SC : Extended Search on Header Customer field

Hi ,
I have created customer defined field on Header & Item in SRM 5.0 .
I am showing both of them on Extended Search in Check Status of Shopping Cart .
But I can search on the basis of Item Customer field not on the basis of Header Customer Fields .
There is flaw in BBP_PDH_SEARCH_SC FM on header Cus. field .
Has anyone encounter these problem .
Thanks & Regards,
Sachin

Hi,
For SC,you cannot search on custom fields at the header level.
BR,
Disha.
Pls reward points for useful answers.

Similar Messages

Search Help for Custom field in Sourcing Cockpit

Hi SRM Experts,
I added custom field "rush order" in the Structures as per requirement. I added code in MODIFY_SCREEN function module. Search help is working for "rush order" in Process Purchase Orders (to search PO) and Check Status (Searching Shopping Cart). But it is not working in sourcing cockpit. Please guide or suggest me is there any additional settings or programming is required to have search help for custom fields in Sourcing Cockpit.
Thanks a lot in advance.
Thanks,
Koyya

Hi SRM Experts,
Please let me know any suggestion on this issue.
Thanks a lot in advance.
Thanks,
Koyya

Search on the custom field in Product doesn't work

Hello everyone!
Lately I was configuring additional custom field for product header and succeed. Then I wanted to add this field as a search criteria for product search and I followed help on help.sap.com and note 1026956. Here are the steps I did:
1. I've extended structures CRMT_PRIL_QUERY_ADVSEARCH_PROD and CRMT_PRIL_QUERY_ADVSEARCH_IOBJ with my custom attribute.
2. I went to Master Data->Products-> Basic Settings ->Add Attributes to Search Structure and added my custom attribute there.
3. Then I found out that it's not enough and I should perform additional steps not included in note and help. I did these steps suggested by Shanthala Kudva in thread [Can't enable the extendable set type attributes in product search UI|Can't enable the extendable set type attributes in product search UI;.
After that I was able to configure UI and see the search criteria, but when I try to search using custom field I get error message: "Search criteria PRODUCT_ANKER.ZCAT_NUMBER in scenario CL_CRM_PRSEARCHSCENARIO_GETLST not included in tool/filter"
How to find out the reason of this behavior? Did I miss something in configuration?
P.S. Set type called ZPRODUCT, attribute ZCATNUMBER. In structures appended component called ZCAT_NUMBER with component type ZCATNUMBER. In table CRMC_PRSEA_ATTR the record has the attributename ZCAT_NUMBER, attribute_id ZCATNUMBER. Maybe I messed up with that?
Regards,
Alex.

Hi Alexander,
I know this is an old post, but currently i am facing the same issue of not being able to see my custom fields in the BSP Component Workbench.
I tried to follow all steps maintained in SAP Note # 10269656 & 1541480, but no luck.
Can you please tell me what do you mean by "Should not add the extended attributes directly to Search Structure, as SAP expects the attributes to be in APPEND structure"? Can you please let me know how the values are to be maintained in the Search structure table "CRMC_PRSEA_ATTR", which is also accessed using the IMG Meanu path "Master Data --> Products --> Basic Settings --> Add Attributes to Search Structure"
Appreciate your help.
Suresh Karri

No search help for Custom field ZZKUKLA in vk11

Hi,
I have added the field KUKLA - Customer classification as a pricing field in KOMP. Created an access sequence as follows: Sales Org.-> Customer Classification - material group.
In the creation of the record in VK11 I'm not getting the search help for the ZZKUKLA field. The thing is that if I'm in change or display, the search help for the field appears and lists the possible values.
Anyone have a clue?
Thanks!
/Patrik

Dear Pratik,
Request you to first add Customer classification field (ZZKUKLA) in KOMK structure insted of structure KOMP. Becasue it is header structure filed. After add this new filed in KOMK structure, Add this new filed in your field catelog and than create table and new access sequence. Also request you to select KOMK structure in your access sequence against this new field Customer classification ZZKUKLA.
Regards,
Haresh Panara

