Scala Rider FM music streaming

I've just replaced my N95 with a 16GB 3GS and I don't seem to be able to stream music from the iphone to my Scala Rider FM headset like I used to, is there a setting somewhere that I have missed???

In terms of functionality you did go backwards but it is actually because your headset is outdated. Even the newer phones from other manufacturers, which use Bluetooth 2.0+EDR (your headset is 1.2) and A2DP would have trouble with your headset. You might want to check the forum for your headset to see if there is any workaround.

Similar Messages

Carlo Scala rider Q2: problems with iPhone 3G under IPhone OS 3.O ?

Hi,
My Carlo scala rider Q2 Headset was working fine with my iPhone 3G, until this latter was upgraded to iPhone 3.0 OS.
Since that day, the microphone of my headset is no more active and I've check it was the same with a brand-new Carlo Scala Rider headset. Is it a problem of compatibility with the new bluetooth stereo version of iPhone 3.0 software .
Thank you for any help.
Vincent, Paris, France

Hi,
As all of you, i'm disappointed with the the iphone / scala combination, but let me make this clear - iphone is the "guilty" part not scala:
The Good: phone is pairing and working "ok", no voice dialing is possible
The Bad: no music or gps instructions can be heard in the headphones
However, everything was working fine with pre 3.0 versions of the iphone software
Yesterday, while on the phone with somebody, I've selected the ipod icon then hit play and ... what do you know, i was able to hear the song loud and clear in my headset, together with the guy i was talking to (he didn't hear the music, only me). Unfortunately the music stopped as soon as the call stopped. I was able to recreate the situation several times.
So what this proves is that, even with the 3.x version installed (A2DP), regardless of iphone generation (3G or 3gs), the headset can receive the bt music stream from the phone, but the phone is not sending it to the headset (only while a call is on)
Can somebody do something about this, it looks as a simple programming glitch or something?

Z10 problem with Scala rider q3 bluetooth headset

Hi there, I've got a Z10 and I’m trying to steam music to a Scala rider Q3 (Bluetooth motorcycle headset) but I'm having problems with it. When trying to listen to music it sounds as if the music is stuttering and sounds slowed down almost like its buffering a song.
The problem is only there between the z10 (I’ve tried 2 different z10s) and the q3. I've tried the phone with other Bluetooth devices and it works fine also the headset works with other phones.
Any ideas??
Solved!
Go to Solution.

I emailed Cardo tech support this morning and Geoff replied within about 5 minutes (very impressive). He also sent me a link so I can update to software version 1.2 (beta). I will try it this evening. Thanks for letting me know it worked for you.
Zwartie

Connectivity to Cardo Scala Rider

Hi, there.
I´m having difficulty in getting my iphone to connect to my cardo scala rider (it is one of these hands-free, bluetooth connectivity devices for motorcycle riders).
Any idea how I can get it done?
TKS

