Scale Attribute Times and Paste Attributes not working as did before

Using Copy and then Paste Attributes as I have done many times before upgrading the FCP 5, the option to "Scale Attribute Times" is grayed out and the keyframes are not placed correctly. This happens even if the cips are the exact same duration. I read a post from November that states that this feature is not working is FCP 5. If that is so, has anybody found a work-around or know of a fix?
Dual 1.25 G4 Mac OS X (10.3.9) FCP 5.0.1

The problem is that the content is replaced correctly but the keyframes move (they were originally at the beginning and end and now they are not). The "Scale Attribute times" box is grayed out.
I just tested this out and, from what I can tell, FCP (5) now needs Timecode to match in order for Paste Attributes > Content (with keyframes intact) to work as we'd like.
I placed a 10 sec image - with (the default settings of) In at 1:00:00;00 and Out at 1:00:09;29 - in the Timeline. I set keyframes for Scale & Rotation at the In and Out points (100% & 0 degrees -> 200% & 360 degrees)
When using the Paste Attributes > Content method with a second image having identical timecode In & Out, it works fine.
However, if the second clip's timecode is not the same - say In is set at 1:00:02;00 and Out set at 1:00:11;29 - then the content will be pasted but the keyframes will not adjust for the new timecode. They remain at the first clip's points (that is,1:00:00;00 and 1:00:09;29).
So, you can try to match timecode (which isn't always convenient) or you can...
Select the first clip & copy
Overwrite/replace the (first) clip with the second clip
Paste Attributes > Basic Motion (or whatever attributes you're pasting, except Content)
Or was that a workflow you were hoping to avoid?

Similar Messages

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regatta from Hamburg Germany

Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
 Cheers, Tom

Cut and Paste will not work

I have a Toshiba Satellite/Satellite Pro C50-A series laptop I bought new in December 2013. It has Windows 8 on it. I did the upgrade to windows 8.1 almost immediatley so I cannot remember if my control c / control v, cut and paste worked in 8 or not. But it will NOT work in 8.1 for most of my programs. I desperately need it to work on my All My Movies database software from Bolide software and my Green Eclipse sticky notes. And cut and paste will NOT work AT ALL for those programs. It works sometimes for my email and my Apache Open Office word processor.
I have contaced microsoft who's tech did something Tuesday morning to get it working. But then I booted down my computer and went to bed and when I booted it up, yep, no more cut and paste ability again! So I tried contacting microsoft this morning around 2:30am and they said it was an OEM problem and to contact Toshiba.
I have even run a sfc /scannow twice and get the same error message:
sfc /scannow      ran 1/22 1:30am
results: windows resource protection found corrupt files but was unable to fix some of them. details are included in the CBS.Log windir\Logs\CBS\CBS.log
for ex c:\windows\Logs\CBS/CBS.log
note that logging is currently not supported in offline servicing scenarios
The above error message I WAS ABLE to cut and paste FROM my green eclipse sticky note to this forum! But when I tried to cut and paste this message back to a NEW sticky note......NOTHING!
I hope someone here can provide a permanent solution to fix this! It may seem minor but I do a LOT of cut/pasting!
frustrated!!!!
lisa

There are dozens of possibilities, Lisa.
Which C50-A do you have? There is a label on the bottom.
What security applications do you have installed? Webroot is a common offender.
Do you have Microsoft Office installed? If so, which version?
Do you use Bluetooth?
Did you upgrade to Windows 8.1 properly, following carefully the instructions here?
   How to Update from Windows 8 to Windows 8.1
Find a situation that always gives you trouble, so that know when we learn something.
Then see if that trouble occurs after a clean boot.
   1. Open the System Configuration utility (msconfig.exe). You can do that by typing msconfig at the Start screen and pressing Enter.
   2. On the Services tab, set the Hide all Microsoft services check box and then click Disable all.
   3. On the Startup tab, click Open Task Manager, right-click and disable each Startup item. Then close Task Manager.
   4. Back on the System Configuration screen, click OK, and restart the computer.
-Jerry

I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time and it does not work in iChat. Why Not ?

