SC items added to Work Area

Hello,
I would like to have confirmation about SC process in Sourcing when added to Work Area using 'Find' tab or 'Worklist' tab.
In both cases, if SC items from Requirements table overview are added to Work Area, rows selected are transfered and not copied, aren't they ?
By "transfered" instead of "copied" i mean SC items added to Work Area are no longer displayed in table overview of Requirements.
Thank you for your answers.
Regards.
Laurent.

Hello Pradeep,
I wrote a message to OSS regarding this process.
As i expected, when a requirement is selected and added to the workarea, it is actually transfered and not copied. When the requirement is in the workarea, you can no longer see it in the list above.
So, there is no mismatch when using 'Worklist' tab or 'Find' tab.
Regards.
Laurent.

Similar Messages

  • HOLD button in the work area

    Hi All
    When Buyer can HOLD (button ) functionality .
    even we add sc item into the workarea sc is available for buyer forever . Why HOLD functionality is required for the BUYER.
    What is the SAP definition for thiS HOLD functionality in ****[pit work area.
    Muthu

    Thanks Pedro !!
    for example
    sc 1000/1 - i added to work area (by Muthu)  and others can not source other than Muthu . so pedro and matew can not source.
    it internal meaning is that other BUYERS are protected that cart .
    1000/1 taken to cockpit and put HOLD by Muthu , now pedro and mathew can not search and assign this cart into their workitem.
    PLEASE CORRECT ME MY ASSUMPTIONS IF I WERE WRONG.
    Muthu

  • Dump while adding a shopping cart in work area in Carryout Sourcing

    Hi Experts,
    We are getting dump while adding a shopping cart to the work area in Carryout Sourcing.
    We want to replicate the Purchase Requisition from R/3 to SRM. And SC contains the limit item with free text service.
    The dump details are as follows :
    The exception 'CX_BBP_PD_ABORT' was raised, but it was not caught anywhere
    along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLBBP_PDH' has to be
    Error analysis
        An exception occurred which is explained in detail below.
        The exception, which is assigned to class 'CX_BBP_PD_ABORT', was not caught and
        therefore caused a runtime error.
        The reason for the exception is:
        Buffer table not up to date
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "UNCAUGHT_EXCEPTION" "CX_BBP_PD_ABORT"
        "SAPLBBP_PDH" or "LBBP_PDHU08"
        "BBP_PD_ABORT"
    Information on where terminated
        Termination occurred in the ABAP program "SAPLBBP_PDH" - in "BBP_PD_ABORT".
        The main program was "SAPLBBP_SOCO_UI_ITS ".
        In the source code you have the termination point in line 73
        of the (Include) program "LBBP_PDHU08".
      READ TABLE lt_callstack INTO ls_callstack2 INDEX 4.
      CONCATENATE   '/' ls_callstack2-eventtype
                    ls_callstack2-eventname ls_callstack2-progname
                    INTO lv_msgarg3 SEPARATED BY space.
      CALL FUNCTION 'BBP_ALERT_INTERNAL_OT'
        EXPORTING
          msgid   = gc_msgid_bbp_pd
          msgno   = 047
          msgarg1 = lv_msgarg1
          msgarg2 = lv_msgarg2
          msgarg3 = lv_msgarg3.
      MESSAGE ID gc_msgid_bbp_pd TYPE c_msgty_i NUMBER iv_msg_no
              WITH ls_callstack1-eventtype
                   ls_callstack1-eventname
                   ls_callstack1-progname.
      rollback work.
    get the messages from the application log
      TRY.
          CALL FUNCTION 'BBP_PD_LOG_GET_MESSAGES'
            TABLES
            e_messages = lt_messages.
        CATCH cx_bbp_pd_abort.
          REFRESH lt_messages.
      ENDTRY.
      RAISE EXCEPTION TYPE cx_bbp_pd_abort EXPORTING
          worked_on_document = lv_guid
          t100_msgid = gc_msgid_bbp_pd
          t100_msgno = iv_msg_no
          t_appl_log_messages = lt_messages.
    ENDFUNCTION.
    Could you please help me on this, how to rectify the dump ?
    Thank you very much in advance.

