SC 3.1 + Solaris 10 SPARC + Oracle HA agent + Oracle 10gR2 Compatability

Does the SC 3.1 for Solaris 10 SPARC with its Oracle agent (HA) support Oracle 10gR2 ? I could not find this combination in the release notes supplement for SC 3.1 05/04, 09/04 or 08/05 , can you provide the URL for this support
Many thanks

Thanks again
I searched the docs.sun.com for the SC 3.1 support for Oracle 10gR2 on SPARC I could not find this support I found it only for Solaris x86 , also the support for Solaris 10 SPARC I could not find it
Can you point to the correct release notes or release note supplement that mentions the certification of SC 3.1 for Solaris 10 SPARC also the one the shows the cerification for Oracle 10gR2

Similar Messages

  • How to Reorganize CSM200 Shared Storage in Solaris 10 x86 Oracle 10gR2

    I could use some guidance from those who are more experienced in RAC administration in a Solaris environment with ASM. I have a three-node RAC with Oracle 10gR2 instances on top of Solaris 10 x86 where the shared storage is a Sun CSM200 disk array which looks like a single disk to the rest of the world. I'm not very familiar with the CSM200 Common Array Manager but I do have access to use it.
    During initial setup, I followed the Oracle cookbook and defined a storage slice for each of the following: OCR, OCR mirror, three voting disks, and +DATA, for a total of six slices. I brought up the RAC and we've used it for a couple of weeks.
    This is a Dev and QA environment, so it changes pretty fast. The new requirement is to add a +FRA and to add a mount point for a file system on the shared storage, so that all three Oracle instances can refer to the same external table(s).
    However, I've already used all the available slices in the VTOC on the shared logical drive. I'm not sure how to proceed.
    1) Is it necessary to use the CAM to create two logical disks out of the single existing logical disk?
    2) If so, how destructive is that? I don't need to keep the contents of the database, but I do not want to reinstall CRS or ASM or the DB instances.
    3) Is it possible to combine the OCR and its mirror on the same slice, thus freeing a slice for reuse?
    4) Is it possible to combine all three voting disks on the same slice, thus freeing two slices for reuse?
    Edited by: user12006221 on Mar 29, 2011 3:30 PM
    Another question: Under 10.2.0.4, is it possible for the OCR and voting disks to be managed by ASM? I know it would be possible under 11g, but that's not an option as I am trying to match a customer's environment and they aren't going to 11g any time real soon.

    What you see is what happens when the Java runtime running on Solaris 10 x86 tries to load a library which is compiled for SPARC.
    Because of the native parts in SAP GUI for Java, compilations and installers are required for each OS - HW combination.
    The supported platforms can be seen in SAP note 954572. For Solaris only SPARC is currently supported.
    Because of the effort needed for compiling, testing, support etc. it is required to focus on OS - HW combinations widely used on desktop machines and Solaris 10 on x86 currently does not seem to be one of those.

  • Oracle 10gR2 Patch Set 3  - Clustering Service (CSS) failed to start

    Hi ,
    we are using Solaris 10 containers. Oracle 10gR2 installation done with ASM in Non-global zone and it was successful, after applying patch set 3 CSS service unable to start and won't generate any error message.
    OS : solaris 10
    DB : Oracle 10gR2
    any pointer will help us to resolve this issue.
    Regards,
    Sachin

    Hi,
    Cause
    1) This is a LANG problem. So this can be confirmed by tracing the init.cssd script (executed by the init/inittab), as follow:
    h1:3:respawn:/etc/init.d/init.cssd run >/var/log/init-cssd.run 2>&1 </var/log/init-cssd.run
    2) /var/log/init-cssd.run log extract:
    TZ=
    + export TZ
    LANG=
    + export LANG
    + /bin/who -b
    + exit 0
    BOOTID= . system boot srp 7 16:44
    + /bin/cat /var/opt/oracle/scls_scr/db4/root/cssrun
    RUNID= . system boot Aug 7 16:44
    + [ . system boot srp 7 16:44 != . system boot Aug 7 16:
    44 ]
    + [ . system boot Aug 7 16:44 = startstack ]
    + exit 3
    STATUS=3
    + [ 3 != 0 ]
    + exit 3
    + [ 3 != 0 ]
    + /bin/sleep 30
    Solution
    1) Set the LANG environment variable in /etc/init.d/init.cssd script (in GETBOOTID section) to cs_CZ.ISO8859-2:
    # Set a null language id. GETBOOTID can also be sensitive to the language
    # codes, when init.cssd is run in a user shell compared to being run
    # under init. Setting a blank language code should guarantee consistency.
    LANG=cs_CZ.ISO8859-2
    2) Then CSS will start.
    $>crsctl check crs
    CSS appears healthy
    Cannot communicate with CRS
    Cannot communicate with EVM
    $>ps -fea | grep ocssd.bin | grep -vi grep
    oracle 407 1 0 Aug 13 ? 3:50 /oracle2/V10g2/bin/ocssd.bin
    Best regards,
    Rafi.
    http://rafioracledba.blogspot.com/

