SC with awaiting approval status and no work item for Approvers.

Hi Experts,
We are implementing Classic scenario with SRM7.0 and we are having Application controled Workflow.
We are fasing issue in workflow. On SC getting ordered the status is showing as awaiting approval and there is no work item found in BBP_PD.
When we approve this SC in SWO1 then there is no PO getting created.
If the SC value is less than spend limit we have enabled no Workflow and in that case the approval agent table is showing as System Approver and after SC getting ordered the SC is still with the status Awaiting approval.
Can any once have an idea how to go about with this issue.
Regards,
B.N.Karthikeyan

Hi,
Did you check the event linkage in SWE2? what do you see in SLG1? Did activate the task groups 40000003 and 40000007? also check in SM58 and SM21..
Saravanan

Similar Messages

Buyer change the PO line items and end up with Awaiting Approval status.

Can you please help to look into this issue.
1.Buyer change the PO line items and end up with Awaiting Approval status.
2. But user claim that she got enough limit and should not route to her manager's approval. Also check with her manager and this PO do not exist his queue.
Any clue or tips on how to investigate on this issue. All your tips are appreciated,
-Rick

You cannot change these POs because their changed version has status
'Deleted'. My proposal to fix them will be the following:
You will have to set changed version as closed(DOC_CLOSED set to X)
and in active version set DOC_CLOSED to space.
__-For the above statement, Can you guys please let me know, which table DOC_CLOSED belongs to and what are the steps to do this, as i come from a functional back ground.__

I have an apple tv but lost the controller I connected my apple tv to my internet with an ethernet cable and it worked fine for the past week it has now stopped working

id also like to mention that before it stopped giving me the option to use airplay on my iphone, i had disconnected my apple tv because it was in the sun while i was watching it, and a message popped up saying "temperature: your apple tv is over heating. this message will dissapear when your apple tv is ready,"

Take it in to Apple

How do we identify SC that are stuck in awaiting approval status?

All,
Extended Classic Scenario   7.01
We have Shopping Carts set up for auto approval.    From time to time some Shopping Carts get stuck in awaiting approval status and we need to manually force them to go.   We have not been able to identify a root cause for this so we would like to create an abap that would identify those SCs that are stuck then submit   BBP_REQREQ_TRANSFER   to transfer those SCs.
The problem we are having is finding the correct combination of status's that will capture those SCs that are truly awaiting approval.
We first find all those SC with status = I1015 (awaiting approval)
Then we exclude those with status i1040 (deleted) and i1129 (followon document created)
It seems in our testing that sometimes the status i1129 has an "X" in the inactive column.   Should those then be reprocessed and therefore not excluded?
Thoughts...
Sandra

Hi Sandra,
For your code logic, I1129 with inactive X should be included to get the list of SC which are in awaiting approval or may be approved but without follow on doc.
But could you check if you get any message in RZ20 after the follow on doc is created and it becomes inactive ?
may be you can check the SAP note: 1499352 - SRM Transfer: Redesign, bug fixes
Best Regards,
Anil

Po in awaiting approval status in SRM 4.5

Hello Friends,
I am working on SRM 4.5,
I am facing a problem in completing the workflow of a PO. My SC is approved the PO which is created is with the status
Stats:
HEADER     E0002
HEADER     I1015          Awaiting Approval
HEADER     I1021          Created
HEADER     I1038          Complete
HEADER     I1043          Ordered
and workflow status:
Workflow Item:
Workitem-ID        000041330725
Task               WS14000145
Text               BAdI approval for Purchase order no. 2001013185, GUID 94E89401F7EF8A4EA8898F4A67A288F5
Status             STARTED
Statustext         In Process
Date               29.04.2014
Time               16:22:55
Now what should i do to complete the workflow. Is there any transaction or function module or any table with which i can complete the workflow??
Thanks in advance,
Sarnava.

