SC gone in to error while creating with attachment

Hi,
SCs gone in to error when ever i create SC with attachement.
error is : Shopping cart 3000349408 (PO 2000122875): 000
Can any one help on this..

Hi
Please provide the system details and version. Any errors noticed in RZ20, ST22, SLG1 or SM21 transactions, after creating a new shopping cart with attachements.
If yes, please provide the details as well.
<b>Meanwhile, please go through the following SAP OSS Notes, which might help -></b>
Note 550071 - FAQ: EBP - Shopping Cart
Note 848909 - Size of the table BBPCONT is very big.
Note 1030777 - Follow-on note to 848909. Size of the table BBPCONT is big
Note 1042048 - Short Dump in Purchase Order Header Notes and Attachment Tab
Note 932602 - Follow on note to note 891293
Note 964065 - Follow on note to note 932602
Note 891293 - LOIO_OBJID field empty for attachments in database
Note 67225 - Context memory overflows in ITS
Note 1008491 - BBPSOCO01:Problems with large follow on Docs
Note 668062 - Configuration of attachment display
Do let me know.
Regards
- Atul

Similar Messages

Error while creating the HTTP client with destination GB_DPSRetrieve

Hi All,
It is an interface R/3 -->XI --> HTTP ( proxy to HTTP ).
Please find the error log below and throw some light why the HTTP adapter is getting error -
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SOAP:Header>
- <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
<SAP:MessageClass>SystemError</SAP:MessageClass>
<SAP:ProcessingMode>synchronous</SAP:ProcessingMode>
<SAP:MessageId>DC98499F-7E42-74F1-A41F-0017A4107EE6</SAP:MessageId>
<SAP:RefToMessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:RefToMessageId>
<SAP:TimeSent>2007-11-21T15:51:30Z</SAP:TimeSent>
- <SAP:Sender>
<SAP:Party agency="http://sap.com/xi/XI" scheme="XIParty">GovernmentGateway</SAP:Party>
<SAP:Service>GGMailbox</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Sender>
- <SAP:Receiver>
<SAP:Party agency="" scheme="" />
<SAP:Service>SAP_DEV_ERP2005</SAP:Service>
<SAP:Interface namespace="http://sap.com/xi/HR">HR_GB_EFI_DPSretrieve</SAP:Interface>
</SAP:Receiver>
<SAP:Interface namespace="http://sap.com/xi/E-FILING_GB/2005">DPSretrieve</SAP:Interface>
</SAP:Main>
- <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:QualityOfService>BestEffort</SAP:QualityOfService>
</SAP:ReliableMessaging>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_CLIENT_DEST</SAP:Code>
<SAP:P1>GB_DPSRetrieve</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while creating the HTTP client with destination GB_DPSRetrieve</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
- <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="BS">SAP_DEV_ERP2005</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS">is.00.lbsth-tb1ci</SAP:Engine>
<SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info>3.0</SAP:Info>
</SAP:Hop>
- <SAP:Hop timeStamp="2007-11-21T15:51:30Z" wasRead="false">
<SAP:Engine type="IS" />
<SAP:Adapter namespace="http://sap.com/xi/XI/System">HTTP</SAP:Adapter>
<SAP:MessageId>DC98499C-A1EA-BEF1-B4DD-00110A63BF06</SAP:MessageId>
<SAP:Info />
</SAP:Hop>
</SAP:HopList>