  • Oracle 10g R2 installation on sun solaris 10 Sparc machine

    Hi there,
    I encountered the following problem during oracle 10g R2 installation on sun solaris 10 Sparc machine
    Error encountered:
    Using paramFile: /u01/Oracle/10gr2_db_sol/install/oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10
    Passed
    Checking Temp space: must be greater than 250 MB. Actual 2266 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 2335 MB Passed
    Checking monitor: must be configured to display at least 256 colors Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.
    Some requirement checks failed. You must fulfill these requirements before
    continuing with the installation,at which time they will be rechecked.
    Continue? (y/n) [n]
    The following were the steps taken before encountering the above error
    1. logged into a workstation
    2. From its xterm terminal I logged to the oracle server via ssh oracle@ip
    3. keyed in the following at the command prompt
    DISPLAY=machine_name:0.0; export DISPLAY
    4. executed the following from the command prompt
    ./runInstaller
    Note: when executing the ./runInstaller, the preinstallation checking just hangs at Checking monitor: must be configured to display at least 256 colors. But the log file shows it failed during preinstallation checking as shown in Error encountered
    Please help me with this problem.
    Thank you
    Ravindran Kanniah

    It is because of UNIX shell. I also faced this error during installation.
    First check your shell by the following command.
    $ echo $SHELL
    Then select the below.
    For csh shell
    $ setenv DISPLAY 192.168.1.128:0.0
    $ export DISPLAY
    For sh,ksh and bash
    $ DISPLAY=192.168.1.128:0.0
    $ export DISPLAY
    After you do this check the value of DISPLAY variable.
    $ echo $DISPLAY
    If the DISPLAY variable is set then run ./runInstaller.
    One advice: Keep a complete log of your terminal session. This will help you in future :)
    -aijaz

