SC 3.2 HA NFS error messages

Hello,
my HA NFS SC3.2 produces zillions of error messages :
Feb 12 23:54:38 myhost SC[SUNW.nfs:3.2,myrg,myrg-nfs,nfs_daemons_probe]:
[ID 176151 daemon.error] Unable to lookup nfs:nfs_server from kstat:
No such file or directoryPlease help me to fix the problem.
TIA,
-- leon

Actually I am surprised that it works so far for you
:-) I would have expected more problems.I am glad I prepared you a good surprise :)
As you know Sun Cluster has quite some components
living in kernel space, and while within a Solaris
version (like S10) certain apis are guaranteed to
stay stable, with going to the next release some can
change - thus need a new set of binaries compiled for
that version.
It is a bit like running the S9 binaries on a S10
system. The only luck you seem to have is that not
enough changed within nevada to break it at a more
disturbing point yet (like a panic while trying to
boot).Again - I am well aware about all these aspects.
>
The data service for nfs consists also of several
compiled binaries, and the code does also check some
kstat values. Obvioulsy this interface changed, since
it does create the error message you see.I was sure that somebody from SC staff is aware what's going on in OpenSolaris (aka Nevada) and will send me a hint. Maybe my post didn't get to the right person or - these two areas have no connections.
>
So I understand that zfs works faster/better for you,
but you trade it against stabability. This might be
ok for development, but I would not choose it for
production.I know you wouldn't.
>
Of course feel free to do it anyway - as long as you
know what you are doing.Anyway any idea on finding the problem will be appreciated.
Thanks,
-- leon
>
Greets
Thorsten

Similar Messages

  • Files moving to NFS error folder - Could not insert message into duplicate check table

    Hi Friends
    Have anyone faced this error, could suggest me why.
    The CSV Files failed on Sender Channel and moves to NFS error path  and in the log it says as below.
    Error: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Could not insert message  into duplicate check table. Reason: com.ibm.db2.jcc.am.SqlTransactionRollbackException: DB2 SQL Error

    Hi Uma - is that a duplicate file? have you enabled duplicate file check in sender channel?
    please check if the below note is applicable
    1979353 - Recurring TxRollbackException with MODE_STORE_ON_ERROR stage configuration

  • NFS mount error messages on Solaris 8; is there a patch?

    We recently purchased an EMC Celerra NS80 to serve as a front end to our Centerra archive solution. On a Solaris 8 box I've been seeing a large number of NFS errors in the /var/adm/messages file relating directly to the datamover on the NS80. I've tried everything I can think of from the array side of the house to no avail. EMC states there is fix for this problem, patch 113318-12, but according to the patch notes this is for an NFS problem with Solaris 9.
    The error is causing sporadic performance issues when our end users attempt to pull up the data that resides on the Celerra NFS mount, so I would really like to get it resolved. The specific error message is:
    NFS server DATAMOVER1 not responding still trying
    NFS server DATAMOVER1 ok
    The messages of not responding and ok tend to relate every few seconds to 3-5 minutes delay. Our database vendor insists something on the NS80 is introducing this error, but I cannot find anything to change to clear this up.
    Any input would be greatly appreciated.
    Thanks.

    SunOS www02.unix 5.10 Generic_127128-11 i86pc i386 i86pc
    10:58am up 22:51, 4 users, load average: 2.16, 2.26, 2.26
    /export/www
    cache hit rate: 99% (111069900 hits, 6674 misses)
    consistency checks: 459000 (458945 pass, 55 fail)
    modifies: 0
    garbage collection: 0
    /export/zero
    cache hit rate: 94% (2089349 hits, 110629 misses)
    consistency checks: 1497690 (1497075 pass, 615 fail)
    modifies: 0
    garbage collection: 0
    /export/saba
    cache hit rate: 97% (7677577 hits, 174056 misses)
    consistency checks: 10809059 (10801491 pass, 7568 fail)
    modifies: 0
    garbage collection: 0
    So 1 day uptime, that is much better. We rebooted it for mirroring setup, and found that cachefs needs to fsck before it comes up. Can I not simply have it start afresh rather than attempt to keep cache directory? (Obviously I can, but I mean in a boot-friendly manner)

