SC Alert: SC Request to send to break to host

I have a SunFire V240 server. I jumpstarted the server to solaris 10 and oracle 9i. The system jumpstarts perfectly and all files are extracted. When i reboot the client system it shows an error -->
SC Alert: Sc Request to send to break to host
and the system hangs at this point. I restarted the server and changed the boot setting
auto-boot?=false.
Now the system boots to ok prompt and stops.
From this point it boots to single user mode easily and then we can change it to multiuser mode by issuing the init command. But when we try running the boot command from the ok prompt the system hangs again and throws junk values on pressing any key.
There's another problem --> when running in multi user mode everything works fine like ssh, telnet but if the machine is left idle for some 1 hour the system jumps back to the ok prompt.
Please Help !!!

The "SC Alert" seems to be coming from the etm module which looks like it deals with the service module. You might want to look and see if the v240's firmware is current.
http://sunsolve.sun.com/search/advsearch.do?collection=PATCH&type=collections&queryKey5=119239&toDocument=yes
may make that problem go away.
The second thing sounds odd. Is it precisely one hour? Maybe you have powerd configured incorrectly.

Similar Messages

Access Requests Not Sending Email

Hi Everyone,
We are having issues with access requests not sending in our new SP 2013 deployment. All other emails are flowing properly including workflows, alerts and denials for the access requests. We have verified that the addresses populated
in the access request can receive email and have tested with multiple accounts and DG's.
We were receiving files in the badmail folder on our SMTP Relay every time there was an access request sent. The error was 5.7.1 Client does not have permissions to send as this sender. We updated the relay to allow for anonymous access
in the access and delivery sections and added the WFE as well as the SMTP relay and App servers to the smarthost exception list. After performing this action, we no longer see badmail files populating, but we are still
not seeing the access requests coming through.
Any assistance or guidance on why these emails are not coming through would be greatly appreciated. Please let me know if I left anything out that could be helpful in solving this issue.
Thanks,
Dan

We had this same surprise issue when we upgraded to SharePoint 2013 from 2010. In SP2013, the access request is being sent as the authenticated user of the SharePoint site that is requesting the access. While this makes it easier to reply to the user instead
of having access requests coming from the general account specified in Central Admin, it breaks all other outbound emails if you're using an authenticated account on the SMTP server. Unfortunately, we need certain email groups to be restricted to authenticated
users being able to send to them. This prevents the public from spamming one of our groups. Is anyone aware of a way to have access requests get routed to a different SMTP server than all other outbound emails? Or switch it back to all request coming from
the general SharePoint outbound email account. When you try to route them through the authenticated SMTP it chokes on the mail because the person submitting the access request isn't authorized to "send as" the authenticated account the SMTP relay
is configured to use. I've seen a work-around where users can be granted the right to send as the account used by the SMTP server, but that doesn't really scale well with almost a thousand users.

How I can make a request to send to apple workshop?

how I can make a request to send to apple workshop?

Go to this web page:
http://www.apple.com/support/ipad/service/faq/
Choose your country as appropriate and follow the instructions under "how do I obtain service".
Regards.

CUP 5.3 Canceled Request still sending Email

Hi GRC Experts
I have a canceled request in CUP that is still sending email to users. Is there a way that I can stop the request from sending more emails? Will Archiving resolve this?
A swift reply will be appreciated.
Thanks.
D

Sure, the GRC AC application is a Java based application and all the information is stored in JAVA schema in the database, usually the schema name is something like SAPSR3DB.
Out of curiosity, is that user still getting emails from CUP for the canceled request ?
Cheers !!
Zaheer

What is the key Combination to send CTRL-BREAK Key sequence on MacBook Pro

I need to send a CTRL-BREAK key sequence to a router via console terminal. what is the key Combination to send CTRL-BREAK Key sequence on MacBook Pro
I can't seem to find any documentation on how to send a CTRL-BREAK sequence
TIA

In the Terminal application, select the 'Help > Terminal Help' menu item. In the help window that opens, click on the link 'Shortcuts for Terminal.' Scroll down to the line beginning 'Send break.'

How can I read the request to send line state continually?

Hello,
I new in LV and I'm trying to control a monochomator using RS232 serial port. The problem is that when the apparatus is in operation, sends signals to the request to send line (rs232) whit pulses of inactivity of 30 microseconds. How can count these pulses?

Hello-
The rs232 port is designed to send/receive command bytes to an instrument. Unfortunately, the rs232 hardware is not able to detect pulses in a line. National Instruments sells a variety of Data Acquistion (DAQ) cards that may be better suited for such an application. It sounds like a Digial I/O board may work great for this application. See our online catalog at ni.com/catalog for more details.
Randy Solomonson
Application Engineer
National Instruments

Why can't I get alert tones when I send or receive email. I checked Sounds and volumes are at max.

Why can't I get alert tones when I send or receive email. I checked Sounds and volumes are at max.

Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Decline a meeting request and send a reply?