  • Problems to install Oracle SOA Suite 11g on Solaris 10 SPARC-64

    I'm trying to install the Oracle SOA Suite 11g on Solaris 10 SPARC-64 but I´m having problems.
    I have already installed the JDK 1.6_11 for 64 bits and I use it for the SOA installation, the instruction is:
    ./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
    I'm providing the absolute path to ensure take the correct JDK (JDK 64 bits).
    But I get the following error:
    bash-3.00$ ./runInstaller -jreLoc /export/home/adminsoa/Java1.6_11/jdk1.6.0_11
    Starting Oracle Universal Installer...
    Checking if CPU speed is above 300 MHz. Actual 1500 MHz Passed
    Checking Temp space: must be greater than 150 MB. Actual 5291 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 39311 MB Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-01-26_03-17-44PM. Please wait ...bash-3.00$ Log: /home/oracle/oraInventory/logs/install2010-01-26_03-17-44PM.log
    [ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
    [EXCEPTION]:java.lang.reflect.InvocationTargetException
    I reviewed the log install2010-01-26_03-17-44PM.out and displays the following:
    Adding /tmp/OraInstall2010-01-26_03-17-44PM for deletion.
    Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/soawl.jar
    Adding to classpath:file:/tmp/OraInstall2010-01-26_03-17-44PM/ext/jlib/template.jar
    [email protected]creenRes
    java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: ld.so.1: java: fatal: /tmp/OraInstall2010-01-26_03-17-44PM/oui/lib/solaris/liboraInstaller.so: wrong ELF class: ELFCLASS64 (Possible cause: architecture word width mismatch)
         at java.lang.ClassLoader$NativeLibrary.load(Native Method)
         at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1778)
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1674)
         at java.lang.Runtime.load0(Runtime.java:770)
         at java.lang.System.load(System.java:1005)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:402)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
         at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
         at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
         at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
         at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
         at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
         at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
         at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
         at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
    java.lang.reflect.InvocationTargetException
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at oracle.as.install.engine.InstallEngine.launchModule(InstallEngine.java:508)
         at oracle.as.install.engine.InstallEngine.processAndLaunchModules(InstallEngine.java:462)
         at oracle.as.install.engine.InstallEngine.startOperation(InstallEngine.java:415)
         at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(OiocOneClickInstaller.java:446)
    Caused by: java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
         at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1709)
         at java.lang.Runtime.loadLibrary0(Runtime.java:823)
         at java.lang.System.loadLibrary(System.java:1030)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.loadNativeLib(OiipuUnixOps.java:420)
         at oracle.sysman.oii.oiip.osd.unix.OiipuUnixOps.<clinit>(OiipuUnixOps.java:125)
         at oracle.as.install.engine.modules.statistics.util.SysInfo.getAvailableMemory(SysInfo.java:161)
         at oracle.as.install.engine.modules.statistics.element.AvailableMemoryElement.<init>(AvailableMemoryElement.java:39)
         at oracle.as.install.engine.modules.statistics.standard.StandardElementLocator.loadElements(StandardElementLocator.java:63)
         at oracle.as.install.engine.modules.statistics.boot.ProfilerInitializer.initializeProfile(ProfilerInitializer.java:82)
         at oracle.as.install.engine.modules.statistics.Statistics.launchModule(Statistics.java:284)
         ... 8 more
    [ERROR]: Installer has encountered an internal Error. Contact Oracle support with details
    [EXCEPTION]:java.lang.reflect.InvocationTargetException
    I think that the error would be caused by the JDK version with which try to initializing.
    Anyone have any idea about the possible error? Thanks in advance.

    Hi, I encourage you to try to use the generic installer at: %SOA_INSTALLER_DIR%/Disk1/runInstaller. Because if you are using the runInstaller at %SOA_INSTALLER_DIR%/Disk1/install/solaris it will lead to that problem in some cases.

  • Messages in the OS logs of Oracle Solaris on SPARC (64-bit)

    One of my Customer is getting following messages in the OS logs of the Oracle Solaris on SPARC (64-bit) machine.
    Feb 2 01:07:33 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
    Feb 2 03:07:43 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
    Feb 2 03:07:43 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
    Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
    Feb 2 05:07:52 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
    Feb 2 05:07:52 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
    Feb 2 07:08:08 ndc-m9k-2-r1 scsi: [ID! 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
    Feb 2 07:08:08 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
    Feb 2 09:08:25 ndc-m9k-2-r1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
    Feb 2 09:08:25 ndc-m9k-2-r1 Invalid ioctl opcode = 0x403
    There is a note # 833665.1 on this which states "The issue is caused by the Host Storage metrics collected by the agent" and also a Patch 8477122 has been created for this issue.
    However, there is nothing mention in the Note # 833665.1 about the following one message.
    Feb 2 04:07:34 ndc-m9k-2-r1 oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call
    Can anyone please tell me
    1. whats the significance of the "oracle[7332]: [ID 566193 user.error] n2a get_local_info: ioctl (get interface flags): Interrupted system call" message in the OS log?
    2. Does this message get stops on applying of patch # 8477122 ?
    Thank you,
    Bhavin

    There are a number of known issues with the 10g agent on Solaris and patches are available. I assume you are running the 10.2.0.5 agent since you reference patch 8477122. If this is a brand new agent installation i would start with applying the latest PSU update which contains many related fixes. If you are still getting the error after this, open an SR with Oracle Support with your specific error message.

  • How can i migrate from oracle 10gR2 Linux x68 to SPARC Solaris 10?

    Hi friends...
    I have a 30GB database and need to migrate from Linux x86 to Solaris 10 SPARC.
    Solaris 10 SPACR come this monday, then it's clean.
    How i proceed?
    Rod.

    Hi, good article Citrus, also you can read the next documentation for some detail and technical information about Transportable Tablespaces.
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/tspaces.htm#sthref1322
    Regards.