Hi Sarnava,
Is your PO waiting for approval or is it struck in awaiting approval status.
Check SM58 transaction to see if there is any failures on the day of PO creation.
If there is no failure and you want to complete the PO manually go to transaction SWIA and enter the header work item id and then click on complete manually. This will complete the workflow.
Regards,
Suresh

SP2010 Designer workflow "Set Content Approval Status" does not work

Hello
I'm having a problem with a workflow for one of my clients.It is a SharePoint 2010 environment and I can only use SharePoint 2010 designer (no visual studio).
We have an approval workflow in place, which works great. After the document approval workflow has does its thing, a new workflow can be launged by specific users (they have writing rights and can approve content). The workflow is used to set the release
date of the document. This can only be determined after content approval.
However, when the release date is set, the document approval status is changed to concept. This is of course to be expected, as we changed to document metadata. That is why I wanted to add the action "Set content approval" to this workflow. I cannot
seem to get this action to work. Right now the workflow does the following:
check out the document (check out is obligatory in our library)
set the release date field to the released date parameter (defined when starting the workflow)
check in the document
set content approval to approved.
The release date gets set to the parameter value, but the document is not checked in and the content approval status is not set. SharePoint produces the following error message (translated from Dutch): "An error occured. Cannot edit the item, possibly
because one or more columns require another type of content. Unknown error."
Guided by other posts online I gathered that this might be because the actions checkin and set content approval occur to close together. I tried letting the workflow pause for the duration of 1 minute after checking in, but this pauses the workflow indefinitely.
I then tried 5 minutes (as this is the time standard set by SP2010 designer) but this also resulted in indefinite pausing.
Posts online lead me to believe that I'm not the only suffering from this problem, but as of yet, I haven't been able to find a solution that works for me. Hopefully someone can help me.

Hi,
According to your post, my understanding is that the "Set Content Approval Status" didn’t work in SharePoint 2010 Designer workflow.
I try to reproduce the issue and the result is the same as yours.
If I only check out and check in the item, the workflow works well.
However, once I set Content Approval Status after checking in the item, the workflow get error.
As a workaround, I recommend to use two workflow to achieve what you want.
First, create the first workflow, and allow the workflow to be manually started.
Then, create the second workflow, and
start the workflow automatically when an item is changed.
When you start the first workflow, the document will be set value of the release date. And then the second workflow will be started automatically to set the content approval status.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

SRM 5.0 Confirmation in Awaiting Approval Status

We have the confirmations in "Awaiting Approval" status.
I had checked the following steps but still the status remains as-is.
1. Transaction SWUD
2. Enter workflow WS10400010, press enter
3. Execute 'Test environment'
4. Check 'Including subworkflows'
5. Execute 'Consistency check for components'
There are no errors for BUS2203 (Confirmation business object).
I have cross checked the BUS2203 for WS10400010 Active Status is both T-Codes SWETYPV and SWE2.
We had a previous issue of BUS2203 with some errors and that went away after following steps in OSS Note and SDN comments. Note 962488 - "Workflow definition '&' not in version '&' (WD 401) and SDN.
WS10400010 is No Approval Workflow for confirmations that is active and classified as General Task.
Can you please advise on this status issue?

Please analyse the Workflow log from SWI2_FREQ. I think you can check this issue in SRM forum. I think this is discussed.
Thanks
Arghadip

Shopping Cart in "Awaiting Approval" Status

Hi All,
There is a SC which requires an approval from one approver. The SC has gone to Approvers inbox for approval. The approver has approved the SC. After this the SC is not getting approved and its hanging in Awaiting Approval Status.
We are using N-Step BADI
When I was checking on this I was seeing entries in SM58 as below.
Caller       Function Module                Target System                    Date       Time     Status Text
XXXXXXXXX SWF_RUN_REMOTE_SERVICE         WORKFLOW_LOCAL_100               03/04/2011 06:34:01 Name or password is incorrect (repeat logon)
XXXXXXXXXX SALRT_CONFIRM                  WSCAH003SAP01_SR1_62             03/04/2011 06:34:01 Name or password is incorrect (repeat logon)
your valuable suggestions are very helpful.
Regards,
Satya.

Hi,
Thats strange because the error 'Name or password is incorrect' usually occurs when RFC destination is not appropriate.
Some quick checks
1. Automatic workflow customisation (SWU3) done? All green?
2. Remote logon working?
Also check this troubleshooting link http://www.abovesoft.com/analyzertroubleshooting.html
Regards,
Nikhil

Bidding Engine - Bids waiting in "Awaiting approval" status

Hello SRM Gurus,
We have SRM 5.0 bidding engine implemented. We have been using bid invitation for about 6 months now. For the last couple weeks we are having an issue where the bid invitations is stuck in "Awaiting Approval" status. We are not using any approval process.
I would appreicate it if any one could help me with resolving this issues.
Thank you very much

Thank you for your response.
No, the problem is that we are not able to even able to publish the Bid Invitation. Our buyers are creating the Bid invitation and put it in hold for adding additional information at a later time. When they come back to publish it - it says bid invitation is already in approval process and does not allow them to publish it.
Hope this info helps, Let me know if you need additional information.

