Scale bug during export in CS3!!!

I have a slideshow which all of the pics are scaled with the option "scale and crop edges". When I preview it in encore it looks perfect. The problem occurs when I export/builds the dvd, flash or whatever. When I playback the slideshow it looks like some of the pictures jumps between the two scaling options "scale and crop edges" and "scale and apply matte". In one frame the picture fills the entire screen and in the next frame it has 1/4 of black matte on each side. The jumps in scaling happens totally random, or at least I can`t find a pattern.
I appreciate all feedback!
THANX

You can't "fix" overscan. Your audience has TV sets that are overscanned to some degree.
But your audience also has computer monitors that (most likely) don't overscan at all.
You have to create content that takes overscan into account if your target audience will be viewing that content on a TV set.
You can safely ignore overscan if your finished DVD will be shown *exclusively* on a computer monitor.
If we eliminate overscan as a consideration at all, then I have to ask: does the scaling change occur before, during or after a transition between static slides? How about changes between slides with motion effects applied?

Similar Messages

Premiere CS6 /Totalcode pluging, bug during export

Hello,
I try the demo version of total code for Premiere 6.0.3
I am very disappointed, because in H264/AVC export ,
preset HDTV 1080i
frame rate changed from 25i to 50p
the value of Reference Frames (Advanced setting panel) is always ignored and set to 3 in output,
Changing this value, or any B-frame setting has no effect, output is always 3 Ref Frames. (Checked via Mediainfo)
This is very annoying as many Multimedia-disks players (Like DVICO S1) does not support well Ref Frames greater than 2 (=> generate lags during video play).
This is a bug in Totalcode, as it was previously working in MainConcept Codec suite 5.1
Any way to bypass this bug will be appreciated, I plan to migrate to Totalcode for Cuda acceleration.
Olivier

That is a question for Main Concept, not Adobe
http://www.mainconcept.com/products/apps-plug-ins/transcoding/totalcode-studio.html?gclid= CNbUrIiG0rQCFYl7QgodgBsABQ

Scale document during Export

Hi All!
Ever since Apple pulled the plug on print to PDF in Snow Leopard, we've been forced to export to PDF. Which is sort of fine. Except - say I want to output my document at 95%, how do I do that with Export? Rescale document in Acrobat, you say? Even if I knew how to do that, it's stil a major pain.
Anyone have any suggestions? Can someone guide me in rescaling a doc in Acrobat?
Thanx, appreciated.

Export does not support scaling. You can:
Print to PostScript file with scaling and Distill PDF.
Place the INDD file into a new document, scale, then export PDF.
Place the 100% PDF into a new document, scale, then export PDF.

Error - During Export Grid Data to CSV

OS: Windows XP
Detail: Eror Message Pop-Up During Export Grid Data to CSV. Error Message:
ORA-00972: identifier is too long
Vendor code 972.

There is a bug with all export formats if you are exporting without using aliases and you export a long text string (see More export issues/bugs
This will fail:
select 'testing query execution on export' from dual
This will work:
select 'testing query execution on export' dummy from dual

During export from Discover to Excel, Time Format changes to Number Format

Hi
I have a seconds column which is of number datatype. But in my report, I am converting the number in *0HH:MI:SS* format. For example, I have *4952534 seconds*. So my report is showing *1375:42:14* which is a Time Format. It looks good when I view the data in Discoverer Viewer or Plus. But when I try to export the data to Excel, the time format gets converted to *4952534 seconds*, which is creating problems. So can you suggest on how can I preserve the formatting during export to excel from discoverer.
Thanks
Sachin

Hi,
Excel will not implement the 0HH:MI:SS data format, it just gets the field as a number. You will have to format the field into text using the calculation from my previous post.
Rod West