  • Solaris 10 Sparc and Oracle 11g DB with GG

    Hi,
    I have Solaris system with Solaris 10 Sparc and Oracle 11g DB.
    From the Golden gate download list I downloaded the Golden Gate for Oracle 11g and Solaris 10.
    I tried to Install but I am getting the following error..
    $ ldd ggsci
    ldd: ggsci: ELF machine type: EM_AMD64: is incompatible with system
    Can you please let us know which might be the best golden gate software for us.

    Vinod wrote:
    I have Solaris system with Solaris 10 Sparc and Oracle 11g DB.
    From the Golden gate download list I downloaded the Golden Gate for Oracle 11g and Solaris 10.
    I tried to Install but I am getting the following error..
    $ ldd ggsci
    ldd: ggsci: ELF machine type: EM_AMD64: is incompatible with system
    Can you please let us know which might be the best golden gate software for us.Possibly the solaris x86_64 build was downloaded, instead of the build for solaris sparc? (I think all of our current solaris builds are 64-bit.) It's almost certainly a download / OS mismatch.
    What exact file did you download (what's the file name, before unzipping it), and on your solaris box, what's the result of => "uname -a" and/or "isainfo -v" ...? Just make sure the downloaded file matches what the box is running...
    Btw, not that it matters in this case, but if you were hypothetically running a 32-bit database on a 64-bit OS, you'd need a 32-bit build of GoldenGate. But I don't know why you'd do that. (And that's not the problem here.)

  • Oracle E-Business Suite 12.1.3 is certified on Oracle Solaris on SPARC (64-bit) 11.2 ?

    Hi,
    Is Oracle E-Business Suite 12.1.3 is certified on Oracle Solaris on SPARC (64-bit) 11.2 ? on certifications it shows only 1 Version (11).

    Yes it is -- R12.1.1 : Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Oracle Solaris on SPARC (64-bit) (Doc ID 761568.1).
    Please note Oracle Database 11gR2 (11.2.0.3 or higher) is required for EBS 12.1 on Solaris 11.
    Thanks,
    Hussein

  • REP-3000: An internal error occured starting Oracle Toolkit Solaris 10 SPARC

    I am running WL 10.3.6.0 with Forms/Reports 11.1.2.1.0 on a Solaris SPARC 10 64-bit box, specifically a T4.
    Brand new install of Solaris 10 with only Forms/Reports installed as the user "oracle".
    When I run rwbuilder.sh I get the dreaded REP-3000 error.  I currently have an SR opened with Oracle but its taking forever and I've scoured the net for many different fixes which do not work.  Forms Builder does work fine however.
    Some things I have checked and/or changes I have made:
    DISPLAY - set properly.  I use ReflectionsX to get to my server, I can run xclock also, I've even tried xhost+.
    I've tried running rwbuilder.sh direct at the console to make sure its not a ReflectionsX issue, same error.
    NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
    I've done an ldd on "rwbuilder" to make sure the binary's dependencies were met, all fulfilled with no problems.
    Updated reports.sh:
    REPORTS_DEFAULT_DISPLAY=NO
    DISPLAY=(updated with my direct IP:0.0)
    Relinked reports builder.
    At this point I'm stumped.  Anyone actually have Reports Builder working on a Solaris 10 SPARC box or am I poineering this?  LOL

    REPORTS_DEFAULT_DISPLAY=NO is correct on AIX
    Take a look at http://download-uk.oracle.com/docs/html/B14048_02/pbr_rfap.htm#sthref3930
    To revert to the dependency on DISPLAY and use screen fonts (old font look up algorithm):
    * Set REPORTS_DEFAULT_DISPLAY=NO
    * Remove the screenprinter.ppd entry in the uiscreenprint.txt file.
    * Set the DISPLAY variable to the active X-Windows display surface.
    Regards,
    Martin

  • Selective export failing - Solaris Sparc - Oracle 10g

    HI Gurus,
    I am trying to export selective data from one of my prod database tables. But not succeeding. I was keep on trying for the past 2 hours.
    Could anybody please verify the script and let me know what was wrong in it. Thanks in advance
    OS : SOLARIS SPARC
    ORACLE - 10G
    Query --> WHERE E3RECV_DT LIKE '201305%' (I need to export this query data)
    Below Script i am using
    ===============
    exp E3USER@SGEBAPU2 statistics=none consistent=n buffer=100000000 file=exp_pipe_file TABLES=IFDATA query=\"WHERE E3RECV_DT LIKE '201305\%'\" log=PGTB_IFDATA_conditional.log