- <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Date>20071121</SAP:Date>
<SAP:Time>155130</SAP:Time>
<SAP:Host>lbsth-tb1ci</SAP:Host>
<SAP:SystemId>XIS</SAP:SystemId>
<SAP:SystemNr>00</SAP:SystemNr>
<SAP:OS>Windows NT</SAP:OS>
<SAP:DB>ORACLE</SAP:DB>
<SAP:Language />
<SAP:ProcStatus>023</SAP:ProcStatus>
<SAP:AdapterStatus>000</SAP:AdapterStatus>
<SAP:User>PISUPER</SAP:User>
<SAP:TraceLevel>1</SAP:TraceLevel>
<SAP:LogSeqNbr>000</SAP:LogSeqNbr>
<SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
<SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
<SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
<SAP:PipelineElementId>60C3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
<SAP:PipelineService>PLSRV_CALL_ADAPTER</SAP:PipelineService>
<SAP:QIdInternal />
<SAP:CommitActor>X</SAP:CommitActor>
<SAP:SplitNumber>0</SAP:SplitNumber>
<SAP:NumberOfRetries>0</SAP:NumberOfRetries>
<SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
<SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
<SAP:PlsrvExceptionCode />
<SAP:EOReferenceRuntime type="TID" />
<SAP:EOReferenceInbound type="TID" />
<SAP:EOReferenceOutbound type="TID" />
<SAP:MessageSizePayload>0</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>2918</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>0</SAP:PayloadSizeRequest>
<SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
<SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
<SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
<SAP:Reorganization>INI</SAP:Reorganization>
<SAP:AdapterInbound>PLAINHTTP</SAP:AdapterInbound>
<SAP:AdapterOutbound>IENGINE</SAP:AdapterOutbound>
<SAP:InterfaceAction>INIT</SAP:InterfaceAction>
<SAP:RandomNumber>15</SAP:RandomNumber>
<SAP:AckStatus>000</SAP:AckStatus>
<SAP:SkipReceiverDetermination />
<SAP:Receiver_Agreement_GUID>24422A5646443F8E9D975D57A3EE8162</SAP:Receiver_Agreement_GUID>
</SAP:RunTime>
- <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.5</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.515</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_OUTBOUND_BINDING</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="PLSRV">PLSRV_CALL_ADAPTER</SAP:Name>
<SAP:Timestamp type="begin" host="lbsth-tb1ci">20071121155130.531</SAP:Timestamp>
</SAP:RunTimeItem>
- <SAP:RunTimeItem>
<SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
<SAP:Timestamp type="end" host="lbsth-tb1ci">20071121155130.656</SAP:Timestamp>
</SAP:RunTimeItem>
</SAP:PerformanceHeader>
- <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:TraceLevel>Information</SAP:TraceLevel>
<SAP:Logging>Off</SAP:Logging>
</SAP:Diagnostic>
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">SystemError message generated. Guid: DC98499F7E4274F1A41F0017A4107EE6</Trace>
<Trace level="1" type="T">Error during execution of message : DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="T">ApplicationMessage was (=RefToMsgId): DC98499CA1EABEF1B4DD00110A63BF06</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
</SOAP:Header>
- <SOAP:Body>
<SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7" />
</SOAP:Body>
</SOAP:Envelope>
Regards,
Kishore