[Error during Export] R3load exited with return code 11

Hi guys,
While performing and Unicode Migration, during Export Phase, Migration Monitor returned the following error while exporting a package
ERROR: 2014-06-01 10:57:44 com.sap.inst.migmon.LoadTask run
Unloading of 'REGUC' export package is interrupted with R3load error.
Process '/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error' exited with return code 11.
For mode details see 'REGUC.log' file.
Standard error output:
sapparam: sapargv(argc, argv) has not been called!
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
REGUC.log details:
(As you see, it does not provide reasons of this error, all messages are informative and alike all other Packages logs)
/usr/sap/ECP/DVEBMGS00/exe/R3load: START OF LOG: 20140601105052
/usr/sap/ECP/DVEBMGS00/exe/R3load: sccsid @(#) $Id: //bas/740_REL/src/R3ld/R3load/R3ldmain.c#4 $ SAP
/usr/sap/ECP/DVEBMGS00/exe/R3load: version R7.40/V1.8
Compiled Jul 23 2013 21:30:53
/usr/sap/ECP/DVEBMGS00/exe/R3load -e REGUC.cmd -datacodepage 4102 -l REGUC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC001.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE "
(GSI) INFO: hostname = "ecp "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
Tried to find what does R3load Return Code 11 means, but I couldnt find further information on this.
Any hint of what is causing this error?
(Please disregard any Filesystem issues since all of them have available space)
Best!