Scala Rider not activating Siri on iPhone 4, 4S, or 5? There IS a solution!
I have a Scala Rider Q2 pro and had iPhone 3GS and all worked perfectly. If I want to make a call, just make a loud noise or tap the control button the Q2, and 'Voice Control' comes on.
BUT.. when i got a 4S, the only way I could get Siri (or Voice Control if I turn Siri off) to come on was to actually push and hold the Home button the phone, which is just not feasible or safe when riding a motorcycle.
I searched high and low on the internet and found others with same problem, but no solution. I emailed Cardo (Scala) support, and got nothing. Then, a couple months later I decided to email them again. A few days later I got a reply with instructions AND IT WORKS PERFECTLY!!!!
Once again, I can be driving along on the bike and say "Boo!" (or whatever loudly) to activate the control on the Q2 (or tap the Control button) and then beautiful sound of Siri (din-din) comes on and I can talk to her and ask where to go for pizza, or phone my friend, or play Frank Zappa music, or whatever.
So, here is the ELUSIVE solution the "My Scala Rider will not activate Siri or Voice Control on iPhone:
Thank you for contacting Cardo Systems Support Center regarding our products.
To resolve your connection issue you must reset the devices and create all new pairings.
Please do a soft reset of the phone by deleting the headset from the phone and turning the phone off for at least 15 seconds and taking out the battery, if possible.
Then you must reset the Q2 PRO unit.
1. Perform FULL PAIRING RESET (not Intercom Pairing reset) to all Q2 PRO's.
2. With the Q2 PRO powered on press and hold the control button until the unit begins to flash red and blue. (Note it will look like it is turning off; keep holding the Control Button in until it comes back on, Red and Blue alternating.)
3. With the LED flashing red and blue, press and hold ONLY the volume up button for 5 seconds until the unit flashes blue (light purple) 4 to 5 times and then flashes red 3 times and turns off.
4. You have now reset your Q2 PRO.
Next you must re-pair any Bluetooth connections previously connected, starting with Q2 PRO to Q2 PRO intercom pairings.
When attempting to pair your Q2 PRO with and additional Q2 PRO you must follow these steps:
1. Make sure that both Q2 PRO's are powered on.
2. Press and hold the control button and MC button simultaneously until the headset begins flashing red rapidly. Repeat this process on the 2nd Q2 PRO.
3. Both headsets will flash red until they are connected. After they establish a connection each headset will begin flashing blue at approximately the same time.
It is possible to connect up to two headsets to your Q2 PRO. To add a 2nd Q2 PRO to your headset repeat the intercom pairing process from the beginning.
When attempting to pair the Q2 PRO headset with a Bluetooth enabled phone the phone must support the ability to pair to Bluetooth headsets. It is necessary to place the headset into pairing mode before trying to discover it with the phone. To do this you must:
1. Make sure the Q2 PRO is powered on.
2. Press and hold the Mobile button until the headset flashes Red and Blue. . (Note it will look like it is turning off; keep holding the Control Button in until it comes back on, Red and Blue alternating.)
3. Now search for a Bluetooth enabled headset from the Phone system you are pairing the Q2 PRO with.
4. After your device finds the Q2 PRO you will be prompted to enter a passkey. The passkey for the Q2 PRO is (0000).
Please feel free to contact us if we can assist you with any other questions.
www.cardosystems.com

IPhone, Garmin 2820, and Scala Rider

FWIW I tested this setup for motorcycles. The iPhone paired fine with the Garmin 2820 GPS and seemed to transfer the contacts too. I then paired the 2820 to the Scala Rider bluetooth device that fits on a motorcycle helmet. I was able to initiate a call using the 2820 and it all seemed to work fine.

Really? From their website:
Is this product compatible with the A2DP profile?
No, but there are other products in the scala rider that support A2DP.
Took me a minute to get that info. If you want to listen to music from your iPhone over bluetooth, you need a headset that supports A2DP.

Scala rider

I have a Scala Rider solo,it connects to my iphone 4 fine but I can't play my music MP3's it just comes out the phone but the Bluetooth is still connected and I can call out and receive calls.Any help would be appreciated.

Really? From their website:
Is this product compatible with the A2DP profile?
No, but there are other products in the scala rider that support A2DP.
Took me a minute to get that info. If you want to listen to music from your iPhone over bluetooth, you need a headset that supports A2DP.

Bluetooth and Scala Rider

I use a Scala Rider by Cardo when I am on my motorcycle. I never had problems pairing it with my old phone (razr) but cannot for the life of me get it to pair with my Curve. It sees my computer but that won't help me make calls when I'm on the road. Any help out there? Thanks in advance!

neverme wrote:
How many days do I have to wait until somebody answers to my question? =p
Am I the only one with this problem? Will it be fix?
Thanks,
If no one has an answer, you may not receive one at all! This is a "Community Forum" - answers mostly come from other members like yourself.
A search of the Forum found this post. Message #9 has a user reporting no problems at all.
I use a Camos BlueTooth system with my helmet, and it works perfectly - plays music, pauses and answers the call, then resumes music play.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?

