SC does not appear fast while making tracks in CMS..Why....Please guide

Hello All,
1. I created a SC in SLD (Product -> SU)
2. Now. while making track, this SC does not appear immediately.
<u>Question</u>:
Why does this SC take soooo much time to appear? Wat can I configure/setup to make this process faster?
Please guide.
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Hi Ritu,
Once you create a SC make sure that you click on Update CMS button once you login to CMS. This will make CMS read SLD and refresh its cache.
Regards
Sidharth

Similar Messages

  • HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running  mountain Lion 10.8.2

    Because line-in has been removed.
    It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
    You'll need to use a Griffin iMic or similar to use line-in via a USB port.
    The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

  • HT5312 i am having problems editing the security questions i do not remember i specifically followed the steps and the "send to rescue email" option does not appear even though my rescue email is verified please help me

    i am having problems editing the security questions i do not remember i specifically followed the steps and the "send to rescue email" option does not appear even though my rescue email is verified please help me
    <Email Edited by Host>

    As these are public forums, you're not talking to iTunes Support,  I've asked the hosts to remove your email address from your post - it's not a good idea to post it unless you like spam email.
    The reset link will only show if you have a rescue email address on your account - a rescue email address is not the same as an alternate/secondary email address, they are different addresses/settings on an account.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support / Apple to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use

  • TS5181 iTunes radio does not appear in "Music" on my iPod Touch, Why?

    iTunes radio does not appear in "Music" on my iPod Touch. How can I fix this?

    Ok, I have resolved this issue myself. I contacted Apple support but they had no clue.
    The resolution is this, bring Siri up and say "radio". Radio comes up and you touch "now playing". Believe it or not the radio icon appears and remains.
    I hope that helps other folk.

  • HT1526 When I delete a file it does not appear in my trash folder 10.6.8, please help.

    Please help as when I delete a file it does not appear in my trash can, however it deletes.

    You might have to rebuild your hiden trash file...
    Solving Trash Problems...
    http://thexlab.com/faqs/trash.html
    Empty and recreate an account's Trash
    The following procedure will "kill two birds with one stone." It will both:
    Empty the Trash of an affected account.
    Create a new ~/.Trash directory, with correct ownership and permissions, for that account....
    More at that link.

  • HT1473 "Add Folder to Library" option does not appear on the File menu??? Please help.

    Please help.

    8675-30-9 wrote:
    Hello,  and thanks for your assistance.  however, I do not have that particular menu visible on my screen, I have only the half shaded box in the upper left of the screen and it does not appear in there when I click on it?  Any way to get the menu you are showing to appear on my program?  Is there a setting somewhere I am missing?
    Click the half-shaded box, and choose "Show Menu Bar." 
    That will enable the menu with File, Edit, View, etc.   Then you can proceed as above.

  • HT4259 I have my airport extreme plugged in within range but the device does NOT appear in airport utility (on the left).  Please advise.

    To extend wifi range, I plugged in my airport extreme within exisitng range but the device does not appear in my airport utility (on the left of the screen).  The airport extreme is blinking amber.  Please advise. Thank you.

    The AirPort Extreme can extend the signal from another Apple router wirelessly, so as long as you have a 802.11n version of the products, the extend function should work.
    Please check to locate the Model No of both of your AirPort routers. It will be on the bottom of the device. Starts with an "A" followed by four numbers, as in "A x x x x".
    Post back with that info.
    We also need to know the version of AirPort Utility that you are using. If you are not sure, click the AirPort Utility menu in the upper left corner of the screen, then click About AirPort Utility and post back with tht info as well.

  • I am unable to view google ads running alongside and under videos on YouTube. This is only a problem when I use Firefox. If I use another browser, I can see the ads. I do not have adlock as it does not appear in my plug-ins/add ons. Please help..

    I have been using Firefox for about two years. For about a month now I have been unable to view any Google advertisements that run on YouTube pages alongside and under videos. This is important for my business. I would like to stay with Firefox, but this is only a problem when I use Firefox and is not a problem with Internet Explorer or Google Chrome as I checked. I tried uninstalling Firefox and all plugs ins and add ons and then reinstalling it. This did not work. Firefox seems to be blocking the Google codes that enable the ads to run on the pages. I look forward to your help. Thank you.

    CS2 is very old and reached its "end of life" a while back.  So probably won't run on modern operating systems.  If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
    Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
    Nancy O.

  • HT4623 I do not have the software update on my  IPad? It does not appear anywhere on my settings. Now what please?

    I do not have a software update located in general settings. How can Iget it back, or how can iI upgrade to ios5 or 6

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.0.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Aperture library does not appear in Photos browser of FCPX. Why?