Hi,
In the HTTP Receiver what is the Addressing Type used ? (URL Address or HTTP Destination).
If its URL Addressing Type, check if right Authentication Type is used with valid values and for HTTP Addressing Type check this HTTP Client Create Error, it could be helpful.
Also check if the Target system can be reached from the XI server to validate the configuration parameters.
Regards,
S.Santhosh Kumar

Error while creating the sales order with billing reference

hi alll
i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
cheers
shalsa007........

Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja

Error while creating delivery with reference to STO

Hi,
I am getting the following error while creating the delivery with reference to STO
Document is incomplete: You cannot save the delivery
Diagnosis:
When the system checked whether saving delivery was
permitted, it determined that the requirements stored in
Define Incompletion Procedures for this document do not
allow this subsequent function.
I have checked the following already:
1. Maintained shipping data for both the supplying and receiving plants.
2. Shipping tab exists in the PO
3. Shipping point determination is checked.
4. Customer masters created for both supplying plants and receiving plant for the sales area created for STO
5. Material master is available in both receiving and supplying plants.
It is working fine in one client. and giving a problem only in the other.not able to figure out where the error is. appreciate your suggestions
regards
joe

Hi Joseph,
First go to transaction "VUA4" and see what is the incompletion procedure asigned to your delivery type. Then go to
"OVA2" and see what are the fileds maintained in incompletion procedure of the delivery type and the status groups assigned to them. Now you go to "OVA0(ZERO) and see whether the status group allows to save the delivery. If it doesn't you can untick that check box. But if this is a live system , i doubt if you would be bale to do that. Any way one of the possible causes is storgae location missing. Kindly pelase let me know If you need any more infromation on this.
Regards,
Ram Pedarla

Error while creating the HTTP client with destination

Hi ,
I am getting this error while connecting to https location on receiver channel . The below error i am getting in SXMB_moni
Error while creating the HTTP client with destination
The receiver party is doing some security setting on there end and for that purpose we have provided the external IP address to them , after that we are getting the above error.
We have already installed the client certificate on our staging server , and have done the correct setting in SM59 and channel.

Check few things..
1) I believe you use specify destination for the addressing type field in the comm channel. If so make sure you entered valid target URL address in the SM59 of type http destination.
2) Check the validitity of the certificate. You can import the certificate both in java and abap stack.
3) Make sure certificate is installed as expected.
4) Send the request and talk to the target system and check what error information they get in their log related to ssl.

ORA-24344: success with compilation error While creating workspace

Hi,
We had an instance with db 9.2.0.5 and HTML DB 1.56.
First we upgraded database to to 10.1.0.4.Then we upgraded HTML DB to 1.6.1(Upgraded html db 1.5 to 1.6, Then applied patch 1.6.1 patch - 4173133)
Logged to the HTML DB as an administrator for creating application developer's workspace. I have got the error "ORA-24344: success with compilation error" while creating the workspace.
We are able to create the workspace successfully on HTML DB 1.5.
Any help is highly appreciated.
Thanks, Venkanna

Venkanna - Do you think the workspace creation was at least partly successful? I mean, can you login to it, can you see anything about it in the admin app, etc.? It would be useful to get a list of invalid objects in the new workspace's schema. If there are none, then get a list of invalid objects in FLOWS_010600.
Scott

Problems with FL Studio: "Error while creating the ASIO driver."

I'm trying to use ASIO with FL Studio with my SB Live 24-Bit USB sound card. However, whenever I select "Creative ASIO USB" as my output device, I get the message "Insufficient USB Bandwidth. This device will reset to its default ASIO settings.", followed by "Error while creating the ASIO driver."
I've tried unplugging all other USB devices, switching USB ports, using a PCMIA USB 2.0 card, using Monster USB cables; all to no avail. It seems to me that there is plenty of USB bandwidth available but ASIO simply refuses to work.
Here are my laptop's specs (it's ancient but still good enough to run FL Studio):
P4 3.40GHz HT
1024MB PC3200 DDR RAM
SB Live 24-Bit USB sound card
128MB ATI Mobility Radeon 9700
Any suggestions?

So I guess no one could help me then?
It's OK, though, because I figured out the problem on my own. I had to change the "Device Control" settings in the Control Panel from 16 to 24-bit. Don't know why this would affect USB bandwidth, but whatever.

Error while creating a recipe in plm..

Hi every one,
System throughing below error while creating a recipe.
"Entries in status management Customizing are incorrect"
kindly suggest.
have a good day..
regards,
kirran

Hi Kirran,
Please see if you have defined a status scheme and assigned it to the recipe type. Before defining a status scheme, you must complete the one time IMG activity 'Collect Object Types and Assigned Attributes' under Recipe Development > Status Management. Then in the next node you define individual statuses and a scheme with transitions. For each status, you must define 'field value' for the field RCP_USAGE which is nothing but a value from Recipe Purposes customizing.
Hope this helps.
Regards,
Rajeev

Error while creating a PO

Hi all,
I have got an error while creating a PO with an Internal Order. I am trying to post this PO against an Internal Order. The error message says that:
User status BUDG is active (ORD 10034). When I click the perform assistant, it says that according to this status, transaction 'Material purchase order' is not allowed.
Can somebody plss help me in this regards, I will assign points.
Thank you,
Sony

