SCA Files not visible in checkin tab though present in inbox folder

Hi All,
I trying to move the Components from development to Quality and production systems.I have Created my SC added dependency files (SAP-JEE, SAP_BUILDT, SAP_JTECHS) and PCUI_GP SCA , BP_ERP4HRE SCA file. Last SCA file is the business package HR Executive and analytics.
I have created the Domain, updated the CMS, Created track with the SC,gave the details in Runtime system.Now in Transport studio in the checkin tab i gave the check-in configuration path correctly as "/usr/sap/JTrans/CMS/inbox" and now when i check in i can see all the files except the business package SCA File -BP_ERP4HRE.We crossed check whether all files are available in the inbox folder and we found all files there solid.
Can anybody help me out in this scenario, I have searched the forum but i was not able to find solid solution ... Has anybody worked in this Business package transport before and faced similar problems ?
I would certainly appreciate helpful answers, so do put in your valid points as soon as possible since the job is quite urgent.
Thanks and regards,
Vivek

Please recheck the version of your SCA file.
The UI filters and shows only compatible SCA versions.
Best regards,
Bhuwan

Similar Messages

My Custom repositories are not visible under content tab of ACC

Hi,
My Custom repositories are not visible under content tab of ACC ,eventhough i had appended my custom repository in /atg/registry/ContentRepositories.properties to the property
initialRepositories+=/myCustomRepository.PLEASE HELP ME.

Kindly make sure,
initialRepositories+=/com/training/club/tools/myCustomRepository
I assume you have config/com/training/club/tools/myCustomRepository.properties component. /com/training/club/tools/ is your path of component from config.
-RMisihra

PO Price - EPUEB not visible in valuation tab in PR creation

Hi,
I am facing a problem with the layout while creation of PR.
The field PO Price is not visible in valuation tab in ME51N.
Pl. help.
Uttkarsh

Hi,
In PR Price will appear under Valuation tab of Item details.
This Price populates from Materail Master. If it is Standard Price it will appear. If it is Moving average price and PR is created for the first time you ahve to enter.
Sicne the MAP is updated after the GR is done.
Regards
Give points if useful

DNG files not visible in Lightroom 2.5

I've installled Lightroom 2.5 in my old desktop (Pentium 4, 1 GB RAM, Windows XP Home SP 3). After I've imported my camera RAW (NEF) images into Lightroom as DNG, I can see the photo info but photos are not visible.How can I make them visible?

I wonder if you have been using sidecars, as I had assumed. Maybe you've got a metadata template? "XMP files" norrmally refers to sidecars, but could refer to templates too. So which is it? How exactly have you been assigning this file to images in Photoshop? I don't know the detail of Photo Mechanic, though I'm betting your friend has been applying a template. If you do this first, you can then use that Read metadata technique. Once you've done that once, in LR you can save the metadata as a preset, or sync it to other images. Sadly LR can't read metadata templates directly.

Document NOT visible. Doc tab and layers ARE visible. HELP!

Installed Photoshop CS5 months ago. Have completed dozens of projects with only the occasional crash.
Yesterday it crashed "Photoshop needs to close".
When I reopened the file, the document is not visible.
The document tab is correct and the layers are intact and visible.
Tried opening other psd's, same results.
Will not create a new document, New document panel does not appear.
Moved same psd to laptop, opens like a charm.
Vista, 32 bit.
The file that crashed was a larger file, but I've definitely worked on much larger files consistently.
Could not find other posts regarding same issue.
Do I need to reinstall Photoshop?
What went wrong?
Thanks bunches, appreciate it!

Your graphics card driver needs updating/ reinstalling and you may need to disable OpenGL in the preferences. Anyway, you'd get much better and quicker answers, if you posted your questions in the right forums, so keep that in mind next time and use the PS specific forum.
Mylenium

Why are shared files not visible when iPhone4S connected to iTunes?

What makes this problem mysterious is that I have exactly the same settings on the same or eqivalent Apps on iPad2 and iTunes4S but when my iPhone is connected to my iTunes (running on my PC under Win7) it shows no files on Apps like Pages, iBooks, Keynote, and Print-n-share. Each of these Apps has files and each shows files when I connect my iPad2. I cannot export or import filesto/from itunes and iphone because the list of files inside the Apps is not visible in itunes.
PS I CAN, btw, export and import files by using the amazing App and service "DropBox" which is the only route in and out of my iPhone (I am not ready to use iCloud).

This is not a reply but an addition. While searching for answers as to why "Shared" files in original Apps in my iPhone4S did not appear on itunes I came across a similar discussion on another Forum in which Jim described in some detail how to get the two devices (my iPhone 4S and my iPad2) to recognize similar embedded files in similar Apps. https://discussions.apple.com/message/16690584#16690584
I went through this promising procedure but it did not help. Since the two devices are independent (I think -- they are on the same accoubt but ar different devices) I should be able to make them work the same way with regard to what is seem in iTune.