    Hello,
    I have seen this dump many times because the ERP version defined in table BBP_BACKEND_DEST was not correct.
    Please, check the following note related to this configuration:    
    1230789 - Dump: BBPSOCO01 at include LBBP_PDH_TEOF0B               
    Kind regards,
    Ricardo

  • Item & for schedule line & is in the work area

    Hi All,
    We added some custom fields on the schedule line tab and also in VBEP table. For thie same we also added code in the PBO module of SAPMV45A/4500 screen#. Since we added the code we are getting the error message# V1357 with description 'Item 000010 for schedule line 000040 is in the work area'.
    I did check the forum and found couple of notes with this error and some replies say that it is for the quality issue. I tried going to OQ77. But i am pretty sure it is because of what i codded. Because When i comment my code so error shows up. But I am not sure what is the problem with my code.
    Here is the sample of my code that i wrote in my PBO module:
        IF  XVBEP-VBELN IS NOT INITIAL.
            INPUT = MARA-BRGEW * XVBEP-WMENG.
            PERFORM CONVERSION.   "This is the module that i wrote to convert from G to LB.
            XVBEP-ZTOTALWT = OUTPUT.
            xvbep-updkz = 'U'.
            modify xvbep index ivbep-tabix.
        ENDIF.
    Please let me know if i am doing wrong anywhere in the code.
    Thanks,
    Karuna.

    Issue: I got the issue resolved. The mistake i made was the local structure was holding last item which has 1 schedule line and the my first item10 was having more than 1 schedule lines and trying to loop all the schedule lines. As the last item has only one schedule line i was getting the problem.
    Solution: I reset the structure to that it will loop from the first line item instead of it holding the last item#.
    Hope this helps.
    Karuna

  • Adding container headstart to 'GLOBAL WORK AREA'

    I am trying to install HEADSTART 10G r2 for designer 10.2 into Designer. I got everything working the demo, utilities and the designer forms templates.
    Finally I want to imported the headstart 10G R2 Dump file (versioned) into designer. The import did not work first because we needed to use IMP 10.2 but designer uses IMP 10.1. But that problem is solved.
    At the moment I have a container with headstart 6.5.4.0a which I want to include (with Edit Workarea of Include Workarea) into the WA 'GLOBAL WORK AREA'. But that failes with the error message
    - CDR-01006: Failed to process rule specification.
    - CDR-01059: Rule INCLUDE_FOLDER has an invalid path (headstart=Application
    - CDR-01000: Unable to locate object with path headstart=Application System.
    I did everything mentioned in the document 'installation instructuctions for oracle Headstart 6.5.4.0 for 10g R2'.
    please can anybody give me a clue what I can do to include this container in the WA.
    Thanks
    Franc

    To add to the above, I've been using WSBR_API.ADD_ITEM(p_text, ...), and when I check out the WWSBR_ALL_ITEMS it would seem as though the text field is a CLOB. This would lead me to think that my error is caused by me trying to push a CLOB through a VARCHAR2.
    What's the standard way, using the API, of adding an item that is a CLOB?

  • CS5.5 - Go to previous or next visible item in time ruler (keyframe, marker, work area beginning or

    The
    Go to previous or next visible item in time ruler (keyframe, marker, work area beginning or end)
    J & K
    Does not work at all here.
    Perhaps I am misunderstanding the nature of this feature but from reading the text in the manual I would come to expect
    that hitting i.e. J&K - would go the next visible item in the ruler be that a Keyframe or Marker etc... However, when I hit K timeline takes me to the end of the composition and J to the beginning. And I have a lot of markers set.
    Any Ideas
    Thanks

    It works on layer markers and keyframes, but not comp markers. Furthermore, it will also not work, if index items have been scrolled out of view or are shy even if the property streams and their keyframes are otherwise visible. This has never been any different, but it's quite annoying.
    Mylenium

  • Hi - my creative cloud app is just showing a blank screen, i can't see my apps or any other items? My apps are working ok but i need to go onto type kit and can't see it

    Hi - my creative cloud app is just showing a blank screen, i can't see my apps or any other items? My apps are working ok but i need to go onto type kit and c
    an't see it

    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  • Render Work Area every time text or a transition is added?

    Why do I have to Render the Work Area every time I add text or a transition In PRE 10? The video then starts playing from the beginning and I have to find where I was editing. It wastes too much time and takes forever to edit a video. I was told by Adobe phone support that Rendering after a transition is normal; I can't believe the program is that bad!