  • Error message when connecting ZLINUX/DB2 with Oracle

    Hi BW gurus,
    We are upgrading to BI 7.0 & ECC 6.0.  We are on the operating system: ZLINUX/DB2 Operating System.
    The ZLINUX/DB2 OS needs to be connected to the Oracle system through DB connect. As there is no direct connection between these two,
    have to install an application server client compatible to windows.
    When trying to install the client; we are getting the following error message:
    " Can not NFS mount the /sapmnt/<SID> file system or /usr/sap/trans file system from zLinux to a Windows server running the new version of NFS service in R2.  The problem does not happen on my XP desktop running Window Services for Unix.
    Please guide me in this regard about how to proceed.
    Thanks in Advance
    Regards,
    Bala

    If pic doesnt work it says
    "This Ipod cannot be used because the required software is not installed. Run the Itunes installer to remove Itunes, then install Itunes again."

  • Workgroup Manager won't create home directories; no error message

    This is quite frustrating. For the past 3 years or so I have used the same procedure to add new users to my LDAP directory:
    1) In Workgroup Manager, click the New User button
    2) Assign name and password under the basic tab
    3) Assign group memberships under the Groups tab
    4) Under the Home tab, select the right place (nfs://my.server.org/Volumes/Users), click Create Home Now
    5) Click Save
    Suddenly, when I try to do this yesterday, workgroup manager won't create home directories anymore. I could probably do it manually, but I'm not sure how to get all the right skeleton setup in there. But my main question is, why doesn't this work anymore? Why can't I at least get an error message instead of being silently ignored?
    I share admin duties with other people, so it's possible someone installed an update recently; all I can really say is that I'm running Leopard Server 10.5.8 right now, and can find out whatever else is relevant.
    Any ideas?
    Thanks!
    ~Ben

    Thanks for the pointer to createhomedir - that did indeed do the trick. (How on earth do people find these little nuggets).
    I hesitate to mark this as solved however - it's a functioning workaround, but does nothing to explain why on earth the GUI suddenly stopped functioning.
    But in the (likely) event that that question never gets answered, thanks again for letting me get on with working!

  • C++ Compiler aborts with licensing error message

    SUN OS - 5.6 with CC compiler version :
    >>>
    Sun WorkShop 6 update 1 Compilers C++
    >>>
    fails after a while when trying to do a Make of few C++ files ,
    the error message is :
    >>>
    License Error : Licensing product (Sun WorkShop Compiler C++ SPARC).
    License File: /opt/SunProd/SUNWspro6.1/bin/../WS6U1/bin/../../license_dir/sunpro.lic,1
    License file does not support this version
    Feature:workshop.cc.sparc
    Application version > License version:6.000512 > 6.000
    FLEXlm error:-21,126.
    >>>
    In this scenario the CC is NFS mounted on my system with a remote license host.
    Has anyone seen this problem ?
    Sunil--
    [email protected]

    Version of Sun C++ prior to Sun Studio 7 (also known as Forte Developer 7) used the FlexLM license manager. To run any of the compilers or tools you need a license server with a license for for the compiler version you are using. Details are in the Release Notes and the Install Guide that came with the product.
    These products are End Of Life, and little support is available for them. If you had a license but lost it, contact Sun Service to find out how to get a replacement. If you have a service contract, contact your Sun Service representative. If not, try one of these web sites:
    http://sunsolve.sun.com/private-cgi/show.pl?target=home_con
    http://developers.sun.com/services
    Unless there is a specific reason why you need to use an obsolete compiler, you should download Sun Studio 11, which is free, and needs no license server. It's also a much better product by any measure. You can get it here:
    http://developers.sun.com/sunstudio/

  • Error messages while installing x86 on PIII

    How can I over come that error messages while installing x86 on PIII GA-60XT Socket 370 Processor Motherboard .
    Strange problem . I did not face that problem with previous versions
    of Solaris 10. I used Sun's Download Manager with the same results. I
    used Nero to burn the DVD file : sol-10-u5-ga-x86-dvd.iso.
    Those are the steps I did . Please tell me any errors about it :
    ---Start of steps----------------------------------------
    I entered in the GRUB append -kd instead of cdrom and then reboot :
    Welcom to kmdb
    [0] > cmi_no_init/W1
    cmi_no_init 0 = 0x1
    Error : unable to configrte Network interface.
    Exiting to shell.
    #exit
    nfs mount : nfs file system , use [host:]path
    then I navigate with the installation program :
    Keyboard layout
    language
    hostname
    password
    Error : the disk you inserted is not a Solaris OS CD/DVD.
    F2
    There were problems loading the media from /cdrom
    -----End of steps-----------------------------------
    Thanks

    Are you using a computer Administrator account?

