SBS2011 workstation auto updates / can IE upgrades be specifically turned off ?

SBS2011 workstation auto updates
I have a weird situation that requires the client pc's to run lower versions of IE and can't use 3rd party browsers (must be IE).  I would rather not turn auto updates off completely but the IE version updates is killing us.
Can the IE upgrades be specifically turned off while allowing the other updates?

there are internet explorer blockers to stop ie9 or 10 from being installed if that helps.
Guzzifrank

Similar Messages

  • I tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?

    i tried updating my ipod, and then it turned off, and then just said connect to itunes, and when i did, it said i had to restore it. so, i restored it, and it did nothing and still said connect to itunes. help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     
    or
    Maybe:
    Restore loop (being prompted to restore again after a restore successfully completes)
    Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
    Next try placing in DFU mode and then restoring.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Then try restoring on another computer.
    Last, make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Since updating to ios6 my 4s keeps turning off.

    Since updating to ios6 my 4s keeps turning off, has 5%  last time had 18% battery and says connect to power, comes straight on with 18% still!

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can i fix this without turning off iCloud?

    My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can I fix this without turning off iCloud?
    I am at a new office that uses Outlook (not Outlook Exchange) which does not sync with my mobile... I just got iCloud set up on my PC to sync my contacts, calendar, reminders, etc... The sync worked (not without flaws, but the other issues seem solvable... I think), so that i can now see all my appointments on both my phone and on my PC. The problem I am having is that iCloud moved all of my calendar items from Outlook into iCloud calendar and now when I send out meeting/calendar invites the recipients may accept them, but the meeting does not get added to their calendar. This is a huge problem and may mean that i need to turn off iCloud.
    Does anyone know how to fix this?
    Thanks!

    I am replying to my own post here as I seem to have fixed the problem.
    I do have some calendars that are shared. Some of those are shared with users who have time zone support turned on. So i activated time zone support on my iphone, then deleted my icloud subscription. I then signed in to icloud again and voila... problem solved.
    It is a weird one as the other calendar views were always fine and when you opened an event that appeared in the wrong day (on list view), the correct date of the event was shown in the information...
    one more bug in a complicated system I guess

  • Did the most recent update and now my TB Display turns off randomly on both my air and mini. I running  TB Firmware Version:     23.6

    did the most recent update and now my TB Display turns off randomly on both my air and mini. I running  TB Firmware Version:
    23.6

    When did you get this firmware version?  My TBD is at 22.2 and the TBD bus is at 23.4.  I thought I had the latest firmware.

  • Can't get shuffle to turn off

    can't get shuffle to turn off, have reset ipod, synced with itunes, everything i can think of.

    How in the world did you figure that out?  I was going crazy trying to get it to turn off.  Should I keep Shake to Shuffle turned off?  If you want it to shuffle do you just reverse the process?  One last thing, what is the little icon on the other side for?  I had to turn it off as well to get shuffle to stop.  Thanks planb.

  • Can't get Filevault to turn off

    I can't get filevault to turn off. I go to system preferences and click turn off and it looks like its about to then its comes up wit a message saying cannot turn filevault off...error...then it says its going to stay on my home folder..I need to turn it off so I can acess my Pro Tools program...also I think that is why some other applications are acting funny...like itunes keeps saying its library is damaged and makes a new one everytime i start the application...also when im on safari it keeps asking about a keychain...

    Hi mom, the best solution would be to create a new admin user account and restore your data from your most recent backup.
    The damaged FileVault image is encrypted data within a disk image file. None of the repair utilities will be able to do much with it if you aren't able to enter your password and have the volume available in its unencrypted form for repairs. So if it won't mount then back-up the sparseimage to DVD or another hard drive just in case technology makes it possible to recover later and get on with your new <empty> user account.
    System Preferences > Accounts > "+" to add a new user.
    Click the Security button on the user account screen and check the box at the bottom "Allow user to administer this computer"
    Because FileVault images are not generally recoverable, you should at least consider disabling it for all the other accounts on the system as well or setup a regular, frequent backup for each sparseimage file.
    Live and learn.

  • My Iphone is disabled and I plugged it into Itunes to restore it but it's saying that I can't do it without turning off "Find My Phone" in my setting, but obviously I can't get into my phone. What do I do?

    My Iphone is disabled and I plugged it into Itunes to restore it but it's saying that I can't do it without turning off "Find My Phone" in my setting, but obviously I can't get into my phone. What do I do?

    www.cloud.com

  • What is this black bar on my screen that  talks, I can't get it to turn off!

    What is this black bar on my screen that talks, I can't get it to turn off! It reads every little link on each screen and I can hardly browse because it will scroll back up to where it is reading. Help me!

    I just figured it out, hallelujah! In universal access I can turn off voice over. Thank you!

  • HT201365 Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How N

    Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How Now?

    and
    Because my first response would be....Oh, sure.....
    Because I am sorry you are having a hassle with the intenet. There is nothing more frustruating than having to deal with a slow response, or a makeshift connection....hope it gets fixed soon!!!
    Your friend,
    GB

  • I was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!

    i was updating to ios7 and my phone turned off and now it wont turn back on. it shows the apple sign but it slowly fades away and so on. Help!

