Scale maintained in info records but not picking up in scheduling agreement

Hi,
We have maintained scales for PB00 in info record (subcontracting), this scale is picked up in Subcontracting Purchase Order.
But when we are trying to create Subcontracting scheduling agreement, this scale is not picked up by the system.
Why the system is picking up scales for PO but not for scheduling agrmment?
Regards,

Hey there,
Please check your InfoUpdate Indicator on the scheduling agreement.
The indicator determines which prices and conditions are suggested in future PO items.
Prices and conditions can apply to an entire purchasing organization or to a single plant within a purchasing organization.
For example, if you create a purchase order for a plant for which an info record has been defined at plant level, the purchase order is based on the conditions in the plant info record and not on the conditions that apply to the purchasing organization.
probably your info record is at the Porg level and not at the plant level and hence it's not picking it up.
Hope this helps,
Cheers,
Dhaval

Similar Messages

Purchase info record does not exists in purchase organization 1000

Hi experts,
          I have created a new enterprise structure in SAP. when i am creating a PO its picking the correct info record, but when i am doing GR, its giving the error as 'purchase info record does not exists in purchase organization 1000". I have maintained everything perfect. the only thing i have changed is I have moved the open and close period from 11-2002 to 12-2008 in MMPV.
         Please give me some suggestions, where it can go wrong.
Thanks & Regards,
Poorna.

Hi Guys,
          Thanks for all yours responses, Actually what deepak said was right, but in my IDES system i am not able to create new entries in assign plant to std purchase org. I found the database view for that, V_001W_E its for table T001W. So i looked into that table i found that std purchase org was given as 1000. i made direct entries in that table, i thought the reason for this may be due to , that i copied plant from 1000. After making entries , i did not got the error message that was i am previously getting.
Thanks & Regards,
Ravi.

Purchase info record is not showing in po.

Hi all,
while creating purchase order i m giving purchase info record no but values from info record
is not updating in purchase order.plz help.
best regards.

Hi Nissinha,
There are so many ways to be analysed for the cause. Because PIR -Purchase info record:
Please check in order of priority while diagnosing and finding for the solution:
1. Check wether the PIR is created for the Vendor of that perticular material or not.
2. Check for the validity (valid upto which date) mentioned in the PIR
3. Check for the type of Info record (based on Item category) it is such as Standard, Sub contracting, etc
Hope it clarifies
Regards,
Sapsrin

Update Scales on Purchasing Info Record

Dear All,
I need to upload and update Scales on Purchasing Info Record.
Is there any BAPI or IDOC or Standard Batch/Direct Input (LSMW) or any Function module for this data upload.
Thanks in advance.

Thanks for your suggestion but I have lots of records and I couldn't use t-code MEKP to create those scales on PIR.
I won't only update existing scales on PIR but also I want to crate new scales on PIR. Is there anybody to suggest me any upload programme(BAPI, IDOC, Direct Input) for it?

File Sender channel polling successfully but not picking the files.

Hi All,
Can any one please provide any SAP Note Or any Alert mechanism for the File Sender channel in case where the XI channel in polling successfully at a particular folder from Source System but not picking the files. Thanks in Advance for the solution.

Hello,
If you want to know the reason for failure in picking up the file ,You can check the MessagingSystem monitoring for the reason behind failure.
http://host:httpport/MessagingSystem/monitor/monitor.jsp
For Alert may be you can follow prateek instructions.
HTH
Rajesh

Mass check scale price of info record

Hi there:
Is there any transaction or table to mass check scale price of info record?

Any updates?

RESTRICT PURACHSE ORDER CREATION IF INFO RECORD IS NOT MAINTAIN

HI,
I WANT TO RESTRICT THE USER FROM CREATING PURCHASE ORDER (ME21) IF HE HAS NOT UPDATED THE INFO RECORD FOR THE SAME.
I WOULD LIKE TO KNOW WHAT ARE THE FIELDS EFFECTED FROM WHICH TABLE AND HOW TO DO IT.
WHAT I KNOW IS INFO RECORD (ME11) AFFECTS EINA TABLE, BUT HOW TO RELATE THIS WITH P.O .
PLEASE HELP ME.
THANKS.

