SC workflow start when pressing button held

Hi,
When we create a SC and then press button hold the approval workflow is started in status waiting. The problem with that is that it already has decided the approvers from the values in the SC when hold was pressed. If we then changes something in the SC that has an impact on the approval it is not considered when we press button order. The workflow continues with the first found approvers.
I have tested to set BBP_WFL_SECURITY to 2 (restart workflow when changes), but this does not seem to have an impact before the SC has been ordered.
Is it possible to turn of the start of the workflow until the button order is pressed? We do not want the workflow to start on hold button and then just wait for the order button to be pressed before continuing..
All tips are appriciated!
Regards,
Kicki Wennerbo

Hi,
  Which  WF are you using for the SC approval?
BR,
Disha.

Similar Messages

  • PC does not start when pressing the power button, After that starts automatically like a ghost!

    I have HP Pavilion a6030in, My pc does not start when i press ther power button, but it starts after sometime automatically after that it works fine.
    Again when i shutdown and leave it for sometime, and still the problem is unsolved.
    Please Help
    This question was solved.
    View Solution.

    he figured out you dont just shut the lid and walk away, you use Windows shutdown
    click Kudos to say thanks if I helped

  • Workflow starting when event is trigered, but not in transaction

    Hello,
    I have defined a workflow for FI, based on FIPP and a derived ZSF1FIPP subclass.
    I have a strange situation with this WF. It listens for the event CREATE from FIPP.
    If I create an invoice with fbv1, de WF doesn't start, and in trace it sayes ended with exception.
    If I simulate the CREATE event for FIPP, and fill the structure, it works perfectly, also if I start it in test.
    I have checked the linkage tables like swu2, but it seems ok.
    If you have any idea, what is causing this behavior,  please reply.
    Thx and regards,
    Adi

    Hi Sue,
    Thx for following up.
    In the check function, I am setting properties like:
    I think they are ok, as the WF starts when trigered by SWUE.
    Regards,
    Adi
    Vollständigkeitskennzeichen muß ne space sein
    ansonsten wird überflüssiges Ereignis gelöscht.
      if flagcomplete eq space.
        raise unvollstaendig.
      endif.
    *..... ZUSATZFUNKTION: Element des Ereigniscontainers füllen" .......
    zunächt lesen des Attributs Vervollständiger
    swc_get_property object 'UserComplete' usercomplete.
    if sy-subrc ne 0.
      raise object_not_found.
    endif.
    "US" für USER voranstellen
    concatenate 'US' usercomplete into usercomplete.
    Manipulieren des Ereigniscontainers (Feld INITIATOR)
    swc_set_element event_container '_EVT_CREATOR' usercomplete.
    if sy-subrc ne 0.
      raise object_not_found.
    endif.

  • N73 ME slow / lag when pressing buttons & keys

    My N73 is just 3 days old but whenever I try to start composing messages, the keys lag for the first 5 or so characters, I have to wait for X seconds just to type in another character. It also happens when I edit contacts names or just about every time I try to do something that involves keying/pressing the buttons.
    It also happens when my phone is in stand by for a couple of minutes, then when I try to unlock the keys, I would have to try it 4 x until it gets unlocked successfully... It also happens when I access the menu. Sometimes I have to press the menu key 3-4 x just to get to the actual menu page.
    I did install the sms accelerator, although I didn't have problems sending SMS.
    But now what? How to get rid of the key lag?
    Anyone?
    FYI: I have the latest firmware.Message Edited by mymaria on 12-Mar-2007
    08:07 PM
    Message Edited by mymaria on 12-Mar-2007
    08:16 PM
    ♥ \m/ai ♥

    actually, i have my messages on the phone... i think the problem lies on the key response time because it can't cope up with fast keying, i think.
    yeah there is an sms accelerator for n73, i got it at the n73 support page.. although i don't know what it's really for anyway as I don't see any changes on the phone's performance.
    ♥ \m/ai ♥

