SCA-111000 (IIS 5.0 and 4.1 IOS)

Hello,
I am configuring the the above device, and would like to know how do I update the OS to 4.1 version and how to import the IIS 5.0 certificate and key into the Secure content accelerator config manager.
I also need the 4.1 IOS to upload it to my device.
Any suggestions and help is highly appreciated.

the software is available at :
http://www.cisco.com/cgi-bin/tablebuild.pl/sca
The procedure for the upgrade is at :
http://www.cisco.com/en/US/products/hw/contnetw/ps2083/products_qanda_item09186a00800945fb.shtml
For the certificate check :
http://www.cisco.com/en/US/products/hw/contnetw/ps2083/products_configuration_example09186a00800946a5.shtml
Gilles.

Similar Messages

Get Error on AM 7.0 do SSO on MS IIS 6.0 and Apache 2.0x

Hi...
I install AM 7.0/Sun Web 6.1 on Window (Java ES4). And I try to setup SSO between MS IIS 6.0 and Apache 2.0. I don't know how config in the AM by using amserver (web admin).
I already complete install Policy Agent for MS IIS and Apache 2.0 and both of web was protected.
I get the error msg on AM dubug log below :
IIS :
2006-06-26 22:56:18.376 Debug 3876:157ae90 AuthService: HTTP Status = 200 (OK)
2006-06-26 22:56:18.376 Debug 3876:157ae90 AuthService: Http::Response::readAndParse(): No content length in response.
2006-06-26 22:56:18.376 Error 3876:157ae90 AuthService: AuthService::processLoginStatus() Exception message=[Authentication Failed!!] errorCode='107' templateName=login_failed_template.jsp.
2006-06-26 22:56:18.376 Error 3876:157ae90 PolicyEngine: am_policy_evaluate: InternalException in AuthService::processLoginStatus() with error message:Exception message=[Authentication Failed!!] errorCode='107' templateName=login_failed_template.jsp and code:3
2006-06-26 22:56:18.376 Warning 3876:157ae90 PolicyAgent: am_web_is_access_allowed()(http://w2k3.sunth.com:81/index.html, GET) denying access: status = Access Manager authentication service failure
2006-06-26 22:56:18.376 Debug 3876:157ae90 PolicyAgent: am_web_is_access_allowed(): Successfully logged to remote server for GET action by user unknown user to resource http://w2k3.sunth.com:81/index.html.
2006-06-26 22:56:18.376 Info 3876:157ae90 PolicyAgent: am_web_is_access_allowed()(http://w2k3.sunth.com:81/index.html, GET) returning status: Access Manager authentication service failure.
2006-06-26 22:56:18.376 Debug 3876:157ae90 PolicyAgent: HttpExtensionProc(): status after am_web_is_access_allowed = Access Manager authentication service failure (3)
2006-06-26 22:56:18.376 Error 3876:157ae90 PolicyAgent: HttpExtensionProc(): status: Access Manager authentication service failure (3)
Thank you very much for your support
Wut

Hi ,
I was installed and configured policy agent successfully.while i am trying to access the application url i am getting following error.
I am using IIS6.0 and access manager 7.1.
Error 2824:15b9918 AuthService: AuthService::processLoginStatus() Exception message=[Application user ID is not valid.] errorCode='107' templateName=login_failed_template.jsp.
2009-03-10 00:03:05.828 Error 2824:15b9918 PolicyEngine: am_policy_evaluate: InternalException in AuthService::processLoginStatus() with error message:Exception message=[Application user ID is not valid.] errorCode='107' templateName=login_failed_template.jsp and code:3
2009-03-10 00:03:05.828 Warning 2824:15b9918 PolicyAgent: am_web_is_access_allowed()(http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html, GET) denying access: status = Access Manager authentication service failure
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: am_web_is_access_allowed(): Successfully logged to remote server for GET action by user unknown user to resource http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html.
2009-03-10 00:03:05.828 Info 2824:15b9918 PolicyAgent: am_web_is_access_allowed()(http://fcs-ylwkuzfoz1q.ramesh.com:99/website.html, GET) returning status: Access Manager authentication service failure.
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: HttpExtensionProc(): status after am_web_is_access_allowed = Access Manager authentication service failure (3)
2009-03-10 00:03:05.828 Error 2824:15b9918 PolicyAgent: HttpExtensionProc(): status: Access Manager authentication service failure (3)
2009-03-10 00:03:05.828 Debug 2824:15b9918 PolicyAgent: OnSendResponse(): HTTP Status code is 500
can any one please help me to resolve this.
Thanks
Ramesh Kumar GV

