SC description while creating Development Configuration

Hi all
I am using NWDS and trying to understand more this tool and this kind of developing. I am looking at Archive SC including while creating the Development Configuration. They are indicated with a sort of ID not completely self explaining and I don't know which of them I have to include because I don't know what they do. The question is: is there a description of SC and their functionality? And does anybody know why if I add an Archive SC later, I have to mandatory change the name of SC even if I included it while creating Development Configuration, was left its Archive name?
Thanks
Gabriele

Hi ,
This exception is raised when a connection or communications failure occurs.
This exception reports all failures and system problems on the remote machine . so look like there is some porblem with your system connection .
Could you please check in your host file , is that entry for system is maintain or not ?
Hope this help .
Regards,
Dinesh

Similar Messages

Getting an error while importing Development Configuration file (NW 2.0)

i,
while importing a development configuration file for Webdynpro ( SAP NW 2.0 ), i am getting an error
"Getting Input Stream Failed-> Unable to find the host ..."
But i can ping to the server and tr is also working .
i could see Active and Inactive Objects
Any access permission is needed to download a configuration file.
or whatis the reason for this error.
any preconditions have to be done for importing a configuration file ?

You can try the following:
1. try the fully qualified domain name of the DTR server host in NWDS Preferences->Development Configuration.
2. Are your WAS and JDI are on a higher SP level. That may cause the problem
regards,

Getting an error while importing Development Configuration file

Hi,
while importing a development configuration file for Webdynpro ( SAP NW 2.0 ), i am getting an error
"Getting Input Stream Failed-> Unable to find the host ..."
Any access permission is needed to download a configuration file.
or whatis the reason for this error.
any preconditions have to be done for importing a configuration file ?

You can try the following:
1. try the fully qualified domain name of the DTR server host in NWDS Preferences->Development Configuration.
2. Are your WAS and JDI are on a higher SP level. That may cause the problem
regards,

Error while create/change configuration an application

Hi,
while doing the configuration application.
when i am trying to create/change configuration an application.
i am getting following error.
Error:
Service cannot be reached
What has happened?
URL http://os1gvzg.gemsconsult.com:8000/sap/bc/webdynpro/sap/configure_application call was terminated because the corresponding service is not available.
Note
The termination occurred in system RT1 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:os1gvzg_RT1_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
can anybody help me out.
thanks in advance,
Kiran.

Hi,
please check [documentation|http://help.sap.com/saphelp_nw2004s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm]
grtz,
Koen

Error while creating Application Configuration as given in WDP-tutorial5

Hi All,
I'm a beginner to webdynpro ABAP. I tried the example given in
'Web Dynpro for ABAP: Tutorial 5 u2013 Component and Application Configuration', but got stuck when tried creating an Appication Configuration.
ie. in Web dynpro application create/change configuration after giving the configuration name I clicked on create in the browser, but it resulted in a error message saying
'Error sending data, session terminated ' of termaination type TH_RES_FREE.
Please suggest me a solution to resolve this.
Regards,
Manoj Kumar P

That sounds like lower level system problems - like like of available memory. That doesn't sound like a normal application error or even a short dump. You should have your Basis administrator look at the system logs for that time period. Does this happen every time you try this particular action? Have you checked ST22 to see if there are any other details on the error?

Error while import development configuration

I can't import development configuration in NWDS from file. After upload xml file, config-dialog ask me to auth into NWDI.
I enter my login/pass and recieve strange status: DTR auth me well, but CBS can't auth me at all!!
Any ideas?

Hi,
NWDS you need to try this General->Network connections-Active Provider dorpdown change to manual
Add Host button click hostname/IP your server details enter.
After try to import the track.May be help for you.
BR,
Durga.

