Scale based marker are too small

Hi,
I'm using Image Marker Styles with a marker size in meter.
In a wholeImage MapViewer displays them correct. But if I use single FOI images MapViewer displays them too small.
I got this behavior with MapViewer Ver11_B091229. MapViewer Ver11_B090416 displays the Marker in a correct size.
Thanks,
Cord

Hi Cord,
when you say displays too small, is it always small for different zoom levels? The marker does not change sizes as you zoom in/out while rendering as a non wholeImage FOI ltheme? Some issues have been found with scalable styles and FOI entities (more related with advanced styles). If you have access to patches, please try patch 9668208 and let us know the results.
Thanks.
Joao

Similar Messages

  • Error "roll area too small"! Can't find a way to resolve!Please hep.

    Hello everyone:
           i am getting the error "roll area too small" when I am looping through an internal table and calling the code below on change of some value.
    ===
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            authority              = space
            immediately            = space
            new_list_id            = c_x
            no_dialog              = c_x
           user                   = sy-uname
          IMPORTING
            out_parameters         = params
          EXCEPTIONS
            archive_info_not_found = 1
            invalid_print_params   = 2
            invalid_archive_params = 3
            OTHERS                 = 4.
        IF sy-subrc NE 0.
          CLEAR : params.
        ENDIF.
    The printer destination has to be set up
        params-pdest = v_dest.
        params-prtxt = v_spool_text.
        params-paart = lc_paart.
        params-prtxt = v_spool_text.
        params-primm = 'X'.
        params-prrel = space.
        NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
        NEW-PAGE PRINT OFF.
    ======
    I posted this before and got some feedback and tried everything but it is not fixing the problem! I rewarded points to all the answers. I had basis increase roll area size, optimized code and did everything I can but I am still getting the same error "roll area too small". Same program works in 4.6C but in ECC6.0 I get this error! I have other programs that generates more than 10,000 pages in the spool but the program I am working on creates only 7700 pages! I  am not sure what else is changed in ECC6.0! Could someone please give me any ideas? rewards assured.
    thanks.
    Mithun

    Hello Mithun,
    Even i think increasing the roll area should have helped
    Are both the systems WIndows based  or is one unix based ?
    see this
    http://listserv.sap.com/pipermail/linux.general/2001-July/thread.html#670
    and search for "roll area too small" in the list of links
    it may help
    Also,
    in this solution, it says to use 'field groups'
    http://www.sapfans.com/sapfans/forum/r2all/messages/42.html
    Try these links as well - others with the same problem
    http://marc.info/?l=mysap-linux-general&w=4&r=1&s=%22rollareatoo+small%22&q=b
    Message was edited by:
            Kris Donald

  • Photoshop CC icons and text are too small: how to adjust so they're readable? [was: Joanne]

    I have just downloaded Creative Cloud on a new computer.  The new photoshop icons and text are too small for me to see or work with.  I cannot seem to adjust this so its "useable"

    Hey Bob,
    Ive put feature requests for this in before and I know many others have as well. Is there any way to see if Adobe is actually working on this? I dont really consider this a feature request, it should be standard with the software. A feature request would be something like creative cloud libraries, not the ability to make font sizes and icons bigger.

  • I can't delete partition in disk utility, it keeps telling me that "the changes are too small"

    I previously split my disk into two different disks, however I want to combine them together again, yet i was unable to delete the second partition. I can't delete partition in disk utility, it keeps telling me that "the changes are too small"
    Plz help!!!!!!

    Make at least two complete backups of all your data. Boot from another drive and partition this one as desired. Restore the data.

  • How can I sort my photos by size?  I need to get rid of those which are too small to print.

    Is there a way to sort individual photos in iphoto by size.  (I know you can sort photos in finder- picture by size, but mine are in iphoto). I am organizing my thousands of photos into files within iphoto in order to print hundreds.  I am finding that many are too small to ever print (20-30kb) , and would like to delete those en masse rather than waste time sorting them, but cannot find a way to do that.  Does anyone know if there is a way?  It would be a terribly useful function.  Also, sorting by size would enable you to resize photos that take massage amounts of room unneccesarily.  Thanks for any info.

    No there is no way to do this.
    Also, sorting by size would enable you to resize photos that take massage amounts of room unneccesarily.
    No it wouldn't. There's no way to change the filesize in iPhoto, it always preserves the original file.

  • I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the

    I've just bought a Macbook Pro 15" and I'm trying to use Photoshop, but the resolution its displaying the images at for 100% are too small. I have to design for the web, so need to be intricate with detail, but I'm finding it adjusts the resolution of the image right down. (I mean you can see the image clearly, but it's too small to edit). When I look at Safari and see a web page at 100% it's clear, but the same page displayed in Photoshop CC appears 50% of the size (even though it says it's 100%)   If I move the application window to another screen it adjusts it correctly  – leaving all the pallettes, menus and tools correctly sized as they are on the retina display   Is there some way to adjust the way Photoshop CC displays images so it is more consistent with what you actually see?   There doesn't seem to be any answer on the Adobe forum, so hopefully someone here can shed some light.  MacBook Pro with Retina display, 15", OS X Yosemite (10.10.2), Photoshop CC 2014

    I tested both ways. With "open in low resolution" ckecked the size of the images is cool, but it is low-resolution including Photoshop appearance.
    If "open in low resolution" is unckecked the appearance is good but the very small size.
    See the image below. It has 650 x 732 px, 72 dpi. The font of the text "Neste aniversário ..." is with 18pt.