How to upload ESS.sca in to WAS server and how to configure it

How to upload ESS.sca in to WAS server and how to configure it.
If business package ESS.epa how to deploy and configure it.

Hi
Configuring The Business Package For Employee Self Service (ESS)-mySAP ERP 2004
contains a helpful guide on
CONFIGURING THE BUSINESS PACKAGE FOR EMPLOYEE SELF SERVICE (ESS)-MYSAP ERP 2004
Thanks & regards
Arun Singh

Iisforward.dll causing IIS crash (IIS4 and IIS5)

After having discovered SP6 breaks iis proxying on IIS5 (unsupported, I
know), I began making test preparations on an IIS4 box. I am
encountering the same problems.
I install the iisforward.dll ISAPI filter.
I create the extension mappings, .jsp and .wlforward
(if there are special IIS settings on the "home directory" page it would
be nice if this was noted)
I create the iisproxy.ini:
WebLogicHost=jubjub
WebLogicPort=7001
ConnectTimeoutSecs=20
ConnectRetrySecs=2
WlForwardPath=/weblogic (I have tried a PathTrim=/weblgic here as well)
Debug=on
DebugConfigInfo=on
I restart IIS Admin service and start the Web publishing service.
A request: http://webserver/weblogic/session causes an application
error on the webserver and the request to hang. Same thing I've
experienced on IIS5. If I use SP5, I see no errors.
Anyone else experiencing similar problems?
Jesse

Acknowleding that there is a bug that causes problems with IIS is on a
different box than WebLogic, I still have a problem getting proxing by path
to work when both are on the same machine. I followed the instructions for
installing the proxy, but have not been able to get it to work at all. Did
you find anything unclear in the instructions that you could provide clarity
to that would at least get me to the same "level of working" as you are?
Thanks,
Burke
"Diogo Lemos Pereira" <[email protected]> wrote in message
news:[email protected]...
YES, we are experiencing similar problems, on a similar configuration.
We do not suffer any problems when running IIS on the same box asweblogic,
i.e., setting "WebLogicHost=localhost" in the iisproxy.ini file.
Till the moment, we have found NO workaround for this problem - WLS seemsto
be ignoring the WebLogicHost and WebLogicPort parameters in iisproxy.ini,
other than localhost and 7001 (to which it defaults).
We have reported this situation to BEA Support, it has been assigned Ref#
200240.
Follow excerpts of our report, below:
Detailed Problem Description
======================
IIS breaks when forwarding requests to WebLogic Server
installed in a different box.
The problem seems to be wls ignoring WebLogicHost and
WebLogicPort parameters in iisproxy.ini other than localhost and 7001.
Error Message/Stack Trace
=====================
iisforward.log
Thu Oct 26 18:59:07 2000 LoadPropsFromFile:
D:\cemghb\IISProxy\iisproxy.ini
Thu Oct 26 18:59:07 2000 WLForwardPath: /weblogic
Thu Oct 26 18:59:07 2000 PathTrim: /weblogic
Thu Oct 26 18:59:17 2000 ====New
Request====/weblogic/FeedServlet
Thu Oct 26 18:59:17 2000 After PathTrim, url is
'/FeedServlet'
iisproxy.ini
WebLogicHost=10.100.21.91
WebLogicPort=7001
WlForwardPath=/weblogic
PathTrim=/weblogic
Debug=ON.
Good luck
Diogo
=====================
Diogo Lemos Pereira
Java Systems Architect
WhatEverNet Computing, S.A.
Portugal
=====================
Jesse E Tilly wrote:
After having discovered SP6 breaks iis proxying on IIS5 (unsupported, I
know), I began making test preparations on an IIS4 box. I am
encountering the same problems.
I install the iisforward.dll ISAPI filter.
I create the extension mappings, .jsp and .wlforward
(if there are special IIS settings on the "home directory" page it would
be nice if this was noted)
I create the iisproxy.ini:
WebLogicHost=jubjub
WebLogicPort=7001
ConnectTimeoutSecs=20
ConnectRetrySecs=2
WlForwardPath=/weblogic (I have tried a PathTrim=/weblgic here as well)
Debug=on
DebugConfigInfo=on
I restart IIS Admin service and start the Web publishing service.
A request: http://webserver/weblogic/session causes an application
error on the webserver and the request to hang. Same thing I've
experienced on IIS5. If I use SP5, I see no errors.
Anyone else experiencing similar problems?
Jesse

