud. I synced my contacts and for some reason all my groups are now gone and tons of my contact are gone. I think all the contacts that were on groups have been deleted. Please help. I have my address b

  • Metrics analysis

    Hi All, System - Oracle 10.2.0.4 on SOLARIS 10. Application is JDE..(Lot of adhoc queries, lot of batch/ETL jobs at Night, normal OLTP) Using RAID 1+0 In my AWR report for some time I notice the following; 1> High db file parallel read for past few m