Airport Extreme files not visible on USB drive.

Airport Extreme files on Toshiba USB powered drive not visible through Windows. I disabled antivirus with no change. If I copy files onto it they go but then disappear. If I copy again it asks if I wish to overwrite the file as its already on the drive I just can't see them there. I tried another computer, also Windows 7, on our network with the same results. It is formatted as Fat32 and is recognized by the Airport. It is a 1TB size drive.

double post.

SQL Developer export files not visible

Hi All,
I've started using SQL Developer recently and I am completely new to this tool.
I've noticed a weird problem. All the export files and the folders I create from SQL Developer is not visible from the normal windows. Say I've executed a query and I need to export the output to a file. I right-click on the data grid; select Export Data -> xls/csv (anything) . I get a pop to mention the Location of the file. I click on Browse ; then select the location and then click on apply. I expect the file to be created. But when I go to that folder; I do not find any files.
To add on to my suprise; If i click on open a file and navigate to the above mentioned path; the pop-up shows that the file is present in that folder. But it is not visible from Windows. This is of no use as I cannot use those files.
BTW; version is 2.1.1.64
Note: I've also enabled the option of viewing all hidden files and folders in Windows.
Regards,
Arun

Hi Arun,
If you are using Windows Vista, Windows 7, or higher, and writing to a directory (like C:\, C:\Windows\, C:\Program Files\) that Microsoft wishes to protect from malware or just simple clutter , then you are running afoul of a redirect feature in the OS that puts the unwanted file in a VirtualStore folder for your user name, specifically:
C:\Users\<yourusername>\AppData\Local\VirtualStore\<full path where you think the file got stored>See the following for details:
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folder-redirect-in-windows-7/95218744-37e6-40cd-b890-2e647351df16
I just ran across this myself for the case of C:\ and perhaps this applies to your situation also.
Regards,
Gary

Close tab buttons are not visible on every tab, how should I fix this?

Hi there;
After updating to FF5 I have found that I no longer have a close button on all my open tabs. A close button becomes visible once I select a tab, but unselected tabs cannot be closed unless they are first selected. The end result is if I want to close a tab I first have to select it.
Simple version: I want to have a close button visible on ALL tabs at ALL times.
I have tried using the browser.tabs.closeButtons option, but no value 0,1,2, or 3 seems to be getting the job done (default was 1 when I first opened the file)
Any and all help would be appreciated!

If you have a lot of tabs opened then you only get a close button on the active tab (same as browser.tabs.closeButtons = 0)
See:
*http://kb.mozillazine.org/browser.tabs.tabClipWidth

TS1493 files not visible on ipod nano after disconnect from itunes

I have an iPod Nano (6th generation - 16 Gb) which was purchased in early 2011. All of a sudden all files in all categories (music, audiobooks, podcasts, etc) are no longer visible once it is disconnected from iTunes on my laptop. When reconnected to the laptop the files are visible again in iTunes - so they are still on the device. I have searched the Apple online support info and that only seems to provide complicated and unhelpful information about redesigating hard drive network maps etc., which is an action I am not prepared to risk for fear of making a bad problem worse, or contacting my "administrator" - which is me! Can anyone offer any solutions that don't require a PhD in computer science?

Here are a couple of additional pieces of information that might provide a clue:
1) At home, my iPod shows up as having the name I used when I registered it. On the second computer, my iPod shows up with the name DATA1.
2) I have an iPod 4GB mini. At home, that's pretty much the amount of space that shows up in the disk space bar (near the bottom) of iTunes. However, on the second PC, the disk space bar shows 10.35 GB used, 15.66 GB free! Which is just freaky, since it's still a 4GB iPod mini.
3) According to the iTunes display, everything is transferring absolutely smoothly. Since the iPod is configured to transfer music manually, the Do Not Disconnect sign is flashing throughout, but when I'm done and click on the eject iPod button in the lower right hand corner, it turns off, just the way it's supposed to and I can disconnect my iPod. It's just that my songs aren't visible anywhere on my iPod when I try then to play them.

PDK 6.0 Software Component and SCA File Not Found

We are caught in a scenario where we don't find the PDK 6.0 Software Component in the SLD and we are not sure how to get this in the SLD. In the current SLD(SP16) it shows PDK 5.0 Software Component. Also kidnly let us know how to get the SCA file in order to be able to Check-In in the CMS against the PDK 6.0 Software Component.

pjmorce wrote:
I have a little web service that works fine when i deploy it on a tomcat 6.0 server using eclipse.
It is used to transform a XML file (that contains a reference to a file img/logo.gif) into a PDF file. The PDF file is generated with that logo.
The img/logo.gif file is into a JAR file used the WS.
Remove the img/logo.gif from your JAR and deploy the web service again on tomcat 6.0 with eclipse.
You will probably see that the service works fine because it never loaded your GIF from the JAR. It is more likely the reference out of the XML is interpreted as path on the file system.