TS2756 iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???

iam using iphone 4S with win 7 PC and i cannot connect to the internet through my phone but i tried with my other 4S and it works but what should i do for the first iphone 4S???
as i said i have two iphone 4S,,,,,
1st one --- has os 5.1
2nd one has os 6.0
i tried 2nd one with carrier reliance gsm nd it works with that personal hotspot setting using USB...
but i want to connect the first 4S with carrier TATA DOCOMO GSM but its not working with the same USB feature????
plz reply asap...!!!
thnxxx in advance!!!

If not this:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
One user reported that placing the iPod in the freezer fixed the problem.
Also heating sometimes works. See:
Why can't I select my wifi settings?
A trick that works frequently with iPhones:
Settings > AirPlane Mode ON, Do Not Disturb ON
Power down and wait 5-10 minutes
Power up
Settings > AirPlane Mode OFF, Do Not Disturb OFF
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar
Then:
Does the iOS device connect to other networks? See other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why??

I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why?? Pls help.

Yup - nothing happens. I then took the same VGA cable and plugged it into my friend's iPad1 and it worked perfectly when she opened Keynote. My understanding is that the iPad2 mirrors the entire screen, so no need to go into any specific application in order to project to the screen, right? Do I need to download any specific app or change any settings in order to be able to project the screen using VGA?
Sorry - novice at this. Not very tech minded either...

I've been working with documents in pages and recently downloaded word for mac. i open the pages documents and they appear to be corrupt. at least, a lot of the font is now in weird boxed pictures. what do i do?

I've been working with documents in Pages and recently downloaded Word for Mac. Upon opening Pages documents with Pages, the documents appear corrupt. Much of the font has been replaced with boxed little pictures - yet they are identified as times new roman. What do I do?

You got the new iphone????? I have same problem. I transferred audiobooks to device to find no audiobooks on device (despite it being in iTunes as if it was). Have you found a solution????? I even tried to change import settings on format transfer but hasn't worked.

I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia. Yesterday I updated with IOS 5.0.1. Now it is showing that sim is not valid. The same sim works in other p

I bought the company unlocked phone from apple store Canada. It was originally loaded with software 4.2 and was working fine here in SaudiArabia. Yesterday I updated with IOS 5.0.1. Now it is showing that sim is not valid. The same sim works fine in other phones.

Here's and update on my problems and here are are some screen shots of the types of problems I've been having since the v5.0.1 update. Keep in mind these are native apps and I have tried the rebuild phone crap many times, nothing helps.
This is screen shot of a what happened when I tried to use my camera one day, both the front and back cameras were all black. I had to power cycle the phone to get rid of this problem. The cameras appeared to be working correctly, I could focus and zoom but it was all black.
Here is an image of what happened when I searched for something in a map. This is after I picked the choice I wanted, the keyboard disappeared but the list didn't. I had to force close the app and restart it for this problem to go away. Who knew five bars on ATT was possible.
And finally this is the messaging app, although you would not know it. I had to return to home screen (after a long pause for it to process the button push) and return to the messaging app. This happens all the time with the messaging app and the notifications sounds drive me crazy. If i'm using the phone, say browsing the web and I get an incoming message its almost 100% of the time the messaging app will screw up. The sound will play at the wrong time or not at all, message will show up in notifications and diasapear in message app or Ill have a problem like this:

How to fetch service order with partucular system status and user status

Hello All,
How to fetch service orders with specific system status and user status.
thanks

I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
I want to fetch released service orders with status INIT and RENT.
Here, SYSTEM Status = Released and
USER Status = INIT
RENT
So is there any function module available for the same.....

My iPhone 5 doesn't send any text messages or i messages and the problem isn't with the sim card as i tried it with another iPhone 5 and it worked fine.

my iPhone 5 doesn't send any text messages or i messages and the problem isn't with the sim card as i tried it with another iPhone 5 and it worked fine.

OK. Thanks for sharing.
Have a nice day.

SC with awaiting approval status and no work item for Approvers.

Similar Messages

Maybe you are looking for