My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?

http://discussions.apple.com/thread/3418045?tstart=60

I got an error message for a music streaming website. It said to check proxy settings. Where do I find them on website?

I got an error message recently when I opened my music streaming website (Whisperings PureStream). I've had this service for several years with no problem. The error message said to check proxy settings. Where do I find these settings, to modify or change as necessary?

Try to update the Flash plugin to the latest version.
*https://support.mozilla.com/kb/Managing+the+Flash+plugin
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/
See also:
*http://www.solopianoradio.com/listen.htm

How to setup my airport for music streaming

Hi all
I would like to use my iPhone and or iPad to stream music from Pandora and Spotify to my 5.1 (Wired) Speakers.
This question is similiar to this thread https://discussions.apple.com/thread/4153687 however i wanted some clarity and thought best to start a new discussion before pulling my hair out doing this the wrong way.
I have an unused Airport Express basestation (A1408) My current home setup is as follows:
Modem Router: (Netgear DGND3700) N600 Wireless ADSL2+ Dual band Gigabit
Home Theatre Computer: Windows 7 (Cat6 LAN Ethernet connection) NO LAN port
AV Reciever: (Onkyo TX-SR309)
5.1 Speakers: Wired connection to AV Receiver (NOT Airplay capable)
Laptop: Windows 7 (Cat6 LAN Ethernet connection)
My question is how to setup the airport, i understand it can be used to enable airplay streaming of music over the existing WiFi network, as these music streaming apps download and play music concurrently i would not want to have to switch between to two seperate WiFi networks. Should i plug the airport into the HTPC? I would need to purchase a LAN Splitter as the only LAN socket is already taken up with my cat6 connection. OR would i plug it directly into the modem/router? This second option is prefereable.
I have attached an image of my setup below. Any advice would be great, Regards Steve
[URL=http://s1293.photobucket.com/user/steve7677/media/homesetup_zps63eaf61c.jpg.html][IMG]http://i1293.photobucket.com/albums/b599/steve7677/homesetup_zps63eaf61c.jpg[/IMG][/URL]

Still slightly confused, with the link you provided i chose scenario 2. All the other secanrios instructed i connect the airport express to my home stereo or powered speakers. As i dont have an aiport express only an airport extreme there is no audio jack and cannot connect it to the stereo/speakers.
option 2: Connecting to an existing Wi-Fi network as part of a roaming network
Ensure that the AirPort base station Ethernet cables are connected as above
I have done this and conected it via ethernet cat6 to the modem/router
Launch AirPort Utility 6.1. The Assistant will automatically configure the Roaming network
Im using windows 7 and cannot find this version of aiport utility, only 5.6.1 - The message comes up: Aiport utility was unable to find any airport wireless device. I am running this utility on my win7 HTPC (which is connected to my modem/router via cat6 LAN) The airport light is blinkng amber.
would you reccommend a hard reset of the airport? or can you provide a link for AirPort Utility 6.1.?
Regards

Does iTunes use wireless music stream if using an Ethernet cable for AE?

Hello,
I have been having trouble with airtunes for some time now. I've tried lots of different things without much success. I think there might be too many wireless networks in my building and I am getting a lot of interference. So i'm thinking of trying a wired method.
If I plugged an ethernet cable from the computer into the Airport Express (which is then plugged into the stereo), does airtunes still send the music stream wirelessly or would it use the ethernet cable instead?
Thanks
WP