Flash file not visible in web page

Hello,
I'm Udayakumar from chennai (India). I created some flash
files and uploaded in web site. That are working properly in India
only. But not visible in other countries. What's the problem? I'm
exporting in swf format with following settings.
Version - Flash player 8, Loard orfer - bottom up,
Actionscript version - actionscript 2.0, options - compress movie,
local play back security - local files only.
And I'm inserting the swf files in html pages using plugin
commands. (ie)
<embed width="100" height="100" src="images/x.swf"
menu="false">
So I can't able to understand, why was the flash files are
not visible in other countries?
Pls explain me......
My email id - [email protected], [email protected]
Thanks & Regards
P. Udayakumar

You will need the following in your HTML (with modifications
to target your document) ...



<object
classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="
http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0"
width="pudaya enter your document width here" height="pudaya enter
your document height here" id="pudaya enter swf file name here
(without ".swf" extension)" align="middle">
<param name="allowScriptAccess" value="sameDomain" />
<param name="movie" value="pudaya enter swf file name here
WITH ".swf" extension" /><param name="quality" value="high"
/><param name="scale" value="noborder" /><param
name="bgcolor" value="#pudaya enter background color as hexidecimal
here" /><embed src="pudaya enter swf file name here WITH
".swf" extension" quality="high" scale="noborder" bgcolor="#pudaya
enter background color as hexidecimal here" width="pudaya enter
your document width here" height="pudaya enter your document height
here" name="pudaya enter swf file name here (without ".swf"
extension)" align="middle" allowScriptAccess="sameDomain"
type="application/x-shockwave-flash" pluginspage="
http://www.macromedia.com/go/getflashplayer"
/>
</object>
All of the above will be generated with all values in place
using the "Publish Settings" function in Flash if you check HTML as
one of the export settings.

Some .htm file not displaying in Topic List, but displaying in RH11 folder

Hi All,
We are running a project using RH 11, team consist of 3 person (include me)
But we have problem with many .htm file from my 1st coworker, file not displaying in Topic List in my Robohelp and 2nd coworker.
Although we already get the latest file again and again
But .htm file displaying in all our RH11 folder.
In my 1st coworker RH, all file displaying in Topic List also RH11 folder, but when file generated then
Many files from 1st coworker, hyperlink is not working well (broken link / file not found)
Does anyone have experience about this problem
Thanks

First of all, make sure you do not have the following files in source control: .cpd, .pss, .ldb.
These files contain local information that can cause problems when in source control.
Then try this:
Everyone deletes the .cpd file.
Everyone gets the latest files for the whole project from source control.
Open the project.
Does everything now display correctly?
If yes, you need to make sure you delete the cpd file before opening the project each day, and also during the day if you know a co-worker has made changes that you need. This file is a database which includes a list of all the files Robohelp knows about. When other people are adding and removing files, this information no longer matches properly. I recommend doing a Get Latest in these situations as well, just to make sure Robohelp can find the correct information.
If you are still not seeing the correct files repeat the above process, but at step 2, pick the options to Overwrite local files. I can't say where you will see these options - they may be two checkboxes in a dialog box when you select Get Latest - it will depend on your source control application.
Hope this helps.

Why is a .txt file not visible on iPod Classic in its entirety once the iPod is disconnected from the desktop?

I have enabled my iPod Classic for disc use; and previously successfully transferred .txt files. The latest .txt file is fully visible on the iPod while the iPod is connected to the desktop, but once the iPod is disconnected only about 20% is visible. It is as though the wheel will rotate no further to reveal the rest. There is masses of free space on the iPod.

Only the first 4000 characters of a longer note will appear from the device itself.
(122949)

File not visible

Hello..
I have scenario like file-file...
I'm unable to see the file in the target directory...even though receiver adapter process the message.
There is no error in SXMB_MONI it gives the successfull flag...
please let me know what might be the wrong...
Thanks..

Check the below and see if anything is missing/wrong
( may not be the exact order as below, but you need to reach the last one 'your adapter')
runtime workbench->component monitoring -> Integration Server -> adapter engine ->adapter monitoring (in status tab)-> File -> your adapter.
Do the same for your 'sender adpater' also
This may help to identify if anything is wrong in your settings
Hope this helps to fix your issue
Regards
Vishnu

SCA Files not visible in checkin tab though present in inbox folder

Similar Messages

Maybe you are looking for