"Scale Images" has limited less than 180 files?

Hi,
I has made a Automator app that make jpeg images to a pdf.
For decrease pdf file size, I added automator task "Scale Images" and set "To Size (pixels)" to "960".
Then run Automator, the task seemed to be proceeding smoothly until 180 files.
But the task has not finished after ten minutes. The status icon was still in process "Scale Images (5/6)".
I stopped the app and try again. I have the same result. Nothing changed with the 181th jpeg file in Finder.
Does "Scale Images" has limitation less than 180 files?

mns579, thank you for reply.
I also tried under Snow Leopard (10.6.8). The workflow has completed without hanging!
The version of Scale Images on Snow Leopard is 1.2.
In the case of Scale Images 1.3 on Lion (10.7.4), it has never completed... under same files and same workflow.
It seems something buggy.

Similar Messages

HT1657 I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I found my answer in another Thread and it worked... so for anyone who needs it, here it is:
https://discussions.apple.com/message/19134562#19134562
Had the same problem and spoke with Apple Support. They had me reset the System Management Controller:
Shut down the computer. With the computer off, on the left hand side of the keyboard press shift+control+option along with the power button simultaneously and release. Wait 5-10 seconds and restart the computer.
This solved my problem and I was immediately able to purchase, download, and play an HD movie from iTunes w/o any error message.

Less than 180 days Depreciation Calculation process

Hi
I would like to calculate the depreciation exactly for >=180 days and <180 days. What all settings I have to do to get the exact days for calculation.
I have made the settings but its taking April to September for more than 180 days and October to March for less than 180 days.
I have to calculate it for till 3rd October as cut off for 180 days.
Thanks and Regards,
Sarvendra Singh

Please refer the below
http://scn.sap.com/thread/3420139
http://scn.sap.com/thread/2149582
http://scn.sap.com/thread/718175

Conversion Failure when combining less than 12 files

Cleared cache on Firefox. Files are less than 300kb each.
Any ideas?

Hi Stephen Howard,
No, nothing as such!!
Firefox is compatible with our products and services,
I would recommend you to update your Firefox browser to the latest version ( If it isn't Updated) and then Try Clearing Cache and History of your Firefox browser, Later try Converting that file again using Firefox.
Please let me know if you face any Problem.
Hope that helps
Regards,
Rahul Tyagi

Out put quality after DVD authoring is less than .mov file that fcp source

Anyone know why I would be getting a notable drop in quality after i make a dvd?
going from HF11 Cannon shot at 17 mbps into FCP. then out to compressor and using the high quality dvd setting.
then when i play my dvd i notice for example jaggies on some objects yet if i look at the .mov file that was ignested into FCP that has almost no jaggies. is there some setting i'm missing?
everything was set at 16:9 1080x720.
I'm up to my pits in information overload.
Someone with some idea or experience please help me out. thank you so much.

Here are some of your options as you look toward HD encoding.
Using Toast, Encore, or FCS 3 you can move toward blu-ray authoring and encoding. In Toast and FCS 3 you can make AVCHD disks which are blu-ray disks put onto single or dual-layer DVDs which is a huge cost savings. Your encoding is limited to 17 Mbps, but in h.264 that will still allow for decent quality. Encore will let you design a complete disk but it doesn't make AVCHD disks - you'll need to jump through some hoops in order to take an Encore project (but it can be done). Here's a workflow for that. As a side note this workflow is for using Final Cut Express - in FCS you have the added benefit of being able to work with 23.98 fps timelines.
Your other option it to move toward digital outputs. You can use something like an AppleTV to playback HD content (it'll be reduced to either 960x540 @ 30 fps or 1280x720 @ 24 fps. Or you can use one of the various media streams on that market now (SlingCatch, Western Digital WDTV, etc.) Personally I'm a big fan of the WDTV from Western Digital. It's affordable (around $100) and plays back all kinds of formats in HD up to 1080p. Plus it reads from flash drives or hard drives via USB. You can encode MP4 files for these types of devices in QuickTime, export from FCP, MPEG Streamclip, Compressor, etc.