    For just Text Titles, I am surprised that you need to Render, with each Title.
    I often edit hour-long Projects, and usually never need to Render, to see good playback. For most, the only time that I do Render, is when I have animated something, and it must playback with ultimate quality.
    Some NLE (Non Linear Editor) programs do "Background Rendering," but if you think editing in PrE is slow, you will likely not be able to do much of anything, when that Background Rendering is taking place. IIRC, Pinnacle Studio added that, many years ago, but most users clamored for a way to turn that OFF, as they had to wait, while every change they made was rendered.
    In my case, I am editing on an older workstation, and on a fast, but old, laptop. Both are running XP-Pro, so only have 4GB of RAM. For me, and on either computer, the playback just does not require that I Render, except for those mentioned animations, and then I Render just that Title, Clip or Still Image, until I know that I have what I want.
    Sorry that PrE is not for you. Some users have sung the praises of Sony Vegas Pro, and some CyberLink's PowerDirector, and Magix MovieEdit Pro. I have the latter two, but do not like to edit in either. I just use them for some very specialized file-types, when I need them.
    Good luck,
    Hunt

  • Item added to master not showing up cs4

    Hello all,  so here's my dilemma, I started a document that had left and right master pages. This document was used for various publications so items kept changing while the structure of the master remained. If I needed to edit, I overrode the master page to delete or edit items. Recently I changed an item on the master and it didn't change in my document. I selected the spot on each page and chose to 'remove override' and that solved the issue. It was a pain because I had to do it manually to alot of pages but it worked.   So now I've been told to add something to the page. I create a new text box on the master and place it where it's needed, but it's not showing up on any pages. I assume this has something to do with the initial override of each page, but I figured as a new item it wouldn't take on that attribute. The only way I seem to be able to get it to appear is to manually remove the override for the entire page, but then any other edits Ive made default to the the original master - meaning I'd need to go through and change all those again manually - a lot of work I want to avoid.   My question is this - can I not add a new item to a master and have it appear on all pages associated to that master regardless of if that page has already been overridden? It seems to be able to keep some items working even through the override (like page numbers) so I'm hoping the solution is simple and likely something obvious I'm missing.   Thanks in advance.

    Your description is a little hard to follow, but I think I've got the gist. New items added to the master page should show on all pages to which the master is applied, but if you've overridden other objects on the live pages and they overlap the new object, they are going to be in front of it on the live page, even if they are behind it on the master.
    On any given layer, all master objects are behind all objects on the document page. if you have a situation wher you need a master object in front of a live object, add a layer and move it to the higher layer. Give that a try and see if it solves your problem.
    And a general bit of advice. If an object is being overridden from the master page you need a REALLY good reason for it to have been on the master page to begin with. The whole point of master objects is they generally don't change, or if the do, they need to change everywhere. Perhaps you need more than one master, built in a "based on" heirarchy, so that you can edit a master object for a group of pages at a time.

  • Get All Values From NewForm.aspx using Event Receiver Item Adding

    HI All,
             I have conditions to check before the insertion of "Calendar Event".For this I am using Item Adding Event Receiver ,When Click on Save button I need to get all the values of Items filled in NewForm.aspx and check
    the condition,If condition satisfies make them insert else show alert info  as"Not Valid",Below is code and error message
    public override void ItemAdding(SPItemEventProperties properties)
                base.ItemAdding(properties);
               string StartTime = properties.AfterProperties["Start Time"].ToString();
               string EndTime = properties.AfterProperties["End Time"].ToString();
    Error
    Object reference not set to an instance of an object.
    Use the New "Keyword to create an object instance
    Can any one help me how can I do it.
    Thanks,
    Quality Communication Provides
    Quality Work.
    http://siddiq-sharepoint2010.blogspot.in/
    Siddiqali Mohammad .

    Hi,
          Have you tried with the code snippet as mentioned below
    string EndDate = Convert.ToString(properties.AfterProperties["EndDate"]);
    string StartDate = Convert.ToString(properties.AfterProperties["EventDate"]);
    If my post is helpful - please click on the green arrow to mark it as answer

  • I have added a work colleague to my family's members on iCloud so we can share the calendar for work appointments. However whe heakes purchases on iTunes I now get charged. How can I stop this happening?

    ive added my work coleague to my iCloud account so we can share the calendar on our I-phones for work appointments. when he makes a purchase on iTunes i now get charged though so how do I stop this from happening? also can I just share only work appointments or do i have to share the whole calendar with him? Can I select what he sees?