IIS 6 Metabase and IIS 6 configuration compatibility install

I am trying to install IIS 6 Metabase and IIS 6 configuration compatibility to my Windows 7 ultimate machine. the install fails, and the following log entry is created
Update IIS-Metabase of package IIS-WebServer-Package failed to be turned on. Status: 0x80070bc9.

Install the IIS 6.0 Management Compatibility Components in Windows Server 2008 R2 or in Windows Server by using the Server Manager tool
Click Start, click Administrative Tools, and then click Server Manager.
In the navigation pane, expand Roles, right-click Web Server (IIS), and then click Add Role Services.
In the Select Role Services pane, scroll down to IIS 6 Management Compatibility.
Click to select the IIS 6 Metabase Compatibility and IIS 6 Management Console check boxes.
In the Select Role Services pane, click Next, and then click Install at the Confirm Installations Selectionspane.
Click Close to exit the Add Role Services wizard.
Install the IIS 6.0 Management Compatibility Components in Windows 7 or in Windows Vista from Control Panel
Click Start, click Control Panel, click Programs and Features, and then click Turn Windows features on or off.
Open Internet Information Services.
Open Web Management Tools.
Open IIS 6.0 Management Compatibility.
Select the check boxes for IIS 6 Metabase and IIS 6 configuration compatibility and IIS 6 Management Console.
Click OK.
source: http://technet.microsoft.com/en-us/library/bb397374(EXCHG.80).aspx

IIS 6.0 and Tomcat 5.0 link ? ^_^

Hi, I am a Java programmer in South Korea.
I have installed Tomcat 5.0 in Server and it works.
My job is to link Windows 2003 Server IIS 6.0 and Tomcat 5.0.
But I don't how how.
Kindly inform me how to link IIS 6.0 and Tomcat 5.0.
I'll wait the reply...
PS : Sorry for my poor English! ^.^

http://wiki.apache.org/jakarta-tomcat/Tomcat_2fLinks

What is difference between Firefox OS and Android or iOS?

What is difference between Firefox OS and Android or iOS?

kingofhawks, Firefox os is open source, offers the ability of do not track and has many great customization options. It is currently however targeted at 3rd world countries and/ or underdeveloped countries so it isn't recommended to use this if you're use to using Android and iOS at this moment. If you have any further questions, please do not hesitate to ask.
Thanks

I have iPhone 4s, and using latest iOS. When I try to open any link from Twitter or Facebook, it goes to open some wrong webpage. My iphone seems to be infected or suffering from some spyware or malware. How can I remove this wrong link opening

I have iPhone 4s, and using latest iOS. When I try to open any link from Twitter or Facebook, it goes to open some wrong webpage. My iphone seems to be infected or suffering from some spyware or malware. How can I remove this wrong link opening ? Please help me to resolve...