FPM: Error while creating component Configuration

Hi,
I have installed ABAP trial version (NSP), but without loopback adapter. So, now for every WebDynpro application, I have my manually change link from "http://<mymachineName>:8000" to "http://localhost:8000".
I create an application on FPM component: FPM_OIF_COMPONENT, then an application configuration for this application.
I open this Appl. config. in se80 and press "Start configuration". Now I try to create new component configuration.
After maintaining description and transport information, I save it.
At this point, I get a dump:
"RFC Error while sending logon data"
CALL_FUNCTION_CONNECT_ERROR in CL_WDR_CFG_COMP_SHBROKER======CP.
The class: CL_WDR_CFG_COMP_SHBROKER method: INVALIDATE
has a call: call function 'WDR_INVALIDATE_CFG_PATTERN' starting new task l_cfg_task
exporting client = client pattern = l_instance_name .
where it dumps.
could you please to resolve what could be wrong? is there some system setting which I missed.
Regards,
Daman

Hi ,
This exception is raised when a connection or communications failure occurs.
This exception reports all failures and system problems on the remote machine . so look like there is some porblem with your system connection .
Could you please check in your host file , is that entry for system is maintain or not ?
Hope this help .
Regards,
Dinesh

Getting Error while creating device configuration (Schema Node ref problem)

Hi,
In MDM 2.0.1, I created the following(in order) :
1.UOM
2.Measuring Component Type
3.Device Configuration Type
4.Service Provider
5.Device Type
6.Device
But when trying to Configure the created Device, its showing some error as...
Schema node isNewCase (/schema/[includeDA F1-CommonToDoEntryData]/isNewCase) references non-existent service field NEW_CASE_SW.
After this has happened, i couldn't even add another configuration to some of my Existing Devices..
(But for Some existing devices, adding a new configuration doesn't throwing errors..)
Please help regarding this...

Is the Measuring Component Type u created is added in DeviceType's ConfigType list..?

Error while creating a Development plan template

Hi Gurus,
I am facing errors while creating Development Plan Template.
This is how it goes :
When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
Now after clicking next, I am adding 2 development areas :
1) Training
2) Mentoring,
now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
error2 : Value type 000000XXX of value class Q does not exists
Warning 1 : You have maintained a description that is not displayed.
In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
Kindly let me know how to proceed further.
Regards
bharti

Hi,
Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
But when I run the Concurent program and see the output,the output still shows me the old template.
Regards
Jujaar

Can't write cache file for while creating domain in soa 11.1.1.5 on HP-UX

Hi,
Installing SOA 11.1.1.5 on HP-UX and during domain creation/configuration I am getting the below errors
**sys-package-mgr: can't write cache file for**
and have lots of cache file errors for different packages
Any idea what might be wrong and whats the cause of these errors and is it safe to ignore these errors if not what is the work arround. As I already looked at the below post but I don't find */var/tmp/wlstTemp* on my machine as suggested in the post below.
SOA 11.1.1.5 install got can't write cache file
So wondering if there's anything else I can do i.e. while creating or configuring a Domain pass some parameter to config.sh etc.
Thanks

Hi,
I don't see python.cachedir in config.sh. Here is config.sh
#!/bin/sh
mypwd="`pwd`"
# Determine the location of this script...
# Note: this will not work if the script is sourced (. ./config.sh)
SCRIPTNAME=$0
case ${SCRIPTNAME} in
/*) SCRIPTPATH=`dirname "${SCRIPTNAME}"` ;;
*) SCRIPTPATH=`dirname "${mypwd}/${SCRIPTNAME}"` ;;
esac
# Set the ORACLE_HOME relative to this script...
ORACLE_HOME=`cd "${SCRIPTPATH}/../.." ; pwd`
export ORACLE_HOME
# Set the MW_HOME relative to the ORACLE_HOME...
MW_HOME=`cd "${ORACLE_HOME}/.." ; pwd`
export MW_HOME
# Set the home directories...
. "${SCRIPTPATH}/setHomeDirs.sh"
# Set the config jvm args...
CONFIG_JVM_ARGS="${CONFIG_JVM_ARGS} -DCOMMON_COMPONENTS_HOME='${COMMON_COMPONENTS_HOME}'"
export CONFIG_JVM_ARGS
# Delegate to the main script...
"${WL_HOME}/common/bin/config.sh" "$@"Thanks

Exception while creating Divice config.