Output quality less than source file in sequence FCP 7

I imported a .mov file into my sequence. It is 1920X1080 Apple ProRes.422. 7 1/2 mins. long. 6.18GB.
I added a new audio file for the entire sequence. Inserted a few edits to the credits using Motion.
I exported, first at Apple ProRes 422 HD also 1920X1080. It ended up being over 9GB. The quality was worse than the
source .mov file. These were both auditioned in Quicktime. The original .mov file looks fine at full resolution,
but not after my export. I've read the manual, consulted my online tutorials, read forums. I believe I have set all my
export settings correctly, yet it doesn't export with the crispness of the original file.
If it is important, the thin color bar just above the playhead and timeline is light purple.
Any suggestions would be greatly appreciated.

Two things are screwing you up.
1. Your sequence frame size is not the same as your original media.
2. Your sequence compressor is h.264 not ProRes.
Take the original clip and drop it into a new sequence.
When FCP asks if you want to match the clip settings, click yes.
Delete that clip then go to your original sequence and copy all the clips then shift over to the new sequence and past them into the timeline.
You may have to remove any distortions (resizing) to have the clips play in full screen.
Export that edit using Export Quicktime (NOT quicktime conversion) with "current settings" and "make self contained" selected.
Once you have that file, use Compressor to create any non ProRes deliverable.
x

Image resize is less than acceptable

I really like Motion, but am dissapointed in its ability to resize image elements. When you get down to a small percentage the quality goes downhill. I'm guessing that the resampling is not the best. On a PSA tag I wanted a logo to start at bug size and then come up to around 45% at the end of the spot. Resizing a 720 x 480 PSD file to 22% left the image very aliased. I tried the same layout in FCP and in Boris Red with superior results. I have posted the results here:
www.leebergermedia.com/compare.htm
I tried different image formats with the same results. Anyone else having this issue? I'll post this in Apple feedback as well.
Lee
www.leebergermedia.com
G5 2.0, 4 GB RAM Mac OS X (10.4.4) FCP 5.x, XServe RAID, AJA Io
G5 2.0, 4 GB RAM Mac OS X (10.4.3) FCP 5.x, XServe RAID, AJA Io
G5 2.0, 4 GB RAM Mac OS X (10.4.3) FCP 5.x, XServe RAID, AJA Io
G5 2.0, 4 GB RAM Mac OS X (10.4.4) FCP 5.x, XServe RAID, AJA Io

Under Project Properties, have you tried setting your Render Settings to Antialiasing Method: Best with the Use dithering checked?
Patrick

Audiobooks - so far Apple's support has been less than helpfull.

I lost a bunch of audiobooks (hard drive failure) and my backups were wiped out by my son. :/ Does anyone know how to download audiobooks? I got a reply for support, that was literally the 'cut and paste' response, but thus far - nothing has come up (it's not showing in purchases... - tho everything else is...)

There's only one way to find out what Apple might do in your case. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
I will say though that I've had two iPads and an iPhone and my wife also has an iPhone. Total use time is 6-7 years and we've never had a cable tear or fail.

HT2978 my earphones just broke, will apple store replace them for free if i have apple car and has been less than a year since i bought the phone ?

please help

There's only one way to find out what Apple might do in your case. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
I will say though that I've had two iPads and an iPhone and my wife also has an iPhone. Total use time is 6-7 years and we've never had a cable tear or fail.

Im receiving the "3d features require a minimum of 512mb of vRAM. photoshp has detected less than that on your system" message.

I have updated my drivers and my specs are:
i7 2600 CPU
amd radeon 7800 gpu
& 16 gb of ram.
I can see that openGL is disabled and the graphics processor settings under performance is grayed out. Ive been searching across the web for the past few weeks, tried previous drivers for my gpu and older photoshop versions and nothing seems to work. It's extremely aggravating because i am able to use several other 3d applications along with gaming without a problem. For some reason, photoshop just doesn't want to work. I'd appreciate any feedback or advice towards my next step in solving this.
[moved to Photoshop - JTS]

Ask in the PS forum.
Mylenium

Less than Useless

So for this newsgroup has been less than useless. Lots of questions, no
answers at all.
Has ANYONE gotten 6.0 to install under RH 7.1?
Why do you end up with /tmp/install.dir.xxx/Solaris/resource/jre.tar.Z?