    Nagaraju P wrote:
    HI Gurus,
    I am trying to export selective data from one of my prod database tables. But not succeeding. I was keep on trying for the past 2 hours.
    Could anybody please verify the script and let me know what was wrong in it. Thanks in advance
    OS : SOLARIS SPARC
    ORACLE - 10G
    Query --> WHERE E3RECV_DT LIKE '201305%' (I need to export this query data)
    Below Script i am using
    ===============
    exp E3USER@SGEBAPU2 statistics=none consistent=n buffer=100000000 file=exp_pipe_file TABLES=IFDATA query=\"WHERE E3RECV_DT LIKE '201305\%'\" log=PGTB_IFDATA_conditional.logconsider placing everything on Control file to avoid fighting with the command line interpreter.
    my car is not succeeding.
    Tell me how to make my car go.
    use COPY & PASTE so we can see what you do & exactly how Oracle responds.
    How do I ask a question on the forums?
    SQL and PL/SQL FAQ

  • Oracle 10gR2 installation problem on Solaris (sparc-64 bit)

    Hi All,
    I am unable to install Oracle 10gR2 on Solaris, I cannot understand what is wrong could u anybody help me that,
    Regards
    Harpreet Singh

    I also have a similar problem, when I insert the key in my car sometimes it does not start. I cannot understand what is wrong could you help me?
    Otherwise, It's been raining lately and our crystal ball's are somewhat foggy; therefore we cannot guess what is you problem.

  • Cannot create guest virtual machine with Solaris 10 SPARC in Oracle VM 2.2

    Dear All,
    I try many times to create guest virtual machine with Solaris 10 SPARC but not get success.
    When I created it already and then I start the Power On button, it run normally but the Console button cannot click on (hide). After that the virtual machine running abit then it change status to Powered Off.
    Please kindly give advice for this.
    Thanks and regards,
    Heng

    I storgly doubt, VMware player is available for Solaris 10 SPARC version.
    Solaris 10 is not a comercial product, like ubuntu, windows, MAC etc... It's really for a server.
    That's the reason still I hate Solaris 11 as a desktop. You have very limited product/software.... This may change for Solaris 11, but U can't expect one for Solaris 10.

  • WLS 10.3.0.0 Solaris SPARC and DBMS Oracle 10gR2 connection pooling issue

    Hi all,
    we are currently testing Weblogic Server 10.3.0.0 in order to migrate our production system from WLS 8.1 to it.
    While testing the new setup, we encountered some strange behaviour of the connection pooling within WLS.
    We configured a XA-Connection pool to our DB (Oracle 10gR2) by using
    a) the Oracle XA-thin-driver delivered within WLS 10.3.0.0
    and alternatively
    b) the Oracle 11.2.0.2 OCI-driver of the Oracle 11g database client.
    We´ve got the same issue with both variants. We defined an initial capacity of 5 connections and a maximum capacity of 30 connections.
    Our application is running flawlessly using the connection pool, but the amount of active sessions between the application server and the database server is increasing rapidly and the maximum capacity is exceeded. We are seeing up to multiple hundreds of sessions from the application server to our database server. Obviously the connections aren´t cleaned up.
    We are using the following settings for the JDBC-Connection:
    initial capacity = 5
    max. capacity = 30
    Capacity increment = 1
    Statement cache type = LRU
    Statement cache size = 10
    Test connections on reserve = true
    Test frequency = 120
    Test table name = "sql select 1 from dual"
    seconds to trust an idle pool connection = 10
    shrink frequency = 0
    connecttion creation retry frequency = 120
    login delay = 0
    incative connection timeout = 10
    max. waiting for connection = 2147483647
    connection reserve timeout= = -1
    Ignare in-use connections = true
    pinned-to-thread = false
    remoce infected connections enabled = true
    Does anyone have an idea how to track/solve this issue?
    Kind regards
    Marc