What you enter in the Cost element master data is only for defaulting the cost center or order when you use that GL account.
When you see a message transction requires an account assignment, you can enter the relevant cost center for which the cost is incurred.
For your information, If an order has been marked as statistical, you can find it in KO02 change order > Control data. there may be check box saying statistical. If it is not available, then, you can't make it statistical until, you make that field available for change for the order type. Usually orders of a particular type can be made as statistical, by providing a model order to the order type. In the model order you specify that it will be statistical.

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error while creating a Development plan template

Hi Gurus,
I am facing errors while creating Development Plan Template.
This is how it goes :
When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
Now after clicking next, I am adding 2 development areas :
1) Training
2) Mentoring,
now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
error2 : Value type 000000XXX of value class Q does not exists
Warning 1 : You have maintained a description that is not displayed.
In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
Kindly let me know how to proceed further.
Regards
bharti

Hi,
Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
But when I run the Concurent program and see the output,the output still shows me the old template.
Regards
Jujaar

Error while creating a Solaris Resource

I got the following error while creating the following solaris resource:
Test connection failed for resource(s):
Solaris: Script failed waiting for "ASSWORD:" in response "_,)#+(:" ==> com.waveset.util.WavesetException: Script processor timed out with nothing to read and the following unprocessed text: "_,)#+(:".\n
I have the sudo permissions for the following commands:
(ALL) NOPASSWD: /usr/bin/auths, /usr/sbin/groupadd, /usr/sbin/groupdel, /usr/sbin/groupmod, /usr/bin/last, /usr/bin/listusers, /usr/bin/logins, /usr/bin/passwd, /usr/bin/profiles, /usr/bin/roles, /usr/sbin/useradd, /usr/sbin/userdel, /usr/sbin/usermod, /usr/bin/ypmatch, /usr/bin/ypcat, /usr/bin/ypasswd, /usr/bin/awk, /usr/bin/cat, /usr/bin/chmod, /usr/bin/chown, /usr/bin/cp, /usr/bin/cut, /usr/bin/diff, /usr/bin/echo, /usr/bin/grep, /usr/bin/ls, /usr/bin/mv, /usr/bin/rm, /usr/bin/sleep, /usr/bin/sort, /usr/bin/tail, /usr/bin/touch, /usr/bin/which
Please let me know what could be the problem?

This doesn't look like a Sun Directory Server issue. You may want to post this to another forum.
Regards,
Ludovic.

Error while creating a new entity row for LoginPageEO.jbo.RowCreateExceptio

hi all, i am new to OAF i have created a login page and trying to validate to a custom table which had two columns username and password, i am calling function from controller class which is in AM and from AM in turn i am calling function in VOimpl.java file where i am executing my query with whereClause, i am passing two parametere username and password to this function.
if ((uname != null) && (!("".equals(uname.trim()))))
whereClause.append(" UNAME = :");
whereClause.append(bindCount++);
parameters.addElement(uname);
clauseCount++;
if ((pass!= null) && (!("".equals(pass.trim()))))
if (clauseCount > 0)
whereClause.append(" AND ");
whereClause.append(" PASSWORD = :");
whereClause.append(bindCount++);
parameters.addElement(pass);
clauseCount++;
setWhereClause(whereClause.toString());
if (bindCount > 0)
Object[] params = new Object[bindCount];
// the copyInto() is 1.1.8 compliant which is required by ARU
parameters.copyInto(params);
setWhereClauseParams(params);
//System.out.println(getQuery());
executeQuery();
//System.out.println(getRowCount())
when i call this from login page i am getting
Error - oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for LoginPageEO.
Can any one help me out.