    Hi Frantic503,
    Welcome to the Apple Support Communities!
    When you are the Family Sharing organizer, purchases are billed to your account unless the family member making purchases has an iTunes Gift Card or iTunes credit on their account. The attached article has more information on how this process works. 
    Family Sharing - Apple Support
    What I may suggest in your situation would be to discontinue the Family Sharing and use iCloud calendar sharing. Using this method keeps your accounts separate but allows you to still share your calendar. 
    iCloud: Share a calendar with others
    Have a great day,
    Joe

  • How to cancel the event in Item Adding and display javascript message and prevent the page from redirecting to the SharePoint Error Page?

    How to cancel the event in Item Adding without going to the SharePoint Error Page?
    Prevent duplicate item in a SharePoint List
    The following Event Handler code will prevent users from creating duplicate value in "Title" field.
    ItemAdding Event Handler
    public override void ItemAdding(SPItemEventProperties properties)
    base.ItemAdding(properties);
    if (properties.ListTitle.Equals("My List"))
    try
    using(SPSite thisSite = new SPSite(properties.WebUrl))
    SPWeb thisWeb = thisSite.OpenWeb();
    SPList list = thisWeb.Lists[properties.ListId];
    SPQuery query = new SPQuery();
    query.Query = @"<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>" + properties.AfterProperties["Title"] + "</Value></Eq></Where>";
    SPListItemCollection listItem = list.GetItems(query);
    if (listItem.Count > 0)
    properties.Cancel = true;
    properties.ErrorMessage = "Item with this Name already exists. Please create a unique Name.";
    catch (Exception ex)
    PortalLog.LogString("Error occured in event ItemAdding(SPItemEventProperties properties)() @ AAA.BBB.PreventDuplicateItem class. Exception Message:" + ex.Message.ToString());
    throw new SPException("An error occured while processing the My List Feature. Please contact your Portal Administrator");
    Feature.xml
    <?xml version="1.0" encoding="utf-8"?>
    <Feature Id="1c2100ca-bad5-41f5-9707-7bf4edc08383"
    Title="Prevents Duplicate Item"
    Description="Prevents duplicate Name in the "My List" List"
    Version="12.0.0.0"
    Hidden="FALSE"
    Scope="Web"
    DefaultResourceFile="core"
    xmlns="http://schemas.microsoft.com/sharepoint/">
    <ElementManifests>
    <ElementManifest Location="elements.xml"/>
    </ElementManifests>
    </Feature>
    Element.xml
    <?xml version="1.0" encoding="utf-8" ?>
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <Receivers ListTemplateId="100">
    <Receiver>
    <Name>AddingEventHandler</Name>
    <Type>ItemAdding</Type>
    <SequenceNumber>10000</SequenceNumber>
    <Assembly>AAA.BBB, Version=1.0.0.0, Culture=neutral, PublicKeyToken=8003cf0cbff32406</Assembly>
    <Class>AAA.BBB.PreventDuplicateItem</Class>
    <Data></Data>
    <Filter></Filter>
    </Receiver>
    </Receivers>
    </Elements>
    Below link explains adding the list events.
    http://www.dotnetspark.com/kb/1369-step-by-step-guide-to-list-events-handling.aspx
    Reference link:
    http://msdn.microsoft.com/en-us/library/ms437502(v=office.12).aspx
    http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspx
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