After using latest R3load patch, it provides furher information on the log file.
-------------------- Start of patch information ------------------------
patchinfo (patches.h): (0.070) R3ldctl: fix CDS views creation in upgrade export mode (note 2
017805)
DBSL patchinfo (patches.h): (0.022) Smaller corrections in release 7.40 (th, dp, vmc, dpmon)
(note 1821404)
--------------------- End of patch information -------------------------
process id 27326
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): US7ASCII
(EXP) INFO: check NameTab widths: Ok.
(DB) INFO: Export without hintfile
(RSCP) INFO: UMGCOMCHAR read check, OK.
(RSCP) INFO: environment variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(RSCP) INFO: UMGSETTINGS nametab creation: ok.
(RSCP) INFO: Global fallback code page = 1160
(RSCP) INFO: Common character set is not 7-bit-ASCII
(RSCP) INFO: Collision resolution method is 'fine'
(RSCP) INFO: R3trans code pages = Normal
(RSCP) INFO: EXPORT TO ... code pages = Normal
(RSCP) INFO: Check for invalid language keys: activated
(RSCP) INFO: I18N_NAMETAB_NORM_ALLOW = 999999999
(RSCP) INFO: I18N_NAMETAB_NORM_LOG   = 1000000002
(RSCP) INFO: I18N_NAMETAB_ALT_ALLOW = 10000
(RSCP) INFO: I18N_NAMETAB_ALT_LOG    = 10003
(RSCP) INFO: I18N_NAMETAB_OLD_ALLOW = 0
(RSCP) INFO: I18N_NAMETAB_OLD_LOG    = 500
(RSCP) INFO: init SUMG interface (3#$Revision: #1 $); package name: "REGUC".
(RSCP) INFO: "REGUC003.xml" created.
(GSI) INFO: dbname   = "ECP20030615080638
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "ecp                                                             "
(GSI) INFO: sysname = "SunOS"
(GSI) INFO: nodename = "ecp"
(GSI) INFO: release = "5.10"
(GSI) INFO: version = "Generic_142900-13"
(GSI) INFO: machine = "sun4u"
(GSI) INFO: instno   = "6120023288"
(RTF) ########## WARNING ###########
        Without ORDER BY PRIMARY KEY the exported data may be unusable for some databases
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: cannot find version token "ver:" at line 1
(RDI) WARNING: /respaldo/ECP_Export/ABAP/DATA/REGUC.STR: unknown file format, assuming version 2
(EXP) INFO: table REGUC will be exported with sorting (task modifier)
------------------ C-STACK ----------------------
[0] t_splay ( 0x1020df850, 0xb3, 0x4386, 0x100a02078, 0x0, 0x1020df870 ), at 0xffffffff7b9629
94
[1] t_delete ( 0x1020df850, 0x4348, 0x1d9870, 0x1000d0408, 0xffffffff7bb3c000, 0x0 ), at 0xff
ffffff7b9627e4
[2] realfree ( 0x101ee7590, 0x1f82b1, 0x1d9cd0, 0x1f82b0, 0xffffffff7bb3c000, 0x101ee7590 ),
at 0xffffffff7b9623b0
[3] _malloc_unlocked ( 0x7d40, 0x200000, 0x101edf840, 0x0, 0x101ee7580, 0x0 ), at 0xffffffff7
b961eb4
[4] malloc ( 0x7d39, 0x2388, 0x1da428, 0x10038fe84, 0xffffffff7bb3c000, 0x2000 ), at 0xffffff
ff7b961c28
[5] rstg_get ( 0x2, 0x0, 0x2, 0x7d10, 0x0, 0x10077d8c0 ), at 0x10038ff4c
[6] c3_uc_new_cache ( 0x100a02078, 0x284db0, 0x284c00, 0x10077d8c0, 0x100a02108, 0xb3 ), at 0
x1000d1ce8
[7] c3_uc_seek_cache ( 0xb3, 0xff79, 0xffffffff7ffcae3e, 0x100a02078, 0x10189fa48, 0x10077d8c
0 ), at 0x1000d188c
[8] c3_uc_new_tabcache ( 0x0, 0xb3, 0x4386, 0x100a02078, 0xb3, 0x10077d8c0 ), at 0x1000d13fc
[9] c3_uc_insert_record_in_cache ( 0xffffffff7ffcb04e, 0x10189fa48, 0x100a02078, 0x100a024c8,
0xb3, 0x1058c8f84 ), at 0x1000d0408
[10] c3_uc_insert ( 0x0, 0x100a02078, 0x0, 0x0, 0x10077d8c0, 0xffffffff7ffcb04e ), at 0x1000c
f944
[11] c3_uc_convert_table_entry ( 0x1015c61f8, 0x0, 0x100a02078, 0x0, 0x10189f408, 0x31a000 ),
at 0x1000ce314
[12] c3_uc_convert_logic_table ( 0x1015c61f8, 0x100a02078, 0x0, 0x4a, 0x100638dc0, 0x10077d8c
0 ), at 0x1000cdb18
[13] c3_uc_convert_cluster_data ( 0x100a02078, 0xffffffff7ffcbc50, 0x1015c6428, 0x1015c61f8,
0x10077d8c0, 0x0 ), at 0x1000cd10c
[14] c3_uc_convert_cluster_item ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x1038
6f6e0, 0xffffffff7ffcbb8c, 0x100a02812 ), at 0x1000be1d4
[15] process_task ( 0xffffffff7ffcbc78, 0xffffffff7ffcbc50, 0x100954770, 0x100a02810, 0x10063
32e0, 0x10077d8c0 ), at 0x1000b2f58
[16] CnvCluster ( 0x1014642d0, 0x100954670, 0x100aa9610, 0x2849b8, 0x284800, 0x6cb978 ), at 0
x1000b1f8c
[17] cnv_clust2 ( 0x100aa9580, 0xffffffff7ffcc258, 0x100954770, 0xfc0, 0x107d00, 0x100954670
), at 0x100062714
[18] cnv_cp ( 0x100aa9580, 0xffffffff7ffcc258, 0x100aa95e0, 0x0, 0x10077d8c0, 0x1d6c00 ), at
0x100064644
[19] process_buffer ( 0x100aa9580, 0xffffffff7ffcc258, 0xfff00, 0x100a97bd0, 0x10, 0x100aa95b
0 ), at 0x10007162c
[20] execute_table_unload ( 0xffffffff7ffed610, 0xffffffff7ffdc4b0, 0x0, 0x100aa9580, 0xfffff
fff7ffcc258, 0x10077d8c0 ), at 0x10006c488
[21] export_table_task ( 0xffffffff7ffed610, 0x0, 0xffffffff7ffdc368, 0xffffffff7ffcc330, 0xf
fffffff7ffeedb8, 0xffffffff7ffeec60 ), at 0x10006c934
[22] db_unload ( 0x100a97b0d, 0xffffffff7ffed610, 0x0, 0x10077d8c0, 0xffffffff7ffeec60, 0xfff
fffff7bb47540 ), at 0x10006d148
[23] main_r3ldmain ( 0x72ec00, 0xffffffff7ffff448, 0xffffffff7ffff228, 0xffffffff7bb47540, 0x
1005fc290, 0x0 ), at 0x1000514e0