For some reason not vouchsafed to us mortals, Red Hat 7.1 partitions the
hard drive by major
nodes in the directory tree - "/home" gets a partition, "/usr" gets one,
"/var" gets one, etc.
and the leftovers (such as /tmp) are crammed into a miniscule "/"
partition. You can see this
by issuing the "df" command. I did the following:
mkdir /home/bea_tmp
export IATEMPDIR=/home/bea_tmp
then installed the package. Finally, a
ulimit -s 2048
is required before actually starting WebLogic - otherwise the Java VM's
stack
overflows and it segfaults.
You can safely delete the IATEMPDIR after installation - it should be
empty.
Michael Girdley wrote:
>
Here's a workaround previously posted to the newsgroup:
"Glen Austin" <[email protected]> wrote in message
news:[email protected]...
Found it. Same problem as on Oracle 8.1.7 on RedHat 7.1.
1. Install the compat* RPMs from the RedHat 7.1 CD1 and CD2. These RPMs
allow compatibility with RedHat 6.2.
2. Put the following two statements in your environment prior to running
the install.
export LD_ASSUME_KERNEL=2.2.5
. /usr/i386-glibc21-linux/bin/i386-glibc21-linux-env.sh
These two statements will allow you to run your shell in a 6.2compatibility
mode, for glibc 2.1.3 instead of the new glibc 2.2.2 libs.
It sounds to me like Sun needs to update the JDKs to support the new glibc
and the 2.4 kernel. I'm not sure this is even BEA's problem?
Glen Austin
OmniSYS, Inc.
"Glen Austin" <[email protected]> wrote in message
news:[email protected]...
I installed jdk 1.3.1 from java.sun.com on a RedHat 7.1 O/S.
Originally, I was not pointing to the JDK correctly. I fixed the PATH,
CLASSPATH, JAVA_HOME, JAVA_PATH to point to the jdk1.3.1 dir.
Then I got an error saying that cut could not be found in /usr/bin, so I
ln -s /bin/cut cut in the /usr/bin directory.
I ran the install script a 3rd time and I'm seeing a [<defunct>] for myJava
VM in a ps -aef entry, which is in the process list along with the WLS
6.0
SP1 install bin file. I will try it one more time, but it's not looking
good.
Glen Austin
"Henri Jubin" <[email protected]> wrote in message
news:[email protected]...
You need to install the JDK 1.3.1 to have wls 6.0 working.
The JDK could be found at the developpers zone at javasoft.
root <[email protected]> wrote:
i tried installing the wls by using the command :
sh weblogic600sp1_linux.bin
i got the message ,
"Preparing to install..."
and thats where it stops !
any ideas ??
cheers
Pac
There's a couple other possible solutions listed here in the group as well.
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
Buy the only book covering J2EE & WebLogic 6:
http://www.amazon.com/exec/obidos/ASIN/0130911119/learnweblogic/102-1778325-
4765749
"Steve Ahlstrom" <[email protected]> wrote in message
news:[email protected]...
I've got 10G+ free -- that's not the problem.
I've seen many, MANY messages complaining about this particular problem
over the last few weeks and not seen one offering a resolution.
In article <[email protected]>, [email protected]
says...
This may be because you don't have enough disk space allocated
under the directory in which the installer is trying to unzip
the JRE part of your install. How much free space do you have on
the disk corresponding to your /tmp directory? You need 100s of
Mb free. If you haven't got enough you can set the IATEMPDIR
environment variable to a different directory which has more
space (e.g. export IATEMPDIR=/usr/tmp).
I agree with you this newsgroup tedns to be a bit short on answers. :-)
Chris
Steve Ahlstrom <[email protected]> wrote:
So for this newsgroup has been less than useless. Lots of questions,
no
answers at all.
Has ANYONE gotten 6.0 to install under RH 7.1?
Why do you end up with /tmp/install.dir.xxx/Solaris/resource/jre.tar.Z?