    Hello there, RFJA2211.
    The following Knowledge Base article offers up some great troubleshooting steps for unexpected power off of your iOS device:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT1766 After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.

    After IOS 7.0.4 Updation My ipad 4 started to turn off frequently and i cannot use the ipad morethan 5 minutes, how to resolve this issue.

    Try reset all settings
    Settings>General>Reset>Reset All Settings
    Note: Data will not be affected but settings will be reset.

  • Can't restore iPhone after turning off while doing the iOS 8.0.2 update

    I wanted to do the iOS 8.0.2 update. This didn't work and my iPhone 5 turned off. Now it says that I have to connect ti iTunes. I tried to restore it but it always says that a mistake appeared. Now i can't use my iPhone anymore and i don't know what to do

    it took me 5 hours to get iTunes to sort my phone out!!
    I have an iphone4 I updated to iOS8.2 this ruined my phone. The bloke in Apple store told me to reset my phone. Whilst it was in the reset mode it froze meaning it was a brick! I couldn't get rid of the apple logo and iTunes was not recognising my phone!!
    I changed the USB ports and that appeared to work. BUT once my phone was on it did not ask if I wanted to restore from icloud ...... So I've lost all my settings and text and have no clue how to get them back. My iPhone is like new, which is rubbish coz it took me over a year to get it how I liked it!!

  • When trying to access itunes store after itunes upgrade, windows dep turns off program.  have updated quicktime player

    After newest upgrade to itunes when trying to access itunes store, windows dep turns off program.  Have upgraded Quicktime player.  Can not turn off dep for itunes.

    miniart18 found a solution and posted it on another post.  her solution is to right click on itunes shortcut & pick "run as administrator".  thanks again miniart18!!

  • Why the hell does Firefox automatically update itself after I specifically turned off automatic updates?!?!?!?!??! 3 profiles with all of my bookmarks are gone. Never using this browser again!!!!!!

    <blockquote>Removed profanity. Please read the rules and guidelines at https://support.mozilla.com/en-US/kb/Forum+and+Chat+Rules+and+Guidelines - FF4L</blockquote>
    == Issue
    ==
    I have another kind of problem with Firefox
    == Description
    ==
    == Firefox version
    ==
    3.0.19
    == Operating system
    ==
    PPC Mac OS X 10.4
    == User Agent
    ==
    Mozilla/5.0 (Macintosh; U; PPC Mac OS X 10.4; en-US; rv:1.9.0.19) Gecko/2010031218 Firefox/3.0.19
    == Plugins installed
    ==
    *-Netscape Navigator Default Plug-in
    *Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Java Information.
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
    *Shockwave Flash 10.0 r22
    *The Flip4Mac WMV Plugin allows you to view Windows Media content using QuickTime.
    *DivX Browser Plug-In: Plays DivX video in your browser!
    *Macromedia Shockwave for Director Netscape plug-in, version 10.1.1
    *Java 1.3.1 Plug-in
    *Java 1.3.1 Plug-in (CFM)

    I also have this problem of Firefox updating by itself (also the add-ons) even when I turn off auto-update.
    Sometimes you do not want to update or download a large file; because you're working offline, have a slow connection, or have a very low download allowance etc. Usually the update doesn't work and cause Firefox to crash. After that it cannot be started again. This is with Firefox Portable but I think I've had this problem the normal Firefox. With the portable version I can just back up a single folder but it is still time wasting and annoying.
    I've noticed that when I start Firefox with auto-update turned off from the previous session, it changes the options to auto-update by itself, it also does this periodically. So every time I start Firefox I have to turn off auto-update, and I have to check again from to time, like a few times a day, because Firefox will by itself turn back on the auto-update.

Maybe you are looking for

  • How to create a dynamic fields in the Adobe Interactive form ?....urgent...

    Hi Experts, I'm working on Adobe Interactive form developed in WDP ABAP.( I have successfully config the ADS in my server.) Action: 1. Create two view - first_view and second_view in the WDP ABAP.. 2. In the first_view, there are a input field( named

  • Cisco Prime Infrastructure v2.1 - Delete device fails

    Hi. I'm trying out PI, but I have come across an error. I'm trying to delete a device (a WLC 5508), but I keep getting this error every time I try: Delete Device(s) Failed: 172.29.254.6. Please see log for more information. But there are about 200 lo

  • NDStray.exe - Application Error on Satellite A305-S6916

    Recently, I have begun to experience an error when I first boot my computer: NDStray.exe - Application Error The application failed to initialize properly (0xc0000006). Click OK to terminate the application or The exception unkown software exception

  • Numeric value Problem

    hi, what i m trying to do is as follows: String str = "5.00"; double db = Double.parseDouble(str); then db = 5.0; but i want the double value in two digits means like 5.00. So how can i get the numeric value in two digit if value after decimal is 00

  • Building appication on 64 bit O.S..Performance issue

    Hi all.. I have a web application developed using Struts and EJB. The underlying server is Jboss 4.0.2. Earlier i was building and running my application on 32 bit JVM and 32 bit O.S (windows). But due to performance issues (heap space problems) we d