    Hi Joe,
    we´ve tested with the thin driver using an initial capacity of 5 and a maximum capacity of 15. During our tests (in a very short time period) the maximum capacity has not been exceeded. But we saw some exceptions in the managed server logfile which made us curious.
    When these exceptions are occuring, a new connection to the database server is established. We are seeing for a short time a total count of 6 connections which is immediately decreasing to the initial capacity of 5. We will do some further testing over the next hours and monitor the connection usage.
    The connection we are dealing with is the one called "ZDB2".
    This is an excerpt of the logfile:
    ####<18.10.2010 19:45 Uhr MESZ> <Debug> <JDBCConn> <SERVER-NAME> <MANAGED SERVER NAME> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <BEA1-02F7EA174F1D84653A69> <> <1287423940610> <BEA-000000> <java.lang.Exception: Pinned: autoCommit=true,enabled=true,isXA=true,isJTS=false,vendorID=0,connUsed=true,doInit=false,'null',destroyed=false,poolname=ZDB2,appname=null,moduleName=null,connectTime=177,dirtyIsolationLevel=false,initialIsolationLevel=2,infected=true,lastSuccessfulConnectionUse=1287423940605,secondsToTrustAnIdlePoolConnection=10,currentUser=java.lang.Exception
         at weblogic.jdbc.common.internal.ConnectionEnv.setup(ConnectionEnv.java:308)
         at weblogic.common.resourcepool.ResourcePoolImpl.reserveResource(ResourcePoolImpl.java:314)
         at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:427)
         at weblogic.jdbc.common.internal.ConnectionPool.reserve(ConnectionPool.java:316)
         at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:93)
         at weblogic.jdbc.common.internal.ConnectionPoolManager.reserve(ConnectionPoolManager.java:61)
         at weblogic.jdbc.jta.DataSource.getXAConnectionFromPool(DataSource.java:1473)
         at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1272)
         at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:425)
         at weblogic.jdbc.jta.DataSource.connect(DataSource.java:382)
         at weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSource.java:338)
         at org.hibernate.connection.DatasourceConnectionProvider.getConnection(DatasourceConnectionProvider.java:69)
         at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:423)
         at org.hibernate.jdbc.ConnectionManager.getConnection(ConnectionManager.java:144)
         at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:139)
         at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1547)
         at org.hibernate.loader.Loader.doQuery(Loader.java:673)
         at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:236)
         at org.hibernate.loader.Loader.doList(Loader.java:2220)
         at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2104)
         at org.hibernate.loader.Loader.list(Loader.java:2099)
         at org.hibernate.hql.classic.QueryTranslatorImpl.list(QueryTranslatorImpl.java:912)
         at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:172)
         at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1121)
         at org.hibernate.impl.QueryImpl.list(QueryImpl.java:79)
         at org.hibernate.impl.AbstractQueryImpl.uniqueResult(AbstractQueryImpl.java:811)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderPersistenceGenerated.findByPrimaryKey(OrderPersistenceGenerated.java:45)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceImplStandard.findOrderByPrimaryKey(OrderManagementServiceImplStandard.java:1356)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceTransactionHandler.findOrderByPrimaryKeyTx(OrderManagementServiceTransactionHandler.java:830)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceSessionBean.findOrderByPrimaryKey(OrderManagementServiceSessionBean.java:1276)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementEJB_yb2dzq_ELOImpl.findOrderByPrimaryKey(OrderManagementEJB_yb2dzq_ELOImpl.java:19812)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceApplicationProxy.findOrderByPrimaryKey(OrderManagementServiceApplicationProxy.java:1289)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceTransactionHandler.findOrderByPrimaryKey(OrderManagementServiceTransactionHandler.java:823)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceImplStandard.findOrderByPrimaryKey(OrderManagementServiceImplStandard.java:1341)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceTransactionHandler.findOrderByPrimaryKeyTx(OrderManagementServiceTransactionHandler.java:816)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceSessionBean.findOrderByPrimaryKey(OrderManagementServiceSessionBean.java:1255)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementEJB_yb2dzq_ELOImpl.findOrderByPrimaryKey(OrderManagementEJB_yb2dzq_ELOImpl.java:7332)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceApplicationProxy.findOrderByPrimaryKey(OrderManagementServiceApplicationProxy.java:1266)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceTransactionHandler.findOrderByPrimaryKey(OrderManagementServiceTransactionHandler.java:809)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceImpl.publishOrder(OrderManagementServiceImpl.java:1636)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceImpl.savePublishedOrder(OrderManagementServiceImpl.java:1606)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceTransactionHandler.savePublishedOrderTx(OrderManagementServiceTransactionHandler.java:3467)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceSessionBean.savePublishedOrder(OrderManagementServiceSessionBean.java:5272)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementEJB_yb2dzq_EOImpl.savePublishedOrder(OrderManagementEJB_yb2dzq_EOImpl.java:3263)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementEJB_yb2dzq_EOImpl_WLSkel.internalInvoke2(Unknown Source)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementEJB_yb2dzq_EOImpl_WLSkel.internalInvoke1(Unknown Source)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementEJB_yb2dzq_EOImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