Shopping Cart Search issue for Custom field

Hi,
I added one custom field into Shopping cart basic data tab. And it is also displaying in extended search place.
When i am trying to search the shopping cart using custom field i am not getting any result. But if i gave any Time Frame then it's picking up.
What is the reason it's not picking up without any condition.
I Appreciate any one share yours idea.
Thanks,
Senthil

Hi SRM Experts,
Please let me know any suggestion on this issue.
Thanks a lot in advance.
Thanks,
Koyya

Search help for custom fields added through BADI_FDCB_SUBBAS04

Hi guys
I have two cutom fields on basic data screen that i have added using an implementation of the BADI
BADI_FDCB_SUBBAS04
I want to use the value entered in one of the fields as a import parameter in another fiields search help. On value request the structure INVFO contains the other data entered on screen in the basic data screen however my custom fields appear empty.
However if i press enter and request values again the search help will pop up correctly. Is there a way i can avoid having to press enter before i can get my values??
regards
Isaac Prince

Hi guys
I have not found any notes/texts regarding my issue however i think with some user training/re-orientation the small issue will go away.
regards
Isaac Prince

Search help for custom field in SRM

Hi All,
Im new to abap. I want to add(enhancement) custom input field with search help function for organization unit. I hv added input field and its displaying in portal also.
Now i want to add f4 help. Can u please help me in this regard. Can u tell me the steps to do for adding f4 help.
Thanks,
Rani.

add search help to input fields data type. or you could assign search help via structure there that field is defined. you could enhance standard code adding custom search help which is called via FM. Choose the way.
best regards,
dez_

Search help for custome field with different data type

Hi Friends,
I have Created a custom table in which i have created a field is
ZMATLONG which stores material number.
Now the data element is zdmat which is of char 40..
Now i want to give search help for this field ZMATLONG..
I have tried many ways giving search help to this field
a) i Tried to attach the standard search help of MATNR ie : MAT1 but its showing me data type inconsistancy
b) i created a zsearch help and in the selection method i have used database table mara , again here iam getting the same error data type inconsistancy...
Now how can i give the search help like matnr field to my custom field ZMATLONG...
How can i do it..?
Thanks in Advance..
Regards
Kumar

Hi,
MATNR ahs length 18 and ZMATLONG has length 40.So due to this u cannot use MAT1 search help.
best way would be cope MAT1 into Z search help. Then in the search help parameter change the data element of field
MATNR as ZMATLONG.
Now if you assign Z search help to ZMATLONG it will work.
I tried this its working fine.
Shanmugavel Chandrasekaran

Add search help to customer field in ESS Leave

Hi All ,
I was able to add some required field on the screen by the customer fields like Country.
But some fields need search help, can anyone advice how to add search help.
Is it possible to add field from webdynpro code also , so that I can give search help from there also , if not possible from backend.
Thanks and Regards,
Nuzhat

it needs to be done from backend
you can customise the field to appear from the backend in the portal, and then add a code like a normal field has to build
a help
check ptarQ>customising > additional fields

How to add search help to customer field of field selection on ESS Screen?

Hi all,
I am able to get customer field CUSTOMER01 from field selection customization on leave application ESS Screen. How to attach search help which contains Holiday date & its description to this field?
Thanks,
Swapnali

Hi,
This is for working time -> leave request screen
In field selection there is one field 'code for description of illness'. I have done required config for getting this field on ESS Screen. This field already has standard search help. So I m able to view the values of this field on ESS screen .
So I thought to try assigning custom search help to this CUSTOMER0 field. Is there any method in BADI PT_ABS_REQ through which I can achieve the same. Please help.
-Swapnali

Enhance search functiponality with custom fields

Hi Experts,
I want to enhance component PRD01QR/Search with custom field in order to allow seraching for it. It is enhanced via set type. Please could you send me steps how to dpo it?
Thanks,
Juraj

Hello,
Maybe this helps:
http://scn.sap.com/thread/3151887
Best regards,
Thomas Wagner

"F4" search-help for custom field in PCUI

Hello all,
Does anyone know how I can create my own simple F4-help for a custom field I have added to a custom Tab Page in the PCUI? It should show a selection from a custom table.
I couldn't find an useable example in the PCUI-cookbook.
Any ideas anyone?
Kind regards,
Martijn de Jong.