  • Windows Vista: Ipod Error Message, no longer read by PCs

    Hello,
    I have a 5th generation black ipod video with 30GB of memory.
    The other day I hooked it up to my laptop (Toshiba, 4 months old) that it's been functioning on with no problems whatsoever. This weird error message flashed twice about it not being able to sync because of some software problem.
    Eversince then, the only thing I can charge my ipod on is the family treadmill in the basement (~_~) as no other computer in the house recognizes it. I can't even charge it through the wall sockets, either.
    I have changed the ipod cord, still no luck. I've also reset the device about 3 or 4 times and uninstalled, restarted the laptop then reinstalled itunes. I would like to reset it back to factory settings but that's impossible as computers/laptops don't pick it up. I live very far from a Mac store...
    What's a girl to do? I can't live without my Busta Rhymes and Wu-Tang Clan!
    Any advice would be greatly appreciated! Thanks!

    you have to update Vista go to this site and up-date http://windowsupdate.microsoft.com

  • Error message into a Variable.

    Dear users,
    I have a rather usual (unusual from the weekend beers for me though!!) query which I can't figure out a proper way to implement.
    My requirement is like this:
    I have a message class in which I want to define a text 'Employee number & not found'.
    I want to use this in the program, but not to raise this error. Instead, I want to move this error message with the Employee number into a Character(200) variable.
    So instead of using MESSAGE e0xx(messageclass) USING employee number, I would like to move the error text into a variable which looks like:
    lv_text = e0xx(messageclass) USING '1234'   which stores the text 'Employee number 1234 not found' in lv_text.
    How would I acheive it??
    Thanks, V!

    Try tis way
    message e999(00) with i_emp-empno into lv_text.
    press f1 in message will provide you more details

  • IPod seen by windows, not by iTunes+ weird error message

    I have a first generation 2GB iPod nano and i use windows xp. I can't load any music because iTunes doesn't see my iPod and an error message pops up that reads like this: "iTunes: iTunes.exe corrupt file. The file or directory \iPod_Control\iTunes is corrupt and unredable. Please run the checkdisk utility." I've tried everything, reinstalling iTunes, different versions, reinstalling OS, resetting iPod, even on another computer, same problem. Other than that, the iPod works normally, it's just lacking music..
    and why is there no email adress from apple for service qustions? 10x

    I still don't get it, how can I put it in disk mode if I CANNOT see the iPod in iTunes..?
    Did you read the document i linked you to? here's another link to it:
    Putting iPod into Disk Mode
    whereabouts in that procedure in that document (that you get to by clicking that link) does it say that you have to connect it to iTunes to put it into disk mode?
    ... never mind ... i guess you've fixed it anyway ...

  • Error message iPod cannot update b/c all of the playlists no longer exist

    Hello. I have been getting this error message. "Songs on the iPod "MAR(the name of my iPod)" cannot update because all of the playlists selecting for updating no longer exist." And my playlists are still on the left side in my iTunes. They do exist. I have a feeling ths might have to do with the fact that on vacation the person I was visiting gave me a gift of putting all of his music that would fit into the external hard drive part of my iPod, and for the past week or so I have been putting that music onto my 40 GB portable hard drive at home. I suspect I took a vital folder out of my iPod by accident. Right now I have the folder iPod_control if I open my iPod up in My Computer. Am I missing something? Right now my iPod is empty because iTunes made a composite playlist last week and I deleted it thinking I could get my real playlists back. Can you help me, or reccomend a site/someone who can? Thank you.
    PC   Windows XP  

    hiya!
    And my playlists are still on the left side in my iTunes. They do exist.
    let's just doublecheck this. folks get this message if they have "automatically update selected playlists only" selected in their itunes "ipod" preferences tab. so bring up that tab ("edit > preferences", click "ipod" while the ipod is showing up in the source list), and do a playlist by playlist crosscheck of the playlists selected in that tab, and the playlists showing up in the itunes sourcelist.
    is there any playlist selected in the preferences tab that isn't showing up in the sourcelist?
    love, b

  • Windows Blue Screen Error Message Appears As Soon As IPod Connected

    Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

  • IPod Error Message: "The disk could not be read from or written to."