I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/

TS3694 i factory unlock my iphone 3gs and was on ios 6.1.2 and updatednit to 6.1.3 with itunes and the phone got lock again at activation screen. i try downgrading to 4.1 with baseband 5.13.04 and want to upgrade back to 6.1.2. pls help me

i factory unlock my iphone 3gs and was on ios 6.1.2 and updatednit to 6.1.3 with itunes and the phone got lock again at activation screen. i try downgrading to 4.1 with baseband 5.13.04 and want to upgrade back to 6.1.2. pls help me

Sorry, downgrading the iOS is not supported by Apple, thus there is no official way to do so. Your phone was re-locked to the carrier it was originally locked to because you hacked it to unlock it. Apple's servers detected such & re-locked your phone. You need to contact the carrier your phone is locked to if you want to get it officially unlocked.

Syncing notes, highlights, and bookmarks between iOS devices

Hi,
I've decided to digitize my technical library by purchasing ebooks from now on. The problem is which ebook format to go with. My ideal requirements would be to be able to purchase books from various sources and be able to read them both on my Mac and on iOS devices. Additionally, I want to be able to sync the highlights, bookmarks, and notes among all of these devices.
Currently, the real winner that satisfy all of these conditions is Amazon mobi format. The only problem is that I can only purchase books from Amazon if you go with this platform.
On the other hand, Apple iBooks is a close second here - the lack of a solution for a Mac is a problem, but I am hoping that Apple is working on the iBooks application for the Mac. The syncking of notes, highlights, and bookmarks among various iOS devices is a nice feature, and it does not require a tethered connection to iTunes - instead, these items they can now sync wirelessly among devices on the same iTunes account.
My question is if the syncing of notes, highlights, and bookmarks works only with ePub books purchased from the Apple's iBooks store or if this feature works with unprotected ePub books purchased elsewhere and loaded on iOS devices via the iTunes syncing feature. For example, most of the technical books I am going to be digitizing are Cisco books published by Cisco Press. As of late, most of their ebooks are available in the unprotected ePub format, and I would be using the iBooks app to read these books. So, if I were to purchase ebooks from Cisco Press, would I be able to to make a note in a book on one iOS device (e.g. iPad), and later see this note in the same book on my iPhone?
Thanks!

This page http://support.apple.com/kb/HT4059 says (I havn't tried it though) :
iBooks will automatically remember where you left off each time you close a book or return to your Home screen. Tap the bookmark icon in the upper-right corner to bookmark a specific page. Wirelessly sync your Bookmarks, Highlights, and Notes with your other devices using your iTunes Store account by tapping Settings > iBooks > Sync Bookmarks > ON.

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best

Huge issue with battery and overheating in iOS 6.1.1 iPhone 4S and ipad new iOS 6.1 what I can do , I am very sorry for update from 5.1.1 it was the best
My wife have iPhone 4 and ipad new is not updated it working good and my devices after update working bad :-(, likely the devices of my wife stay with 5.1.1

good thing i havent updated mine yet..

I have 2 ipad 2s. On the newer one I can log in and update to IOS 5 with no problem. On the older one I get the message "Your Apple ID has been disabled." Why does it work on one ipad and not on the other?

I have 2 ipad 2s. On the newer one I could log in and update to IOS 5 withno problem. On the older one I get the message "Your Apple ID has been disabled." No other explanation. Why can I log in on one ipad and I'm disabled on the other?

Well, I spoke too soon. Yes, I'm using the same account on both iPads, but I just changed my password for the umpteenth time and now I get the disabled message on both iPads. Just yesterday I was able to upgrade one to IOS 5 but got the error message on the other. I'm getting more confused by the minute.

I have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

I have the same problem. After updating to 6.1.2 my iPad 3,2 will not find Verizon network. It just says "Searching..." for ever. Any thoughts?