  • Exception CX_WD_BAD_ARGS when pressing button

    Hi,
    I am currently working on a web dynpro application that has a tab strip on the main view a separate view for every tab.
    In order to be able to store the data, I added a SAVE button to the main view. Unfortunately, the exception CX_WD_BAD_ARGS is raised, when I press this button.
    When I put the button on one of the tab strips, it works fine.
    Could you tell me, why I get this exception, when I put the button on the main view?
    This is the part of the coding, where the exception occurs:
      367 *======================
      368 method Onactionsave_Mw.
      369 *======================
      370 " typecasting from generic to specific arguments
      371
      372 * data declaration
      373   data:
      374     wdEvent like Event.
      375   field-symbols:
      376     <lor_Param>   type Wdr_Event_Parameter.
      377
      378   wdEvent = Event.
      379
      380   data:
      381     VIIEW type ref to If_Wd_View.
      382   read table Event->Parameters[]
      383     with table key Name = `VIIEW` assigning <lor_Param>.
      384   if ( 0 ne sy-Subrc ).
    >>>>>     raise exception type Cx_Wd_Bad_Args
      386       exporting
      387          Parameter = `VIIEW`.
      388   endif.
      389   " Cx_Sy_Conversion or similar problems may occur
      390   " but this is caused by illegal usage !!!
      391   f_Internal_Api->assign_Untyped_Reference(
      392     exporting data_Ref = <lor_Param>-Value
      393     importing data =     VIIEW ).
      394
      395     Me->f_Appl_Class->Onactionsave_Mw(
      396     !viiew = !viiew
      397     !wdevent = !wdevent
      398   ).
      399
      400 endmethod.
    Best regards,
    Fabian

    Hi Fabian,
    I think that the problem is not, in which view you have called the action, but the parameter at the action handler. Just delete the parameter VIIEW, and it should work. You may declare only those parameters of an action handler, which are filled by the UI element, when the event is triggered (the list of action parameters is available in the documentation of the UI elements).
    Regards, Regina

  • How to delete rows from multiple tables when pressing button

    Hi, I'm wondering how do I delete a row from two different tables at the same time when I press the Delete button. Both tables have GROUP_ID as their primary key.

    Nevermind! I realized that I had "reset" before my process to delete from the 2nd table.

  • No sound when pressing buttons

    My iPod shuffle 4gen is acting weird.
    Whenever I press the sound button or slide the shuffle, play in order button, I can't hear any sound. I restored the iPod and so on and still nothing changed.
    Can someone help me with this? I have no clue about what's happening to my iPod shuffle.
    Thanks

    No it is not that.
    After charging it over 50% it started to work.
    I think there is a bug in software.Cause it happened to me 3 times already.
    Someone wrote to clean the docking conector.It could be what happened to mine after I change charging place.
    So far no problem untill next time.
    There was sounds in some applications but not all of them.And sound was working with headphones.

  • Website goes blank when press button

    Hi
    I'm more of a motion graphic designer than a web designer so
    don't know too much about the technical side of things when it
    comes to the web.
    I have recently built a website which can be viewed at
    www.birdmancreative.co.uk
    On some computers it works fine but the majority of times
    when you first view it and click a button the site goes black. Then
    if you hit refresh it will works fine. It's as if there is a bug in
    there but i don't know what I'm looking for.
    Any help would be much appreciated.
    Adam

    Something you are doing is not browser friendly. It worked
    fine for me in IE7, but did just what you said when I tried it in
    Firefox.
    Are you using any Javascript? It seems like the problem is
    not with the flash file itself, but with the way it is being called
    into the browser/html.

  • MBP won't start when power button is pushed

    Unit stays absolutely silent.  Any suggestions?

    S.U.
    Thank you for your response.  I'm quite sure that the problem was that the magnetic power adaptor hadn't connected well and wasn't charging.  Its LED showed green but the battery was drained.  I checked the battery by pushing its test button and a single LED slowly flashed indicating that the battery needed charging.  After resetting the adaptor connection and giving it time to charge, the MBP started without a problem.
    Moral of the story... don't over look the obvious.
    Thanks again.

  • Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up allright, but the programs don't start when I press any buttons. How do I fix this problem?

    Since I have changed from Windows 7 to Windows 8.1, I have not been able to start up Photoshop Elements 9! or Premiere Elements 9! The menu starts up alright, but the programs don't start when I press any buttons. How do I fix this problem?

    If Layers is greyed out it possibly means that you are in Quick Mode. Select 'Expert' and all the options should become available.
    Try permanently associating psd files with C:\Program Files (x86)\Adobe\Photoshop Elements 12\PhotoshopElementsEditor.exe and see if that fixes the issue. Instructions here - http://windows.microsoft.com/en-gb/windows-8/choose-programs-windows-uses-default.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

    Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
    Thankyou in advance  for your help.
    Terrence

    Hey terremo,
    Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

  • How can i initialize a button (Switch when pressed) to be always disabled when i start the programm.

    Hello
    How can i initialize a button (Switch when pressed) to be always disabled when i start the programm. My problem is that the state of the button is always the state in which it finihed last time.
    Thanks
    Lukas

    A button is either true or false. "Disabled" is a property that determines if the button can be operated or not.
    It seems from the rest of your question that you actually want to ensure that it is set to false, but remain enabled. This is easiest done with a local variable as already mentioned by becktho.
    If you want to disable the button, use a property node.
    LabVIEW Champion . Do more with less code and in less time .

  • "iPhone 5" sometimes doesn't wake up when pressing on the start or power buttons

    Hello Everyone,
    I'm facing a little problem with my new iPhone 5.
    When it goes into sleep, sometimes doesn't wake up after pressing on the start or power buttons, and I have to wait 5 to 15 seconds until it is ON again.
    Do you have any idea Why is that?
    Regards,
    William

    Hi William,
    There is a section in this article that troubleshoots when a button is slow to respond:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Specifically, this section:
    Buttons and Switches
    The Home button is slow to respond
    Cheers!
    - Ari

  • My ipod nano 6th generation does not start on pressing the sleep/pause button  or pressing both sound low and sleep pause button.it starts while connected to power it is fully charges

    i have an ipod nano 6th generation .version 1.2 yesterday i  restored it on i tunes  using my system window 7. for the last few days it does not start when the sleep/pause button is pressed.or even by pressing the both button sleep/pause and sound minus..It starts while connected to power. and then continues working. I can not put off it and it automatically goes off after some time its performance is ok  after starting by connecting to power and then disconnecting the cord.
    what would be the reason and what to do?>

    Call Apple Care as you are still under warranty.  

  • Acrobat 9 (CS4) Freezes when pressing 'Print' button

    Hi all,
    I am having a problem with Acrobat Pro 9.0.0 in that when I go to print (with any setting/printer etc) selected, the dialog freezes after pressing the 'Print' button. Therefore I must force-quit to start Acrobat again.
    I have tried trashing the preferences, removing Acrobat 9 altogether & re-installing and nothing seems to be helping.
    I have also tried all sorts of different PDF files both created by myself as well as random PDF's from elsewhere.
    What also seems to happen is that the blue 'Print' button pulses while waiting to be pressed and then when pressed goes blue and stops pulsing and that is where it stays frozen.
    Please let me know if you need any more information or details of the configuration I am using.
    ps. I have Acrobat Professional 8.1.3 also installed which works fine including printing.
    Regards,
    Ross

    Hi Mike,
    I do have some startup items;
    EyeTV Helper
    AdobeResourcesSynchroni
    I Love Stars
    GrowlHelperApp
    NikePlusUtil
    EEvent Manager
    EPSON Scanner Monitor
    I don't have any haxies on anything.
    I made a new user account and tried to replicate the problem but it seems to work fine when logged in as a different user which leads me to think it is a preference in my current user>library
    Ross

Maybe you are looking for