    I can't figure out how to make FCPX photo browser to show my Aperture library. Apple support tells: open photo browser and you will see all your aperture libraries. But my photo browser is empty. I searched the web, this forum and did not find the answer. Any suggestions?

    Thank you very much Luis Sequeira1 and Skyking.
    I tried it and it worked.
    Just strange that you should do something which is not listed in the official manual.

  • HT201365 before I accepted the ios7 upgrade I could turnoff apps before shutting down my iPad now the little minus sign does not appear however i tap or hold the icons. please advise - thanks

    before I accepted the ios7 upgrade this morning I could turn off apps before shutting down my ipad. now it doesn't matter how i tap or press the applications I have been using in the session they only open again. Help please?

    Welcome to the Apple community.
    Double tap your home button and then swipe the applications to the top of the screen to close them.

  • Cannot open file it does not appear to be a valid archive

    While trying to download Oracle 8i/9i i keep getting the message
    'Cannot open file it does not appear to be a valid archive'
    Can someone please help me with this
    i have tried to download this 10 times already but of no use
    Thanks
    Rimpy

    I was getting a similar, if not the same, problem when I used IE 5.5 to download the file. It used to start extracting then stop about 75% of the way through and dump some error about the archive being corrupt and not being able to open it. After installing Netscape and disabling the download manager application, I was able to download and extrac the zip files with winzip 8 and also winrar without any problems.

  • Photo does not appear on my blog

    Hello everyone,
    I'm a newbie in Photoshop and require your kind help!
    I recently created a blog dedicated to Baby Names: http://www.babynameslog.com/top-baby-names-2013/
    I'm trying to show a 728x90 image under the main menu, I've created a nice (don't laugh!!) image (you know full of babies, etc!!!) and tried to upload it via Wordpress system
    However, for some strange reason, it does not appear on my blog.
    Any ideas why? Maybe the format of the .jpg ? What am I doing wrong?
    Thanks in advance

    Several things could be wrong, but if you are positive, that you uploaded the image via wordpress's UI, then its possible that folder does not have the correct permissions for it to be viewed on the web. Contact your service provider and ask them if they can see the file and are the file and folder permissions correct and if not could they do it for you and perhaps explain how you can do it yourself in the future.
    Another question is this the first time this problem came up (that is other images worked just fine when uploading) or is this the first time you have tried uploading images? If it is the former, then something else is the culprit, but the latter, could easily be the above.

  • Help!!  "This does not appear to be a valid Podcast URL" -- but it is!

    I'm having trouble subscribing to the Vatican Radio podcast (English version). I recently moved to a new computer and resubscribed to all my podcasts. This is the only one that won't work for me.
    I've contacted the Radio Vatican webmaster and he's confirmed I'm using the right URL - www.radiovaticana.org/rss/inglese.xml
    But when I subscribe to it through either the iTunes Music Store or the iTunes "Advanced" menu I get the reply - "http:www.radiovaticana.org/rss/inglese.xml does not appear to be a valid Podcast URL. Please check that you have entered the correct URL and try again."
    I'm able to download individual programs through the Music Store, but it won't take a subscription for some reason.
    Anyone have any ideas? I've never faced this before.
    FYi I'm using the latest version of iTunes on a MacBook with version 10.4.7.
    MacBook   Mac OS X (10.4.7)  

    Plug that URL into a feed checker site, and you get a "mass" of errors. Pass that along to them, they need to fix these errors.

  • Good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should ap

    good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?

    ?

Maybe you are looking for

  • JOB_CLOSE function module

    Hi Experts, I am calling the function module 'JOB_CLOSE' as follows passing 3 (job name, job count, start immediately) parameters.But it is failing and the sy-subrc value is 4 (job_close_failed = 4). Please tell me how to correct this. CALL FUNCTION

  • Computer crash, warning on timeline and now inaccessible

    Hello, thanks for the help. I was working on FCPx on a timeline and my computer crashed.  Upon starting it up again the timeline I was working on is now in its own folder entitled "No Data".  The timeline that I was working on is listed in there but

  • Best photograph format for FCP???

    I'm doing a video for a memorial service and I am wondering what format I should output photographs? JPEG, PSD, PNG? Please help! Thank you!

  • Can't seem to connect my keyboard

    Cant connect my old wireless keyboard

  • Track completion of embedded swf within captivate project

    I have a swf created within captivate 4 which is a traiining simulation.  Now I want to embed this simulation on a screen within a new host captivate project and enable the next progress button only when the embedded training simulation is done. What