Hi Manuel,
I saw that paragraph but didn't know how to implement it. Maybe you or someone else can explain/translate in steps what I have to do, according to the text underneath, i want to use a combobox:
"If you want the application to specify the values for selection (within popup or dropdown list box or
combobox (COBX respectively TIME)) at runtime instead of using predefined domain values, data
must be provided by the application via the method FILL_DROPDOWN_LISTBOX. That scenario
works if the field type is "Input Field" and the F4 application is set to "VALUE_TABLE". With these
customizing settings, the method FILL_DROPDOWN_LISTBOX of the interaction layer is called at
runtime and the actual field values will be passed to the application via importing parameter
IT_SCREEN_STRUCTURE. Thus the application can provide context-sensitive help values within a
popup or a dropdown list box respectively combobox (COBX respectively TIME). Within the popup
more than one column of values can be displayed."
How/where do I (re)define method FILL_DROPDOWN_LISTBOX? Do i have to maintain an own class? and how do i ensure that more columns are shown?
Kind regards,
Martijn de Jong.

Search help for customer field.

Hi all,
I have one select option on company code : bukrs
and one on customer number : kunnr
i want search help for kunnr which should be based on bukrs.
can any guide me how to do it.
any suggestion will be rewarded.
Regards
cnu

Table KNB1.
Rob

Reference field while extending Order Object with custom fields using EEWB

Hi,
I am using EEWB to extend Order. i have to add Quantity fields, while generation it gives the following error:
Diagnosis:
You must specify reference tables and reference fields for fields containing amount or quantity data. You have specified either only the reference field or the reference table and have not maintenance either ready.
Procedure:
Add the missing entry. You can do this with the single field maintenance function of the table.
Can someone explain what will I need to do? Is its a something outside EEWB which I would need to do.
Thanks,
SG.

Hi
check the item category table CRMD_ORDERADM_I (Item data) for necessary fields there u can find that
Item No
Item Number in Document
NUMBER_INT
Product ID
Product Name Entered
ORDERED_PROD
Quantity
Unit of Measure
PROCESS_QTY_UNIT
Unit
CRM Schedule Line Quantity
QUANTITY
Hope it helps u
Regards
Manohar

Displaying Custom field in shopping cart header

Hi all, I know how to add a field to header and item levels of the shopping cart.
- In the note 672960 it says 'Note that the header fields cannot be displayed for the shopping cart. If you define fields on the header, they can only be filled in BADIs.'
However,
We are able to fill in the name of the shopping cart on the third step, which is also a part of header information. Is there a possibility to add a custom field(the user must be able to fill it) and display it in that screen???

Hi
To add custom fields to the shopping cart, please try this process ->
Please refer to these links for details ->
Re: SC header CUF ?
Re: MAP USer SRM defined fields in backend for PO
Re: HI SRM experts...
Custom fields to a Bid Invitation
Addition of custom fields in Contract and mapping it with the fields in SRM
urgent help request - How to add custom fields to header BID.
Re: Add custom fields to Contract Transaction in SRM 4.0
Custom Fields
custom fields in Carry out sourcing screen..
Custom Fields Not Display In Basic Data In SRM 5.5 Server..
SC : Extended Search on Header Customer field
Re: customer field in 3rd step of shopping cart
Adding fields in shopping cart
Custom Field in the header of Shopping Cart
Please refer to these SAP OSS notes ->
Note 458591 - User-defined fields: Preparation and use
Note 672960 - User-defined fields 2
Note 822424 - CUF. Customer fields cannot be changed in the bid
Note 809630 - Customer field in bid invitation and bid - How does it work?
Note 809628 - Table like customer fields from bid invitation in bid
Note 798731 - Bid: Bid Inv. Customer fields not visible
Note 762984 - SRM40-SUS: Implementation of customer enhancement fields
Please go through the documentation of following 3 Business Add-Ins using SE18 transaction.
BBP_BUPA_GET_CUF Customer Fields for Vendor Master Data
BBP_CUF_BADI-Customer Fields. Call-up of User-Defined Screen
BBP_CUF_BADI_2-Customer Fields. Use of Standard Table Control
Hope this definitely help.
Regards
- Atul

SC : Extended Search on Header Customer field

Similar Messages

Maybe you are looking for