         at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
         at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    ,currentThread=Thread[[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)',5,Pooled Threads],lastUser=null,currentError=null,currentErrorTimestamp=null,JDBC4Runtime=true,supportStatementPoolable=true,needRestoreClientInfo=false,defaultClientInfo={} is set to be refreshed
         at weblogic.jdbc.common.internal.ConnectionEnv.setRefreshNeeded(ConnectionEnv.java:518)
         at weblogic.jdbc.wrapper.Connection.getVendorConnection(Connection.java:292)
         at de.dpcom.persistence.hibernate.BinaryBlobType.nullSafeSet(BinaryBlobType.java:109)
         at org.hibernate.type.CustomType.nullSafeSet(CustomType.java:146)
         at org.hibernate.persister.entity.AbstractEntityPersister.dehydrate(AbstractEntityPersister.java:1997)
         at org.hibernate.persister.entity.AbstractEntityPersister.update(AbstractEntityPersister.java:2371)
         at org.hibernate.persister.entity.AbstractEntityPersister.updateOrInsert(AbstractEntityPersister.java:2307)
         at org.hibernate.persister.entity.AbstractEntityPersister.update(AbstractEntityPersister.java:2607)
         at org.hibernate.action.EntityUpdateAction.execute(EntityUpdateAction.java:92)
         at org.hibernate.engine.ActionQueue.execute(ActionQueue.java:248)
         at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:232)
         at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:140)
         at org.hibernate.event.def.AbstractFlushingEventListener.performExecutions(AbstractFlushingEventListener.java:298)
         at org.hibernate.event.def.DefaultFlushEventListener.onFlush(DefaultFlushEventListener.java:27)
         at org.hibernate.impl.SessionImpl.flush(SessionImpl.java:1000)
         at APPNAME-ROOT-PATH.components.customermanagement.biz.CertificatePersistenceGenerated.updateCertificate(CertificatePersistenceGenerated.java:116)
         at APPNAME-ROOT-PATH.components.customermanagement.biz.CustomerManagementServiceImplStandard.updateCertificate(CustomerManagementServiceImplStandard.java:1282)
         at APPNAME-ROOT-PATH.components.customermanagement.biz.CustomerManagementServiceTransactionHandler.updateCertificateTx(CustomerManagementServiceTransactionHandler.java:711)
         at APPNAME-ROOT-PATH.components.customermanagement.biz.CustomerManagementServiceSessionBean.updateCertificate(CustomerManagementServiceSessionBean.java:1104)
         at APPNAME-ROOT-PATH.components.customermanagement.biz.CustomerManagementEJB_ap2i9a_ELOImpl.updateCertificate(CustomerManagementEJB_ap2i9a_ELOImpl.java:19199)
         at APPNAME-ROOT-PATH.components.customermanagement.biz.CustomerManagementServiceApplicationProxy.updateCertificate(CustomerManagementServiceApplicationProxy.java:1101)
         at APPNAME-ROOT-PATH.components.productionresultprocessing.biz.ProductionResultProcessingServiceImpl.publishCertificate(ProductionResultProcessingServiceImpl.java:1131)
         at APPNAME-ROOT-PATH.components.productionresultprocessing.biz.ProductionResultProcessingServiceTransactionHandler.publishCertificateTx(ProductionResultProcessingServiceTransactionHandler.java:298)
         at APPNAME-ROOT-PATH.components.productionresultprocessing.biz.ProductionResultProcessingServiceSessionBean.publishCertificate(ProductionResultProcessingServiceSessionBean.java:517)
         at APPNAME-ROOT-PATH.components.productionresultprocessing.biz.ProductionResultProcessingServiceSessionBean_yaua6q_ELOImpl.publishCertificate(ProductionResultProcessingServiceSessionBean_yaua6q_ELOImpl.java:1804)
         at APPNAME-ROOT-PATH.components.productionresultprocessing.biz.ProductionResultProcessingServiceApplicationProxy.publishCertificate(ProductionResultProcessingServiceApplicationProxy.java:471)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceImpl.publishCertificate(OrderManagementServiceImpl.java:1825)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceImpl.publishOrder(OrderManagementServiceImpl.java:1664)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceImpl.savePublishedOrder(OrderManagementServiceImpl.java:1606)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceTransactionHandler.savePublishedOrderTx(OrderManagementServiceTransactionHandler.java:3467)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementServiceSessionBean.savePublishedOrder(OrderManagementServiceSessionBean.java:5272)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementEJB_yb2dzq_EOImpl.savePublishedOrder(OrderManagementEJB_yb2dzq_EOImpl.java:3263)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementEJB_yb2dzq_EOImpl_WLSkel.internalInvoke2(Unknown Source)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementEJB_yb2dzq_EOImpl_WLSkel.internalInvoke1(Unknown Source)
         at APPNAME-ROOT-PATH.components.ordermanagement.biz.OrderManagementEJB_yb2dzq_EOImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
         at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
         at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    >
    ####<18.10.2010 19:45 Uhr MESZ> <Info> <JDBC> <SERVER-NAME> <MANAGED SERVER NAME> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1287423940797> <BEA-001072> <Connection for XA pool "ZDB2" created.>
    ####<18.10.2010 19:45 Uhr MESZ> <Info> <JDBC> <SERVER-NAME> <MANAGED SERVER NAME> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1287423940808> <BEA-001132> <Initialized statement cache of size "10" for connection in pool "ZDB2".>
    ####<18.10.2010 19:45 Uhr MESZ> <Info> <Common> <SERVER-NAME> <MANAGED SERVER NAME> <[ACTIVE] ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1287423940808> <BEA-000628> <Created "1" resources for pool "ZDB2", out of which "1" are available and "0" are unavailable.>
    Any suggestions?
    Kind regards
    Marc