Question:-
I created an Apple ID using my ISP Email when I registered at the Store/Apple Support Communities/iTunes/Face Time or other portal and it does not work in iChat. Why Not ?
Answer:-
For a Name to work in iChat it has to be an Valid AIM screen Name.
Only Apple IDs from the @mac.com ending names registered here and the Mobileme (@Me.com ending) names are Valid with the AIM service as well as being Apple IDs
(I am still working on info about registering with iCloud at the moment but if this does give you an @Me.com email it may well be a valid AIM name as well)
NOTES:-
The @mac.com page works by linking an external (Non Apple) email with a @mac.com name.
This External Email cannot be one linked to an Existing Apple ID (you have to use a second email or register at AIM )
The options at AIM are to use your existing email or create new name and link the existing only for Password recovery
MobileMe (@me.com ending names) were valid Emails addresses, Apple IDs AND a Valid AIM Screen Name
@mac.com names look like emails but are only Apple IDs and iChat/AIM Valid Screen Names.
The AIM registration page seems to be pushing you to register [email protected] This is relatively new and I have not followed through the pages to find out if it a valid AIM email (Previously you could register a name without an @whatever.com suffix)
8:16 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Question:-
So I have my current [email protected] email in iChat as I thought as I had linked that to an Apple ID it was a Valid iChat Name. It keeps coming up with a UserName or Password Invalid message. What do I do next ?
Answer:-
Open iChat
Go to the Menu under the iChat name in the Menu Bar and then Preferences and then Accounts in the new window.
Commonly written as iChat > Preferences > Accounts as directions/actions to take.
If it displays with a Yellow running name in the list you have a choice.
Either register it at AIM (I would use a different password to the ISP Login) and then change the password only in iChat (It may take you to confirm any Confirmation email from AIM first) in iChat > Preferences > Accounts
Or you register a new Name at AIM (Or at @mac.com) and enter that (details below)
If you have a Blue Globe name (@mac.com) that will not Login the chances are that it the password that is the issue.
Apple lets you create longer passwords than can be used with the AIM Servers.
Change the Password at iForgot to no more than 16 characters.
Then change the password in iChat as details above.
Adding a new Account/Screen Name in iChat (that is valid with the AIM servers)
Open iChat if not launched.
Go to iChat Menu > Preferences > Accounts
Click the Add ( + ) Button at the bottom of the list.
Choose in the top item drop down either @Mac.com or AIM depending on what you registered
Add the name (with @mac.com the software will add the @mac.com bit)
Add in the password. (If you don't add it now iChat will ask you each time you open it)
Click Done.
The Buddy List should open (New Window)
The Accounts part of the Preferences should now have the new name and you should be looking at the details.
You can add something in the Description line which will then title the Buddy List (Useful when you have two or more names) and make it show up as that in the iChat Menu > Accounts and the Window Menu of iChat when logged in.
You can then highlight any other Account/Screen Name you don't want to use and use the Minus ( - ) Button to delete it.
8:39 PM Friday; June 10, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Copy and paste buffers not working correctly in iOS 8.1m

Both iPads2's in my family arsenal are exhibiting what I believe to be a bug in the iOS8.1 (perhaps corrected by 8.1.1?), in the cut/copy & paste buffer stack.
When invoking the operation to copy and paste data from one application to another, the paste action consistently selects the previous (e.g., stack level 2 rather than 1 or Top) data as what is to be pasted.
In other words, if you have used the copy and paste routine twice, the second pasting will supply one with the paste data from the first operation, rather than the desired data from the second copy and paste operation.
Copy and paste appears to work correctly from within a single application, but consistently fails when copying data from one application to another.
Does anyone know of a work-around for this bug? Is it a bug that others have identified? Is there a new selection filter menu option for copy and paste operations, and what method is used to invoke the menu?
I hope this is addressed soon, as I use Cut/Copy & Paste operations extensively (I've already had Carpal Tunnel Release surgery once and don't relish a repeat performance, no matter how successful the first was in correcting the damage).
Any clues as to what's going on here?
thanks in advance,
labernache