Thanks

Pipeline Materials (Info Record) Cost not getting picked in Standard Cost

Dear Team,
We are using the Pipeling Materials Concept in our client. Pipeline materials are procoured without referene to PO/Quotation.
Pipeline materials cost is not getting updated in the the standard cost estimate in cost roll-up.
All Sub-strategies options in the Valuation variant for price from Purchase Info Record are all wrt PO/Quotation.
How can i get my pipeline materials cost in the standard cost estimate.
Please guide.
Regards,
Vikrant Sood

Hi Vikrant,
Can you please advise us on how this issue was resolved? We're having the same error here.
Thanks and best regards,
Patrick

Customer material info records are not getting displayed in Sales order

Hi ,
We are upgrading our client sap system from ECC 5.0 to ECC 6.0 .We are now in the testing phase .An issue came up regarding customer material info records .
When we are creating a sales order using VA01, after entering Material number and order quantity for an item if we press the ordering party tab(before saving the sales order) the customer material info records (value in cutomer material number) are gettting displayed.But if we save the sales order we are not able to see the customer material info records.
kindly guide me in this issue .
Thanks in advance .
Nikhil

hi nikhil,
check the tick box in vov8 "read info record",and when you create sales order(va01),dont enter the material number enter the "customer material number" and see whether you are getting the material number.
and also go to (va02) and check whether you are getting the CMIR details.
pls explain me the problem in detail for my better understanding
regards
senya

A mov file plays in 'Get Info' preview, but not in Quicktime

I recorded a talk to web cam yesterday using Quicktime Pro and edited out the overlong pauses and fluffs to produce a series of .mov clips. Today I copied and pasted the clips into one .mov file in Quicktime Pro. The first 12 clips were fine.
The 13th clip opened as if it was audio only, but when played did not give any sound. An examination of the movie properties window showed about 3 minutes of audio and video, but neither were selected and could not be selected. When I tried to extract the video thinking I could then reassemble the file, I got a message saying that one of my raw clips was missing. The file was saved as self-contained and is about 7 MBytes. When it opens with the appearance of an audio file the last part of the clip I pasted in is highlighted as if selected; this corresponds to the file it is asking for.
Now I had deleted my raw data as my hard drive is nearly full and I was getting warnings to that effect. But as the files had been saved as self-contained rather than reference, this should surely not be a problem.
The strange thing is that if I select the .mov file and do a 'get info' then I can play the audio and video perfectly in the 'get info' preview plan, up until that final part corresponding to the missing file.
It looks like I have to do the last bit once more, but how can I keep the rest of it? I've tried deleting the final part and re-saving, but it still opens with the appearance of an audio file (which is silent when I play it). I can at least listen to what I said in the first recording, but it would be good to be able to keep the part that plays in 'get info'.
Any ideas of how I can get to it?
Any ideas.

Solution found.
I simply created a new .mov file and changed its name to the raw file that Quicktime told me was missing when I tried to open my edited clip.
The edited clip now opens and I've been able to delete the final portion (which appears selected when the clip opens) and save the rest, which plays fine.
This seems to have been a problem because in this particular clip I left the final portion I pasted in selected when I saved the file, even though I saved is as self-contained, not a reference file.

Conditon record is not picking in CRM

I have created new condition table with new combination and downloaded to CRM from R/3. After that i have new condition records with that combination and those records also came to CRM from R/3. But when i create service order this condtion record is not getting picked. Now can any one guide me like whether i missed anything.