  • Problem with installation application server 10g on Solaris 10 sparc

    Hello all.
    Help me, please.
    I'm trying to install Oracle aplication server 10.0.1.2.0.2 on Solaris 10 sparc.
    Server - Sun Fire v210.
    When i install oracle infrastructure(metadata repository and identify management),
    i have a problem - on first step of configuration "end of communication channel".
    Failed
    Anybody know, how solve this problem?
    Sorry for my english.

    There is known bug in installing Oracle10gAS infra. You have to apply the following note during the installation.
    see MetaLink Note:330016.1 for current AS 10.1.2 installation requirements for Solaris 10.
    Regards,
    Amir

Maybe you are looking for

  • Inbound Idoc type for posting Non-PO Invoice

    Hi, I am looking for an inbound Idoc type to post Non-PO Invoice.  The Idoc types INVOIC01 and INVOIC02 helps me to post the invoice with reference to PO.  But I am looking for the Idoc type to post the invoices without reference to PO i.e., For exam

  • I would like to create chapters within my footage for Scene selection on the DVD menu

    I have edited footage using FCPX and exported it to allow me to use it in IDVD. I now would like to set chapter markers so that the DVD menues allow for scene selection. I believe that I may have to do this in FCPX before exporting it Can you tell me

  • Mac connects then drops wireless connection after startup

    Hi, I have a strange problem.  I recently purchased a new MBP.  My old MBP didn't have any problems with the router, but my new one, after coming out of sleep, will be connected to the internet for a couple of seconds, then drop it like it's searchin

  • Which Crystal Edition to use?

    Post Author: marian_nextdoor CA Forum: Exporting Hi friends! Any assistance would be greatly appreciated. I'm not sure which version(s) of crystal I require. I developed the reports in crystal. I want the end user (other office peers) to be able to a

  • Query slow on RAC

    Hi experts process is running slow on 2 node RAC , takes 120sects On single instance takes 28 secs both are on 11.2.0.3.0 same configuration in terms on memory and init.ora paramters which logs, parameters to look on RAC thanks