All you can do is simply see if iOS 8.1.1 helps you with this. With some people it has, and others it has not. I would also recommend doing a clean install of your system, too.
Follow this procedure for a Troubleshooting Methodology ... basically reset to factory default condition -BUT- be sure to do the following methodically and also to follow the part with Apple Support!
First you want to make sure you have several backups of your data and done with a couple of "different" sources. Be sure to understand what data is backed up and what is NOT on iCloud Backup and iTunes Backup. Use a variety of methods for backup ... you might check into Dropbox, in addition to your Apple options.
Then turn off your desktop anti-virus software when using iTunes for this reset to factory default. After you do that reset, then leave your iPad in its factory default state and see how it operates then. If you encounter any problems in that factory default state, then take it to Apple Support, and let them know that you have just reset it to that state with iTunes and have not put any of your data back on and it is operating in this fashion (whatever the problem is) in that pristine state. Make sure you keep that trouble ticket number, because if it has to be escalated through Apple Support, you're going to find all communications tied in with that number. If the lower level help isn't able to help you, then escalate it to a higher level to examine the problem. Keep at it with that trouble ticket number until Apple Support arrives at a solution to that problem. Be methodical and keep at it.
On the other hand, if everything is okay with the factory default condition, then restore your backup. Some people have discovered that the problem resides in the apps or something in the restored backup. If that's the case, then it's going to be trying and difficult to find out which developer's app is causing you the problem. And ... it's true ... that a developer not following Apple's instructions and guidelines for his app can CAUSE YOU TROUBLE. This kind of thing does happen from developers, especially when a new system upgrade comes out, because some developers ignore what Apple tells them about changes coming, and what they do BREAKS SOMETHING.
This is a troubleshooting methodology that you are going through. See it through to the end.
Choosing an iOS Backup Method (Should I Use iTunes or iCloud to back up ...)
https://support.apple.com/kb/HT5262
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Create and Delete iPhone, iPad and iPod Touch Backups in iTunes
http://support.apple.com/kb/ht4946
iOS: Troubleshooting Encrypted Backups
http://support.apple.com/kb/TS5162
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414

SQL DEVELOPER cut and paste does not work, slow and cannot work fast.

I have lots of difficulties using SQL Developer, the cut/paste does not work properly, when I type search in he code editor it just paste or type the test in the source code not in the serach box. Very hectic I'm pallning to swicth to TOAD until they a a good version.

Hello Aukhez,
I'm sorry to hear that you're having problems with SQLDeveloper - personally, I've never had any problems with cut/copy/paste and searching, and I've been using SQLDeveloper from v1.0 to the current version, on practically every version of the JDK from 1.5-1.6u16 on both Windows and Linux.
Sorry to state the obvious, but perhaps if you could provide a bit more specific information - such as platform, version, etc - and details of what you tried to do, someone here might be able to help...? Regarding speed, there are quite a few things you can do to make this better, but again, without knowing your setup, it's hard to give you proper directions. Plus, you'll find numerous threads here and on google about what you can do to improve speed.
Regards,
John

Copy and paste is not working

Hi,
I am using Windows 7 Enterprise Edition 32 bit with Service Pack1 Copy paste is not working frequently. Please help me to solve the issue.
Regards,
Boopathi S

Hi,
What do you by "I used CTRL+P to paste"? As I know, we usually use copy\paste with ctrl+C\ctrl+V.
More information would be helpful.
Anyway, if this issue only happened in IE, then what is the result is we copy something with right-click\Copy?
You can also launch IE in add-on mode to tset this issue, click "Start", type "internet", then click Internet Explorer (No Add-ons).
Meanwhile, clear browser history\caches\cookies, etc. Tools\Internet Options\General\Delete...
Yolanda Zhu
TechNet Community Support

In SharePoint Document Library Cut and Paste option not working correctly.

Hi,
I have a SharePoint Document Library which has the following.
Folder1 which contains two files named as a File1 and File2
Folder1 ------------> File1 & File2
Folder2 has no files.
Now i am cut the file "File2" from Folder1 and paste in to Folder2.
Issue is "File2" not permanently remove from "Folder1". It is retaining in "Folder1" It self.
Can anyone tell me. What is the issue in it?
Regards
Poomani Sankaran

Hi Poomani,
According to your description, “File 2” still exists in Folder1 after it is been cut and paste to Folder2.
Can you provide more details about how you perform the operations?
I tried to move the file between folders in a library in the two ways below, both work without issue:
1. “Open with Explorer”: cut and paste the file in the Windows Explorer interface;
https://support.microsoft.com/kb/2629108?wa=wsignin1.0
2. In the “Site Content and Structure”, use the “Move…” feature of a library;
https://support.office.com/en-za/article/Work-with-site-content-and-structure-30fcaad9-02b1-4347-8b03-e1ccc5a4c19f
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support

Copy and Paste does not work in filter statement of table data

I am using SQL Developer 3.0.04. I can not copy nor paste in the filter criteria when watching or editing table data. Is it a bug or do I have to change some settings?