In NWA we a re having an error BaseEJBException while creating device configuration. so i have J2EE admin and web console can anyone plz tell me how to create Setup packages with the help of these two
Thanks & Regards
sandeep verma

Hello Sandeep,
A BaseEjb exception may occur when there is some communication problem with middleware.
Please check the SAPJRA property as per type of your J2ee-engie (ie. standalone or cluster) by following the steps as mentioned in the below link -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/1d7d843fce3566e10000000a11466f/frameset.htm
Hope this will help to resolve your issue.
Thanks and Regards,
Ruchi.

How to delete Development Configuration entries

I have used document "How To... Setup CM Services" to configure NWDI with CTS+ for a Portal environment.
My STMS configuration in the CTS+ server looks like this:
EPU -> EPD -> EPQ -> EPP
EPU = Upload System
EPD = Development
EPQ = Quality
EPP = Production
Everything was going ok but by mistake I created the upload system in the CTS+ environment with the option "Create development configuration" and this generated an entry in the Development Configuration of the NWDI which I am not able to erase because the delete option is not active. I have tried to fix it by deleting the system EPU in the STMS of my CTS+ server but even though I no longer see the system in STMS I still see it in the NWDI.
How can I delete Development Configuration entries? Any help will be appreciated.
Regards,
Ayax
Edited by: Ayax Morales S?chez on Sep 8, 2010 12:28 AM

Hi,
For the sake of completeness;
Solution: Direct call to Web Service using the Web Service Navigator:
1)     Call http(s)://<host>:<port>/wsnavigator
2)     Click on u201CProvider Systemu201D, then u201CSearchu201D, then in the table u201CDIConfigurationServiceViu201D:
3)     Click on u201CNextu201D, then u201CdeleteDISystemu201D
4)     Click on u201CNextu201D, then remove all u201CSkipu201D ticks, set certificate to u201CanySimpleTypeu201D, u201Cpasswordu201D to the password of the system, u201Cuser Nameu201D to the user, u201CsystemIDu201D to the name of the development configuration:
5)     Click on u201CNextu201D. The development configuration should now be gone.
Thanks
Kenny

Short Dump while creating Configuration (Application or Component)

Hi All,
I m facing a short dump, while creating a Component or Applcation Configuration
in the standard FPM_GAF_COMPONENT.
Short dump states the Runtine error as MESSAGE_TYPE_UNKNOWN
Short text
    Message type " " is unknown.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_WDR_MESSAGE_MANAGER========CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Information on where terminated
    Termination occurred in the ABAP program "CL_WDR_MESSAGE_MANAGER========CP" -
     in "IF_WD_MESSAGE_MANAGER~REPORT_T100_MESSAGE".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 16
    of the (Include) program "CL_WDR_MESSAGE_MANAGER========CM00R".
12        exporting
13           textid = cx_wdr_rt_exception=>invalid_
14   endif.
15
>>>>   message id msgid type msgty number msgno
17           with p1 p2 p3 p4
18           into msg.
19
20   if p1 is not initial.

Hello Srikanth,
I have no issues in trying to help someone as polite as you! It is very nice to have questions answered in an intelligible manner - not unfortunately always the case.
Without being able to debug on your system it is quite difficult to say what might be causing this error - especially as you say this was working in a different system.
I'm sure you've already tried eliminating differences in your authorisations between the two systems? Are you registered as a developer in the new system?
Sorry I'm now just guessing as I've not come across the error myself - hopefully now that we have clearly documented the issue, someone else might be able to shed some light on what might cause it!
Chris

Problems while creating Web Services in development server

Hello,
We are facing problems while creating Web services . The transaction like WSADMIN, WSCONFIG are not there in development server. Its gives message u2018This transaction is obsoleteu2019.
Due to this while creating Webservice, there is and error message . Kindly guide me whats needs to be done.
We have also tried the transaction WSADMIN2 as suggested by SAP, but didnu2019t know wat needs to be done.
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 9:15 AM