If your requirement is not to update any DB Table then don't use an EO. I would suggest the following for your requirement of validating the username and password.
- Create a VO that has the following query. Do not select any EO during the VO creation.
          SELECT 'x'
          FROM <CUSTOM TABLE>
          WHERE <USERNAME COL> = :1
              AND <PASSWORD COL> = :2
        - Have the initQuery(..) Method in your VOImpl, that takes the username and password. Binds them to the VO and executes the query.
- Have a method in your AM to take the username and password as parameters. Make a call to the above VO::initQuery(..)
- In your controller's processFormRequest(..) call this AM Method upon the submit button action.
This should work smoothly.
The following is just for triaging the error that you have. The above steps, should help you achieve your requirement by itself, the below steps would not be required.
Coming back to your issue. Any custom table should have the standard WHO Columns.
- Modify the custom table to have these who columns.
- In the EO Wizard, synchronize the EO to reflect the DB Structure.
- Make sure the EO Attributes are marked updatable.
Cause of your issue: Through you are not creating EO rows programatically, whenever a VO is based on an EO, upon execution of the VO query, EO's are automatically created, based on the number of rows returned by the VO Query. So internally its failing to created the EO Rows. On of the common reason would be that it creates the EO row, but cannot set the attributes from the VO, because the EO Attribute is readonly.
Hope this clarifies.

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Error while creating a new entity row for testEO

Hi All,
I have a 1st page where I enter the employeeNumber and that particular parameter should get displayed in the 2nd page when I click on the "SubmitButton".I am moving to the 2nd page using pageContext.forwardImmediately.I am passing my parameter with this URL.But, I am getting "Error while creating a new entity row for testEO" in my code before i enter anything in " employeeNumber " field in the 1st page.
My CO code is:
/*===========================================================================+
| Copyright (c) 2001, 2005 Oracle Corporation, Redwood Shores, CA, USA |
| All rights reserved. |
+===========================================================================+
| HISTORY |
+===========================================================================*/
package xxfc.oracle.apps.test.OAProject1.webui;
import com.sun.java.util.collections.HashMap;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.OAWebBeanConstants;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.message.OAMessageTextInputBean;
import oracle.jbo.Row;
import xxfc.oracle.apps.test.OAProject1.server.testVOImpl;
* Controller for ...
public class testCO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am =(OAApplicationModule) pageContext.getApplicationModule(webBean);
testVOImpl vo1 = (testVOImpl)am.findViewObject("testVO1");
vo1.executeQuery();
Row r = vo1.first();
System.out.println("**************Error in the below Line**********************");
Row row = vo1.createRow();
vo1.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
OAApplicationModule am =(OAApplicationModule) pageContext.getApplicationModule(webBean);
OAViewObject vo1 = (OAViewObject)am.findViewObject("testVO1");
if(!vo1.isPreparedForExecution())
vo1.executeQuery();
Row row = vo1.getCurrentRow();
am.getOADBTransaction().commit();
String strEvent = pageContext.getParameter(EVENT_PARAM);
if (strEvent.equals("update"))
String custId = pageContext.getParameter("CustID");
pageContext.putParameter("CstID",custId);
HashMap hashMap = new HashMap();
hashMap.put("CustomerId",custId);
am.getOADBTransaction().commit();
pageContext.forwardImmediately("OA.jsp?page=/xxfc/oracle/apps/test/OAProject1/webui/popupPG&CustID=custId",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
hashMap, //hashmap
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_YES
thanks,
Akshata

Hi Niranjana,
It did not work I am getting the same error.does the WHO column order in the table matters? My WHO columns are in the below order:
LAST_UPDATE_DATE
LAST_UPDATED_BY
LAST_UPDATE_LOGIN
CREATION_DATE
CREATED_BY
my error is:
oracle.jbo.RowCreateException: JBO-25017: Error while creating a new entity row for testEO.
It appears on the top of my page as a message.
Thanks,
Akshata
Edited by: Akshata on Mar 15, 2012 12:29 AM

SC gone in to error while creating with attachment

Similar Messages

Maybe you are looking for