Keyword list image count is greater than metada keyword image count.

How do you get the image counts to be the same? I have looked through the images of the offending keywords and there are no check marks against other keywords. Also above the film strip the total of all images selected is less than the total images. This has been an upgrade from Elements 10 catalog. Thanks.

Thank you, but I need to start with a "clean slate" or at least a correct one. So I have persevered and found a solution, which may seem lengthy, but beats rebuilding the keyword structure image by image. I had numbers against parent keywords (should be zero) and incorrect numbers against child keywords, not all, but some cases of each. Dealing with the child keywords within a parent first and then the parent, the procedure I used was:-
1. Select child keyword
2. Select all
3. Create collection using keyword name for clarity
Repeat steps 1-3 for all child keywords within the parent keyword
4. Delete the parent keyword
5. Recreate the parent keyword
6. Recreate all child keywords within the parent keyword
7. Select a collection
8. Select all
9. Select the appropriate keyword and drag to an image
Repeat steps 7-9 for remaining collections
It appears to work and all the unaffected keywords are showing in each image!!!
The engineer in me is satisfied!

Restrict the LONG RAW Column with less than 32760 bytes in the SELECT

When i am trying to access a LONG RAW Dataype wchich has characters greter than 32760 bytes i am getting this error.
Error -6502: ORA-06502: PL/SQL: numeric or value error
I came to know that PL/SQL will only be able to access the first 32760 bytes of a LONG RAW. If we try to fetch a LONG RAW from the database into PL/SQL variable which exceeds the 32760 byte limit then we encountered the above error.
Can anyone tell to avoid this error can we write a query to restrict the output to get only those records which has LONG RAW length less than 32760 bytes.
Since we canot use utl_raw.length() in the Select Statement, is there any function to restrict the the records for less than 32760 Bytes only for LONG RAW datatype, so that i will not get any records for more than 32760 bytes and we will not get this error.
REquest you to please help.

Hi
we do not have an option of migrating the LONG RAW to BLOB or any kind of ALTER to the table.
We want to restrict the use of Records from the Table which has data for LONG RAW column less than 32760 bytes, so that we will not get the PL/SQL numberic Error
any function for LONG RAW that can be used in SQL like for varchar2 we can use
select length(NAME) < 100 from tb_emp+
i.e it will get records only which has NAME less than 100 characters.

SQL query to populate the records, the maximum processed should be less than 10 records per week.

Dear All,
I have a requirement, to write a SQL query to populate the records which are inserted less than 10 no of records.
The tables has the cretaed_date column and along with other key column which will have unique values.
Ex1: The user might have inserted records from application, per week basis, between the date range '01-jun-2013' - 08-jun-2013 , the no of records created by the user during this week may be less than 10 records or more.
But I want to populate the records by giving date range that too, it should pick the records the count which fall with in 10 records.
I dont want the query to populate the records if the user has inserted more than 10 records in a week.
Ex2:
User 1 has created 15 records during the week 1 ( the query should not populate this ).
User 2: has cretaed less than 10 records from the UI during the week 2. ( This details should get populated ).
Thanks

Use COUNT to find how many rows where inserted in a week.
If this does not answer your question then please read Re: 2. How do I ask a question on the forums? And provide necessary details.

JCA Adapter Less than Symbol in OSB 11.1.1.5

Hey everyone,
When trying to create a Business Service based off of a JCA Adapter created in JDeveloper for a custom query database call, I am having issues if the query has the less than symbol in it.
When generating the service, it gives me the following error:
WSDL and Service Resources can not be generated at this time, please try again.
Reason: error: Unexpected character encountered (lex state 9):
The less than symbol is properly escaped as & l t ;
Im using 11.1.15
Replace & with $amp; is not working...

When generating the service, it gives me the following errorWhat do you mean by "generating the service"? Where do you see the error? OEPE? Is that compilation time, deployment time or run time?
Database data should be escaped finely... Can you give us more details about your case?
Cheers,
Vlad

"Scale Images" has limited less than 180 files?

Similar Messages

Maybe you are looking for