Stitch lines created in a PDF/X-1a due to transparency flattening during export from InDesign

Has there been any sure fire methods to avoid the digital stitch lines created in a PDF/X-1a due to transparency flattening during export from InDesign? If I attempt to edit the PDF using the Acrobat Edit Text and Graphics tool the PDF is actually carved into sectors and images are not selectable as a whole. Also contrary to what I have read those white lines do indeed image from time to time. I could export as PDF/X4 to preserve the transparency but on occasion it would be advantageous to flatten it before supplying to the printer. Currently using CC and have done the usual things in an attempt to avoid the lines such as all text above transparent objects on a separate layer and 'Clip-Complex-Region' on export.
Thanks in Advance!

If the default High Res flattener preset is stitching make a custom preset that's all rasters and use it in the advanced tab of the PDF/X-1a preset

OBIEE 11.1.1.6.12 - value modification during export in tab delimited format

Hi all,
we have noticed unproper value modification during export in tab delimited format.
Please find example below:
The proper value is 24150170000011615 (it is state register number of enterprise).
The wrong value is 24150170000011600.
Correct value:
http://s12.postimg.org/v2gpqqzgd/obiee_1.png
How do we export data from obiee:
http://s23.postimg.org/6k7dwiezf/obiee_2.png
Wrong value after export:
http://s22.postimg.org/qdgqgogn5/obiee_3.png
What should we do to fix it?

The bigger picture is as follows:
I have a button on my report that essentially should download the output of report to tab delimited text file. This button is integrated with a custom built class which has a main method. When I click on the button, the logic written in the main method gets executed.
In this method I generate my internal table and pass to cl_gui_frontend_services=>gui_download method with parameters mention above.
I try debugging but every thing seems to be working correct when sy-subrc = 0 through executable program and it does not enter into the download method logic when i do it through main method, instead sy-subrc is straight set to 6 (unknown error).
Regards,
Pankaj.

Embed jpg in a pdf without re-compressing it during export or save?

I need to create a pdf-portfolio. Therefore I want the images included to look their best. I thought it a small matter to individually compress the images in photoshop for optimal appearance and size, and then to include them in a document for pdf-export. The idea is that you open up this pdf and see the images exactly as I saw them in the photoshop jpg previerw. So far I tried Illustrator and InDesign. Unfortunately both of these seem unable to just include the original jpg during pdf-export. They are completely set on recompressing the images. Either that or they will try to do away with the compression completely. You can choose the compression alternative "none", but then you will end up with a huge pdf-file, a couple of hundred megabytes in my case. If you chose any other compression alternative, the jpg will be degraded further during the second pass of compression that will take place during export. The images will look miserable.
So my question: Is there any way to get around this weird limitation in Illustrator or Indesign? And if not, what software should I be using to design a portfolio and include individually compressed jpg's and jpg2000?
Thomas

No, png will typically be much bigger in filesize, not an option if data size is a factor.
BUT, I found a solution: I downloaded & installed Acrobat XI Pro. In Acrobat I open the pdf that was saved from Illustrator. Then it's just a matter of replacing all images manually with your custom saved jpg's. Comparing pdf's: Saved from Illustrator: 8.3 Mb and ****** looking general impression, lots of banding and artefacts. Modified in Acrobat and resaved with custom saved jpg's: 5.5 Mb and much nicer looking images, with few apparent compression artefacts, no banding.