Hi Sven,
I did a bit more research and now I hope we will be talking about the same thing. Bear with me and let me clarify. In terms of my prior comment about the process necessary to copy a value from a data cell into the clipboard, I was totally off-base. Once the focus is on a data cell, all one need do is Edit menu|Copy or ctrl-c. I have no idea why I had trouble with that yesterday.
Anyway, getting back to what's relevant with regard to your issue:
1) If something is in the clipboard, then both Edit menu|Paste and ctrl-v work for a data cell target.
2) If something is in the clipboard, then Edit menu|Paste fails for a data tab filter target.
3) If something is in the clipboard, then ctrl-v works for a data tab filter target.
So obviously conditions exist where pasting to the data tab filter can work. But here is a scenario where I found a problem similar to what you describe:
1) For the EMP table in SCOTT, display all employees in the data tab.
2) Apply a filter. For example, filter on JOB='SALESMAN'. Now 4 salesman, all in dept 30, are displayed.
3) Next you decide to view only employees in dept 30.
4) Copy the value 30 from the DEPTNO column. Carelessly put the focus on ENAME column in one of the data tab rows.
5) Next focus on data tab filter to blank out JOB='SALESMAN' predicate. Drop down to select DEPTNO. Append an = sign.
6) Finally Edit menu|Paste. Instead of seeing DEPTNO=30 in the filter, we see...
7) The filter contains nothing and is disabled (greyed out).
8) The ENAME column of the prior focus now contains the value 30 rather than the a salesman's name.
Your case may be different/more complex, but at least this simple case demonstrates in a repeatable fashion what I noticed but didn't describe very well yesterday. I have logged the following internal bug:
Bug 12753266 - EDIT MENU PASTE INTO DATA TAB FILTER DOES NOT WORK AND MAY DISABLE THE FILTER
Using the rollback button, blanking out any filter value and hitting enter displays all original employee rows.
Regards,
Gary

Copy and Paste functions not working

I'm using windows 7 and 8. I can copy and paste photos , but when I copy a URL the paste function does not work. It is greyed out.

Hi,
Are you using remote desktop or other similar software? Please attempt to kill the related process, such as rdpclip.exe, etc.
Where do you want paste the URL?
Have you tried composite key Ctrl + V?
Please try running SFC /scannow command to fix some corrupt system files.
Andy Altmann
TechNet Community Support

I have installed flash player several times and it will not work.

I have completely uninstalled and reinstalled it several times to no avail. itsays it successfully installed but refuses to work.

What is your operating system & web browser?
What exactly means "will not work"?

Synchronize settings and copy and paste settings not working LR 4.1

Recently upgraded to LR 4.1.
The copy and paste settings and also synchronize setttings in LR 4.1 has stopped working.
Rebooted, nothing new added
AMD Phenom II X6 1100T 3.60gh
16 GB ram
64 bit

I am also seeing issues in 4.1 with Synchronize settings. I'll giove an example:
Select all images, change the white balance in most selected image, Click "Sync..." have only the "white balance" check box checked, click Synchronize biutton. All images in that folder appear to have synched, but looking more closely, some of the images did not get the white balance setting applied - this is really random also. Had the same issue trying to sync exposure across all images in a folder - 150ish images.
Never seen this in any version of LR prior to 4.1 - I have had them all since 1.2.
I am running Windows 7 x64 8GB on i7 920.
Hopefully Adobe are investigating this issue.
Paul A

Fact Time and iMessage will not work on

Face Time will not verify my emails and phone number on my iMac. Face Time is working on my iPad 2 and iPhone 5. All were working fine up until 2 days ago. I tried to Face Time on my iMac and I had to login and verify. Verify would just spin, spin, spin. iMessage will not work on the iMac as well. Same thing, was working fine up until Face Time quit functioning. All devices have been working on the same router/Wi-Fi. My operating system is Mavericks. Have had no problems until now. HELP!

Hello there, bowlinggolfer.
The following Knowledge Base article offers up some great steps for troubleshooting issues with FaceTime for Mac:
FaceTime for Mac: Troubleshooting FaceTime
http://support.apple.com/kb/TS4185
This other article includes recommendations for Messages as well:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Thanks of reaching out to Apple Support Communities.
Cheers,
Pedro.

Control key copy and paste, etc., not working

I have just purchased a T440S Thinkpad. I am alarmed that Ctl + C and Ctl + V do not work. Also, I cannot use the Control key in combination with + and - to zoom in and zoom out. The Control key in combination with the letter i does not italicize a blocked word. Does anyone have a solution to this problem? Will Lenovo technicians be able to provide a fix for this serious problem? David

Is this the case for both CTRL keys (you have a CTRL key on each side of the space key) or is one of them working?
If the right CTRL key is working and the left CTRL key isn't, are you sure you didn't swap the Fn and CTRL key in BIOS?
-gan

Scale Attribute Times and Paste Attributes not working as did before

Similar Messages

Maybe you are looking for