    Hello!
    I was syncing my sister's video iPod (30GB) and this error message pops up "Attempting to copy to the disk. "SARAH'S IPO" failed. The disk could not be read from or written to."
    I have restored it three times already, but once it starts putting the music and files back onto the iPod it pops up with that error message. I have updated to the latest version of iTunes and iPod software available. My OS is Windows XP.
    Is this something serious? Will I be able to fix it myself or will I need to send it in to be fixed by Apple? Will that be expensive? We didn’t get the Apple replacement plan. D=
    Any help would be greatly appreciated. Thank you in advance. ^_^
    PowerBook G4   Mac OS X (10.4.3)   15" PowerBook 1.5 GHz PowerPC G4, 1.5GB RAM - Windows XP with iPod 5 Generation

    Okay I went thru that entire list and here's what I got...
    (1) My OS is XP and is running fine.
    (2) I've updated my windows
    (3) I don't know of any software that might be interfering.
    (4) There are no damaged files.
    (5) My Windows hard-drive is not damaged and I've tried restoring my iPod's disk thru iTunes but it still doesn't work.
    (6) I don't have an iPod photo and I can't find the folder to delete the cache if if I did.
    (7) The USB cord is firmly connected into my USB port and my iPod
    (8) My music is on my external hard-drive so I need to keep 3rd-party hardware connected
    (9) I will try another USB cord to see if that works.
    Is there anything else that I can do? Can Apple fix this?
    Please let me know.

  • IPod Touch will no longer sync...error message.

    For some reason my older iPod Touch without a camera on it will not sync any more and I am getting an error message saying this iPod cannot be synced. Now I had it set up to sync over Wi-Fi and I would occasionally hook up to the computer with the cable and got error messages on both. Now I read something about removing the SC Info Folder. If I do that will that mess things up with syncing my iPhone? 

    What is the exact wording of the error message?

  • Error Message: Need to purge Cache in Adobe Bridge CC (on PC)

    I tried purging using Adobe Bridge by going to Edit/Preferences/Cache then purging, but it becomes non responsive.  The error message said the problem files were at Users/(my user name)/AppData/Roaming/Adobe/BridgeCC/Cache.   There are 4 files in there that are taking up 124 GB!  Can I simply delete these files or will it corrupt my regular files?  I tried doing as some other forums suggested and hold the ALT key down when opening Bridge before purging, but no luck.

    Yes, you can delete the cache files manually,  Just be advised that Bridge will become very, very slow until it finishes rebuilding its caches.  Depending on your files, that can take a few minutes or several hours.
    A good way of doing it is at night, so you can do it before going to bed and let Bridge rebuild caches overnight.
    If you can, save the cache files before deleting them to an external drive, so that you'll have them as backup if something goes wrong.

Maybe you are looking for

  • Going to a particular part of a song

    I looked in the help and forums but cannot figure out to "fast forward" thru a song to get to the part where I want to get without waiting thru it. Once I have waited thru it once I can go back to the point where I actually want to get, but if the so

  • Can't install Oracle XE on Windows 7 : the install ends fine but no database created and error in log file

    When i try to install Oracle XE 64bit 11g on a windows 7, the installation ends correctly, but no database is created (no datafiles) and in the log file I find : Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Ora

  • F.27 account statement clearing column

    hi, i do not understand what is this clearing column in the account statement. can anyone explain. does it mean if the document number is shown, it is still open item that yet to be moved to cleared item during the account statement key date? let say

  • URGENT HELP-Connecting 2 Switches

    Hi All, I need to connect 2 switches (2960 & 2960S) with only one single link in our LAN network. This is to get extra number of ports. Requesting your help with the followings: Please confirm if straight throug cable will work to connect between the

  • Uregent

    Hi Experts,               Please let me know the types of <b>events</b> available in Table Maintanance generator. The correct answers will be prmptly rewarded. With Regards, Murthy.