SC--- Dump when I use wrong WBS element

Hi SRM gurus,
Can You plase give is there any OSS note for the following dump or solution if any.
I have maintained by mistake wrong WBS element
Example : Correct WBS is E-PTHK.CK.01
Entered as E-PTHKC.CK.01 in this case getting Dump.
Entered as E-PTHK.CK.02 in this case getting std Error as " No WBS element Exist"
Thanks in advance

Thank you both,
Actually User has be maintaing in the personal settings before creating the SC.
By mistake he has typed wrong in settings so Dump occured
To avoid this is there any solution.
Thank you
Edited by: CK on Apr 2, 2009 5:44 PM

Similar Messages

Selecting wrong WBS element while preparing the Purchase Order

Hi Gurus
We want to check the data while end user input it in the system.
While preparing the the PO in the sysetm we input the plant id,storage location and WBS element.
End user may select wrong WBS element of project under with plant. I want to prevent it.
How can I prevent end user for selecting wrong WBS element under plant and storage location.
Atul Kulkarni

HI,
You need to some developement...create Z table and maintain the entries with the cobinations in what way you want to restrict and call the same in the PO.
Hope it will works.
Kuber

GM Derivation strategies (GMDERIVE) using statistical WBS elements

Hi experts!
I have a question related to GM derivation rules.
We need to derive Sponsor program throuhg WBS elements.
These objects are statistical in our system.
I note that SAP R/3 Derivation strategies need actual postings to derive Sponsor Program.
Is it true? What can i do to derive sponsor program from statistical CO objects? Maybe enhancement, function module?
Thanks in advance and best regards

Hi
I did not explain properly. Postings are using cost centres and WBS elements, both in every posting. This means WBS postings are statistical.
As WBS elements correspond to sponsored programs I want to derive sponsored program from WBS. I tested in SAP and Sponsored program is derived from cost centre (actual) and not from WBS (statistical posting).
This means creating dozens of cost centres. Is there any way to derive Sponsored Program using GMderive from WBS elements?? I would like one direct way, assignment or derivation rule. Is it possible. I am afraid that only enhacements or function modules can be used. Has anybody used them for this?
Looking forward to hearing from you soon.

When i use Adobe Premiere Elements 10, after about 10 minutes it stops working please help

I recently purchesed Adobe premiere elemnts 10 and it installed correctly, and it loads up fine but once i start putting video together, it starts to mess up, the video i cant watch because its very slow and jumpy and then after a few minutes of me editing a message pops up saying Premiere elements 10 has stopped working, and windows dose not give me a reson why it just stops, i am stuck with what it could be, the video i am using is from a dslr and is in full hd but that works on windows movie maker fine but dose not seem to work on this programe any help with this would be appriceated

>dont know what you mean by codec
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen
shot works well to SHOW people what you are doing
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/

Billing of a WBS Elements when we use a purchase order.

Hi,
My question is: Usually we use purchase order of the provider to create the delivery and after that the billing document. We use transaction VL04 to do that. It is a process of intercompany billing.
We have too, a process that we use a WBS Elements and after that we create a delivery and a billing document.
So, how can i use the two billing process in the same bill? The goal would be bill a WBS Elements using the original purchasing order of the provider VL04.
           Best Regards
              João Fernandes

Hi,
My question is: Usually we use purchase order of the provider to create the delivery and after that the billing document. We use transaction VL04 to do that. It is a process of intercompany billing.
We have too, a process that we use a WBS Elements and after that we create a delivery and a billing document.
So, how can i use the two billing process in the same bill? The goal would be bill a WBS Elements using the original purchasing order of the provider VL04.
           Best Regards
              João Fernandes

Using FIDCCP01 to post costs to a WBS Element

Hi,
We're trying to post costs into SAP through idoc FIDCCP01, and it works fine when posting to cost centres or internal orders. When using a WBS Element (in the field PROJK) we get error status 51 with the message "Account (any gl code) requires an assignment to a CO object".
We've checked that the WBS Elements being used are released and have settlement rules, and we've tried using both internal WBS codes (field PSPNR in table PRPS) and internal Project codes (PSPHI in PSPR) in the field PROJK in the idoc - external WBS codes are too long for the 8 characters.
It may be possible that we're using the wrong reference from within SAP, or the wrong field in the idoc or that there's something else wrong with the set-up of our WBS Elements, but we can't work it out.
Can anyone please help?
Thanks.

For info, answer from SAP below:
SAP says Basic type FIDCC01 used for ALE IDOC data transfer (From one SAP system to other SAP system) and WBS element number (number associated with WBS code) could be different in two different system and hense in this interface logic it is clearing the value filled in the field PAOBJNR and PROJK. Hense in further processing accout assignement found missing.
For more details check OSS notes 674027, 114814 and 197951.