How to dereference objects during export flow

Hello!
I would like to export information from a referenced object during export flow but the referenced object is not part of the connector space object of the affected management agent. This is my demo configuration:
testEmployeeData:
- employeeId (anchor)
- personId (reference to testPerson object)
- telephoneNumber
- uid
testPerson:
- displayName
- givenName
- sn
- uid (anchor)
- employeeData (multi-value reference to testEmployeeData recors; can be null)
I have an SQL agent ("HR") that imports person and employeeData objects into the metaverse. The references seem to work as I can see them in the Sync Service Manager and they point to the right objects too. Now I would like to access some of the
referenced objects' data during export attribute flow. I have configured an export-only "Persons" agent that should export the personal data into an attribute-value file. This is what I would like the export flow to look like:
displayName <- testPerson.displayName
employeeId (multi-value) <- testEmployeeData.employeeId (*)
firstName <- testPerson.firstName
lastName <- testPerson.sn
uid <- testPerson.uid
The problem is now the advanced attribute flow marked with (*). The testPerson.employeeData field contains a multi-valued reference to all matching employeeData records which contain the employeeId. The output file should contain all matching employeeIds
instead of the reference values (GUIDs) but I can't get this to work. When I try to configure an advanced export flow rule flowing testPerson.employeeData to person.employeeId I just receive an error message stating that metaverse reference attributes cannot
be defined as source attributes.
Do I have to create an appropriate connector space object for this to work? Or is there some other way to dereference objects in order to get certain attributes? By the way, the person connector space object in the "Persons" agent is created by
provisioning code based on testPerson metaverse objects.
Regards,
Philipp

Philipp,
What you are trying to do cannot be accomplished the way you are trying to do.
Here are your options:
Use classic provisioning using rules extensions or
Use a workflow to deference attributes in FIM Service and flow flattened data into the target connector space.
My recommendation is to use the second option to accomplish what you are trying to do as I prefer to stay away from classic code for maintenance and support reasons.
Good Luck.
Thanks,
Jameel Syed |
Identity & Security Strategist | [email protected] |
Simplified Identity and Access Management

100% CPU Usage in CS5.5 Premiere Pro during export/encoding

I am wondering why my CPU usage is so high during exporting of my videos. My counter shoots up to 100% as soon as I start and hovers at 95% throughout the whole process. This seems dangerous to me so I wanted to bring it up here as I haven't found anyone with this same issue on this website or google. Here are my system specs:
i5-2400 CPU @3.10GHz
6 GB of Ram
64 bit windows 7
Geforce 660 ti graphics card (2gb)
They aren't top of the line but I feel like it should be capable of encoding. I've cleaned my fans and tried using avi and h.264 formats which both led to the same issues.
Any help would be greatly appreciated. I'm new to premiere pro so I'm sure I left some useful information out above.

"...the same results"
This means high CPU usage, right?
Correct
Are your exported media files ok?
I've only completed one because I was freaked out but yes they are fine.
I guess the thing I'm worried about is my temps going up really high because of the 100% usage. I thought that they were both entertwined as in high usage = high temps. I'll look for a temperature program to run while encoding and I'll monitor how high the temps get. You've given me hope here as I may have been making mountains out of mole hills. If the temperatures are high would you recommend more fans in my desktop?