How can I decline a meeting request and send a reply to the owner of the meeting?
Many Thanks - Michael

Try Menu>Settings>Calling>Call>Reject call with message ?
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Can't send command to SMTP host

Hi,
I am using Jdev11.1.1.2.0 and web logic servere10.3.I am using mail scheduling in weblogic.Actually in window server 2003 I am getting exception is
get message method--->Can't send command to SMTP host
javax.mail.MessagingException: Can't send command to SMTP host;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
But same application windows7 Its working.
So can u give me the idea ? or any configuration webloigc in windows server 2003 ?
Plz help me.
Thanks
Anup

I put environment variable (path) weblogic.jar but still same issue
get message method--->Can't send command to SMTP host
javax.mail.MessagingException: Can't send command to SMTP host;
nested exception is:
javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
at com.sun.mail.smtp.SMTPTransport.sendCommand(SMTPTransport.java:1564)
Plz give me the solution..
Thanks
Anup

Send Port to internally hosted IIS web service needs to run on the SAME IIS SERVER from multiple orchestrations

Hi
We have a multi-server BizTalk environment. We have an Orchestration with multiple call orchestrations in it. Each called orchestration is calling a web service through a 2 way Send Port (which is hosted in IIS on each BizTalk server in our multi server
environment). We have to ensure that each called orchestration is calling these web services on the same IIS server.
I could create a dedicated host instance that the Send Port runs under to run only on one server but then this means that all our DBase traffic is happening on one server. We also thought about using the load balancer some how to achieve this through sticky
sessions etc.
This is all necessary because we are using Entity Framework exposed through web services and we need to manage transactions.
Any ideas on how we may achieve this. I have inserted a picture to try and show the scenario
Biztalk Developer

Haha, Entity Framework strikes again! But seriously, that is a rather odd architectural requirement, double check first. But anyway...
Try this: Configure the Send Port URI to point to something like http://localservicehost/[yourEFService]
Then in the local hosts file (the DNS/IP hosts file), define localservicehost to the local IP address where the service is listening.
That way, the connection will always be made to the local machine. Essentially the same as localhost.

My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available, what should I do?

My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available (3014), what should I do?

Try -
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Also see:
3014
Restoration of code 3014 will not work?: Apple Support Communities

Cant send command to SMTP Host

Hi,
I am sending an attachment using javamail concept.The attachement is working well if i give the host name as gmail,but when i change the smtp_host_name,it gives the error like Cant send command to SMTP Host.The error comes when it executes the following command Transport.send(mimemessage)........can any one find me a solution for this............................
Regards,
suba

Hi,
Thanks ..............I have gone through those FAQ'S and I got the output.....................
Regards,
suba

Errors appeared in alert log file should send an email

Hi,
I have one requirement to do, as i am new dba, i dont know how to do this,
sendmail is configured on my unix machine, but dont know how to send the errors appeared in alert logfile should send an email to administrator.
daily, it has to check the errors in alert log file, if any errors occurs(ORA- errors or WARNING errors) should send an email to administrator.
please help me how to do it

Hi,
There are many methods for interrogating the alert log and sending e-mail. Here are my notes:
http://www.dba-oracle.com/t_alert_log_monitoring_errors.htm
- PL/SQL or Java with e-mail alert: http://www.dba-village.com/village/dvp_papers.PaperDetails?PaperIdA=2383
- Shell script - Database independent and on same level as alert log file and e-mail.
- OEM - Too inflexible for complex alert log analysis rules
- SQL against the alert log - You can define the alert log file as an external table and detect messages with SQL and then e-mail.
Because the alert log is a server side flat file and because e-mail is also at the OS-level, I like to use a server side scell script. It's also far more robust then OEM, especially when combining and evaluating multiple alert log events. Jon Emmons has great notes on this:
http://www.lifeaftercoffee.com/2007/12/04/when-to-use-shell-scripts/
If you are on Windows, see here:
http://www.dba-oracle.com/t_windows_alert_log_script.htm
For UNIX, Linux, Jon Emmons has a great alert log e-mail script.
Hope this helps . . . .
Donald K. Burleson
Oracle Press author

Alert Manager Validation for sending Email

Hi All,
I am planning to use Alert Manager for sending out email in case if there is any locks in the database. I am not able to find a way to send a mail only when there is a lock in the database.
Is there any way to do a validation on Oracle Alert manager before sending the mail ?
Regards
Sridhar M

I am planning to use Alert Manager for sending out email in case if there is any locks in the database. I am not able to find a way to send a mail only when there is a lock in the database.
Is there any way to do a validation on Oracle Alert manager before sending the mail ?Please see the docs referenced in old threads, it should be helpful.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Alert+AND+Manager&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Alert+AND+Diagnostics&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Alert+AND+Workflow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How to test HTTP request for Sender SOAP Channel

Hi all,
We are testing Soap requests from SOAP UI tool.
We are able to call HTTPS calls from SOAPUI tool, but unable to call HTTP request.
we eanbles ssl and able to post https requests.
please advice .
Thanks
RGDASARI

Hi Stefan, I configured the way you have put it, but I get the error "no receiver could be determined"
Here are my settings:
Sender service - HTTP_SEND
sender o/b interface - PROD_MSG_INT_OB_ASYNC
receiver service - FILE_RECEIVE
receiver i/b interface - PROD_MSG_INT_IB_ASYNC
receiver communication channel - FILE adapter
JAVA script:
String Party       = "MFC";
String Service     = "HTTP_SEND";
String XINameSpace = "mfc%3Anamespace1";
String Interface   = "PROD_MSG_INT_OB_ASYNC";
String Url   = "http://nemo:8000/sap/xi/adapter_plain?";
XML DATA File:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:PRODUCT xmlns:ns0="mfc:namespace1">
<ID>E</ID>
<NAME>thank god</NAME>
<BRAND>SOME BRAND</BRAND>
</ns0:PRODUCT>
Stefan Am I missing anything?
XML error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_BE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
It would be great if you have solution for this.
Regards
felix

SC Alert: SC Request to send to break to host

Similar Messages

Maybe you are looking for