Getting Billing Element in Purchase Order Using WBS element.

Hi,
What is the process and logic to get the billing element and the corresponding Sales order details using the WBS element or network of the account assignment category in the Purchase order line item.Please suggest the tables to be used to fetch the Sales order details using this procedure.
Thanks
Anand

Project PO can be generated in following methods.
1.When a Material attached to Activity in the Project, PR can be generated with A/C assignement Q. System wil copy the WBS element to which activity is assigned in the account assignment tab of PR. When PO is created with reference to PR, system wil automatically copy the WBS from the PR in to PO account assignment tab.
2. U can directly create PO with account assignment Q and assign WBS in account assignment tab.

CJ9B - error message when copy locked project or wbs element

Dear Expert,
Tcode CJ9B is for copy planning wbs element/project and every month i need to unblocked all the project or wbs that not use (locked) one by one to make CJ9B able to run without any error.
Is there any way to do mass change on wbs element or project as i unblock one by one in tcode CJ02?
Please advice what is different between CJ9B and CJ9F? Is it same doing copy planning wbs or project?
regards,
ng chong chuan

For the locking and unlocking you can use CJ20n -->WBS element overview instead of the CJ02 so, you can make mass locking and unlocking of WBS all the WBS elements of project atleast.
CNMASS tcode is for the mass changes in PS but same will not work for hte system status change.
One workaround is that you write BDC via SHDB txn and user that BDC to change the status of all the WBS for which you wanted to lock/ unlock .
You can also use LSMW also.
Regards
Nitin

Dump when command STOP is used.

HI experts,
I am facing dump , when i use STOP command.
IF va_answer = 2 .
stop.
endif.
i have to stop creation of contract creation,without saving anything .so i have used stop.
this is not inside any loop / case .
please help me out in this.

HI,
What do you mean by
i have to stop creation of contract creation,without saving anything .so i have used stop.
Are you coding teh STOP statement in some user exit while creating the contract?
You can use STOP in an exit.
Kindly be more specific with your requirement.
Regards,
Ankur Parab

Creating a Validation for WBS Element in the Asset Master Record

I would like to know how to create a validation in the AMR for the WBS Element field. I would like to have a particular Business Area when used be required to only use a WBS element that starts with, let's say, AL. Can someone shed some light on how I would set up my check in OACV?

Hello
You can validate or substitute data directly at the input stage. You make the settings for validation and substitution in the Implementation Guide (IMG) for Controlling, under Controlling General ® Account Assignment Logic ® Define Validation or Define Substitution
Substitution and validation are only intended for actual postings
For a complete description of validation and substitution, see the SAP Library under Accounting - FI Financial Accounting ® Special ledger ® Tools ® Validation and Substitution Rules
Coordinate with ABAPer and make settings.
Reg
*assign points if useful

1 project definition with several wbs elements or several project definitin

Hello
I need projects as account assignment elements in CO (when entering vendor invoices for costs). Should I have 1 project definition with all projects /wbs elements underneath, or should I have 1 project definition uniquely defined for each project/wbs element? Some projects are not settled to assets und construction, some projects are settled to assets und construction.
kind regards
Arjan

Arjan
I don't think you can have Projects as account assignment objects. You can have WBS element as account assignment object.
One alternative I can suggest, if you want to see project costs at higher level instead of breaking down the project into many WBS elements. Create a project with one WBS element only and use that WBS element as account assignment object.
It is only possible to have a project with one or more WBS elements. I don't think you can define projects within projects.
letus put it this way assume WBS elements are projects within a project. But make sure all the WBS elements are related to one project
Hope you are clear now.
Thanks
Prasad

Change of Source Structure for Partial Settled WBS elements - CJ02

Hi
As per standard SAP, the change of source structure under settlement perameters of WBS element is not supported when the settlement of WBS element is done either partial / full.
However, the client needs this change by doing any Z-Development as one time activity (since the source structure was changed for certain WBS elements as per change in business process).
Can i Know procedure to do the Z development to modify the source structure for partial settled WBS elements and also let me know the any side effects in this regard.
Regards
Anil

Hi Anil,
I agree with Ajay. You can try to change it in Debugging mode.
The values are handed over from include LCJWBF5Q (form project_settle_single using)
Some customer have also made a modification as a permanent solution.
Unfortunately in the standard it is not possible.
regards Bernhard

Trasaction code for invoices detail which has hit the WBS element

Hi All
Usually my users receive a list of assets which were capitalized from AUC account through Project system.
Generally charges are posted to WBS element and then users capitalize assets using that WBS element through settlement.
Users have been asked to give all the invoices detail which has hit the WBS element from which that particular assets have been capitalized. is there any transaction code to get the all invoices detail which has hit the WBS element from that particular assets.
thank you