CS5.0.3 Temp files on C during export even with scratch as E

I have a small project that uses alot of Photoshop files as graphics templates. I thought that because I set my scratch disks to "E" that whenever I would export, it would use "E" as my temp location for any temp files generated/needed during exporting. But for some reason, my exports have been crashing because I'm running out of room on my C drive during the export. I discovered that during exports, there are several Photoshop TEMP files being created on my C drive - each like 3 GB, eventually filling up my C drive. (I confirmed that I set the export render location to E) After the render/export, these Photoshop TEMP files disappear on C. Is this expected behavior? Is there something obvious I can do to make sure all files go to a separate drive? Thanks!

Adobe like many other applications use the Windows Variable Temp directory for cache files. As an example, if you export out of Premiere and select the queue to media encoder, it will show the C drive instead of the drive where the media is actually located with the Project file. That is because the source that media encoder is seeing is that Windows Variable Temp directory. You can change that by creating a Folder on the E drive called Temp. Then right click on Computer and go to properties. Select Advanced Settings on the Left and then Environment Variables on the bottom of that panel. You will see 2 Temp files and locations listed at the top of the Environment Variables Panel. Select edit and then type or copy/paste in the location of the temp directory created on another drive. Example - E:\Temp
Restart Windows and then the Variable cache should be moving to that directory. Keep in mind that Windows uses those for allot of things. So if that drive is removed or fails you will take a very long time to boot and it will boot with errors.
Eric
ADK

Lightroom 2 Freezing and Export to CS3 solution

Ever since I've had LR2 I have suffered random freezing and being unable to export to CS3.
I worked through the solutions in the knowledge base and found that by removing Skype from my start-up list, both problems have been cured.
Hope this is of use to others.

Thanks, Graham. Your O/S?

Multicam Editing Problem during Export Pr CC

Hey guys, first post.
i have been working on a pretty long multicam project (About 1h45m) in Premiere Pro CC
I was all done, and during export in Media Encoder i noticed that after about 45m of rendering, the preview window was still showing the beginning of the video. Upon further inspection, i noticed that the video appeared to be Looping. Sencing that something was wrong, i cancelled my render and reopened my project.
when the project reopened i could see that after a couple of edits, there were little white triangles and the top of the clips. I need to stress that before i started rendering, these triangles where not there.
And yes, when i played through my sequence, at every edit (camera change) the multicam clip would play from the beginning again. i have tried to remove everything after where this problem occurs and then drag the footage out. It does allow me to do edits again and it works fine, but i dont really want to spend hours doing it again, not understanding what the problem is and run the risk of it messing up again.
I am so very confused as to what is going on so any help at all would be awesome. Its very frustrating to work on something for so long and it fail during export.
I will attach an image showing a glimpse of what my problem is. (Please excuse the camera work)
Thanks again
Dan
Specs.
2012 iMac
Processor 3.1 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 512 MB
Software OS X 10.9.1 (13B42)

The triangles indicate hard media boundaries -- there are no more frames available from the source clip beyond that frame. If you don't have a triangle on a clip at an edit point, then the source media has frames available beyond the in or out point of that clip instance on the timeline.
There are a few things that might cause what you're seeing, so I recommend you check your multicam source sequence to make sure that it's referencing the correct media, and that all the media in your project points to the correct files on disk. Double- and triple-check that all the clip instances in the timeline point to the correct sequence or media. If the problem is related to clips on the timeline not pointing to the right thing, you could save yourself some work by trying to fix that instead of re-creating your edits. You should also see if you have any Auto-Saved projects that don't have the triangles at the edit points and that play the edited sequence correctly -- you could save yourself even more work.
Cheers,
Jeff

Unable to create ?volume in iPhoto during export

Should read "/volume/" in "iPhoto" during export. Had same message in version 6.0.6 and 7.1.5 and now 8.1.2. File is archived in original 6.0.6 but was upgraded in oyher two versions. Will not work in .jpg or .tiff formats. 3330 pictures are involved with different camera desig nations, ie. DSCN and IMG.
Any ideas?

Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). A Finder Window should open with the file selected. Does it?
Regards
TD

Scale bug during export in CS3!!!

Similar Messages

Maybe you are looking for