Hi
You can do a Create PL simulation for that customer product to see why the condition records is not getting picked up. You can set a trace to see the access sequence and the condition type that gets picked up in the service order.
Ajay Gupta

Datas from info record should not overwrite BAPI_PO_CREATE parameters

Hi,
I intend to pass the netprice value while posting PO through BAPI_PO_CREATE.
but the values from info record overwriting the parameters supplied.
Please guide me how to avoid this overwritting.
Thanks,
Vempalli

and have you set a breakpoint at loop at input file and at bapi_po_create ??
perhaps there is something wrong with the amount of items passed ?
kind regards
arthur

How to make the price in PO to adopt from info-record and not changeable?

Hi Xperts,
Can somebody explain to me how to set the PO price to be adopted from the info-record and is NOT CHANGEABLE at the creation and change of PO screen. I know that i can configure the field selection for the PO type to be "price as display" only. Any other solution?
Thanks.

Hi!
tick the check box info-update at the item detail under master data tab in a PO.
its significance is as follows:-
Info record update
    Determines whether the prices and conditions of this purchase order item
    are suggested in future PO items.
Use
    Selecting InfoUpdate causes one of the following situations to occur:
        -   If just one info record (with or without plant) exists, it is
            updated.
        -   If no info record exists and "plant condition requirement" was
            specified in Customizing, an info record with plant is created.
            Otherwise, an info record without plant is created.
        -   If two info records exist (that is, one info record with plant
            and one without plant) the info record with plant is updated.
Dependencies
     You can specify that prices and conditions in purchasing info records
     are only allowed at plant level in the Purchasing IMG, under Conditions
     -> Define Condition Control at Plant Level.
Hope this helps you,
Regards,
Archit.

JDBC sender channel running but not picking up the data from sp

Hi,
One of the jdbc sender channels in production is running at its schedule time but it is not picking up the data from the sql side, we have checked with the sp side and they are saying that sp is running fine. No changes have been done in its configuration. Last message coming in RWB is Retry interval started but that is of 1 day and its already been 3 days. I tried by starting and stopping the channel but of no use. The channel was re activated but that also didn't help.
Please help, what can be the reason for the same.
thanks.

Hi,
The JDBCadapter ( The respective channel) is definitely locked in PI . Ideally for each polling interval a lock is being created and once the processing is over , the lock should be released/deleted automatically to allow further polling interval. If the lock is not released by the system automatically,further polling will not happen as expected. ( This may affect all sender JDBC adapters as well. I would recommend to do a check in all sender JDBC communication channels)
You can see/delete the locks in Visual admin.
Go to Server>Services->Locking adapter and click refresh
The entries for JDBC adapter ( with name $XIDBAD.JDBC2XI) should be deleted by selecting those particilar entries and click delete selected locks.
If you have more than one node, then same should be done in all server nodes.
The temprory solution would be creating/copy the existing channel in ID with same properties and assign it into particular sender agreement.
But, the lock may be created again which potentailly stops all your database interfaces. Hence i would suggest to use Disconnect From Database After processing of Each messages in Advanced tab in the sender JDBC adapter.
Hope this solves your issue.
PS: The same bahaviour would expected for all file adapter as well

Net price could not be changed in Scheduling agreement

Hi Gurus,
It has been observed that from last few days we are not able to change the Net Price in the scheduling agreement.
When we analysed the issue it was observed that system is fetching the condition type PB00.
Earlier system was fetching the standard pricing procedure and the gross price condition fetched was PBXX. In this case the net price field is editable.
There is no change in vendor schema group.
Can anybody throw some light on this as what would have happened.
Regards,
Rajesh Satope

It seems earlier for the line item the conditions was not maintained ,Due to this you are able to maintain the price for condition PBXX.
Now PB00 condition is automatically comming means ,there should be some info record or contract is maintained for the sku.So system is picking the price from any one of master data.Check in conditions from there you will come to know from where is system is picking the price.Change the price in master data then it will pick changed price.

Scale maintained in info records but not picking up in scheduling agreement

Similar Messages

Maybe you are looking for