If that is what you want then why are you using WBS element?
You can directly create the asset on goods receipt via MM module and then the invoice will automatically go against that asset.
If you still want to use the WBS element for capitalisation then you can use the WBS element statistically with a type 90 cost element posting and the sset will still be crteated when goods receipted/ invopice receipted

Segment for WBS element in Inbound Sales Order Idoc

Hi gurus,
I am trying to create an inbound idoc for sales order ' VA01'. I need to populate WBS element in the item level under Account Assignment Tab. I am using ORDERS05 basic type. Please help to find which segment to use for WBS element. Waiting for your reply. Please help.
Regards,
Satyajit

Hello,
        As far as I know, there is no Segment / Field definition in ORDERS05 for WBS Element as it is not mandatory information to be filled in order for the Sales Order to be Complete. So, you need to create an Extension of the IDoc Type ORDERS05. For your requirement, here is the Approach I have.
1. Create an extension for IDoc Type ORDERS05 to ZORDER05 with a Custom Segment Z1EDP01 in which you'll have the Custom Field Name VBAP-PS_PSP_PNR which is the WBS Element field in VBAP Table.
2. Now, use the Customer Exit EXIT_SAPLVEDA_001 in the Enhancement VEDA0001 in which you can actually populate the Field WBS Element that would be already available in the Inbound IDoc to store it in a Work Area. As you are aware, you'll need to create a Project in CMOD for the same.
3. Export the same to some MEMORY ID 'XXX'.
4. Come back to the Selection Program for ORDER05 which is IDOC_INPUT_ORDERS in which you'll find the below CASE Statement.
    CASE xaprau.
          WHEN ' '.
            PERFORM call_va01_new_orders USING ok.
          WHEN 'Q'.
Aufruf Transaktion Auftragerfassung VA01 mit Bezug auf Angebot
call transaction Order Entry VA01 with refer to quote number.
            PERFORM call_va01_new_orders_angbt USING ok.
          WHEN 'C'.
Aufruf Transaktion Auftragerfassung VA01 mit Bezug auf Kontrakt
call transaction Order Entry VA01 with refer to contract number
            PERFORM call_va01_new_orders_contk USING ok.
          WHEN 'L'.
5. Now, since our Standard Order Type (VBAK-VBTYP) is 'C',
    we'll have to choose the Subroutine for the 'C' Option.
6. In this Subroutine, there is another Subroutine va01_dynpro_kopf_kaufmann_kde2 which is for populating Custom Dynpro Fields for the Sales Order. So, we need to choose the same Subroutine inside which we have to Create an Enhancement Implementation.
7. In this Enhancement Implementation (Implicit), we have to IMPORT the value of the WBS Element which was exported in the Customer Exit.
8. Check if it is initial. If it is not, then Call the Perform as below.
     IF NOT WA_Z1EDP01 IS INITIAL. "Checking if the Segment
                                                       " is Empty
   PERFORM DYNPRO_SETZEN USING 'COBL-PS_POSID' WA_Z1EDP01-ZZWBSELEMENT.
ENDIF.
9. Since the Sales Orders are posting using BDC here, by calling the above Subroutine DYNPRO_xxx, we are appending our Custom Segment / Field value to the BDC_DATA table.
10. In Step 8, I've given the Notation for Work Area. It will also be applicable when there are multiple Line Items. All you have to do is to EXPORT an Internal Table instead of Work Area and use the same here for each Line Item.
11. I've given you above procedure because I've worked on similar requirement in which I had to populate the Special Processing Indicator instead of WBS Element.
Hope it would be helpful for you.
Thanks and Regards,
Venkat Phani Prasad Konduri

Strategy 92 don't consumption the Pir for WBS element

Dear Gurus,
i insert in the material master MRP3 the group strtegy 92 (Planning with final assembly).
After we insert in the MD61 the planned indipendent requierement whit the transaction MD61 and
we set the field "Acct Asst Cat" = Q and the insert the WBS Element.
After when whit the transaction VA01 we create the sale order position whit the same WBS element the system
don't consumption the Pir , but propose the double quantità to product.
I need use the WBS element in the Pir and in the Sale order but i need to consuption the Pir quantity whit the sale order quantity.
There is the customizing settinG?
Thanks a lot
Daniele PIstilli
PP TEAM

HI,
Check your planning strategy 92 in
IMG>production>production planning>demand management>PIR-->Planning startergy-> Define stratergy
Check for your Strategy 92
Reqmt type of independent reqmts
Is consumption is set as 1?
and also check
Reqmt type of customer reqmts
is Allocation Indicator is set as 1?
IF Not
maintain in OVZG for your Requirement Class specified in strategy for customer requirement
for PIR Requirement Class maintain the setting In OMPO

SC--- Dump when I use wrong WBS element

Similar Messages

Maybe you are looking for