Hi,
With your help, we were configuring WEB Service through soamanger.Due to some problem, we couldn't proceed further.Kindly guide us with the further steps.
*steps followed *
Step 1 : Entered Service Registry Parameters in WSPARAM .
Step 2 : In transaction SOAMANAGER->Technical Configuration -->System Global settings
Step3 : From u2018SE80u2019 transaction, selected the package ZHR and then right clicked to create the enterprise service -> Client Proxy (Service Producer)
We have followed steps in se80.Don't know how to proceed further.
We are unable to find the service in soamanger .How to find the service name in soamanager?
Regards,
Rachel
Edited by: Rachel on Feb 3, 2009 12:38 PM
Edited by: Rachel on Feb 3, 2009 12:48 PM

Getting the following error while creating a new configuration

Hi team,
I am trying to create configuration of my web dynpro application. When
I right click on my application and choose create/change configuration,
browser started. Now when I give a name ( e.g zabc) to it and choose the
function create, the following error occurs... Can you please give me
suggestion to overcome it
Error when processing your request
What has happened?
The URL https://gsdcb261.in.ibm.com:8443/sap/bc/webdynpro/sap/zims_issue/ was not called due to an error.
Note
The following error text was processed in the system SD4 : Screen output without connection to user.
The error occurred on the application server gsdcb261_SD4_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSKEY
Function: TADIR_OBJECT_CHECK of program SAPLSKEY
Function: CHECK_ACCESS_KEYS of program SAPLSKEY
Method: CHECK_TROBJ_BEFORE_EDIT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: FILL_APPL_CONFIG_CONTEXT of program CL_WD_CONFIGURATION_MODEL=====CP
Method: UPDATE_APPLICATION_TREE of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: IF_COMPONENTCONTROLLER~UPDATE_APPLICATION_TREE of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: ONACTIONACTION of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: ONACTIONACTION of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/0A4VPNTYZEA2W6Q9CMDX==CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system SD4 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server gsdcb261_SD4_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server gsdcb261_SD4_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-https -c: 100 -u: AGAURAV -l: E -s: SD4 -i: gsdcb261_SD4_01 -w: 0 -d: 20070426 -t: 200845 -v: RABAX_STATE -e: DYNPRO_SEND_IN_BACKGROUND
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hello Thomas,
I am sorry but I haven't check this forum in the last weeks because of lack of time. Thanks for your hint regarding a potential solution. Taking a look a the note I have some problem in "using" it.
This note contains a number of potential solutions regarding our problem.
Solution 1.) one could use the modification as described. Surprising to read that SAP is saying: do a modification to solve the problem. => this is only possible "manually" I am not sure If I will follow this approach
Solution 2.) Change the URL: This solution scenario I do not understand. The solution path is "very" short and not very instructive. This is the story:
You can do this by adding "_OLD" to the name of the application of the URL created for the configuration: Use "CONFIGURE_APPLICATION_OLD" instead of "CONFIGURE_APPLICATION"
and "CONFIGURE_COMPONENT_OLD" instead of "CONFIGURE_COMPONENT". If you want to use this function as your standard, you have to change the original application. To do this, set the parameter "OLD_TR" to "X".
This solution path is "to short". I do not get the "message" what to do.
Furthermore: Does that mean you have to use this peculiar solution any time durnig software development of webdynpro components using configurations? In my opinion yes. This is therefore only a "workaround solution" and nothing else.
And there can I find this parameter "old_tr" they are talking about?
Sap note 1060287 is the "same" kind (Symptom of this note:
If you use the configuration editor, there may be errors during transport handling or
DYNPRO_SEND_IN_BACKGROUND crashes.).
Here they are saying:
"Solution
A final solution will be provided for Release 7.0 BASIS Support Package 13."
So in SP13 there seems to be a solution (I haven't found up to now the corresponding note). But does that now mean I must implement the complete support package?
So I am sorry: No progress on my side up to now. May be you have had some success?
With best regards
Christoph

SC description while creating Development Configuration

Similar Messages

Maybe you are looking for