1. Will this work (i.e., add wireless to the office and maintain my existing wireless in my home)? If so, what do I need to do? Specifically, do I need to configure WDS and (if so) does 2Wire support this?
What you are attempting to do is actually called a "roaming" network in Apple terms and not WDS. In a roaming network, AirPort base stations are connected together on the same subnet of an Ethernet network. Each base station is setup as a bridge, but share the same network name (SSID) and encryption (if used). It sounds like it should be possible to setup the AirPort Express Base Station (AX) as a roaming network. The following is how it would be done with AirPort Extreme Base Stations:
- Network configuration: DSL/Cable Modem or Internet Router > (Ethernet cable) > [WAN] AEBS1 [LAN] > (Ethernet cable) > [LAN] AEBS2 [LAN] > (Ethernet cable) > [LAN] AEBSn (Note: In your case, you will have a single AX, instead of multiple AEBSs.)
- Setup the second AEBS, as a bridge. (Disable "Distribute IP addresses")
- For each AEBS in the roaming network:
-- Connect to the same subnet of the Ethernet network
-- Provide a unique Base Station Name
-- The Network Name should be identical
-- If using security, use the same encryption type (WEP, WPA, etc.) and password.
-- Make sure that the channel is set at least three channels apart from the next AEBS.
2. Assuming I can, can I have that same AX (i.e., the one connected vis-à-vis Ethernet cable) be used for wireless printing in the office while providing wireless internet? Any special configuration to allow that?
Yes.
3. If this network desire does not work, is there another set of hardware that I should purchase (i.e., a different wireless DSL modem, Airport Extreme, other???).
The configuration as you planned it should work...but, in case it doesn't, I'd recommend that you replace your current wireless router with an AEBS. You can then get either another AEBS or an AX to create the roaming network.

Music Streaming Dropouts

I have started getting extended dropouts during music streaming from iMac to Apple TV. It starts off as a glitchy sound until it finally goes quiet. It will then start back up about 20 seconds where if left off. Appears to be happening in about one minute intervals. I have rebooted wireless router, Apple TV and iMac.

as sir winston suggested, have you checked for _*wireless interference*_ ?
download iStumbler (may not work on 10.6) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel(s) of your network as far away as possible from those.
FWIW, i have hardwired most of my equipment to my TC. where physical ethernet cables are no option (due to location), i use *powerline adapters* _*such as these*_.
JGG

A2DP Bluetooth Music Streaming

I've been able to stream music from my iPhone through my car stereo via a Parrot MK6000 hands free Bluetooth device and an iCombi A2DP Bluetooth adapter (Buy at Oakley.com). The iCombi is an adapter for iPods that have the same dock connections as the iPhone so the device works perfectly.
The Parrot device handles the communication between the stereo and the phone, muting the music and allowing the call to be received, while the iCombi adapter provided the music streaming, again that is interrupted when a call comes in.
The biggest draw back is the that you can't charge the iPhone while you have the iCombi adapter attached.
The iCombi adapter also allows you to use Bluetooth headphones to listen to music.
This is a not a perfect configuration, I have experienced some glitches such as the music continuing to play while I receive a call, it still works well enough until Apple provides and update that embraces A2DP Bluetooth.
Regards,
Bob Petersen

A nice suggestion that I may go with but I'm still interested in finding a wireless solution. I'd like to get in my car with music already playing on the phone and have the car stereo pick it up and play through the speakers, then receive a phone call hearing the caller through the car speakers and use a mic in car that would work for my part of the call. All wirelessly. Thats how it works in my wife's car but she has bluetooth so I'm trying to duplicate the capability.

I am trying to stream music from my iMac using iTunes music files to my Cocktail Audio X10 music streamer. I have allowed my files to be shared the X10 sees the files but when I try to accsess them it gives me the message files not mounted. Please help?

I am trying to stream music from my iMac using iTunes music files to my Cocktail Audio X10 music streamer. I have allowed my files to be shared the X10 sees the files but when I try to accsess them it gives me the message files not mounted. Please help?

No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.

How can i get rid of music or videos that i purchased from iTunes but dont want anymore. When i delete them they always come back in my downloads available?

How can i get rid of music or videos that i purchased from iTunes but dont want anymore. When i delete them they always come back in my downloads available?

thanks. somehow after restoring it, ipod on my phone had another option to download them onto my phone (even though they would play so no idea) but then it allowed me to swipe the songs to delete them so they are finally gone from my phone!!!

Scala Rider FM music streaming

Similar Messages

Maybe you are looking for