  • To everyone who thinks the fonts are too small on ...

    To everyone who thinks the fonts are too small on the N9 i suggest you contact Nokia about this issue. I know i am!

    please see my post here: /t5/Maemo-and-MeeGo-Devices/N9-Font-too-small/m-p/1338481#M32968

  • No cursor on any website, and boxes are too small to type username and password. Example I can't type username and password for yahoo e-mail

    Example of no cursor. Any website, such as youtube, there is no cursor in the box, and there are no letters when I type, but the system recognizes what I type. As for e-mail, hotmail works o.k., but with yahoo the boxes for username and password are too small, there is no cursor and I can't type anything. With gmail, there is no cursor, but I can type my username and password.

    Try:
    iOS: Troubleshooting FaceTime and iMessage activation

  • The fonts are too small on my imac desktop and web browsers.  Where can I increase the size?

    The fonts are too small on my imac desktop and web browsers.  Where can I increase the size?

    babowa wrote:
    The only way to increase the fonts on your desktop would be system wide by going down a notch on the resolution. Some people won't do it because it increases the pixel size so the fonts won't be quite as sharp; I decided I'd rather have that than having to squint continuously. Go to System Preferences > Displays > Scaled > this will give you all resolution options available. No harm in trying - just check the default (top) choice again if you don't like any of the others.
    It's a b*&^ch getting old .  I still use the screen zoom instead of decreasing resolution, but maybe soon ...

  • The subtitles are too small on ATV2

    the subtitles are too small on ATV2, at the movies I rent, it is not possible to enjoy the movie and read the text at the same time, what makes Apple here???

    I have the same problem, changing it to large in the Accessibility menu makes them too large and annoying. I hope Apple fixes this soon!

  • Screen Output area too small

    Hi All,
    When I am going to MIRO system is showing the Message (#00118) Screen output area too small.
    and the screen will become blank.
    Please guide me.
    Thanks in advance.
    Pavan H S

    hi
    take help of abaper and try activating the screen program for MIRO in se51
    regards
    kunal

  • Phone and Tablet versions are too small

    When using a phone or tablet to view my website www.elrocco.com.au the pages are too small.
    The desktop version is fine.
    I use GoDaddy for domain management and forward to elrocco.businesscatalyst.com
    When I use the url elrocco.businesscatalyst.com directly on the phone or tablet, everything is fine.
    Is threre something I need to do on GoDaddy to ensure the phone and tablet versions display correctly?
    Thanks in advance for you help.

    It appears you were able to figure this out as the site looks just fine (and identical to the BC's system domain) when viewed through an iPhone.
    Thanks,
    Vinayak

  • Roll area too small

    Hello All,
    We have a background job which is getting canceled saying Roll area too small
    can any 1 of you please explain what exciatly it means.
    Regards,
    Ravi

    Hi Ravi,
    This is related to Memory Allocation Sequence for all Work Process Types.
    Please check the roll area parameters in your system. If the size allocated to roll area is low then background jobs will not finish successflly.
    Please check the all other parameters also related to Memory Allocation.
    ztta/roll_first: Defines the first part of the roll area that is allocated to dialog process
    ztta/roll_area: Defines the total roll area per work process
    rdisp/roll_SHM: Defines the size of the roll buffer
    rdisp/roll_MAXFS: Defines the size of roll buffer and roll file
    em/initial_size_MB: Defines the fixed size of extended memory
    ztta/roll_extension: Defines the user quota for extended memory
    abap/heap_area_dia: Defines the limit for the amount of local memory allocated to dialog work processes
    abap/heap_area_nondia: Defines the limit for the amount of local memory allocated to non-dialog work processes
    abap/heap_area_total: Defines the limit for the total amount of heap memory allocated to all work processes
    Regards
    Krishna Vanga

  • Fonts on websites with firefox are too small

    Hi all
    I have a problem with font size on firefox. They are too small, take a look:
    http://img182.imageshack.us/img182/3873 … ot1oo7.jpg
    I run Arch with KDE 3.5.4 + gtk-qt-engine + firefox 1.5.0.7

    <match>
    <test><string>tahoma</string></test>
    <edit><string>Bitstream Vera Sans</string></edit>
    </match>
    <match>
    <test><string>verdana</string></test>
    <edit><string>Bitstream Vera Sans</string></edit>
    </match>
    <match>
    <test><string>arial</string></test>
    <edit><string>DejaVu Sans</string></edit>
    </match>
    <match>
    <test><string>time new roman</string></test>
    <edit><string>Dejavu Sans Mono</string></edit>
    </match>
    <match>
    <test><string>helvetica</string></test>
    <edit><string>DejaVu Sans</string></edit>
    </match>
    Those are the ones I got, I even tried to replace helvetica. It's not working, though. I see helvetica on most sites now.

  • The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier.  They are OK in Photoshop CC.  I have been unable to find anyplace to adjust the font size.  I have Windows 7 Pro.  Looking at the Photoshop version history, it lo

    The drop down menus in Photoshop CC 2014 are too small to read without using the magnifier.  They are OK in Photoshop CC.  I have been unable to find anyplace to adjust the font size.  I have Windows 7 Pro.  Looking at the Photoshop version history, it looks like this problem comes and goes as Photoshop is updated.  It should be an easy fix.

    Try the Photoshop CC 2014 Preference experimental section 2X UI option

Maybe you are looking for