Sync play count, last played, and rating with iOS 5

From other threads (https://discussions.apple.com/message/16563011#16563011 and https://discussions.apple.com/message/16505730#16505730 for example) it is clear that there are some problems with play count, last played, and rating information updating and syncing under iOS 5. I have at least a partial solution. I am posting it here instead of under one of the existing threads because 1) some discussions seem to be confusing the difference between updating the iOS 5 device data and syncing the updated data to the computer, and 2) some of the discussions are focused iPhone, and though the problem appears similar I only have an iPod touch to test the solution on.
First of all, this is not a new problem. Prior to iOS 5, I would plug my iPod Touch into the computer and not see any play count or last played data for songs I knew I had just listened to. I discovered that if I clicked (in my computer's iTunes display of the iPod) on one song that I had recently listened to, it would suddenly display play count and last played for all the songs played since the last update. I could then transfer this playlist data (more on this in a minute) to the corresponding songs on the computer. Under iOS 5, this no longer works, and in fact causes the new play count and last played data on the iPod to be lost. However, under iOS 5 there is a way to get this information to update, even though you don't see it when you first connect to the computer.
To make this work, you have your iPod set on Manually manage music and videos under the Summary tab of the iPod settings in iTunes. I have messed around with this for hours, including several restores and resets of my iPod touch, and have found no way to get this to work under various Sync Music options. I have been using the Manually manage mode for years because I use my iPod with numerous different iTunes Libraries on several different external hard drives.
Here's the trick: Manually manage must be in effect before you connect the iPod to the computer. After your iPod shows up in the iTunes interface on your computer, in the main view (where it shows the different tabs at the top and capacity at the bottom) there is a Sync button at the very bottom right. Click on this and wait for it to go through the Sync steps (don't worry, you're not losing anything), and, voila, when you go to the songs (on the iPod) you have listened to since the last time you connected to the computer, the play count and last played data will be there.
Unfortunately, it's not a simple matter to get this data synced to the computer, but it can be done. At first I thought that once I got the data to show up on the iPod I could go to the Music tab and Sync Music to get the playlist data to the computer, but this does not work. It will sync the play count and last played data that are on the computer to the iPod, overriding the newer data. The way I have been getting my playlist data from my iPod to my computer without ever changing the Manually manage setting is by using the Copy Tag Info Tracks To Tracks script from Doug's AppleScripts for iTunes <http://dougscripts.com/itunes/scripts/ss.php?sp=copytinforackstotracks>. This isn't hard to download or install or use and copies playlist information very quickly.
I have never had a problem with play count or last played on my 2nd generation nano, which still works beautifully. As far as I can tell, play count and last played have never worked well on the iPod touch; there are threads in discussions complaining about this from years ago. It would be nice if Apple would recognize that these are extremely important features to many users and make it a priority to make these basics work before (or while) adding a lot of other fancy features.

Just for posterity in case anyone else ever has a similar problem.
I found out I can work around my problem, but I have limitations. The only time it'll update the correct songs is after I restore it and then add the initial songs on to the Shuffle. The key is to not ever have a situation where I reshuffle the order of those songs. If I ever shuffle to better alphebatize or categorize things, the sync updating screws everything up. If say Song #3 on my Shuffle's playlist after the intitial transfer gets moved around to being anything other than the third song played, my Shuffle/iTunes will still think that song has been played although the Song #3 I actually listened to after the sync update will be different. Now I have to carefully compose and place what songs I want loaded on since I can't mess around with the playlist setup at all.
I know Apple support would likely blame my Shuffle for the problem (it's over 6 years old now). But it's funny how this only happened right after I installed 11.0. The update to 11.0.2 did nothing.

APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1

APPLE DOCKING STATION NO LONGER WORKS WITH TOUCH 3G and 4G after ios 4.2.1 update.
I have both of these touches. I updated both 3g and 4g to ios 4.2.1 and poof...no docking station support other than charging, no audio and no remote function. My av/cable works with the tv, and the headphone jack still outputs audio, just no auido through the Apple dock and hte remote is dead. I purchased the dock from the apple store last year and it was working with both ipod 3g and 4g grrrrr...
Is Apple now in the bug trade business?, trade one for another....
Anyone else have this problem?

My iPod Touch 3G running 4.2.1 works fine with the Apple docking station.
Perhaps you have a loose cable somewhere and/or a dead battery in your controller?

SCA-111000 (IIS 5.0 and 4.1 IOS)

Similar Messages

Maybe you are looking for