    Recommended way for binding the list event handler to the list instance is through feature receivers.
    You need to create a feature file like the below sample
    <?xmlversion="1.0"encoding="utf-8"?>
    <Feature xmlns="http://schemas.microsoft.com/sharepoint/"
    Id="{20FF80BB-83D9-41bc-8FFA-E589067AF783}"
    Title="Installs MyFeatureReceiver"
    Description="Installs MyFeatureReceiver" Hidden="False" Version="1.0.0.0" Scope="Site"
    ReceiverClass="ClassLibrary1.MyFeatureReceiver"
    ReceiverAssembly="ClassLibrary1, Version=1.0.0.0, Culture=neutral,
    PublicKeyToken=6c5894e55cb0f391">
    </Feature>For registering/binding the list event handler to the list instance, use the below sample codeusing System;
    using Microsoft.SharePoint;
    namespace ClassLibrary1
        public class MyFeatureReceiver: SPFeatureReceiver
            public override void FeatureActivated(SPFeatureReceiverProperties properties)
                SPSite siteCollection = properties.Feature.Parent as SPSite;
                SPWeb site = siteCollection.AllWebs["Docs"];
                SPList list = site.Lists["MyList"];
                SPEventReceiverDefinition rd = list.EventReceivers.Add();
                rd.Name = "My Event Receiver";
                rd.Class = "ClassLibrary1.MyListEventReceiver1";
                rd.Assembly = "ClassLibrary1, Version=1.0.0.0, Culture=neutral,
                    PublicKeyToken=6c5894e55cb0f391";
                rd.Data = "My Event Receiver data";
                rd.Type = SPEventReceiverType.FieldAdding;
                rd.Update();
            public override void FeatureDeactivating(SPFeatureReceiverProperties properties)
                SPSite sitecollection = properties.Feature.Parent as SPSite;
                SPWeb site = sitecollection.AllWebs["Docs"];
                SPList list = site.Lists["MyList"];
                foreach (SPEventReceiverDefinition rd in list.EventReceivers)
                    if (rd.Name == "My Event Receiver")
                        rd.Delete();
            public override void FeatureInstalled(SPFeatureReceiverProperties properties)
            public override void FeatureUninstalling(SPFeatureReceiverProperties properties)
    }Reference link: http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspxOther ways of registering the list event handlers to the List instance are through code, stsadm commands and content types.
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

  • Issue in 7.3 - The Work area is not long enough

    Hello All,
    currently i am facing issue in my new BI 7.3 server when i try to execute planning sequence, i am getting the below error:
    We have recently moved from 7.0 to 7.3 version very recently and when i try to execute the planning seq it raises above shown error but we have the same code in the BI 7.0 and nevere faced any issue while execution of Planning Sequence and we din't even changed the code.
    we are using this Work area <WA_STATUS> in Customer exit and also in the Program.
    It will be so helpfull if you let know why it is raising error and also wanted to check have any one faced simmilar issue in 7.3.
    Thanks in Advance,
    PJ.

    Hello Yogesh,
    Thanks for your reply!!!
    We have solved the issue.
    the issue is really due to after 7.3 Upgradation the RSPC_MONITOR had two more new feilds added
    1) UNAME & 2) CHECK_TIME
    and this fields doesn't exist in the 7.0 Version so due to this inconsistancy the Structure was failing.
    so we have included two new Fields in the structure in the program and in the Customer Exit and working fine now.
    With Regards,
    PJ.

  • Schedule lines and work area

    Hi All!
    While entering the multiple line items in the sales order(Quotation) screen , at the 60th item the system throws following error message :
    System : Schedule lines of Item 000060 is not in Work are.
    Has anyone ever came across such message during quotation creation?
    Early reply will be appreciated!
    Thanks,
    Mamata

    Hello Sir,
    We have the same issue appearing
    Item XX for scheduled line XX is in the work area
    I am not too sure about the T-Code OQ77 mentioned above. Could you please let me know the reason behind this error as the sales order the error message is appearing is a standard order (Norm Item).
    I am not sure how to get rid of this error as it is appearing in a number of sales orders
    Thanks in advance for the replies
    Regards,
    Doss

  • System message 38 from work area ssfcomposer does not exist in va03

    Hi,
    I created a smartform copy from standard, it is working good for all sales order,but for perticular one sale order it shwing error like
    system message 038 from work area ssfcomposer does not exist.
    i have long item line in this sale order what can i do please help me.
    Regards
    KK

    If I am not wrong, I guess you are using template/table inside your smartform.. which is causing the error.
    I issue could be because of the condition on the text inside the template which might be overlapping the output structure line and column. The issue can be also be because of your table cell.
    To trouble shoot place a false condition(like 1 = 2) first on table and if error still occurs then remove condition on table and place it on structure.
    I guess, the above answer will help you to close the thread.
    Regards,
    SaiRam

Maybe you are looking for